AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-0427 SENSOR GP-TEMPERATURE 8-VOLT. PULSE WIDTH MODULATION AN ATTACHMENT 3176C INDUSTRIAL ENGINE


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING MOTOR GP
STARTING AID GP
STARTING MOTOR GP

INDUSTRIAL ENGINE 3176C INDUSTRIAL ENGINE 2AW
 3176C Industrial Engine 2AW00001-UP SEBP2708 3176C 2AW   (1997)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-TEMPERATURE
100-3055 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE
 

#SEBP27080560
 

131-0427: SENSOR GP-TEMPERATURE

131-0427 SENSOR GP-TEMPERATURE
8-VOLT. PULSE WIDTH MODULATION
AN ATTACHMENT
i00166447 SEBP2708
1310427 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-4550 BE SLEEVE  
2. 186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP27080561
 

138-2544: SILENCER-AIR STARTING

138-2544 SILENCER-AIR STARTING
REQUIRES AIR STARTING MOTOR WITH 1 1/4 - 11 1/2 NPT THREAD EXHAUST PORT
AN ATTACHMENT
i00604069 SEBP2708
1382544 SILENCER-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY)
 

#SEBP27080562
 

143-8872: STARTING AID GP-ETHER

143-8872 STARTING AID GP-ETHER
24 VOLT
AN ATTACHMENT
i00639452 SEBP2708
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  127-7443 [1] ATOMIZER AS  
    (ON 3412 INSTALL W/ORIFICE DIRECTED TOWARD FRONT OR REAR OF ENGINE)
    (ON 3408 INSTALL WITH ORIFICE DIRECTED DOWNWARD TOWARD ENGINE)
    (ON 3406 INSTALL WITH ORIFICE DIRECTED TOWARD ENGINE)
  3B-6768 [1] BUSHING-REDUCER  
  7N-2059 [1] CLAMP AS  
  5P-2948 [1] FITTING AS (VALVE ASSEMBLY)  
  102-8807 [1] KIT-CONNECTING PLUG (2-PIN)(ETHER STARTING AID)  
    (INCLUDES PLUG AS & WEDGE)
  3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
    (THIS RELAY MUST BE ISOLATED FROM ENGINE VIBRATION)
  102-8812 [1] SEAL  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)(ETHER)  
  7E-8866 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  3E-6333 [1] VALVE AS-SOLENOID (24-VOLT)  
  7N-9801 [1] GASKET  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)(ETHER START VALVE)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
   
  7N-0296 A [1] CYLINDER AS-ETHER (STARTING AID)  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP27080563
 

193-8091: STARTING AID GP-ETHER

193-8091 STARTING AID GP-ETHER
24 VOLT
AN ATTACHMENT
i01434316 SEBP2708
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-9995 [1] ATOMIZER-ETHER  
    (TO INLET MANIFOLD)
    (INSTALL WITH CROSS DRILLED HOLE IN TIP ALIGNED PARALLEL TO ENGINE CRANKSHAFT)
  7N-2059 [1] CLAMP AS  
    (TO CYLINDER)
  5P-2948 [1] FITTING AS (VALVE ASSEMBLY)  
  4K-9821 [1] SLEEVE  
  4K-9822 [1] NUT (5/16-24-THD)  
  7N-9801 A [1] GASKET (ETHER STARTING AID CYLINDER)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (VALVE ASSEMBLY)
    (INCLUDES PLUG ASSEMBLY & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (VALVE ASSEMBLY)
    (INCLUDES RECEPTACLE ASSEMBLY & PLUG)
  3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    (TO VALVE ASSEMBLY)
  2V-1713 [1] TAG-NOTICE (STARTING AID)(ETHER)  
  7E-8866 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
    (TO RELAY ASSEMBLY)
  7N-0140 [1] TUBE AS-COIL  
    (TUBE TO CONNECTOR)
  8N-3536 [1] TUBE-STEEL  
  3E-6332 [1] VALVE GP-ETHER STARTING (24-VOLT)  
  155-2261 [1] WEDGE-PLUG LOCK (2-PIN)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
   
