114-5102 CHASSIS AR S/N 2TW1-UP PART OF 114-5100 COMMON AR 988G WHEEL LOADER

Part No	Qty	Parts name
114-5136 Y	[1]	AFTERCOOLER GP-AIR
114-5196 Y	[1]	CONTROL GP-BUCKET
114-5129 Y	[1]	BUMPER GP-REAR
114-5172 Y	[1]	CONDENSER GP-REFRIGERANT
160-5760 Y	[1]	FAN GP-SUCTION
114-5126 Y	[1]	FIREWALL GP
198-4270 Y	[1]	FRAME AS-LOADER
208-2379 Y	[1]	FRAME AS-REAR
198-9229 Y	[1]	GUARD GP-FRONT
Y	[1]	GUARD GP-HYDRAULIC TANK
114-5137 Y	[1]	GUARD GP-POWER TRAIN
114-5123 Y	[1]	GUARD GP-RADIATOR
170-7118 Y	[1]	BRACKET GP-MOUNTING
114-5118 Y	[1]	HITCH GP-ARTICULATING
114-5122 Y	[1]	HOOD & GUARD GP
114-5133 Y	[1]	LADDER GP
114-5142 Y	[1]	LINES GP-AIR CONDITIONER
114-5131 Y	[1]	LINES GP-FUEL
198-2625 Y	[1]	LINES GP-GREASE
Y	[1]	LINES GP-GREASE (TILT LINK PINS)
114-5171 Y	[1]	LINES GP-WATER (RADIATOR)
114-5121 Y	[1]	LINK GP-STEERING FRAME LOCK
115-1527 Y	[1]	MIRROR GP-REAR VIEW
114-5145 Y	[1]	OPERATOR AR
163-1034 Y	[1]	PANEL GP-SIDE (HOOD, RH)
154-7531 Y	[1]	PIN & SEAL GP-LINKAGE
139-9127 Y	[1]	PLATE & FILM GP
114-5124 Y	[1]	PLATFORM GP-OPERATOR
114-5176 Y	[1]	STARTING AID GP-ETHER
114-5138 Y	[1]	SUPPORT GP-TRANSMISSION
114-5130 Y	[1]	TANK GP-FUEL
4C-8195 Y	[1]	TOOL GP-CONTROL SERVICE
114-5127 Y	[1]	WASHER GP-WINDOW
Y		SEPARATE ILLUSTRATION

#SEBP27420002

114-5100: COMMON AR

COMMON AR

114-5100 COMMON AR
S/N 2TW1-UP

i01043573 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
114-5102 Y	[1]	CHASSIS AR
Y	[1]	ELECTRICAL AR
Y	[1]	HYDRAULIC AR
114-5106 Y	[1]	INSTALLATION AR-ENGINE
Y	[1]	POWER TRAIN AR
Y		SEPARATE ILLUSTRATION

#SEBP27420003

2Q-8448: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8448 CONVERSION AR-MACHINE
S/N 2TW1-UP
3.6-M BOOM. CUSTOM
CANNOT BE USED WITH 2Q-8388 LIFT AR, 2Q-8389 LIFT AR

i01528052 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
186-4853	[1]	BLOCK AS-STOP
186-4852	[2]	BLOCK
189-7560 Y	[1]	BUMPER GP-REAR
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7571 Y	[1]	COUNTERWEIGHT GP
Y	[1]	GUARD GP-HYDRAULIC TANK
189-7862 Y	[1]	GUARD GP-OIL LEVEL GAUGE (TRANSMISSION)(SIGHT GAUGE)
189-7634 Y	[1]	LINES GP-BRAKE
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
Y	[1]	LINES GP-TILT CYLINDER
189-7693	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[1]	NUT (M12X1.75-THD)
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
187-8133 Y	[1]	TRANSMISSION AR
		S/N CGS557-UP
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
137-1769 Y	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
L	[1]	GUARD GP-HYDRAULIC TANK
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 V	[1]	STOP GP-STEERING
192-2914 T	[1]	TRANSMISSION AR
200-0866 S	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 U	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
201-1049 W	[1]	ARM & BEARING AS-LIFT (4.25-M)
201-0377 W	[1]	LINES GP-FRONT
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP
201-0218 W	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)


