AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

583R Track-Type Pipelayer 2XS00001-UP (MACHINE) POWERED BY 3406C Engine UNDERCARRIAGE Caterpillar SIS



PIPELAYER 583R PIPELAYER 2XS
 583R Track-Type Pipelayer 2XS00001-UP (MACHINE) POWERED BY 3406C Engine SEBP2739 583R 2XS   (1998)

Parts group 583R:

  For full view, you need register
UNDERCARRIAGE
IDLER GP
BLOCK-TRACK IDLER
357-6310 BLOCK-TRACK IDLER
357-6310 BLOCK-TRACK IDLER
S/N 2XS1-UP
REAR-RH INNER, LH OUTER
FIELD INSTALLATION
BLOCK-TRACK IDLER
357-6311 BLOCK-TRACK IDLER
357-6311 BLOCK-TRACK IDLER
S/N 2XS1-UP
REAR-RH OUTER, LH INNER
FIELD INSTALLATION
CAP GP-TRACK IDLER
9W-9205 CAP GP-TRACK IDLER
9W-9205 CAP GP-TRACK IDLER
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
CAP GP-TRACK IDLER
9W-9206 CAP GP-TRACK IDLER
9W-9206 CAP GP-TRACK IDLER
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
IDLER GP-TRACK
107-9357 IDLER GP-TRACK
107-9357 IDLER GP-TRACK -REAR
S/N 2XS1-UP
COLD WEATHER, SILICONE RUBBER TORICS
PART OF 237-3796 COLD WEATHER AR
AN ATTACHMENT
IDLER GP-TRACK
111-1729 IDLER GP-TRACK
111-1729 IDLER GP-TRACK
S/N 2XS440-UP
PART OF 135-1070 UNDERCARRIAGE AR
Type 1
111-1729 IDLER GP-TRACK
111-1729 IDLER GP-TRACK
S/N 2XS440-UP
PART OF 135-1070 UNDERCARRIAGE AR
Type 2
IDLER GP-TRACK
244-0878 IDLER GP-TRACK
244-0878 IDLER GP-TRACK -COLD WEATHER
S/N 2XS1-UP
NITRILE RUBBER TORICS
PART OF 237-3796, 248-8647 COLD WEATHER AR
AN ATTACHMENT
IDLER GP-TRACK
425-0479 IDLER GP-TRACK
425-0479 IDLER GP-TRACK
S/N 2XS440-UP
PART OF 111-1729 IDLER GP-TRACK
IDLER GP-TRACK
523-8676 IDLER GP-TRACK
523-8676 IDLER GP-TRACK
S/N 2XS440-UP
PART OF 111-1729 IDLER GP-TRACK
IDLER GP-TRACK
6Y-0554 IDLER GP-TRACK
6Y-0554 IDLER GP-TRACK -REAR
S/N 2XS1-439
PART OF 135-1070 UNDERCARRIAGE AR
LINK GP-TRACK
LINK AS-TRACK
136-6713 LINK AS-TRACK
136-6713 LINK AS-TRACK
S/N 2XS1-UP
SEALED, LUBRICATED, POSITIVE PIN RETENTION
PART OF 135-1019, 136-6715, 153-9311, 237-4862 TRACK GP
ALSO AN ATTACHMENT
ROLLER GP
CAP GP-TRACK ROLLER
138-0382 CAP GP-TRACK ROLLER
138-0382 CAP GP-TRACK ROLLER
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
CAP GP-TRACK ROLLER
6T-1142 CAP GP-TRACK ROLLER
6T-1142 CAP GP-TRACK ROLLER -CARRIER ROLLER
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
ROLLER GP-TRACK
163-4618 ROLLER GP-TRACK
163-4618 ROLLER GP-TRACK -DOUBLE FLANGE
S/N 2XS1-UP
ARTIC
AN ATTACHMENT
ROLLER GP-TRACK-DOUBLE FLANGE
153-3900 ROLLER GP-TRACK-DOUBLE FLANGE
153-3900 ROLLER GP-TRACK-DOUBLE FLANGE
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
ROLLER GP-TRACK-DOUBLE FLANGE
198-6703 ROLLER GP-TRACK-DOUBLE FLANGE
198-6703 ROLLER GP-TRACK-DOUBLE FLANGE
S/N 2XS440-UP
PART OF 135-1070 UNDERCARRIAGE AR
FIELD REPLACEMENT ORDER @@@@@523-2224@@@@@
ROLLER GP-TRACK-DOUBLE FLANGE
198-6859 ROLLER GP-TRACK-DOUBLE FLANGE
198-6859 ROLLER GP-TRACK-DOUBLE FLANGE -COLD WEATHER
S/N 2XS1-UP
PART OF 237-3796, 248-8647 COLD WEATHER AR
FIELD REPLACEMENT ORDER @@@@@523-2224@@@@@
AN ATTACHMENT
ROLLER GP-TRACK-DOUBLE FLANGE
523-2224 ROLLER GP-TRACK-DOUBLE FLANGE
523-2224 ROLLER GP-TRACK-DOUBLE FLANGE
S/N 2XS1-UP
COLD WEATHER
FIELD REPLACEMENT FOR @@@@@198-6859@@@@@, @@@@@198-6703@@@@@
ROLLER GP-TRACK-SINGLE FLANGE
132-7928 ROLLER GP-TRACK-SINGLE FLANGE
132-7928 ROLLER GP-TRACK-SINGLE FLANGE
S/N 2XS440-UP
PART OF 135-1070 UNDERCARRIAGE AR
ROLLER GP-TRACK-SINGLE FLANGE
196-9947 ROLLER GP-TRACK-SINGLE FLANGE
196-9947 ROLLER GP-TRACK-SINGLE FLANGE
S/N 2XS440-UP
PART OF 135-1070 UNDERCARRIAGE AR
ROLLER GP-TRACK-SINGLE FLANGE
197-7637 ROLLER GP-TRACK-SINGLE FLANGE
197-7637 ROLLER GP-TRACK-SINGLE FLANGE -COLD WEATHER
S/N 2XS1-UP
SILICONE RUBBER TORICS
PART OF 237-3796 COLD WEATHER AR