    AVAILABLE REPLACEMENT PART(S):
  7N-0296 A CYLINDER AS-ETHER (STARTING AID)  
    (CAN BE PROCURED THROUGH YOUR LOCAL CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP27080564
 

105-5081: STARTING MOTOR GP-AIR

105-5081 STARTING MOTOR GP-AIR
PART OF 124-5776, 133-5882 STARTING MOTOR GP-AIR
Type 1
AN ATTACHMENT
i00481268 SEBP2708
1055081 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4375 [1] BALL BEARING  
2. 4N-4377 [1] PLATE-REAR END  
3. 4N-4383 [1] HOUSING-MOTOR  
4. 4N-4379 [1] DOWEL-CYLINDER  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
  4N-4388 [1] WASHER-SPECIAL  
  009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 4N-4392 [1] COVER AS-CASE  
10A. 4N-4393 [1] SEAL-LIP TYPE  
10B. 6J-2244 [1] SEAL-O-RING  
10C. 6V-1179 [1] SEAL-O-RING  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
13. 3P-0653 [1] SEAL-O-RING  
14. 4N-4403 [1] SPRING-RING  
15. 105-5138 [1] HOUSING  
16. 4N-4405 [1] CLUTCH AS-DRIVE  
17. 4N-4421 [1] SHAFT-DRIVE  
18. 105-5137 [1] PISTON  
19. 4N-4400 [1] RING-SHIFT  
20. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
21. 052-0512 [1] RING-RETAINING (INTERNAL)  
22. 4N-4386 [1] RETAINER-PINION  
23. 4N-4413 [1] PINION-ROTOR  
24. 9B-9774 [1] BALL BEARING  
25. 4N-4384 [1] GASKET-GEAR CASE  
26. 4N-4382 [1] PLATE-FRONT END  
27. 4N-4378 [1] CYLINDER  
28. 4N-4381 [1] ROTOR  
29. 4N-4376 [1] GASKET-HOUSING COVER  
30. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
31. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
32. 7B-2742 [12] BOLT (1/4-20X1.25-IN)  
33. 5P-0537 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 4N-4409 [1] DEFLECTOR AS (ROAD SPLASH)  
35. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
36. 6D-3787 [1] BEARING-ROLLER  
37. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
38. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [1] PLUG-PIPE  
 

#SEBP27080565
 

105-5081: STARTING MOTOR GP-AIR

105-5081 STARTING MOTOR GP-AIR
PART OF 133-5882 STARTING MOTOR GP-AIR
Type 2
AN ATTACHMENT
i03177168 SEBP2708
1055081 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4375 [1] BALL BEARING  
2. 4N-4377 [1] PLATE-REAR END  
3. 4N-4383 [1] HOUSING-MOTOR  
4. 4N-4379 [1] DOWEL-CYLINDER  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
7A. 4N-4388 [1] WASHER-SPECIAL  
7B. 009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 4N-4392 [1] COVER AS-CASE  
10A. 4N-4393 [1] SEAL-LIP TYPE  
10B. 6J-2244 [1] SEAL-O-RING  
10C. 6V-1179 [1] SEAL-O-RING  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
13. 3P-0653 [1] SEAL-O-RING  
14. 4N-4403 [1] SPRING-RING  
15. 105-5138 [1] HOUSING  
16. 4N-4405 [1] CLUTCH AS-DRIVE  
17. 4N-4421 [1] SHAFT-DRIVE  
18. 105-5137 [1] PISTON  
19. 4N-4400 [2] RING-SHIFT  
20. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
21. 052-0512 [1] RING-RETAINING (INTERNAL)  
22. 4N-4386 [1] RETAINER-PINION  
23. 4N-4413 [1] PINION-ROTOR  
24. 9B-9774 [1] BALL BEARING  
25. 4N-4384 [1] GASKET-GEAR CASE  
26. 4N-4382 [1] PLATE-FRONT END  
27. 4N-4378 [1] CYLINDER  
28. 4N-4381 [1] ROTOR  
29. 4N-4376 [1] GASKET-HOUSING COVER  
30. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
31. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
32. 7B-2742 C [9] BOLT (1/4-20X1.25-IN)  
33. 5P-0537 C [9] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 4N-4409 [1] DEFLECTOR AS (ROAD SPLASH)  
35. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
36. 6D-3787 [1] BEARING-ROLLER  
37. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
38. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [1] PLUG-PIPE  
39. 472-7200 [2] GASKET  
40. 472-7201 [2] GASKET-HOUSING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27080566
 