		AVAILABLE REPAIR KIT(S):
117-7799 J	[1]	KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD CONTROL GP-BRAKE
T		PART OF STANDARD POWER TRAIN AR
U		PART OF STANDARD ELECTRICAL AR
V		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
W		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
Y		SEPARATE ILLUSTRATION

#SEBP27420004

2Q-8449: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8449 CONVERSION AR-MACHINE
S/N 2TW1-UP
3.6-M BOOM. CUSTOM
CANNOT BE USED WITH 2Q-8388 LIFT AR, 2Q-8389 LIFT AR

i01529047 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7560 Y	[1]	BUMPER GP-REAR
189-7520 Y	[1]	COUNTERWEIGHT GP
Y	[1]	GUARD GP-HYDRAULIC TANK
189-7862 Y	[1]	GUARD GP-OIL LEVEL GAUGE (TRANSMISSION)
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
189-7634 Y	[1]	LINES GP-BRAKE
Y	[1]	LINES GP-TILT CYLINDER
137-1769 Y	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)
189-7694	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[2]	NUT (M12X1.75-THD)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
L	[1]	GUARD GP-HYDRAULIC TANK
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 U	[1]	STOP GP-STEERING
200-0866 S	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 T	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
201-1049 V	[1]	ARM & BEARING AS-LIFT (4.25-M)
201-0377 V	[1]	LINES GP-FRONT


		AVAILABLE REPAIR KIT(S):
117-7799 J	[1]	KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
S		PART OF STANDARD CONTROL GP-BRAKE
T		PART OF STANDARD ELECTRICAL AR
U		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
V		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
Y		SEPARATE ILLUSTRATION

#SEBP27420005

2Q-8450: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8450 CONVERSION AR-MACHINE -3-VALVE
S/N 2TW1-UP
3.6-M BOOM. CUSTOM

i01529726 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
186-4852	[1]	BLOCK
189-7560 Y	[1]	BUMPER GP-REAR
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7520 Y	[1]	COUNTERWEIGHT GP
201-5550	[1]	FILM (988G BLOCK HANDLER,LH)
201-7805	[1]	FILM (988G BLOCK HANDLER,RH)
189-7634 Y	[1]	LINES GP-BRAKE
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
Y	[1]	LINES GP-TILT CYLINDER
189-7695	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[2]	NUT (M12X1.75-THD)
187-8133 Y	[1]	TRANSMISSION AR
		S/N CGS557-UP
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
171-6692 U	[1]	FILM-STRIPE (988G, LH)
171-6693 U	[1]	FILM-STRIPE (988G, RH)
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 W	[1]	STOP GP-STEERING
192-2914 S	[1]	TRANSMISSION AR
200-0866 T	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 V	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
201-1049 X	[1]	ARM & BEARING AS-LIFT (4.25-M)
201-0377 X	[1]	LINES GP-FRONT
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP


		AVAILABLE REPAIR KIT(S):
117-7799 J	[1]	KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD POWER TRAIN AR
T		PART OF STANDARD CONTROL GP-BRAKE
U		PART OF STANDARD FILM GP
V		PART OF STANDARD ELECTRICAL AR
W		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
X		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
Y		SEPARATE ILLUSTRATION

#SEBP27420006

2Q-8451: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8451 CONVERSION AR-MACHINE -2-VALVE
S/N 2TW1-UP
3.6-M BOOM. CUSTOM
FOR USE WITH 145-4225 TORQUE CONVERTER AR-LOCKUP, 183-3850 ENGINE AR, 201-0837 HYDRAULIC AR-2 VALVE
CANNOT BE USED WITH 2Q-8448 CONVERSION AR-LOGGING, 2Q-8449 CONVERSION AR-LOGGING, 2Q-8450 CONVERSION AR-BLOCK HANDLING, 201-0808 HYDRAULIC AR-3 VALVE

