238-1807 ENGINE AR-COMPLETE S/N 7RC1500-UP 388 BRAKE KW (520 BHP) AT 1900 RPM 988G WHEEL LOADER

Part No	Qty	Parts name
126-7631 Y	[1]	CONNECTION GP-ELECTRICAL
136-3117 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
107-6736 Y	[1]	COVER GP-CYLINDER BLOCK (TURBOCHARGER DRAIN COVER)
140-9746 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
165-0698 Y	[1]	COVER GP-SOUND SUPPRESSION
152-9082 Y	[1]	COVER GP-VALVE MECHANISM
4P-5893 Y	[1]	DAMPER GP
145-5012 Y	[1]	DRIVE GP-ACCESSORY
238-1820 Y	[1]	ENGINE AR-CORE
108-9382 Y	[1]	FASTENER GP-FRONT HOUSING
109-1657 Y	[1]	FASTENER GP-VALVE MECHANISM
109-2373 Y	[1]	FASTENER GP-WATER PUMP
167-7696 Y	[1]	FILLER GP-ENGINE OIL
191-0966 Y	[1]	FILTER GP-ENGINE OIL
191-4465 Y	[1]	FILTER GP-FUEL
4P-6817 Y	[1]	FLYWHEEL GP
171-6489 Y	[1]	FUMES DISPOSAL GP
180-5568 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
		S/N 7RC1500-1513
199-6348 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
		S/N 7RC1514-UP
134-2809 Y	[1]	HOUSING GP-FLYWHEEL
165-0094 Y	[1]	HOUSING GP-FRONT
111-2088 Y	[1]	LIFTING GP-ENGINE (REAR)
111-2355 Y	[1]	LIFTING GP-ENGINE (FRONT)
114-1904 Y	[1]	LINES GP-AIR (AIR-TO-AIR AFTERCOOLER)
191-6147 Y	[1]	LINES GP-AIR
175-3862 Y	[1]	LINES GP-ENGINE OIL
180-3555 Y	[1]	LINES GP-FUEL
138-2770 Y	[1]	LINES GP-TURBOCHARGER OIL
150-4787 Y	[1]	COOLING AR (INCLUDES XMSN & ENG OIL CLRS)
135-6552 Y	[1]	MANIFOLD GP-EXHAUST
175-4859 Y	[1]	MOUNTING GP-ALTERNATOR
149-5239 Y	[1]	MOUNTING GP-MUFFLER
175-3860 Y	[1]	PAN GP-OIL
234-5996 Y	[1]	PLUG GP-CYLINDER HEAD
235-3174 Y	[1]	PLUG GP-CYLINDER HEAD
150-4279 Y	[1]	PUMP & MTG GP-FUEL TRANSFER (REAR)
100-9347 Y	[1]	PUMP GP-WATER
185-6278 Y	[1]	SUPPORT GP-ENGINE (FRONT)
153-6463 Y	[1]	WIRING GP-ENGINE

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27420011

238-1808: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

238-1808 ENGINE AR-COMPLETE
S/N 7RC1502-UP
388 BRAKE KW (520 BHP) AT 1900 RPM

i02303516 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
126-7631 Y	[1]	CONNECTION GP-ELECTRICAL
136-3117 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
107-6736 Y	[1]	COVER GP-CYLINDER BLOCK (TURBOCHARGER DRAIN COVER)
140-9746 Y	[1]	COVER GP-CYLINDER BLOCK (CENTRAL STRUCTURE)
165-0698 Y	[1]	COVER GP-SOUND SUPPRESSION
152-9082 Y	[1]	COVER GP-VALVE MECHANISM
4P-5893 Y	[1]	DAMPER GP
145-5012 Y	[1]	DRIVE GP-ACCESSORY
238-1820 Y	[1]	ENGINE AR-CORE
148-7486 Y	[1]	ENGINE BRAKE GP
108-9382 Y	[1]	FASTENER GP-FRONT HOUSING
109-1657 Y	[1]	FASTENER GP-VALVE MECHANISM
109-2373 Y	[1]	FASTENER GP-WATER PUMP
167-7696 Y	[1]	FILLER GP-ENGINE OIL
191-0966 Y	[1]	FILTER GP-ENGINE OIL
191-4465 Y	[1]	FILTER GP-FUEL
4P-6817 Y	[1]	FLYWHEEL GP
171-6489 Y	[1]	FUMES DISPOSAL GP
180-5568 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
		S/N 7RC1502-1513
199-6348 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
		S/N 7RC1514-UP
134-2809 Y	[1]	HOUSING GP-FLYWHEEL
165-0094 Y	[1]	HOUSING GP-FRONT
111-2088 Y	[1]	LIFTING GP-ENGINE (REAR)
111-2355 Y	[1]	LIFTING GP-ENGINE (FRONT)
114-1904 Y	[1]	LINES GP-AIR (AIR-TO-AIR AFTERCOOLER)
191-6147 Y	[1]	LINES GP-AIR
175-3862 Y	[1]	LINES GP-ENGINE OIL
180-3555 Y	[1]	LINES GP-FUEL
138-2770 Y	[1]	LINES GP-TURBOCHARGER OIL
150-4787 Y	[1]	COOLING AR (INCLUDES XMSN & ENG OIL CLRS)
135-6552 Y	[1]	MANIFOLD GP-EXHAUST
175-4859 Y	[1]	MOUNTING GP-ALTERNATOR
149-5239 Y	[1]	MOUNTING GP-MUFFLER
175-3860 Y	[1]	PAN GP-OIL
234-5996 Y	[1]	PLUG GP-CYLINDER HEAD
235-3174 Y	[1]	PLUG GP-CYLINDER HEAD
150-4279 Y	[1]	PUMP & MTG GP-FUEL TRANSFER (REAR)
100-9347 Y	[1]	PUMP GP-WATER
185-6278 Y	[1]	SUPPORT GP-ENGINE (FRONT)
153-6463 Y	[1]	WIRING GP-ENGINE

