AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

372-6684 COVER GP-VALVE MECHANISM S/N 6TB9857-UP ALSO AN ATTACHMENT 3406B ENGINE - MACHINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

ENGINE - MACHINE 3406B ENGINE - MACHINE 6TB
 3406C Industrial Engine 6TB09857-UP SEBP2737 3406B 6TB   (2018)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
117-3278 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
371-1668 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
372-6684 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
 

#SEBP27370130
 

372-6684: COVER GP-VALVE MECHANISM

372-6684 COVER GP-VALVE MECHANISM
S/N 6TB9857-UP
ALSO AN ATTACHMENT
i04326689 SEBP2737
3726684 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 361-0604 [1] COVER AS-ROCKER ARM  
2. 7W-7352 [2] BASE-VALVE MECHANISM COVER  
3. 361-0605 [1] COVER AS-ROCKER ARM  
4. 9L-8925 [26] BOLT (5/16-18X1.25-IN)  
5. 5P-5678 D SEAL (1.6-M EACH)  
  D   ORDER BY THE METER
 

#SEBP27370131
 

4N-2272: COVER GP-VALVE MECHANISM

4N-2272 COVER GP-VALVE MECHANISM
i00370134 SEBP2737
4N2272 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2985 [1] CAP AS-FILLER (ENGINE OIL)  
2. 7E-0329 C [2] BASE  
3. 361-0602 C [1] COVER AS-ROCKER ARM  
  5P-5678 BD SEAL  
  7C-6514 [2] ADAPTER  
  7E-0330 [1] COVER (ROCKER ARM)  
  8C-5196 [2] SEAL-O-RING  
4. 361-0605 C [1] COVER AS-ROCKER ARM  
  5P-5678 BD SEAL  
5. 9L-8925 [26] BOLT (5/16-18X1.25-IN)  
6. 5P-5678 BD SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP27370132
 

4N-4953: COVER GP-VALVE MECHANISM

4N-4953 COVER GP-VALVE MECHANISM
S/N 6TB9857-UP
FOR USE WITH AIR LINES FOR REAR EXHAUST TURBO
ALSO AN ATTACHMENT
i00122085 SEBP2737
4N4953 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0329 [2] BASE  
2. 9M-1974 B [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 361-0603 [1] COVER AS-ROCKER ARM  
3A. 7C-6514 [1] ADAPTER  
  8C-5196 [1] SEAL-O-RING  
  5P-5678 D SEAL (1.5-M)  
4. 9L-8925 [23] BOLT (5/16-18X1.25-IN)  
5. 5P-5678 BD SEAL (1.6-M EACH)  
6. 361-0605 [1] COVER AS-ROCKER ARM  
  5P-5678 D SEAL (1.5-M)  
7. 9L-8925 B [3] BOLT (5/16-18X1.25-IN)  
    -OR-
  1B-2790 B [3] BOLT (5/16-18X1.375-IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP27370133
 

7C-0730: COVER GP-VALVE MECHANISM

7C-0730 COVER GP-VALVE MECHANISM
S/N 6TB9857-UP
i00398104 SEBP2737
7C0730 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 361-0605 C [1] COVER AS-ROCKER ARM  
1A. 5P-5678 D SEAL (1.6-M EACH)  
  7C-9621 [2] PLUG  
  7E-0330 [1] COVER (ROCKER ARM)  
  8C-5196 [2] SEAL-O-RING  
2. 7E-0329 C [2] BASE  
3. 9L-8925 [26] BOLT (5/16-18X1.25-IN)  
4. 5P-5678 D SEAL (1.6-M EACH)  
5. 361-0602 C [1] COVER AS-ROCKER ARM  
  5P-5678 D SEAL (1.6-M EACH)  
5A. 7C-6514 [2] ADAPTER  
  7E-0330 [1] COVER (ROCKER ARM)  
  8C-5196 [2] SEAL-O-RING  
6. 6N-2985 [1] CAP AS-FILLER (ENGINE OIL)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP27370134
 

7W-7353: COVER GP-VALVE MECHANISM

7W-7353 COVER GP-VALVE MECHANISM
S/N 6TB9857-UP
i00158249 SEBP2737
7W7353 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5678 BD SEAL  
2. 7W-7352 [2] BASE-VALVE MECHANISM COVER  
3. 9L-8925 [26] BOLT (5/16-18X1.25-IN)  
4. 7C-6514 [1] ADAPTER  
  8C-5196 [1] SEAL-O-RING  
5. 361-0605 C [1] COVER AS-ROCKER ARM  
6. 361-0604 C [1] COVER AS-ROCKER ARM  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP27370135
 