i01529876 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
186-4852	[1]	BLOCK
189-7560 Y	[1]	BUMPER GP-REAR
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7520 Y	[1]	COUNTERWEIGHT GP
201-5550	[1]	FILM (988G BLOCK HANDLER,LH)
201-7805	[1]	FILM (988G BLOCK HANDLER,RH)
189-7634 Y	[1]	LINES GP-BRAKE
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
Y	[1]	LINES GP-TILT CYLINDER
189-7695	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[2]	NUT (M12X1.75-THD)
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
187-8133 Y	[1]	TRANSMISSION AR
		S/N CGS557-UP
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
171-6692 S	[1]	FILM-STRIPE (988G, LH)
171-6693 S	[1]	FILM-STRIPE (988G, RH)
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 V	[1]	STOP GP-STEERING
192-2914 T	[1]	TRANSMISSION AR
200-0866 N	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 U	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
231-8177 W	[1]	ARM & BEARING AS-LIFT
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP


		AVAILABLE REPAIR KIT(S):
J		KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD FILM GP
T		PART OF STANDARD POWER TRAIN AR
U		PART OF STANDARD ELECTRICAL AR
V		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
W		PART OF ATTACHMENT HYDRAULIC AR-2 VALVE
Y		SEPARATE ILLUSTRATION

#SEBP27420007

183-3850: ENGINE AR

ENGINE AR

183-3850 ENGINE AR
S/N 2TW1-UP
CANNOT BE USED WITH @@@@@133-3840@@@@@

i01329746 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
180-4188 Y	[1]	ENGINE AR-COMPLETE (WITH ENGINE BRAKE)
176-8350 Y	[1]	SWITCH GP-ENGINE BRAKE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27420008

133-3840: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

133-3840 ENGINE AR-COMPLETE
S/N 7RC1-1117

i01048511 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
126-7631 Y	[1]	CONNECTION GP-ELECTRICAL
136-3117 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
107-6736 Y	[1]	COVER GP-CYLINDER BLOCK (TURBOCHARGER DRAIN COVER)
140-9746 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
165-0698 Y	[1]	COVER GP-SOUND SUPPRESSION
152-9082 Y	[1]	COVER GP-VALVE MECHANISM
4P-5893 Y	[1]	DAMPER GP
145-5012 Y	[1]	DRIVE GP-ACCESSORY
167-9672 Y	[1]	ENGINE AR-CORE
108-9382 Y	[1]	FASTENER GP-FRONT HOUSING
109-1657 Y	[1]	FASTENER GP-VALVE MECHANISM
109-2373 Y	[1]	FASTENER GP-WATER PUMP
167-7696 Y	[1]	FILLER GP-ENGINE OIL
191-0966 Y	[1]	FILTER GP-ENGINE OIL
191-4465 Y	[1]	FILTER GP-FUEL
4P-6817 Y	[1]	FLYWHEEL GP
171-6489 Y	[1]	FUMES DISPOSAL GP
180-5568 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
134-2809 Y	[1]	HOUSING GP-FLYWHEEL
165-0094 Y	[1]	HOUSING GP-FRONT
111-2088 Y	[1]	LIFTING GP-ENGINE (REAR)
111-2355 Y	[1]	LIFTING GP-ENGINE (FRONT)
114-1904 Y	[1]	LINES GP-AIR (AIR-TO-AIR AFTERCOOLER)
191-6147 Y	[1]	LINES GP-AIR
175-3862 Y	[1]	LINES GP-ENGINE OIL
180-3555 Y	[1]	LINES GP-FUEL
138-2770 Y	[1]	LINES GP-TURBOCHARGER OIL
150-4787 Y	[1]	COOLING AR (INCLUDES XMSN & ENG OIL CLRS)
135-6552 Y	[1]	MANIFOLD GP-EXHAUST
175-4859 Y	[1]	MOUNTING GP-ALTERNATOR
149-5239 Y	[1]	MOUNTING GP-MUFFLER
175-3860 Y	[1]	PAN GP-OIL
145-6851 Y	[1]	PLUG GP-CYLINDER BLOCK
150-4279 Y	[1]	PUMP & MTG GP-FUEL TRANSFER (REAR)
100-9347 Y	[1]	PUMP GP-WATER
191-1041 Y	[1]	SHIELD GP-HEAT
185-6278 Y	[1]	SUPPORT GP-ENGINE (FRONT)
153-6463 Y	[1]	WIRING GP-ENGINE