124-5776: STARTING MOTOR GP-AIR

124-5776 STARTING MOTOR GP-AIR
REQUIRES AIR SUPPLY SYSTEM CAPABLE OF 620 KPA MIN TO 1034 KPA MAX PRESSURE, 1L-5011 REQUIRED WHEN USED WITH SUPPLY SYSTEMS PRODUCING MORE THAN 1034 KPA AIR PRESSURE
FOR USE WITH RH MOUNTED FUEL FILTER
AN ATTACHMENT
i00517762 SEBP2708
1245776 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5081 Y [1] STARTING MOTOR GP-AIR  
2. 3B-7257 [1] BUSHING-REDUCER  
3. 3B-6555 [2] ELBOW (1 IN)  
4. 9L-4652 I [1] HOSE AS  
5. 4B-7770 [1] TEE  
6. 4D-3967 [1] BUSHING-REDUCER  
7. 6V-1813 [1] FITTING  
8. 4N-3410 [1] VALVE AS-CONTROL (STARTING)  
  2W-0629 [1] KNOB-ENGINE START  
9. 6B-8129 [2] NIPPLE-PIPE  
10. 3P-6048 I [1] HOSE AS  
11. 8T-9107 [1] TEE (96.5CM)  
12. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
13. 2P-1314 [1] CONNECTOR  
14. 6D-3479 [1] CLIP (14.29MM ID)  
15. 118-9142 [1] BRACKET  
16. 4H-7869 [1] GASKET  
17. 8S-2332 [2] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
18. 7J-8902 [1] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
19. 2S-5658 [1] WASHER-HARD (17X29X3-MM THK)  
20. 9S-5828 [1] U-BOLT (1/4-20-THD)  
21. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
22. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 6N-3899 [1] SPACER  
24. 7M-9544 [1] VALVE (AIR STARTING MOTOR)  
25. 6B-8128 [1] NIPPLE-PIPE  
26. 1L-2279 [1] ELBOW (3/8 IN)  
27. 141-7106 Y [1] LUBRICATOR GP-AIR MOTOR  
28. 6K-1972 [1] ELBOW-FLARED (1/4 NPT)  
29. 3B-6498 [1] ELBOW (1 IN)  
30. 5P-4479 [1] ELBOW (FLARED-LONG)(90 DEGREES)  
31. 5J-7303 [2] ELBOW (FLARED)  
32. 4W-4536 I [1] HOSE AS  
33. 7V-1037 I [1] HOSE AS  
34. 7X-0902 [1] CONNECTOR (9/16-18 STR THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080567
 