9N-3618: COVER GP-VALVE MECHANISM

9N-3618 COVER GP-VALVE MECHANISM
S/N 6TB9857-UP
FOR USE WITH REAR EXHAUST TURBO
i00168837 SEBP2737
9N3618 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 361-0603 C [2] COVER AS-ROCKER ARM  
    (EACH INCLUDES)
1A. 5P-5678 D SEAL (1.5-M)  
1B. 7C-6514 [1] ADAPTER  
  7C-9621 [1] PLUG  
  7E-0330 [1] COVER (ROCKER ARM)  
  8C-5196 [1] SEAL-O-RING  
2. 6N-2985 [1] CAP AS-FILLER (ENGINE OIL)  
3. 7E-0329 C [2] BASE  
4. 9L-8925 [26] BOLT (5/16-18X1.25-IN)  
5. 5P-5678 D SEAL (1.6-M EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP27370136
 

430-2593: CRANKSHAFT AS

430-2593 CRANKSHAFT AS
PART OF 4N-0741 CRANKSHAFT GP
i05941503 SEBP2737
4302593 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0684 [1] DOWEL  
2. 7S-5005 [1] DOWEL  
3. 1W-9302 [1] GEAR-CRANKSHAFT (80-TEETH)  
 

#SEBP27370137
 

4N-0741: CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
Type 1
i00122071 SEBP2737
4N0741 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
2. 6I-1453 [1] CRANKSHAFT AS  
2A. 1W-9302 [1] GEAR-CRANKSHAFT (80-TEETH)  
2B. 7S-5005 [1] DOWEL  
2C. 4N-0684 [1] DOWEL  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370138
 

4N-0741: CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
Type 2
i05941433 SEBP2737
4N0741 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
2. 430-2593 Y [1] CRANKSHAFT AS  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJY [1] KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370139
 

202-1257: CYLINDER BLOCK AS

202-1257 CYLINDER BLOCK AS
S/N WJA1-UP; 6TB20165-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
i01570723 SEBP2737
2021257 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8081 [7] CAP-CRANKSHAFT BEARING  
2. 167-8083 [14] BOLT (7/8-14X7.5-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

Information:

Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
New Head Gasket Available; Head Gasket Replacement Guidelines
1989/02/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
New Valve Lifter Improves Oil Flow To Top Of Engine
1990/04/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Stronger Cylinder Head Bolts Used{1100}
1996/05/09
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
A New Tool Is Used to Insert the Valve Lifter Guide Spring into Certain Commercial Engines {0703, 1102}
2012/12/06
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR SETTING THE VALVE LASH ON CERTAIN 3406C INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR SETTING THE VALVE LASH ON CERTAIN 3406C INDUSTRIAL ENGINES
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
Specifications
Breather Cap
3406B INDUSTRIAL & MARINE ENGINES
Valve Covers
3406B INDUSTRIAL & MARINE ENGINES
Valve Rocker Arms, Lifters And Bridges
3406B INDUSTRIAL & MARINE ENGINES
Breather Cap
3406C INDUSTRIAL & MARINE ENGINES
Valve Covers
3406C INDUSTRIAL & MARINE ENGINES
Valve Rocker Arms, Lifters And Bridges
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Disassembly and Assembly
Valve Covers
3406B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies And Push Rods
3406B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3406B INDUSTRIAL & MARINE ENGINES
Valve Lifters
3406B INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406B INDUSTRIAL & MARINE ENGINES
Valve Covers
3406C INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies &amp; Push Rods
3406C INDUSTRIAL & MARINE ENGINES
Valve Lifters
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406C INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406C INDUSTRIAL & MARINE ENGINES
Valve Guides
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Improved Valve Mechanism Cover Groups{1107}
1987/12/14
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
A Improved Guide Spring is Now Used {1108}
2005/08/29
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08

Caterpillar Parts SIS Catalog 3406B :

COVER GP-VALVE MECHANISM
371-1668 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
117-3278 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
4W-6116 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
381-1829 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
371-8046 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
287-3561 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7W-7353 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9N-3618 COVER GP-VALVE MECHANISM
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.