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27420009

180-4188: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

180-4188 ENGINE AR-COMPLETE
S/N 7RC1-1104
388 BRAKE KW (520 BHP) AT 1900 RPM
PART OF 183-3850 ENGINE AR

i01329771 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
126-7631 Y	[1]	CONNECTION GP-ELECTRICAL
136-3117 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
107-6736 Y	[1]	COVER GP-CYLINDER BLOCK (TURBOCHARGER DRAIN COVER)
140-9746 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
165-0698 Y	[1]	COVER GP-SOUND SUPPRESSION
152-9082 Y	[1]	COVER GP-VALVE MECHANISM
4P-5893 Y	[1]	DAMPER GP
145-5012 Y	[1]	DRIVE GP-ACCESSORY
167-9672 Y	[1]	ENGINE AR-CORE
148-7486 Y	[1]	ENGINE BRAKE GP
108-9382 Y	[1]	FASTENER GP-FRONT HOUSING
109-1657 Y	[1]	FASTENER GP-VALVE MECHANISM
109-2373 Y	[1]	FASTENER GP-WATER PUMP
167-7696 Y	[1]	FILLER GP-ENGINE OIL
191-0966 Y	[1]	FILTER GP-ENGINE OIL
191-4465 Y	[1]	FILTER GP-FUEL
4P-6817 Y	[1]	FLYWHEEL GP
171-6489 Y	[1]	FUMES DISPOSAL GP
180-5568 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
134-2809 Y	[1]	HOUSING GP-FLYWHEEL
165-0094 Y	[1]	HOUSING GP-FRONT
111-2088 Y	[1]	LIFTING GP-ENGINE (REAR)
111-2355 Y	[1]	LIFTING GP-ENGINE (FRONT)
114-1904 Y	[1]	LINES GP-AIR (AIR-TO-AIR AFTERCOOLER)
191-6147 Y	[1]	LINES GP-AIR
175-3862 Y	[1]	LINES GP-ENGINE OIL
180-3555 Y	[1]	LINES GP-FUEL
138-2770 Y	[1]	LINES GP-TURBOCHARGER OIL
150-4787 Y	[1]	COOLING AR (INCLUDES XMSN & ENG OIL CLRS)
135-6552 Y	[1]	MANIFOLD GP-EXHAUST
175-4859 Y	[1]	MOUNTING GP-ALTERNATOR
149-5239 Y	[1]	MOUNTING GP-MUFFLER
175-3860 Y	[1]	PAN GP-OIL
145-6851 Y	[1]	PLUG GP-CYLINDER BLOCK
150-4279 Y	[1]	PUMP & MTG GP-FUEL TRANSFER (REAR)
100-9347 Y	[1]	PUMP GP-WATER
191-1041 Y	[1]	SHIELD GP-HEAT
185-6278 Y	[1]	SUPPORT GP-ENGINE (FRONT)
153-6463 Y	[1]	WIRING GP-ENGINE

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
Y		SEPARATE ILLUSTRATION

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

988G/H Uncommanded Implement Lift at Start-Up in Cold Ambient Conditions 10° C (50° F) or Below{5000, 6000, 7000}
988G/H Uncommanded Implement Lift at Start-Up in Cold Ambient Conditions 10° C (50° F) or Below{5000, 6000, 7000}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Letter-APD

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}

Service Magazine

New Flywheel Housing Gasket For 3406 Machine Engines{1157}
1999/03/01

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

A New Retrofit Cab is Now Available for 988G Wheel Loaders {7000, 7301}
2012/01/20

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 988G :

114-5100 COMMON AR

2Q-8448 CONVERSION AR-MACHINE

2Q-8449 CONVERSION AR-MACHINE

2Q-8450 CONVERSION AR-MACHINE

2Q-8451 CONVERSION AR-MACHINE

183-3850 ENGINE AR

133-3840 ENGINE AR-COMPLETE

180-4188 ENGINE AR-COMPLETE

Truck sale:

Caterpillar 988G
- Wheel Loaders
FINANZAUTO S.A.

69,000

Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
FABICK CAT

Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.

Caterpillar 988G/H, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.

72,000

Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC