143-4924 AIR COMPRESSOR GP PART OF 148-7222 AIR COMPRESSOR GP ALSO AN ATTACHMENT 3126 TRUCK ENGINE

BASIC ENGINE

AIR COMPRESSOR GP

0. 143-4924 AIR COMPRE
1. 148-7222 AIR COMPRE
2. 148-7222 AIR COMPRE
3. 149-4915 AIR COMPRE
4. 156-9646 AIR COMPRE
5. 164-7559 AIR COMPRE
6. 164-9605 AIR COMPRE
7. 178-9497 AIR COMPRE

CRANKSHAFT GP

8. 196-9519 BEARING GP

BELT TIGHTENER GP

9. 124-7786 BELT TENSI
0. INFORMATION

TRUCK ENGINE 3126 TRUCK ENGINE 8HW
3126 Truck Engine ATAAC 8HW00001-UP SEBP2722 3126 8HW (1998)

BASIC ENGINE

AIR COMPRESSOR GP

126-8216 AIR COMPRESSOR GP

143-4924 AIR COMPRESSOR GP

148-7222 AIR COMPRESSOR GP

149-4915 AIR COMPRESSOR GP

#SEBP27220020

143-4924: AIR COMPRESSOR GP

AIR COMPRESSOR GP

143-4924 AIR COMPRESSOR GP
PART OF 148-7222 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

i00665119 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	2P-4358	[1]	FLANGE
2.	6D-1004	[1]	GASKET
3.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
4.	6V-0387	[1]	PLUG-PIPE
5.	4P-3977	[1]	GASKET-CYLINDER HEAD
6.	7E-8928	[1]	GASKET
7.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
8.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
9.	7E-8924	[1]	PISTON & ROD AS

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUDES: GASKET-BASE, CYL HEAD, SEAL-FRONT COVER, O-RING INSERT-BEARING, SLOTTED WASHER-REAR,FRONT WASHER-REAR,FRONT)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES: GASKET-UNLOADER, GOV, STRAINER, DISCHARGE, INLET, CYL HEAD, SPRING-UNLOADER, INLET, DIS-VALVE PISTON-UNLOADER
			STOP-SEAT-DIS-VALVE,INLET)
	7E-8925	[1]	KIT-STANDARD RING (AIR COMPRESSOR)
			(INCLUDES: RINGS-PISTONS,PSTN, PISTONS,PSTN SPACERS
	150-5146	[1]	KIT-UNLOADER (AIR COMPRESSOR)
	M		METRIC PART

#SEBP27220021

148-7222: AIR COMPRESSOR GP

AIR COMPRESSOR GP

148-7222 AIR COMPRESSOR GP
S/N 8HW1-474
PROVIDES TU-FLO 750 COMPRESSOR WITHOUT GOVERNOR AIR INLET IN TOP OF HEAD
CANNOT BE USED WITH AIR LINES
ALSO AN ATTACHMENT

i00659407 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	135-9819	[1]	SEAL-INTEGRAL
2.	4P-5106	[1]	BRACKET
3.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
4.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
5.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
6.	6V-5696 M	[2]	BOLT (M12X1.75X80-MM)
7.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	7C-3179	[1]	GEAR (50-TEETH)
9.	143-4924 Y	[1]	AIR COMPRESSOR GP
10.	090-7055 I	[1]	HOSE AS
11.	5P-4479	[1]	ELBOW (FLARED-LONG)
12.	6B-6682	[1]	NUT-FULL (3/4-16-THD)
13.	7X-0521	[1]	WASHER-HARD (20X36.5X5-MM THK)
14.	030-7946	[1]	ELBOW
15.	3J-7354	[1]	SEAL-O-RING
16.	6D-3479	[1]	CLIP
17.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP27220022

148-7222: AIR COMPRESSOR GP

AIR COMPRESSOR GP

148-7222 AIR COMPRESSOR GP
S/N 8HW475-UP
PROVIDES TU-FLO 750 COMPRESSOR WITHOUT GOVERNOR AIR INLET IN TOP OF HEAD
CANNOT BE USED WITH AIR LINES
ALSO AN ATTACHMENT

i01052375 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	135-9819	[1]	SEAL-INTEGRAL
2.	4P-5106	[1]	BRACKET
3.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
4.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
5.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
6.	6V-5696 M	[2]	BOLT (M12X1.75X80-MM)
7.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	7C-3179	[1]	GEAR (50-TEETH)
9.	164-7559 CY	[1]	AIR COMPRESSOR GP
10.	200-1196 I	[1]	HOSE AS
11.	2N-1287	[1]	ELBOW-FLARED
12.	6B-6682	[1]	NUT-FULL (3/4-16-THD)
13.	7X-0521	[1]	WASHER-HARD (20X36.5X5-MM THK)
14.	8C-6866	[1]	CONNECTOR
15.	061-7538	[1]	SEAL-O-RING
16.	6D-3479	[1]	CLIP
17.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP27220023