133-5882: STARTING MOTOR GP-AIR

133-5882 STARTING MOTOR GP-AIR
LH MOUNTED, REQUIRES AIR SUPPLY SYSTEM CAPABLE OF 620-KPA TO 1034-KPA MAX AIR PRESSURE, 1L-5011 REQUIRED WHEN USED WITH SUPPLY SYSTEMS PRODUCING MORE THAN 1034-KPA AIR PRESSURE
Type 1
AN ATTACHMENT
i00503142 SEBP2708
1335882 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5081 Y [1] STARTING MOTOR GP-AIR  
2. 3B-7257 [1] BUSHING-REDUCER  
3. 3B-6555 [2] ELBOW (1 IN)  
4. 9L-4652 I [1] HOSE AS  
5. 4B-7770 [1] TEE  
6. 4D-3967 [1] BUSHING-REDUCER  
7. 6V-1813 [1] FITTING  
8. 4N-3410 [1] VALVE AS-CONTROL (STARTING)  
  2W-0629 [1] KNOB-ENGINE START  
9. 6B-8129 [2] NIPPLE-PIPE  
10. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
11. 6D-3479 [1] CLIP (14.29MM ID)  
12. 118-9142 [1] BRACKET  
13. 4H-7869 [1] GASKET  
14. 8S-2332 [2] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
15. 7J-8902 [1] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
16. 2S-5658 [1] WASHER-HARD (17X29X3-MM THK)  
17. 9S-5828 [1] U-BOLT (1/4-20-THD)  
18. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 6N-3899 [1] SPACER  
21. 7M-9544 [1] VALVE (AIR STARTING MOTOR)  
22. 6B-8128 [1] NIPPLE-PIPE  
23. 1L-2279 [1] ELBOW (3/8 IN)  
24. 141-7106 Y [1] LUBRICATOR GP-AIR MOTOR  
25. 6K-1972 [1] ELBOW-FLARED (1/4 NPT)  
26. 3B-6498 [1] ELBOW (1 IN)  
27. 5P-4479 [1] ELBOW (FLARED-LONG)(90 DEGREE)  
28. 5J-7303 [2] ELBOW (FLARED)  
29. 4W-4536 I [1] HOSE AS  
30. 7V-1037 I [1] HOSE AS  
31. 8T-9107 [1] TEE  
32. 2P-1314 [1] CONNECTOR  
33. 7N-2539 I [1] HOSE AS  
34. 7X-0902 [1] CONNECTOR (9/16-18 STR THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080568
 

133-5882: STARTING MOTOR GP-AIR

133-5882 STARTING MOTOR GP-AIR
LH MOUNTED, REQUIRES AIR SUPPLY SYSTEM CAPABLE OF 620-KPA TO 1034-KPA MAX AIR PRESSURE, 1L-5011 REQUIRED WHEN USED WITH SUPPLY SYSTEMS PRODUCING MORE THAN 1034-KPA AIR PRESSURE
Type 2
AN ATTACHMENT
i01330443 SEBP2708
1335882 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5081 Y [1] STARTING MOTOR GP-AIR  
2. 3B-7257 [1] BUSHING-REDUCER  
3. 3B-6555 [2] ELBOW  
4. 9L-4652 I [1] HOSE AS  
5. 4B-7770 [1] TEE  
6. 4D-3967 [1] BUSHING-REDUCER  
7. 6V-1813 [1] FITTING  
8. 4N-3410 [1] VALVE AS-CONTROL (STARTING)(AIR)  
  2W-0629 [1] KNOB-ENGINE START (AIR STARTING MOTOR)  
9. 6B-8129 [2] NIPPLE-PIPE  
11. 6D-3479 [1] CLIP  
12. 118-9142 [1] BRACKET  
13. 4H-7869 [1] GASKET  
14. 176-2543 [2] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
15. 3E-8034 [1] BOLT (5/8-11X1.5-IN)  
16. 7X-0591 [1] WASHER-HARD (17X29X3-MM THK)  
17. 9S-5828 [1] U-BOLT (1/4-20-THD)  
18. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 6N-3899 [1] SPACER  
21. 7M-9544 [1] VALVE (AIR STARTING MOTOR)  
22. 6B-8128 [1] NIPPLE-PIPE  
23. 1L-2279 [1] ELBOW  
24. 172-0208 Y [1] LUBRICATOR GP-AIR MOTOR  
25. 6K-1972 [1] ELBOW-FLARED  
26. 3B-6498 [1] ELBOW  
27. 5P-4479 [1] ELBOW (FLARED-LONG)  
28. 5J-7303 [2] ELBOW  
29. 4W-4536 I [1] HOSE AS  
30. 7V-1037 I [1] HOSE AS  
31. 330-9750 [1] TEE AS  
  3E-7410 [1] ADAPTER  
  214-7568 [1] SEAL-O-RING  
32. 360-3667 [1] ADAPTER AS  
  2P-1314 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
33. 172-4288 I [1] HOSE AS  
34. 357-4616 [1] ADAPTER AS  
  7X-0902 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
35. 7K-9197 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080569
 

102-5836: STARTING MOTOR GP-ELECTRIC

102-5836 STARTING MOTOR GP-ELECTRIC
24-VOLT. STARTING AID RECOMMENDED BELOW 0-DEG CELSIUS (32-DEG F)
Type 1
FOR USE WITH 24-VOLT SYSTEM AND LH STARTER MOUNT FLYWHEEL HOUSING, REQUIRES: SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
i00466356 SEBP2708
1025836 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 4H-7869 C [1] GASKET  
3. 6V-5539 CY [1] STARTING MOTOR GP-ELECTRIC  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Position Sensor Group (Throttle) {1913}
1999/07/01
Coolant Sensor Installation Service Notes {5574}
2008/07/07
New Speed Timing Sensor Available {1912}
2006/04/17
A New Speed-Timing Sensor is Available {1912}
2006/07/03
Operation and Maintenance Manual
Overspeed
3176C and 3196 Industrial Engines
Engine Speed/Timing Sensors - Check/Clean/Calibrate
3176C and 3196 Industrial Engines
Speed Sensing Loss Alarm
3176C and 3196 Industrial Engines
Special Instruction
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Specifications
Turbocharger Outlet Pressure Sensor
3176C and 3196 Industrial Engines
Magnetic Pickup
3176C and 3196 Industrial Engines
Inlet Air Temperature Sensor
3176C and 3196 Industrial Engines
Speed/Timing Sensor
3176C and 3196 Industrial Engines
Engine Oil Pressure
3176C and 3196 Industrial Engines
Atmospheric Pressure Sensor
3176C and 3196 Industrial Engines
Coolant Temperature Sensor
3176C and 3196 Industrial Engines
Engine Oil Pressure Sensor
3176C and 3196 Industrial Engines
Fuel Temperature Sensor
3176C and 3196 Industrial Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
Speed/Timing - Test
3176C, 3406E and 3456 Industrial Engines
Sensor Supply - Test
3176C, 3406E and 3456 Industrial Engines
Sensor Signal (Analog, Active) - Test
3176C, 3406E and 3456 Industrial Engines
Throttle Position Sensor - Calibrate
3176C, 3406E and 3456 Industrial Engines
Timing - Calibrate
3176C, 3406E and 3456 Industrial Engines
Coolant Level - Test
3176C, 3406E and 3456 Industrial Engines
Sensor Signal (PWM) - Test
3176C, 3406E and 3456 Industrial Engines
Disassembly and Assembly
Electronic Control Module (ECM)
3176B MARINE ENGINE
Personality Module (PM)
3176B MARINE ENGINE
Liquid Level Sensor
3176B MARINE ENGINE
Oil Pressure Sensor
3176B MARINE ENGINE
Water Temperature Sensor
3176B MARINE ENGINE
Boost Pressure Sensor
3176B MARINE ENGINE
Inlet Air Temperature Sensor
3176B MARINE ENGINE
Atmospheric Pressure Sensor
3176B MARINE ENGINE
Speed/Timing Sensor
3176B MARINE ENGINE
Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Industrial Engines
Speed/Timing Sensor - Remove and Install
3176C and 3196 Industrial Engines
Coolant Temperature Sensor - Remove and Install
3176C and 3196 Industrial Engines

Caterpillar Parts SIS Catalog 3176C :

SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
100-3055 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
7W-3354 SENSOR GP-SPEED
SENSOR GP-SPEED
4P-5820 SENSOR GP-SPEED
SENSOR GP-SPEED
2W-8918 SENSOR GP-SPEED
SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
SENSOR GP-SPEED
129-6628 SENSOR GP-SPEED
SENSOR GP-PRESSURE
3E-6114 SENSOR GP-PRESSURE
SILENCER-AIR STARTING
138-2544 SILENCER-AIR STARTING
143-8872 STARTING AID GP-ETHER
193-8091 STARTING AID GP-ETHER
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
124-5776 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
133-5882 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
133-5882 STARTING MOTOR GP-AIR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.