BASIC ENGINE
PISTON & ROD GPAIR COMPRESSOR GP
CYLINDER BLOCK GP
POWER TAKE-OFF GP
BASIC ENGINE
PISTON & ROD GP#SEBP27370330
7N-3516: PISTON & ROD GP
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2P-2817 J | [1] | RING-PISTON (INTERMEDIATE) | |
2. | 7E-5665 J | [2] | RETAINER-PIN | |
3. | 7E-5996 | [1] | ROD AS-CONNECTING | |
3A. | 7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | |
3B. | 4P-8495 J | [1] | BUSHING | |
3C. | 219-4458 | [2] | PIN-DOWEL | |
4. | 7N-7078 J | [1] | RING-PISTON (OIL CONTROL) | |
5. | 524-5564 | [1] | PIN-PISTON | |
6. | 328-5573 B | [1] | BEARING-CONNECTING ROD (STANDARD) | |
7. | 346-3340 CJ | [1] | RING-PISTON (TOP) | |
8. | 378-0509 J | [1] | BODY AS-PISTON | |
AVAILABLE REPAIR KIT(S): | ||||
442-4705 ABJ | [1] | KIT-ENGINE CYLINDER REPAIR | ||
(INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT) | ||||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP27370331
316-6379: PLUG GP-AIR COMPRESSOR
316-6379 PLUG GP-AIR COMPRESSOR
S/N 6TB9857-UP
FOR USE WITH @@@@@147-7369@@@@@, @@@@@ 1N-2991@@@@@
AN ATTACHMENT
S/N 6TB9857-UP
FOR USE WITH @@@@@147-7369@@@@@, @@@@@ 1N-2991@@@@@
AN ATTACHMENT
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) |
#SEBP27370332
373-0488: PLUG GP-CYLINDER BLOCK
373-0488 PLUG GP-CYLINDER BLOCK
FOR USE WITH MID-MOUNT LINES GP-TURBOCHARGER, JACKET WATER HEATER AND CONTACTOR PANEL
ALSO AN ATTACHMENT
FOR USE WITH MID-MOUNT LINES GP-TURBOCHARGER, JACKET WATER HEATER AND CONTACTOR PANEL
ALSO AN ATTACHMENT
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SIS#SEBP27370333
373-0489: PLUG GP-CYLINDER BLOCK
373-0489 PLUG GP-CYLINDER BLOCK
S/N WJA1-UP; 6TB27400-UP
FOR USE WITH REAR MOUNT LINES GP-TURBOCHARGER, JACKET WATER HEATER AND CONTACTOR PANEL
ALSO AN ATTACHMENT
S/N WJA1-UP; 6TB27400-UP
FOR USE WITH REAR MOUNT LINES GP-TURBOCHARGER, JACKET WATER HEATER AND CONTACTOR PANEL
ALSO AN ATTACHMENT
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SIS#SEBP27370334
375-4737: PLUG GP-CYLINDER BLOCK
375-4737 PLUG GP-CYLINDER BLOCK
S/N 6TB9857-UP
CANNOT BE USED WITH LINES GP-AIR COMPRESSOR
AN ATTACHMENT
S/N 6TB9857-UP
CANNOT BE USED WITH LINES GP-AIR COMPRESSOR
AN ATTACHMENT
#SEBP27370335
381-0919: PLUG GP-CYLINDER BLOCK
381-0919 PLUG GP-CYLINDER BLOCK
FOR USE WITH MTG GP - CONTACTOR
ALSO AN ATTACHMENT
FOR USE WITH MTG GP - CONTACTOR
ALSO AN ATTACHMENT
#SEBP27370336
2W-4909: POWER TAKE-OFF GP
2W-4909 POWER TAKE-OFF GP
S/N 6TB9857-UP
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
S/N 6TB9857-UP
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SIS#SEBP27370337
2W-4913: POWER TAKE-OFF GP
2W-4913 POWER TAKE-OFF GP
S/N 6TB9857-UP
CLUTCH, INTERMEDIATE DUTY INCLUDES REAR SUPPORT FOR INLINE OR SIDE LOADS, REQUIRES SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
S/N 6TB9857-UP
CLUTCH, INTERMEDIATE DUTY INCLUDES REAR SUPPORT FOR INLINE OR SIDE LOADS, REQUIRES SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5C-6565 | [16] | BOLT (1/2-13X1.125-IN) | |
2. | 7B-1115 | [6] | BOLT (5/8-11X1.625-IN) | |
3. | 2W-4912 Y | [1] | CLUTCH GP | |
4. | 2F-7771 | [1] | KEY-SQUARE | |
5. | 5P-3499 | [1] | BALL BEARING | |
6. | 7L-7856 | [1] | SUPPORT AS-CLUTCH | |
5N-1693 BF | [6] | SHIM (0.5-MM THK) | ||
5N-1694 BF | [10] | SHIM (0.8-MM THK) | ||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
Y | SEPARATE ILLUSTRATION |
#SEBP27370338
4P-3074: POWER TAKE-OFF GP
4P-3074 POWER TAKE-OFF GP
S/N 6TB9857-UP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
ALSO AN ATTACHMENT
S/N 6TB9857-UP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
ALSO AN ATTACHMENT
#SEBP27370339
521-2314: POWER TAKE-OFF GP
521-2314 POWER TAKE-OFF GP
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3406B ENGINE - MACHINE:
CATERPILLAR SISInformation:
BASIC ENGINE
PISTON & ROD GP
Engine News
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Specifications
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
1981/07/13
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
1982/08/09
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
1983/09/12
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
1978/04/17
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
1992/08/31