149-4915: AIR COMPRESSOR GP

AIR COMPRESSOR GP

149-4915 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 126-8216 AIR COMPRESSOR GP
AN ATTACHMENT

i00670364 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	2P-4358	[1]	FLANGE
2.	6D-1004	[1]	GASKET
3.	8T-6757	[1]	PLUG-PIPE
4.	141-1546	[1]	PLUG-PIPE
5.	4P-3977	[1]	GASKET-CYLINDER HEAD
6.	7E-8928	[1]	GASKET
7.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
8.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
9.	4P-3966	[1]	PISTON & ROD AS
10.	128-7759	[1]	ADAPTER AS
	128-7761	[3]	BOLT

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUDES FRONT COVER SEAL, FRONT MAIN & REAR BEARINGS, FRONT & REAR WASHERS,
			BEARING INSERTS, SLOTTED INSERTS, O-RING SEAL, CYLINDER HEAD & BASE GASKETS)
	164-7572	[1]	KIT-RING (AIR COMPRESSOR)
			(INCLUDES PISTON RINGS & SPACERS)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES UNLOADER PISTONS, UNLOADER SPRINGS, UNLOADER O-RING, UNLOADER GASKET, INLET VALVES, INLET VALVE STOPS,
			INLET VALVE SEATS, INLET SPRINGS, INLET GASKETS, DISCHARGE VALVES, DISCHARGE VALVE SEATS, DISCHARGE VALVE SPRINGS,
			DISCHARGE GASKET, GOVERNOR GASKET, STRAINER GASKET, & CYLINDER HEAD GASKET)
	M		METRIC PART

#SEBP27220024

156-9646: AIR COMPRESSOR GP

AIR COMPRESSOR GP

156-9646 AIR COMPRESSOR GP
FOR USE WITH @@@@@122-8931@@@@@, TU-FLO 550 COMPRESSOR WITH GOVERNOR, HIGH CAPACITY PUMPS, TOP OR SIDE AIR INLET
AN ATTACHMENT

i00849454 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	4N-9679	[1]	GOVERNOR AS-AIR COMPRESSOR
	2S-2923	[1]	COVER AS
2.	4P-5106	[1]	BRACKET
3.	4P-5389	[1]	VALVE AS-RELIEF (PRESSURE PURGE)(AIR COMPRESSOR)
4.	6L-1883	[1]	GASKET
5.	200-1196 I	[1]	HOSE AS
6.	135-9819	[1]	SEAL-INTEGRAL
7.	178-9497 Y	[1]	AIR COMPRESSOR GP
8.	193-4711	[1]	GEAR (50-TEETH)
9.	8C-6866	[1]	CONNECTOR
10.	2N-1287	[1]	ELBOW-FLARED
11.	061-7538	[1]	SEAL-O-RING
12.	4L-7318	[2]	LOCKWASHER
13.	4M-6424	[2]	BOLT (5/16-18X3-IN)
14.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	6D-3479	[1]	CLIP
16.	6V-5696 M	[2]	BOLT (M12X1.75X80-MM)
17.	6V-7742 M	[1]	NUT-FULL (M20X2.5-THD)
18.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
19.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
21.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
22.	8T-6757	[3]	PLUG-PIPE

			AVAILABLE REPAIR KIT(S):
	9M-0402	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES COVER, RING, GASKET, FILTER, SPRING, VALVE & GROMMETS)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP27220025

164-7559: AIR COMPRESSOR GP

AIR COMPRESSOR GP

164-7559 AIR COMPRESSOR GP
S/N 8HW475-UP
16.5 CFM AT 1250 RPM. TU-FLO 750
PART OF 148-7222 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

i01051779 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	2P-4358	[1]	FLANGE
2.	6D-1004	[1]	GASKET
3.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
4.	6V-0387	[1]	PLUG-PIPE
5.	4P-3977	[1]	GASKET-CYLINDER HEAD
6.	7E-8928	[1]	GASKET
7.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
8.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
9.	7E-8924	[1]	PISTON & ROD AS

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUDES SEALS, BEARINGS, WASHERS, INSERTS & GASKETS)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES GASKETS, PISTONS, SPRINGS, SEALS, VALVES & SEATS)
	164-7572	[1]	KIT-RING (AIR COMPRESSOR)
			(INCLUDES STANDARD, SEGMENT, & SPACER RINGS)
	150-5146	[1]	KIT-UNLOADER (AIR COMPRESSOR)
	M		METRIC PART