AN ATTACHMENT
ROLLER GP-TRACK-SINGLE FLANGE
244-0880 ROLLER GP-TRACK-SINGLE FLANGE
244-0880 ROLLER GP-TRACK-SINGLE FLANGE -COLD WEATHER
S/N 2XS1-UP
NITRILE RUBBER TORICS
PART OF 237-3796, 248-8647 COLD WEATHER AR
AN ATTACHMENT
ROLLER GP-TRACK-SINGLE FLANGE
278-9539 ROLLER GP-TRACK-SINGLE FLANGE
278-9539 ROLLER GP-TRACK-SINGLE FLANGE -COLD WEATHER
S/N 2XS1-UP
PART OF 237-3796, 248-8647 COLD WEATHER AR
AN ATTACHMENT
ROLLER GP-TRACK-SINGLE FLANGE
9W-8705 ROLLER GP-TRACK-SINGLE FLANGE
9W-8705 ROLLER GP-TRACK-SINGLE FLANGE
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
TRACK ADJUSTER & RECOIL GP
TRACK ADJUSTER & RECOIL GP
135-1060 TRACK ADJUSTER & RECOIL GP
135-1060 TRACK ADJUSTER & RECOIL GP
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
TRACK GP
LINK AS-TRACK
136-6713 LINK AS-TRACK
136-6713 LINK AS-TRACK
S/N 2XS1-UP
SEALED, LUBRICATED, POSITIVE PIN RETENTION
PART OF 135-1019, 136-6715, 153-9311, 237-4862 TRACK GP
ALSO AN ATTACHMENT
135-1019 TRACK GP
135-1019 TRACK GP -2-REQUIRED
S/N 2XS1-UP
710-MM (28-IN) GROUSER SHOE. SEALED, LUBRICATED, POSITIVE PIN RETENTION, MODERATE SERVICE, CLIPPED
PART OF 135-1070 UNDERCARRIAGE AR
136-6715 TRACK GP
136-6715 TRACK GP -2-REQUIRED
S/N 2XS1-UP
760-MM (30-IN) GROUSER SHOE. SEALED, LUBRICATED, POSITIVE PIN RETENTION, MODERATE SERVICE, CLIPPED
AN ATTACHMENT
153-9311 TRACK GP
153-9311 TRACK GP -2-REQUIRED
S/N 2XS1-UP
710-MM (28-IN) GROUSER SHOE. SEALED, LUBRICATED, POSITIVE PIN RETENTION, MODERATE SERVICE, CLIPPED, ARCTIC
FOR USE WITH ARTIC AR-ROLLER/IDLER
AN ATTACHMENT
237-4862 TRACK GP
237-4862 TRACK GP -2-REQUIRED
S/N 2XS1-UP
760-MM (30-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, POSITIVE PIN RETENTION, CLIPPED, COLD WEATHER
AN ATTACHMENT
UNDERCARRIAGE GP
135-1070 UNDERCARRIAGE AR
135-1070 UNDERCARRIAGE AR
S/N 2XS1-UP
PART OF 133-1161 GENERAL AR
FRAME GP-TRACK ROLLER
FRAME GP-TELESCOPING RECOIL
135-1050 FRAME GP-TELESCOPING RECOIL
135-1050 FRAME GP-TELESCOPING RECOIL
S/N 2XS1-UP
PART OF 135-1070 UNDERCARRIAGE AR
GUARD GP
GUARD GP-TRACK ROLLER
135-1069 GUARD GP-TRACK ROLLER
135-1069 GUARD GP-TRACK ROLLER
S/N 2XS1-UP
AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Track Adjuster - Remove
583R Pipelayer Power Train
Track Adjuster - Install
583R Pipelayer Power Train
Track Adjuster - Disassemble
583R Pipelayer Power Train
Track Adjuster - Assemble
583R Pipelayer Power Train
Specifications
Case and Frame (Hardbar)
583R Pipelayer Power Train
Systems Operation
Hard Bar
583R Pipelayer Power Train
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Technical Information Bulletin
107-3946 Idler Retainer Has Been Improved {4159}
107-3946 Idler Retainer Has Been Improved {4159}
Specifications
Idlers (Track)
583R Pipelayer Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Systems Operation
Track Idler
583R Pipelayer Power Train
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Disassembly and Assembly Procedures for Idlers with Conventional Duo-Cone Seals {4159, 4180}
Disassembly and Assembly Procedures for Idlers with Conventional Duo-Cone Seals {4159, 4180}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Idler - Remove
583R Pipelayer Power Train
Idler - Install
583R Pipelayer Power Train
Idler - Disassemble
583R Pipelayer Power Train
Idler - Assemble
583R Pipelayer Power Train
Service Magazine
Improved Idlers (D7R-D11R) and Improved Rollers (D9R, D11R) With Symmetrical Duo-Cone Seals Now Available {4159,4180}
1999/05/10
Verifying the Correct Track Idler Block Locations {4150}
2002/07/22
Installer Tool Groups Install Stoppers for Track Rollers and Track Idlers {0729}
2004/04/19
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Improved Mounting Caps for the Rollers and Idlers are now Used {4159, 4180}
2007/10/08
Taller Idler Mounting Blocks for the Rear Idlers on Certain Pipelayers to Improve Up-slope Control {4159}
2010/05/17
Fabricated Idlers are Now Available for Certain D8 Sized Track-Type Tractors and Pipelayers {4159}
Fabricated Idlers are Now Available for Certain D8 Sized Track-Type Tractors and Pipelayers {4159}
Undercarriage Reconditioning Bulletin
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}
Field Service for Positive Pin Retention Track {4169, 4170, 4175}
Field Service for Positive Pin Retention Track {4169, 4170, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Service Magazine
An Improved Thrust Ring Is Now Used in the Track Link Assemblies on the D8T Track-Type Tractors {4169, 4171}
2011/07/20
Track Pins Now Have Smaller Diameter Oil Cavity and Rubber Stopper On Certain D8 Pipelayers and Track-Type Tractors {4169, 4171}
Track Pins Now Have Smaller Diameter Oil Cavity and Rubber Stopper On Certain D8 Pipelayers and Track-Type Tractors {4169, 4171}
Systems Operation
Pivot Shaft
583R Pipelayer Power Train
Service Magazine
New Sealant is Used For the Pivot Shaft Seal {4153}
2005/07/18
Technical Information Bulletin
Roller Retainer Bolt Loosening
Roller Retainer Bolt Loosening
Specifications
Track Rollers
583R Pipelayer Power Train
Track Carrier Rollers
583R Pipelayer Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Systems Operation
Track Roller
583R Pipelayer Power Train
Track Carrier Roller
583R Pipelayer Power Train
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Disassembly and Assembly Procedures for Track Rollers with Conventional Duo-Cone Seals {4180, 7561}
Disassembly and Assembly Procedures for Track Rollers with Conventional Duo-Cone Seals {4180, 7561}
Information Release Memo
NEW D10R, D9R, D8R, &amp; 583R PIPELAYER TRACK ROLLER GROUPS WITH IMPROVED RETAINER BOLT RETENTION
NEW D10R, D9R, D8R, & 583R PIPELAYER TRACK ROLLER GROUPS WITH IMPROVED RETAINER BOLT RETENTION
Disassembly and Assembly
Track Roller - Disassemble
583R Pipelayer Power Train
Track Roller - Assemble
583R Pipelayer Power Train
Track Roller - Remove
583R Pipelayer Power Train
Track Roller - Install
583R Pipelayer Power Train
Service Magazine
Improved Idlers (D7R-D11R) and Improved Rollers (D9R, D11R) With Symmetrical Duo-Cone Seals Now Available {4159,4180}
1999/05/10
The Track Rollers With Symmetrical Duo-Cone Seals Have Been Improved {4180, 7561}
2001/04/16
Installer Tool Groups Install Stoppers for Track Rollers and Track Idlers {0729}
2004/04/19
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Improved Mounting Caps for the Rollers and Idlers are now Used {4159, 4180}
2007/10/08
New Arctic Double Flange Track Roller Is Now Available for Certain Pipelayers {4180}
New Arctic Double Flange Track Roller Is Now Available for Certain Pipelayers {4180}
Undercarriage Reconditioning Bulletin
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Service Magazine
The Track Rollers With Symmetrical Duo-Cone Seals Have Been Improved {4180, 7561}
2001/04/16
Improved Track Seals for the Links Are Now Used {7555}
2005/09/19
Disassembly and Assembly
Recoil Spring - Remove
583R Pipelayer Power Train
Recoil Spring - Install
583R Pipelayer Power Train
Service Magazine
A new FT2649 Undercarriage Pilot Assembly Tool For Recoil Springs is Now Available {0729, 4158}
2000/03/13
Information Release Memo
D11R-D8R NEW TRACK GUIDES USED ON BOGIE SUSPENSION UNDERCARRIAGE
D11R-D8R NEW TRACK GUIDES USED ON BOGIE SUSPENSION UNDERCARRIAGE
Service Magazine
New Guides Are Now Used on Bogie Suspension Gps {4150}
