AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

116-7994 STARTING AID GP-ETHER AN ATTACHMENT 3516B GEN SET ENGINE


ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
STARTING MOTOR GP

GEN SET ENGINE 3516B GEN SET ENGINE 1NW
 3516B Generator Set Engine 1NW00001-UP SEBP2736 3516B 1NW   (1998)

ELECTRICAL AND STARTING SYSTEM

STARTING AID GP
121-4718 STARTING AID GP
STARTING AID GP
138-1729 STARTING AID GP
STARTING AID GP-ETHER
116-7994 STARTING AID GP-ETHER
 

#SEBP27360770
 

116-7994: STARTING AID GP-ETHER

116-7994 STARTING AID GP-ETHER
AN ATTACHMENT
i00489374 SEBP2736
1167994 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3416 B [2] TUBE-STEEL  
2. 3T-3048 [2] CLIP AS  
3. 5N-6645 [6] MOUNT-FLEXIBLE  
4. 7C-0346 [2] BRACKET  
5. 7C-0347 [2] BRACKET  
6. 7C-0348 [2] BRACKET  
7. 7E-8961 [2] BRACKET  
8. 7N-2059 [2] CLAMP AS (CYLINDER)  
9. 7X-1078 [2] NOZZLE AS-ETHER  
10. 9X-7137 [2] VALVE AS-ETHER START  
    (EACH INCLUDES)
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  9X-7138 [1] FILTER & GASKET AS (ETHER STARTING AID)  
11. 9X-9584 [2] RESISTOR AS  
    (EACH INCLUDES)
  5P-6008 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  3T-3270 [1] WIRE AS (16-GA)  
12. 119-8959 [1] HARNESS AS-STARTING AID  
  7N-9738 [4] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7N-7780 [4] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  7N-7779 [4] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
13. 160-8765 [2] FITTING AS  
    (EACH INCLUDES)
  [1] FILTER (ETHER)  
14. 096-6166 [24] WASHER-HARD (4.5X9X1-MM THK)  
15. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
16. 0S-0509 [3] BOLT (3/8-16X0.75-IN)  
17. 0S-1594 [4] BOLT (3/8-16X1-IN)  
18. 4B-2043 [12] NUT (8-32-THD)  
19. 4B-3388 [8] BOLT (5/16-18X1.125-IN)  
20. 5M-2894 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 5P-0537 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 5S-0003 [8] NUT (5/16-18-THD)  
23. 6V-2686 [5] CLIP  
24. 7B-8167 [6] BOLT (1/4-20X1.625-IN)  
25. 7S-1197 [12] SCREW-MACHINE (8-32X0.5-IN)  
26. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
27. 9S-8750 [6] NUT-FULL (1/4-20-THD)  
   
  7X-1062 A [2] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP27360771
 

311-8104: STARTING MOTOR GP-AIR

311-8104 STARTING MOTOR GP-AIR
PART OF 311-8108 STARTING MOTOR GP-AIR
AN ATTACHMENT
i02867720 SEBP2736
3118104 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3916 [1] BALL BEARING  
2. 1L-8497 [1] RING-SNAP  
3. 6J-7855 [1] RING-RETAINING  
4. 5N-8383 [1] CYLINDER  
5. 5N-8375 [1] CUP-SPRING  
6. 6V-3935 [1] RING-RETAINING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 2W-6084 [1] GEAR AS-DRIVE (38, 24-TEETH)  
11. 5N-8387 [1] CASE-GEAR  
12. 5N-8424 [1] BULKHEAD  
13. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
14. 3B-4505 [8] LOCKWASHER  
15. 3J-7719 [1] RING-RETAINING (INNER)(INNER)  
16. 6V-3971 [1] RING-RETAINING (OUTER)  
17. 7F-8671 [1] BALL BEARING  
18. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
19. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
20. 6V-3959 [5] LOCKWASHER  
21. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
22. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
23. 7W-1650 [1] PINION-DRIVE (11-TEETH)  
24. 5N-8374 [1] SLEEVE-SPRING  
25. 5N-8380 [1] SPRING-PINION  
26. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
27. 8B-7624 [1] BALL BEARING  
28. 5N-8379 [1] SEAT-SPRING  
29. 5N-8372 [1] SPRING-RETURN  
30. 5N-8384 [1] SHAFT-DRIVE  
31. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
32. 5N-8363 [1] COVER AS  
33. 5N-8377 [1] BEARING-DRIVE SHAFT  
34. 5N-8373 [1] PISTON  
35. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
36. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
37. 5N-8365 [1] PLATE-FRONT END  
38. 6V-1394 [1] BALL BEARING  
39. 039-4317 [2] WASHER-SPRING  
40. 5N-8364 [1] HOUSING-MOTOR  
41. 7W-4154 [1] ROTOR  
42. 5N-8367 [1] PLATE-REAR END  
43. 5P-9514 [1] BALL BEARING  
44. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
  M   METRIC PART
 

#SEBP27360772
 

311-8105: STARTING MOTOR GP-AIR

311-8105 STARTING MOTOR GP-AIR
PART OF 311-8109 STARTING MOTOR GP-AIR
AN ATTACHMENT
i02822908 SEBP2736
3118105 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1650 [1] PINION-DRIVE (11-TEETH)  
2. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
3. 3B-4505 [8] LOCKWASHER  
4. 5N-8363 [1] COVER AS  
  4D-3118 [3] PLUG-PIPE  
5. 5N-8364 [1] HOUSING-MOTOR  
6. 5N-8384 [1] SHAFT-DRIVE  
7. 5N-8387 [1] CASE-GEAR  
8. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
9. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
10. 6V-3959 [4] LOCKWASHER  
11. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 1L-8497 [1] RING-SNAP (SMALL)  
14. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
15. 3J-7719 [1] RING-RETAINING (INNER)(INNER)  
16. 5N-8365 [1] PLATE-FRONT END  
17. 5N-8367 [1] PLATE-REAR END  
18. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
19. 5N-8372 [1] SPRING-RETURN  
20. 5N-8373 [1] PISTON  
21. 5N-8374 [1] SLEEVE-SPRING  
22. 5N-8375 [1] CUP-SPRING  
23. 5N-8377 [1] BEARING-DRIVE SHAFT  
24. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
25. 5N-8379 [1] SEAT-SPRING  
26. 5N-8380 [1] SPRING-PINION  
27. 5N-8381 [1] SPRING-CLUTCH  
28. 5N-8383 [1] CYLINDER  
29. 7W-4154 [1] ROTOR  
30. 5N-8424 [1] BULKHEAD  
31. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
32. 5N-9574 [1] JAW AS-CLUTCH  
33. 5P-9514 [1] BALL BEARING  
34. 6J-7855 [1] RING-RETAINING (LARGE)  
35. 6V-1394 [1] BALL BEARING  
36. 6V-3916 [1] BALL BEARING  
37. 6V-3935 [1] RING-RETAINING  
38. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
39. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
40. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
41. 6V-3971 [1] RING-RETAINING (OUTER)  
42. 7F-8671 [1] BALL BEARING  
43. 8B-7624 [1] BALL BEARING  
44. 039-4317 [2] WASHER-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, RINGS, SEALS & VANE)
  M   METRIC PART
 

#SEBP27360773
 

311-8108: STARTING MOTOR GP-AIR

311-8108 STARTING MOTOR GP-AIR
AN ATTACHMENT
i02952878 SEBP2736
3118108 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 8N-8446 [1] ELBOW  
3. 8N-8451 [1] GASKET  
4. 311-8104 Y [1] STARTING MOTOR GP-AIR  
5. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
6. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27360774
 

311-8109: STARTING MOTOR GP-AIR

311-8109 STARTING MOTOR GP-AIR -COUNTERCLOCKWISE ROTATION
AN ATTACHMENT
i02822896 SEBP2736
3118109 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 8N-8446 [1] ELBOW  
3. 8N-8451 [1] GASKET  
4. 311-8105 Y [1] STARTING MOTOR GP-AIR  
5. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
6. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27360775
 

382-9606: STARTING MOTOR GP-AIR

382-9606 STARTING MOTOR GP-AIR
PART OF 399-0633 STARTING MOTOR GP-AIR
AN ATTACHMENT
i04592176 SEBP2736
3829606 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 297-5479 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
2. 6K-1972 [4] ELBOW-FLARED  
3. 539-6084 [2] HOSE AS (AIR)  
4. 3M-7045 [1] PLUG (3/4-14 NPT-THD)  
   
    AVAILABLE REPAIR KIT(S):
  278-0513 [1] KIT-STARTER REPAIR  
    (INCLUDES STARTER DRIVE)
  385-1748 [1] KIT-ENGINE OVERHAUL  
    (INCLUDES 0-RINGS, BEARINGS, SCREWS, RING, SPACERS, SHIMS, ELEMENTS, SHAFTS, LOCTITE & WASHERS)
  465-8142 [1] KIT-SERVICE (CONTROLLER, O-RINGS, FASTENERS)  
    (INCLUDES LOCTITE)
  533-5902 [1] KIT-SERVICE  
    (INCLUDES RETAINER, RETAINER PLATE, SCREW, & SILENCER ELEMENT)
 

#SEBP27360776
 

399-0633: STARTING MOTOR GP-AIR

399-0633 STARTING MOTOR GP-AIR
AN ATTACHMENT
i05427570 SEBP2736
3990633 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8902 [3] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
2. 9Y-6089 [1] GASKET  
3. 382-9606 Y [1] STARTING MOTOR GP-AIR  
4. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27360777
 

4W-5107: STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR
PART OF 8N-8477 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
AN ATTACHMENT
i00109293 SEBP2736
4W5107 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
2. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
3. 3B-4505 [8] LOCKWASHER  
4. 5N-8363 [1] COVER AS  
  4D-3118 [3] PLUG-PIPE  
5. 5N-8364 [1] HOUSING-MOTOR  
6. 5N-8384 [1] SHAFT-DRIVE  
7. 5N-8387 [1] CASE-GEAR  
8. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
9. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
10. 6V-3959 [5] LOCKWASHER  
11. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 1L-8497 [1] RING-SNAP (SMALL)  
14. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
15. 3J-7719 [1] RING-RETAINING (INNER)  
16. 5N-8365 [1] PLATE-FRONT END  
17. 5N-8367 [1] PLATE-REAR END  
18. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
19. 5N-8372 [1] SPRING-RETURN  
20. 5N-8373 [1] PISTON  
21. 5N-8374 [1] SLEEVE-SPRING  
22. 5N-8375 [1] CUP-SPRING  
23. 5N-8377 [1] BEARING-DRIVE SHAFT  
24. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
25. 5N-8379 [1] SEAT-SPRING  
26. 5N-8380 [1] SPRING-PINION  
27. 5N-8381 [1] SPRING-CLUTCH  
28. 5N-8383 [1] CYLINDER  
29. 5N-8388 [1] ROTOR  
30. 5N-8424 [1] BULKHEAD  
31. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
32. 5N-9574 [1] JAW AS-CLUTCH  
33. 5P-9514 [1] BALL BEARING  
34. 6J-7855 [1] RING-RETAINING (LARGE)  
35. 6V-1394 [1] BALL BEARING  
36. 6V-3916 [1] BALL BEARING  
37. 6V-3935 [1] RING-RETAINING  
38. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
39. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
40. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
41. 6V-3971 [1] RING-RETAINING (OUTER)  
42. 7F-8671 [1] BALL BEARING  
43. 8B-7624 [1] BALL BEARING  
44. 039-4317 [2] WASHER-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, RINGS, SEALS & VANE)
  M   METRIC PART
 

#SEBP27360778
 

7C-3371: STARTING MOTOR GP-AIR

7C-3371 STARTING MOTOR GP-AIR -SINGLE
STANDARD ENGINE ROTATION
FOR USE WITH SAE "00" FLYWHEEL HOUSING
AN ATTACHMENT
i00404923 SEBP2736
7C3371 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-3372 Y [1] STARTING MOTOR GP-AIR  
2. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
3. 4H-7869 [1] GASKET  
4. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
5. 8N-8446 [1] ELBOW  
6. 8N-8451 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27360779
 

7C-3372: STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
PART OF 7C-3371 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5107@@@@@
AN ATTACHMENT
i00091625 SEBP2736
7C3372 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
2. 5N-8363 [1] COVER AS  
2A. 4D-3118 [3] PLUG-PIPE  
3. 039-4317 [2] WASHER-SPRING  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
6. 5N-8375 [1] CUP-SPRING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 3J-7719 [1] RING-RETAINING (INNER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 7X-0796 [5] LOCKWASHER (10.2X18.4X2.5-MM THK)  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 111-4399 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
37. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
38. 1L-8497 [1] RING-SNAP  
39. 6J-7855 [1] RING-RETAINING  
40. 6V-3935 [1] RING-RETAINING  
41. 3B-4505 [8] LOCKWASHER  
42. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
43. 6V-3971 [1] RING-RETAINING (OUTER)  
44. 5N-8374 [1] SLEEVE-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Cold Weather Starting
3500 and 3500B Engines
Systems Operation
Ether Control System
3500B Engines
Troubleshooting
MID 036 - CID 0545 - FMI 06 Ether Start Relay short to ground
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0545 - FMI 05 Ether Start Relay open/short to +batt
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0546 - FMI 06 Ether Hold Relay short to +batt
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0546 - FMI 05 Ether Hold Relay open/short to ground
3500B Engines and 3500 Engines with EUI Option
Ether Injection System
3500B Engines and 3500 Engines with EUI Option
Ether Injection System
3500 Engines

Caterpillar Parts SIS Catalog 3516B :

STARTING AID GP
138-1729 STARTING AID GP
121-4718 STARTING AID GP
SILENCER GP-AIR STARTING
8N-8486 SILENCER GP-AIR STARTING
SILENCER GP-AIR STARTING
112-6597 SILENCER GP-AIR STARTING
SENSOR GP-TEMPERATURE
449-3900 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
243-5752 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
195-2150 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
STARTING MOTOR GP-AIR
311-8104 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
311-8105 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
311-8108 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
311-8109 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
382-9606 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
399-0633 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3371 STARTING MOTOR GP-AIR

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.