AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-2436 CYLINDER HEAD GP S/N 6TB10191-10542 3406B ENGINE - MACHINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

ENGINE - MACHINE 3406B ENGINE - MACHINE 6TB
 3406C Industrial Engine 6TB09857-UP SEBP2737 3406B 6TB   (2018)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
455-1813 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
 

#SEBP27370180
 

4W-2436: CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 6TB10191-10542
i00109100 SEBP2737
4W2436 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 7W-5435 [6] ADAPTER-NOZZLE  
4. 5H-7153 [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 4W-1055 [24] SEAL  
9. 9X-8904 [20] BOLT  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)  
    (USE WITHOUT AIR COMPRESSOR)
15. 4S-6137 [12] STUD-TAPERLOCK (3/8-16X3.1-IN)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370181
 

4W-2436: CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 6TB10543-UP
i00109101 SEBP2737
4W2436 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 100-6920 C [6] ADAPTER-NOZZLE  
4. 7L-4774 C [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 3E-6772 [24] SEAL (WATER)  
9. 124-1855 C [20] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 C [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)  
    (USE WITHOUT AIR COMPRESSOR)
15. 4S-6137 [1] STUD-TAPERLOCK (3/8-16X3.1-IN)  
16. 106-1792 [11] STUD-TAPERLOCK (3/8-16X4-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370182
 

7W-2202: CYLINDER HEAD GP

7W-2202 CYLINDER HEAD GP
S/N 6TB9857-13779
PART OF 1W-1439 CYLINDER HEAD GP
Type 1
i00147308 SEBP2737
7W2202 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0007 CY [1] CYLINDER HEAD AS  
2. 2N-5775 [12] DOWEL  
3. 4N-2803 [24] GUIDE-VALVE  
4. 2W-2622 [12] VALVE-INLET  
5. 2A-4429 [48] LOCK-RETAINER  
6. 6N-7154 [24] ROTOCOIL AS  
7. 4N-5906 [24] SPRING-VALVE  
8. 1W-3860 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370183
 

7W-2202: CYLINDER HEAD GP

7W-2202 CYLINDER HEAD GP
S/N 6TB9857-13779
PART OF 1W-1439 CYLINDER HEAD GP
Type 2
i00193072 SEBP2737
7W2202 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3775 CY [1] CYLINDER HEAD AS  
2. 2N-5775 [12] DOWEL  
3. 4N-2803 [24] GUIDE-VALVE  
4. 108-5902 [12] VALVE-INLET  
5. 2A-4429 [48] LOCK-RETAINER  
6. 6N-7154 [24] ROTOCOIL AS  
7. 4N-5906 [24] SPRING-VALVE  
8. 106-1111 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370184
 

7W-2202: CYLINDER HEAD GP

7W-2202 CYLINDER HEAD GP
S/N 6TB13780-UP
PART OF 1W-1439 CYLINDER HEAD GP
i00166154 SEBP2737
7W2202 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5099 CY [1] CYLINDER HEAD GP  
2. 2N-5775 [12] DOWEL  
3. 122-7374 C [24] GUIDE-VALVE  
4. 115-2368 C [12] VALVE-INLET  
5. 2A-4429 [48] LOCK-RETAINER  
6. 6N-7154 [24] ROTOCOIL AS  
7. 4N-5906 [24] SPRING-VALVE  
8. 115-2367 C [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370185
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
S/N 6TB9857-UP
PART OF 4W-2436 CYLINDER HEAD GP
Type 1
i00109127 SEBP2737
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0007 CY [1] CYLINDER HEAD AS  
2. 2W-2622 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE  
7. 1W-3860 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE  
9. 4W-2472 [24] SPRING-VALVE  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370186
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
S/N 6TB9857-UP
PART OF 4W-2436 CYLINDER HEAD GP
Type 2
i00109128 SEBP2737
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3775 CY [1] CYLINDER HEAD AS  
2. 108-5902 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE  
7. 106-1111 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE  
9. 4W-2472 [24] SPRING-VALVE  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370187
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
S/N 6TB9857-UP
PART OF 4W-2436 CYLINDER HEAD GP
Type 3
i00122401 SEBP2737
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5099 CY [1] CYLINDER HEAD GP  
2. 115-2368 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE (OUTER)  
7. 115-2367 [12] VALVE-EXHAUST  
8. 122-7374 [24] GUIDE-VALVE (STANDARD)  
  121-9859 AB GUIDE-VALVE (0.13-MM OS)  
  121-9860 AB GUIDE-VALVE (0.51-MM OS)  
9. 4W-2472 [24] SPRING-VALVE (INNER)  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27370188
 

116-7952: DAMPER & PULLEY GP

116-7952 DAMPER & PULLEY GP
S/N 6TB9857-UP
FOR USE WITH 1, 2 OR 3 GROOVE FAN DRIVE PULLEY
AN ATTACHMENT
i00489350 SEBP2737
1167952 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 [1] DAMPER AS  
2. 177-9024 [1] ADAPTER-DAMPER  
3. 7C-4521 [1] PULLEY-CRANKSHAFT  
4. 8S-4753 [3] BOLT (5/8-18X8-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27370189
 

4P-5532: DAMPER & PULLEY GP

4P-5532 DAMPER & PULLEY GP
S/N WJA1-UP; 6TB11669-UP
VISCOUS, 1 GROOVE PULLEY
i00384181 SEBP2737
4P5532 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1047 [1] PULLEY (1-GROOVE)  
2. 167-8126 [1] DAMPER AS  
3. 177-9024 [1] ADAPTER-DAMPER  
4. 6F-7024 [6] BOLT (5/8-18X5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
New Head Gasket Available; Head Gasket Replacement Guidelines
1989/02/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
New Valve Lifter Improves Oil Flow To Top Of Engine
1990/04/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Stronger Cylinder Head Bolts Used{1100}
1996/05/09
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Reman Cylinder Head Kits Are Now Available {1100}
2001/02/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Reman Cylinder Heads Are Now Used on Certain 3406 Mechanical Engines {1100, 1101}
2012/04/05
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR SETTING THE VALVE LASH ON CERTAIN 3406C INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR SETTING THE VALVE LASH ON CERTAIN 3406C INDUSTRIAL ENGINES
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Specifications
Valves
3406B INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Disassembly and Assembly
Cylinder Head Assembly
3406B INDUSTRIAL & MARINE ENGINES
Valves
3406B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406B INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406C INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406C INDUSTRIAL & MARINE ENGINES
Valve Guides
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05
New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Caterpillar Parts SIS Catalog 3406B :

CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
455-1813 CYLINDER HEAD GP
CYLINDER HEAD GP
373-7398 CYLINDER HEAD GP
CYLINDER HEAD GP
350-4424 CYLINDER HEAD GP
CYLINDER HEAD GP
350-4422 CYLINDER HEAD GP
CYLINDER HEAD GP
350-4421 CYLINDER HEAD GP
CYLINDER HEAD GP
214-1667 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-1439 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
DAMPER & PULLEY GP
116-7952 DAMPER & PULLEY GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.