2002/07/01
Operation and Maintenance Manual
Recoil Spring Compartment Oil Level - Check
583R Pipelayer
Track Adjustment - Adjust
583R Pipelayer
Track Adjustment - Check
583R Pipelayer
Specifications
Recoil Group
583R Pipelayer Power Train
Operation and Maintenance Manual
Track Adjustment - Adjust
583R Pipelayer
Track Adjustment - Check
583R Pipelayer
Track Pins - Inspect
583R Pipelayer
Tracks
583R Pipelayer
Specifications
Tracks
583R Pipelayer Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Systems Operation
Tracks
583R Pipelayer Power Train
Undercarriage Reconditioning Bulletin
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}
Shop Repair Procedure for Positive Pin Retention Track {4169, 4170, 4171, 4174, 4175}
Field Service for Positive Pin Retention Track {4169, 4170, 4175}
Field Service for Positive Pin Retention Track {4169, 4170, 4175}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Disassembly and Assembly
Track - Separate
583R Pipelayer Power Train
Track - Connect
583R Pipelayer Power Train
Track - Disassemble
583R Pipelayer Power Train
Track - Assemble
583R Pipelayer Power Train
Service Magazine
Improved Track Press Tools are Available for Positive Pin Retention Track {4150}
2002/07/01
Installer Tool Groups Install Stoppers for Track Rollers and Track Idlers {0729}
2004/04/19
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
New Track Seals and Synthetic Oil Are Now Used in SALT Link Assemblies and Track Groups {4169, 4171}
2004/10/25
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
An Improved Thrust Ring Is Now Used in the Track Link Assemblies on the D8T Track-Type Tractors {4169, 4171}
2011/07/20
Track Pins Now Have Smaller Diameter Oil Cavity and Rubber Stopper On Certain D8 Pipelayers and Track-Type Tractors {4169, 4171}
Track Pins Now Have Smaller Diameter Oil Cavity and Rubber Stopper On Certain D8 Pipelayers and Track-Type Tractors {4169, 4171}
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}
Special Instruction
Reconditioning of Bearing Surfaces and Pivot Shaft Ends {4153}
Reconditioning of Bearing Surfaces and Pivot Shaft Ends {4153}
Undercarriage Reconditioning Bulletin
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Service Magazine
Improved Track Press Tools are Available for Positive Pin Retention Track {4150}
2002/07/01
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
A new FT2649 Undercarriage Pilot Assembly Tool For Recoil Springs is Now Available {0729, 4158}
2000/03/13
Installer Tool Groups Install Stoppers for Track Rollers and Track Idlers {0729}
2004/04/19
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Operation and Maintenance Manual
Track Roller Frame - Inspect
583R Pipelayer
Track Roller Frame Guides - Inspect
583R Pipelayer
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Disassembly and Assembly
Front Track Roller Frame - Remove
583R Pipelayer Power Train
Front Track Roller Frame - Install
583R Pipelayer Power Train
Track Roller Frame - Remove
583R Pipelayer Power Train
Track Roller Frame - Install
583R Pipelayer Power Train
Service Magazine
Recoil Seal Guard Prevents Leaks {4151}
2007/06/25
New Sealant is Used For the Pivot Shaft Seal {4153}
2005/07/18
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

Caterpillar 583R
 
Caterpillar 583R
- pipelayers
TOROMONT CAT
CATERPILLAR 583R 1998
 
CATERPILLAR 583R 1998
- PIPELAYERS
HOLT CAT
CATERPILLAR 583R 1999
 
CATERPILLAR 583R 1999
- PIPELAYERS
HOLT CAT
1998 CAT 583R
Call 
1998 CAT 583R

SMITMA B.V.
Venlo, The Netherlands
1998 CAT 583R
Call 
1998 CAT 583R

SMITMA B.V.
Venlo, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.