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27420012

167-9672: ENGINE AR-CORE

ENGINE AR-CORE

167-9672 ENGINE AR-CORE
S/N 7RC1-1117
388 BRAKE KW (520 BHP) AT 1900 RPM
PART OF 133-3840, 180-4188 ENGINE AR-COMPLETE

i01556917 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
122-1248 Y	[1]	BASE GP-VALVE COVER & INJ HARN
185-9699 Y	[1]	CAMSHAFT GP
137-7298 Y	[1]	CRANKSHAFT GP
137-8471 Y	[1]	CYLINDER BLOCK GP
183-4792 Y	[1]	CYLINDER HEAD GP
6I-3638 Y	[1]	DRIVE GP-PUMP (HYDRAULIC FAN)
167-9619	[1]	ELECTRONICS GP-ENGINE RATINGS
164-7793 Y	[1]	FASTENER GP-FRONT HOUSING
4N-2481 Y	[1]	FASTENER GP-OIL PUMP MOUNTING (ENGINE)
137-5921 Y	[1]	GEAR GP-FRONT
153-2875 Y	[6]	INJECTOR GP-FUEL
134-3071 Y	[6]	PISTON & ROD GP
161-4113 Y	[1]	PUMP GP-ENGINE OIL
192-1995 Y	[1]	TURBOCHARGER GP
148-7482 Y	[1]	MECHANISM GP-FUEL PUMP & VALVE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27420013

238-1820: ENGINE AR-CORE

ENGINE AR-CORE

238-1820 ENGINE AR-CORE
S/N 7RC1500-1517
PART OF 238-1807, 238-1808 ENGINE AR-COMPLETE

i02071333 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
122-1248 Y	[1]	BASE GP-VALVE COVER & INJ HARN
185-9699 Y	[1]	CAMSHAFT GP
137-7298 Y	[1]	CRANKSHAFT GP
137-8471 Y	[1]	CYLINDER BLOCK GP
234-5985 Y	[1]	CYLINDER HEAD GP
6I-3638 Y	[1]	DRIVE GP-PUMP
167-9619	[1]	ELECTRONICS GP-ENGINE RATINGS
164-7793 Y	[1]	FASTENER GP-FRONT HOUSING
4N-2481 Y	[1]	FASTENER GP-OIL PUMP MOUNTING (ENGINE)
137-5921 Y	[1]	GEAR GP-FRONT
153-2875 Y	[6]	INJECTOR GP-FUEL
134-3071 Y	[6]	PISTON & ROD GP
161-4113 Y	[1]	PUMP GP-ENGINE OIL
192-1995 Y	[1]	TURBOCHARGER GP
148-7482 Y	[1]	MECHANISM GP-FUEL PUMP & VALVE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27420014

114-5106: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

114-5106 INSTALLATION AR-ENGINE
S/N 2TW1-UP
PART OF 114-5100 COMMON AR

i00938840 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
132-6248 Y	[1]	AIR CLEANER GP
190-6564 Y	[1]	ALTERNATOR GP-CHARGING
190-6563 Y	[1]	BELT TENSIONER GP
172-1248 Y	[1]	COMPRESSOR GP-REFRIGERANT
164-5789 Y	[1]	DRAIN GP-ENGINE OIL
132-6237 Y	[1]	DUST EJECTOR GP
132-6249 Y	[1]	FUMES DISPOSAL GP
132-6250 Y	[1]	LINES GP-AIR
132-6235 Y	[1]	MUFFLER GP
170-1757 Y	[1]	PULLEY GP-CRANKSHAFT
191-1041 Y	[1]	SHIELD GP-HEAT
105-4729 Y	[1]	STARTING MOTOR GP-ELECTRIC
132-6236 Y	[1]	SUPPORT GP-ENGINE
Y		SEPARATE ILLUSTRATION

#SEBP27420015

133-9907: ADAPTER GP-PUMP DRIVE

ADAPTER GP-PUMP DRIVE

133-9907 ADAPTER GP-PUMP DRIVE
S/N 7RC1-UP
PART OF 6I-3638 DRIVE GP-PUMP

i00506272 SEBP2742

1339907 ADAPTER GP-PUMP DRIVE Parts scheme

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-3867	[2]	BALL BEARING
2.	4F-7957	[3]	BOLT (1/4-20X0.875-IN)
3.	6I-4575	[1]	GEAR (34-TEETH)
4.	9X-2038	[3]	WASHER (7X19X2-MM THK)
5.	133-9906	[1]	ADAPTER
6.	1H-8647	[1]	RING-SNAP

#SEBP27420016

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N 7RC1-1536
PART OF 167-9672, 238-1820 ENGINE AR-CORE

i00517612 SEBP2742

1221248 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-3127	[6]	BOLT (1/4-20X0.75-IN)
2.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
3.	5P-0537	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
4.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
5.	122-1486	[1]	HARNESS AS-WIRING (ELECTRONIC UNIT INJECTOR)
	8L-8413	[6]	STRAP-CABLE (WHITE)
	103-8134	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	100-5218	[3]	CLIP
7.	100-5219	[3]	CLIP
8.	177-4152	[1]	BASE-VALVE MECHANISM COVER
9.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
10.	5P-5678 D		SEAL (2.9-M)
11.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
12.	6V-0128	[1]	SEAL-CONNECTOR
13.	123-3202	[2]	STRAP-CABLE
	D		ORDER BY THE METER

#SEBP27420017

190-6563: BELT TENSIONER GP

BELT TENSIONER GP

190-6563 BELT TENSIONER GP
S/N 2TW1-UP
PART OF 114-5106 INSTALLATION AR-ENGINE
FOR USE WITH A 62 MILLIMETER DIAMETER PULLEY

i01398910 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	190-6560	[1]	BELT-SERPENTINE
2.	217-8938	[1]	BELT TENSIONER
3.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
	M		METRIC PART

#SEBP27420018

185-9699: CAMSHAFT GP

CAMSHAFT GP

185-9699 CAMSHAFT GP
S/N 7RC1-UP
PART OF 167-9672, 238-1820 ENGINE AR-CORE

i01297651 SEBP2742

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-9089	[1]	COVER
2.	119-0036	[3]	SCREW-FLAT HEAD (5/16-18X0.875-IN)
3.	332-7308	[1]	CAMSHAFT
4.	6V-1197	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP27420019

107-6736: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

107-6736 COVER GP-CYLINDER BLOCK
S/N 7RC1-1117; 7RC1500-UP
PART OF 133-3840, 180-4188, 238-1807, 238-1808 ENGINE AR-COMPLETE
FOR USE WITH MID MOUNTED TURBO AND/OR RH OIL FILL

i00472957 SEBP2742

1076736 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[2]	BOLT (3/8-16X1-IN)
2.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	4W-9890	[1]	COVER
4.	4N-0699	[1]	GASKET

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3406E and 3456 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
3406E and 3456 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

REMAN PRODUCT LINE ADDITION: 3456 SHORT BLOCK
REMAN PRODUCT LINE ADDITION: 3456 SHORT BLOCK

LOW VOLUME NEW ENGINE STRATEGY RATIONALIZATION
LOW VOLUME NEW ENGINE STRATEGY RATIONALIZATION

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Testing and Adjusting

Troubleshooting
3406E and 3456 Engines for Caterpillar Built Machines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}

Troubleshooting

Diagnostic Codes
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader

Disassembly and Assembly

Engine and Torque Converter - Remove
988G Wheel Loader Engine Supplement

Engine and Torque Converter - Install
988G Wheel Loader Engine Supplement

Engine from Torque Converter - Separate
988G Wheel Loader Engine Supplement

Engine to Torque Converter - Connect
988G Wheel Loader Engine Supplement

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 988G :

180-4188 ENGINE AR-COMPLETE

133-3840 ENGINE AR-COMPLETE

183-3850 ENGINE AR

2Q-8451 CONVERSION AR-MACHINE

2Q-8450 CONVERSION AR-MACHINE

2Q-8449 CONVERSION AR-MACHINE

2Q-8448 CONVERSION AR-MACHINE

114-5100 COMMON AR

238-1808 ENGINE AR-COMPLETE

167-9672 ENGINE AR-CORE

238-1820 ENGINE AR-CORE

114-5106 INSTALLATION AR-ENGINE

133-9907 ADAPTER GP-PUMP DRIVE

122-1248 BASE GP-VALVE COVER & INJ HARN

190-6563 BELT TENSIONER GP

185-9699 CAMSHAFT GP

Truck sale:

Caterpillar 988G
- Wheel Loaders
FINANZAUTO S.A.

69,000

Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
FABICK CAT

Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.

Caterpillar 988G/H, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.

72,000

Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC