AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-7129 STARTING MOTOR GP-ELECTRIC S/N 2AW1345-UP 12-VOLT. STARTING AID RECOMMENDED BELOW 0 DEG CELSIUS (32 DEG F) ALSO AN ATTACHMENT 3176C


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
BATTERY GP
SWITCH GP
STARTING MOTOR GP
WIRING GP

INDUSTRIAL ENGINE 3176C INDUSTRIAL ENGINE 2AW
 3176C Industrial Engine 2AW00001-UP SEBP2708 3176C 2AW   (1997)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
9X-4452 STARTING MOTOR GP-ELECTRIC
9Y-7129 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
9Y-7129 STARTING MOTOR GP-ELECTRIC
VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
 

#SEBP27080600
 

9Y-7129: STARTING MOTOR GP-ELECTRIC

9Y-7129 STARTING MOTOR GP-ELECTRIC
S/N 2AW1345-UP
12-VOLT. STARTING AID RECOMMENDED BELOW 0 DEG CELSIUS (32 DEG F)
ALSO AN ATTACHMENT
i01602766 SEBP2708
9Y7129 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 207-1537 CY [1] STARTING MOTOR GP-ELECTRIC  
3. 4H-7869 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080601
 

3N-7056: SUPPORT GP-BATTERY

3N-7056 SUPPORT GP-BATTERY
FLOOR TYPE, 2-BATTERY
AN ATTACHMENT
i00366670 SEBP2708
3N7056 SUPPORT GP-BATTERY Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-7055 [1] BOARD  
2. 3N-7054 [1] SUPPORT AS-BATTERY  
 

#SEBP27080602
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -AIR SHUTOFF
24-VOLT
PART OF 163-2587 SHUTOFF GP-AIR
AN ATTACHMENT
i01763082 SEBP2708
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 012-0380 [2] LOCKWASHER (6.5X12.5X1.6-MM THK)  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP27080603
 

1L-5011: VALVE GP-AIR STARTING

1L-5011 VALVE GP-AIR STARTING
REQUIRED WHEN AIR SUPPLY PRESSURE EXCEEDS 1034 KPA. REGULATING AND PRESSURE REDUCING
FOR USE WITH @@@@@133-5882@@@@@, AIR STARTING MOTOR
AN ATTACHMENT
i00351962 SEBP2708
1L5011 VALVE GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-9048 [1] NUT-PLATED JAM (7/16-14-THD)  
2. 1H-9569 [1] BUTTON-SPRING  
3. 1L-9049 [1] SPRING-PRESSURE  
4. 1L-9060 [1] BUTTON  
5. 1H-9572 [1] PLATE-PRESSURE  
6. 1L-9064 [1] PISTON AS  
7. 7L-8705 [1] CYLINDER  
8. 1L-9067 [1] SPRING-PISTON  
9. 1H-9580 [1] GASKET-PLUG  
10. 1L-9069 [1] PLUG AS  
11. 1L-9066 [1] SCREEN-STRAINER (AIR STARTING VALVE)  
12. 1L-9063 [1] DIAPHRAGM  
13. 1L-9068 [1] BODY-VALVE  
14. 1L-9062 [6] BOLT (3/8-24X1.5-IN)  
15. 1L-9059 [1] HOUSING-SPRING  
16. 0T-0320 C [1] BOLT (7/16-14X1.25-IN)  
   
  1B-4203 F [6] NUT-FULL (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP27080604
 

117-2759: WIRING GP-ELECTRONIC CONTROL

117-2759 WIRING GP-ELECTRONIC CONTROL
S/N 2AW1-450
i00492732 SEBP2708
1172759 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-2763 Y [1] HARNESS AS-ENGINE  
2. 8M-2773 [1] CLIP  
3. 6V-8214 M [2] BOLT (M6X1X20-MM)  
4. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
5. 4K-8864 [2] CLIP  
6. 3S-2093 [1] STRAP-CABLE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080605
 

142-8465: WIRING GP-ELECTRONIC CONTROL

142-8465 WIRING GP-ELECTRONIC CONTROL
S/N 2AW1-214
i00656250 SEBP2708
1428465 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8462 [1] HARNESS AS-WIRING (ELECTRONIC CONTROL)  
  110-6845 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 142-8466 [1] BRACKET  
3. 131-5526 [1] FASTENER GP-WIRING HARNESS  
4. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
7. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
8. 0S-1594 [2] BOLT (3/8-16X1-IN)  
9. 7G-6756 [1] SPACER  
10. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
11. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 6V-5842 M [1] BOLT (M10X1.5X40-MM)  
13. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
14. 6V-1889 [1] CLIP  
15. 6V-8214 M [2] BOLT (M6X1X20-MM)  
16. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
17. 4K-8864 [1] CLIP  
18. 4S-1962 [1] CLIP  
19. 8M-2773 [1] CLIP  
20. 3S-2093 [6] STRAP-CABLE  
21. 111-2350 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
  9X-1813 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
22. 3E-2332 [1] ELBOW  
23. 6V-5048 [1] SEAL-O-RING  
24. 6V-5049 [3] SEAL-O-RING  
25. 8J-1256 [1] CLIP  
26. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 SLEEVE (31-CM)  
27. 8L-2786 [3] SEAL-O-RING  
28. 111-2351 [1] SENSOR GP-PRESSURE (BOOST)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  9X-1386 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
29. 3E-7448 [1] CONNECTOR  
30. 3J-7354 [1] SEAL-O-RING  
31. 2V-3216 [1] CLIP  
32. 111-8125 [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
33. 102-2240 [1] SENSOR GP-TEMPERATURE (COOLANT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 SLEEVE (31-CM)  
34. 3K-0360 [1] SEAL-O-RING  
35. 6V-6609 [1] SEAL-O-RING  
36. 4P-8134 [1] CLIP  
37. 129-6628 Y [2] SENSOR GP-SPEED (PRIMARY AND AUXILIARY ENGINE)  
38. 102-2240 [1] SENSOR GP-TEMPERATURE (FUEL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 SLEEVE (31-CM)  
39. 111-8125 [1] SENSOR GP-PRESSURE (FUEL)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080606
 

142-8465: WIRING GP-ELECTRONIC CONTROL

142-8465 WIRING GP-ELECTRONIC CONTROL
S/N 2AW215-366
i00690402 SEBP2708
1428465 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8462 [1] HARNESS AS-WIRING (ELECTRONIC CONTROL)  
  110-6845 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 142-8466 [1] BRACKET  
3. 131-5526 [1] FASTENER GP-WIRING HARNESS  
4. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
7. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
8. 0S-1594 [2] BOLT (3/8-16X1-IN)  
9. 1M-3381 [1] SPACER (0.438X0.75X1-IN THK)  
10. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
11. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
13. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
14. 6V-1889 [1] CLIP  
15. 6V-8214 M [2] BOLT (M6X1X20-MM)  
16. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
17. 4K-8864 [1] CLIP  
18. 4S-1962 [1] CLIP  
19. 8M-2773 [1] CLIP  
20. 3S-2093 [6] STRAP-CABLE  
21. 111-2350 [2] SENSOR GP-PRESSURE (ENGINE OIL)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  9X-1813 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
22. 3E-2332 [1] ELBOW  
23. 6V-5048 [1] SEAL-O-RING  
24. 6V-5049 [2] SEAL-O-RING  
25. 8J-1256 [1] CLIP  
26. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  112-4550 SLEEVE (31-CM)  
27. 8L-2786 [3] SEAL-O-RING  
28. 111-2351 [1] SENSOR GP-PRESSURE (BOOST)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  9X-1813 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
29. 3E-7448 [1] CONNECTOR  
30. 3J-7354 [3] SEAL-O-RING  
31. 2V-3216 [1] CLIP  
32. 111-8125 [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
  9X-1813 E SLEEVE (34-CM)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8813 [1] SEAL  
33. 102-2240 [1] SENSOR GP-TEMPERATURE (COOLANT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 SLEEVE (31-CM)  
34. 3K-0360 [1] SEAL-O-RING  
35. 6V-6609 [1] SEAL-O-RING  
36. 4P-8134 [1] CLIP  
37. 129-6628 Y [2] SENSOR GP-SPEED (PRIMARY AND AUXILIARY ENGINE)  
38. 102-2240 [1] SENSOR GP-TEMPERATURE (FUEL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 SLEEVE (31-CM)  
39. 9X-0262 [1] ADAPTER  
40. 3E-6443 [1] CAP-CONNECTOR  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080607
 

142-8465: WIRING GP-ELECTRONIC CONTROL

142-8465 WIRING GP-ELECTRONIC CONTROL
S/N 2AW367-522
i00894568 SEBP2708
1428465 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8462 [1] HARNESS AS-WIRING (ELECTRONIC CONTROL)  
  110-6845 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 142-8466 [1] BRACKET  
3. 131-5526 [1] FASTENER GP-WIRING HARNESS  
4. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
7. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
8. 0S-1594 [2] BOLT (3/8-16X1-IN)  
9. 1M-3381 [1] SPACER (0.438X0.75X1-IN THK)  
10. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
11. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
13. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
14. 6V-1889 [1] CLIP  
15. 6V-8214 M [2] BOLT (M6X1X20-MM)  
16. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
17. 4K-8864 [1] CLIP  
18. 4S-1962 [1] CLIP  
19. 8M-2773 [1] CLIP  
20. 3S-2093 [6] STRAP-CABLE  
21. 111-2350 [2] SENSOR GP-PRESSURE (ENGINE OIL)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8813 [1] SEAL  
22. 3E-2332 [1] ELBOW  
23. 6V-5048 [1] SEAL-O-RING  
24. 6V-5049 [2] SEAL-O-RING  
25. 8J-1256 [1] CLIP  
26. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
27. 8L-2786 [3] SEAL-O-RING  
28. 111-2351 [1] SENSOR GP-PRESSURE (BOOST)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  9X-1813 SLEEVE (34-CM)  
  102-8813 [1] SEAL  
29. 3E-7448 [1] CONNECTOR  
30. 3J-7354 [3] SEAL-O-RING  
31. 2V-3216 [1] CLIP  
32. 150-7673 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
33. 102-2240 [1] SENSOR GP-TEMPERATURE (COOLANT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 SLEEVE (31-CM)  
34. 3K-0360 [1] SEAL-O-RING  
35. 6V-6609 [1] SEAL-O-RING  
36. 4P-8134 [1] CLIP  
37. 129-6628 Y [2] SENSOR GP-SPEED (PRIMARY AND AUXILIARY ENGINE)  
38. 102-2240 [1] SENSOR GP-TEMPERATURE (FUEL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 SLEEVE (31-CM)  
39. 9X-0262 [1] ADAPTER  
40. 3E-6443 [1] CAP-CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080608
 

142-8465: WIRING GP-ELECTRONIC CONTROL

142-8465 WIRING GP-ELECTRONIC CONTROL
S/N 2AW523-UP
i01070402 SEBP2708
1428465 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8462 [1] HARNESS AS-WIRING (ELECTRONIC CONTROL)  
  110-6845 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 142-8466 [1] BRACKET  
3. 131-5526 [1] FASTENER GP-WIRING HARNESS  
  8C-3334 [2] RIVET-TUBULAR  
4. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
7. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
8. 0S-1594 [2] BOLT (3/8-16X1-IN)  
9. 1M-3381 [1] SPACER (0.438X0.75X1-IN THK)  
10. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
11. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
13. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
14. 6V-1889 [1] CLIP  
15. 6V-8214 M [2] BOLT (M6X1X20-MM)  
16. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
17. 4K-8864 [1] CLIP  
18. 4S-1962 [1] CLIP  
19. 8M-2773 [1] CLIP  
20. 3S-2093 [6] STRAP-CABLE  
21. 161-9930 CY [2] SENSOR GP-PRESSURE (ENGINE OIL)  
22. 3E-2332 [1] ELBOW  
23. 6V-5048 [1] SEAL-O-RING  
24. 6V-5049 [2] SEAL-O-RING  
25. 8J-1256 [1] CLIP  
26. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (31-CM)  
27. 8L-2786 [1] SEAL-O-RING  
28. 161-9927 CY [1] SENSOR GP-PRESSURE (BOOST)  
29. 3E-7448 [1] CONNECTOR  
30. 3J-7354 [3] SEAL-O-RING  
31. 2V-3216 [1] CLIP  
32. 194-6722 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
33. 102-2240 [1] SENSOR GP-TEMPERATURE (COOLANT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (31-CM)  
34. 3K-0360 [1] SEAL-O-RING  
35. 6V-6609 [1] SEAL-O-RING  
36. 4P-8134 [1] CLIP  
37. 265-9033 Y [2] SENSOR GP-SPEED (PRIMARY AND AUXILIARY ENGINE)  
38. 102-2240 [1] SENSOR GP-TEMPERATURE (FUEL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (31-CM)  
39. 9X-0262 [1] ADAPTER  
40. 3E-6443 [1] CAP-CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27080609
 

160-4112: WIRING GP-ELECTRONIC CONTROL

160-4112 WIRING GP-ELECTRONIC CONTROL
S/N 2AW491-UP
i00920599 SEBP2708
1604112 WIRING GP-ELECTRONIC CONTROL Parts scheme 1604112 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 3176C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8462 [1] HARNESS AS-WIRING (ELECTRONIC CONTROL)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [6] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
2. 142-8466 [1] BRACKET  
3. 131-5526 [1] FASTENER GP-WIRING HARNESS  
3A. 8C-3334 [2] RIVET-TUBULAR  
4. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
7. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
8. 0S-1594 [2] BOLT (3/8-16X1-IN)  
9. 1M-3381 [1] SPACER (0.438X0.75X1-IN THK)  
10. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
11. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
13. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
14. 6V-1889 [1] CLIP  
15. 6V-8214 M [2] BOLT (M6X1X20-MM)  
16. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
17. 4K-8864 [1] CLIP  
18. 4S-1962 [1] CLIP  
19. 8M-2773 [1] CLIP  
20. 3S-2093 [6] STRAP-CABLE  
21. 161-9930 Y [1] SENSOR GP-PRESSURE (FUEL)  
21A. 161-9930 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
22. 3E-2332 [1] ELBOW  
23. 6V-5048 [2] SEAL-O-RING  
24. 6V-5049 [2] SEAL-O-RING  
25. 8J-1256 [1] CLIP  
26. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (31CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
27. 8L-2786 [1] SEAL-O-RING  
28. 161-9927 Y [1] SENSOR GP-PRESSURE (BOOST)  
29. 3E-7448 [1] CONNECTOR  
30. 3J-7354 [3] SEAL-O-RING  
31. 2V-3216 [1] CLIP  
32. 163-8530 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
33. 102-2240 [1] SENSOR GP-TEMPERATURE (FUEL)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (31CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33A. 102-2240 [1] SENSOR GP-TEMPERATURE (COOLANT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (31CM)  
34. 3K-0360 [1] SEAL-O-RING  
35. 6V-6609 [1] SEAL-O-RING  
36. 4P-8134 [1] CLIP  
37. 129-6628 Y [1] SENSOR GP-SPEED (AUXILIARY SPEED TIMING)  
37A. 129-6628 Y [1] SENSOR GP-SPEED (PRIMARY SPEED TIMING)  
39. 9X-0262 [1] ADAPTER  
40. 3E-6443 [1] CAP-CONNECTOR  
41. 9X-0261 [1] ADAPTER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Starting Motors Used {1453}
2002/05/01
Operation and Maintenance Manual
Starting Motor - Inspect
3176C and 3196 Industrial Engines
Cold Weather Starting
3176C and 3196 Industrial Engines
Starting the Engine
3176C and 3196 Industrial Engines
Air Starting
3176C and 3196 Industrial Engines
Cold Start Strategy
3176C and 3196 Industrial Engines
Air Starting Motor Lubricator Oil Level - Check - If Equipped
3176C and 3196 Industrial Engines
Air Tank Moisture and Sediment - Drain - If Equipped
3176C and 3196 Industrial Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starter Motor
3176B MARINE ENGINE
Starting Solenoid
3176B MARINE ENGINE
Air Starting Motor Pressure Regulating Valve
3176C and 3196 Industrial Engines
Air Starting Motor
3176C and 3196 Industrial Engines
Electric Starting Motor
3176C and 3196 Industrial Engines
Electric Starting Motor
3176C and 3196 Industrial Engines
Electric Starting Motor
3176C and 3196 Industrial Engines
Electric Starting Motor
3176C and 3196 Industrial Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Electric Starting Motor
3176B MARINE ENGINE
Electric Starting Motor - Remove and Install
3176C and 3196 Industrial Engines
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT

Caterpillar Parts SIS Catalog 3176C :

9Y-7129 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
9X-4452 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
8C-3649 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
8C-3644 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
8C-3593 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
8C-3592 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
7T-0795 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
7T-0794 STARTING MOTOR GP-ELECTRIC
SUPPORT GP-BATTERY
3N-7056 SUPPORT GP-BATTERY
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
WIRING GP-ELECTRONIC CONTROL
117-2759 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
142-8465 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
142-8465 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
142-8465 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
142-8465 WIRING GP-ELECTRONIC CONTROL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.