#SEBP27220026

164-9605: AIR COMPRESSOR GP

AIR COMPRESSOR GP

164-9605 AIR COMPRESSOR GP
S/N 8HW454-552
REQUIRES AIR LINES GP AND WATER LINES GP
FOR USE WITH HIGH CAPACITY HYDRAULIC PUMPS, TOP AIR INLET, WITHOUT GOVERNOR
ALSO AN ATTACHMENT

i01037576 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	4P-5106	[1]	BRACKET
2.	200-1196 I	[1]	HOSE AS
3.	135-9819	[1]	SEAL-INTEGRAL
4.	178-9497 Y	[1]	AIR COMPRESSOR GP
5.	193-4711	[1]	GEAR (50-TEETH)
6.	8C-6866	[1]	CONNECTOR
7.	2N-1287	[1]	ELBOW-FLARED
8.	061-7538	[1]	SEAL-O-RING
9.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	6D-3479	[1]	CLIP
11.	6V-5696 M	[2]	BOLT (M12X1.75X80-MM)
12.	6V-7742 M	[1]	NUT-FULL (M20X2.5-THD)
13.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
14.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
16.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
17.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP27220027

178-9497: AIR COMPRESSOR GP

AIR COMPRESSOR GP

178-9497 AIR COMPRESSOR GP
S/N 8HW454-552
13.2 CFM AT 1250 RPM
PART OF 156-9646, 164-9605 AIR COMPRESSOR GP
FOR USE WITH TU-FLO 550 COMPRESSOR WITH DRIVE GEAR, 31MM DIAMETER SHAFT GAUGE
ALSO AN ATTACHMENT

i01499112 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	2P-4358	[1]	FLANGE
2.	6D-1004	[1]	GASKET
3.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
4.	4P-3977	[1]	GASKET-CYLINDER HEAD
5.	7E-8928	[1]	GASKET
6.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
7.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
8.	4P-3966	[1]	PISTON & ROD AS
9.	128-7759	[1]	ADAPTER AS
	128-7760	[1]	ADAPTER
	128-7761	[1]	BOLT

			AVAILABLE REPAIR KIT(S):
	164-7572	[1]	KIT-RING (AIR COMPRESSOR)
			(INCLUDES RINGS)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES GASKETS, SPRINGS, SEATS, VALVES, PISTON, O-RING & STOP)
	180-5707	[1]	KIT-BEARING
			(INCLUDES GASKETS, WASHER, O-RING, BEARING & INSERT)
	M		METRIC PART

#SEBP27220028

196-9519: BEARING GP-MAIN

BEARING GP-MAIN

196-9519 BEARING GP-MAIN
FIELD INSTALLATION

i02103255 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Part No	Qty	Parts name
107-7708	[6]	BEARING-MAIN (STANDARD)
145-0162 AB		BEARING-MAIN (0.25-MM US)
145-0164 AB		BEARING-MAIN (0.5-MM US)
145-0168 AB		BEARING-MAIN (0.5-MM OS)
145-0170 AB		BEARING-MAIN (0.5-MM OS, 0.5-MM US)
212-4893	[1]	BEARING-THRUST (STANDARD)
229-5153 AB		BEARING-THRUST (0.25-MM US)
229-5154 AB		BEARING-THRUST (0.5-MM US)
229-5155 AB		BEARING-THRUST (0.5-MM OS)
229-5156 AB		BEARING-THRUST (0.5-MM OS, 0.5-MM US)
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED

#SEBP27220029

124-7786: BELT TENSIONER GP

BELT TENSIONER GP

124-7786 BELT TENSIONER GP
S/N 8HW1-552
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT

i00519271 SEBP2722

For full view, you need register

Parts for your 3126 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	120-7387	[1]	BRACKET-MOUNTING
2.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
3.	6V-5219 M	[3]	BOLT (M8X1.25X40-MM)
4.	123-1719	[1]	SUPPORT-COMPRESSOR
5.	8C-5748 M	[1]	BOLT (M8X1.25X55-MM)
6.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
7.	7E-3443	[1]	BUSHING-TERMINAL
8.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
9.	8T-4133 M	[3]	NUT (M10X1.5-THD)
10.	217-8938	[1]	BELT TENSIONER
11.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
12.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
13.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
14.	7W-3872	[2]	SLEEVE
15.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
16.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
17.	175-3225	[1]	BRACKET-PULLEY
18.	175-3223 Y	[1]	PULLEY GP-IDLER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION