AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

505-4066 ADAPTER-TIP -CENTER S/N 2TW1-UP 988G WHEEL LOADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP

WHEEL LOADER 988G WHEEL LOADER 2TW
 988G Wheel Loader 2TW00001-UP (MACHINE) POWERED BY 3456 Engine SEBP2742 988G 2TW   (1999)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
ADAPTER-TIP
505-4064 ADAPTER-TIP
ADAPTER-TIP
505-4065 ADAPTER-TIP
ADAPTER-TIP
505-4066 ADAPTER-TIP
164-8386 COVER GP-ADAPTER
EDGE AS-BASE
135-9560 EDGE AS-BASE
EDGE AS-BASE
172-9217 EDGE AS-BASE
 

#SEBP27420820
 

505-4066: ADAPTER-TIP

505-4066 ADAPTER-TIP -CENTER
S/N 2TW1-UP
i06804221 SEBP2742
5054066 ADAPTER-TIP Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP27420821
 

175-1457: BUCKET AS-GENERAL PURPOSE

175-1457 BUCKET AS-GENERAL PURPOSE
S/N 2TW1-UP
7.0 CU M (9.166 CU YD)
PART OF 175-1456 BUCKET GP-GENERAL PURPOSE
i01270884 SEBP2742
1751457 BUCKET AS-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-2794 [1] HINGE AS (OUTER, LH)(LH-OUTER)  
2. 180-3040 [1] HINGE AS (INNER, LH)(LH-INNER)  
3. 180-3039 [1] HINGE AS (RH-INNER)(RH-INNER)  
4. 175-2795 [1] HINGE AS (OUTER, RH)(RH-OUTER)  
5. 6I-8249 [1] CORNER (RH)  
6. 6I-8250 [1] CORNER (LH)  
7. 135-6642 [1] PLATE-WEAR (LH)  
8. 136-6195 [1] PLATE-WEAR (RH)  
9. 136-6205 [1] PLATE-WEAR  
10. 190-9793 [2] PLATE-WEAR  
11. 190-9794 [2] PLATE-WEAR  
12. 167-1278 [1] PLATE-WEAR  
13. 172-4425 [2] PLATE  
14. 172-4426 [1] PLATE  
15. 183-5190 [1] EDGE-CUTTING  
16. 184-7831 [1] PLATE  
17. 184-7832 [1] PLATE  
18. 184-8104 [1] PLATE-WEAR  
19. 184-8099 [2] PLATE  
20. 184-8096 [1] PLATE AS (RH)  
20A. 2C-9259 [1] PLATE-IDENTIFICATION (CAT)  
21. 184-8097 [1] PLATE AS (LH)  
  2C-9259 [1] PLATE-IDENTIFICATION (CAT)  
 

#SEBP27420822
 

148-7388: BUCKET AS-ROCK

148-7388 BUCKET AS-ROCK
S/N 2TW1-UP
6.3 CU M (8.25 CU YD). BOLT ON EDGE SEGMENTS
PART OF 163-9402 BUCKET GP-ROCK
i01047660 SEBP2742
1487388 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-5239 [1] HINGE AS (LH)  
2. 154-5238 [1] HINGE AS (RH)  
3. 136-6175 [1] EDGE AS  
3A. 114-0464 [2] ADAPTER (2-STRAP, CENTER)  
3B. 114-0465 [3] ADAPTER-TIP (2-STRAP, RH)  
3C. 114-0466 [3] ADAPTER-TIP (2-STRAP, LH)  
4. 112-9024 [1] PLATE  
5. 112-9023 [1] PLATE  
6. 6W-9305 [2] PLATE  
7. 154-6367 [2] PLATE-WEAR  
8. 167-1278 [1] PLATE-WEAR  
9. 136-6203 [1] PLATE-WEAR  
10. 136-6204 [2] PLATE-WEAR  
11. 136-6205 [1] PLATE-WEAR  
 

#SEBP27420823
 

156-1033: BUCKET AS-ROCK

156-1033 BUCKET AS-ROCK
S/N 2TW1-UP
6.3 CU M (8.25 CU YD). BOLT ON EDGE SEGMENTS
PART OF 163-9404 BUCKET GP-ROCK
i01047657 SEBP2742
1561033 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-5239 [1] HINGE AS (LH)  
2. 154-5238 [1] HINGE AS (RH)  
3. 156-1040 [1] EDGE AS  
3A. 114-0464 [8] ADAPTER (2-STRAP, CENTER)  
4. 112-9024 [1] PLATE  
5. 112-9023 [1] PLATE  
6. 6W-9305 [2] PLATE  
7. 154-6367 [2] PLATE-WEAR  
8. 167-1278 [1] PLATE-WEAR  
9. 136-6203 [1] PLATE-WEAR  
10. 136-6204 [2] PLATE-WEAR  
11. 136-6205 [1] PLATE-WEAR  
12. [2] BAR  
 

#SEBP27420824
 

156-6381: BUCKET AS-ROCK

156-6381 BUCKET AS-ROCK
S/N 2TW1-UP
6.87 CU M (9.0 CU YD). BOLT ON EDGE SEGMENTS
PART OF 163-9403 BUCKET GP-ROCK
i01047658 SEBP2742
1566381 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-5239 [1] HINGE AS (LH)  
2. 154-5238 [1] HINGE AS (RH)  
3. 156-6391 [1] EDGE AS  
3A. 114-0464 [8] ADAPTER (2-STRAP, CENTER)  
4. 112-9024 [1] PLATE  
5. 112-9023 [1] PLATE  
6. 6W-9305 [2] PLATE  
7. 154-6367 [2] PLATE-WEAR  
8. 167-1278 [1] PLATE-WEAR  
9. 136-6203 [1] PLATE-WEAR  
10. 136-6204 [2] PLATE-WEAR  
11. 136-6205 [1] PLATE-WEAR  
 

#SEBP27420825
 

166-5882: BUCKET AS-ROCK

166-5882 BUCKET AS-ROCK
S/N 2TW1-UP
6.3 CU M (8.25 CU YD)
PART OF 166-5881 BUCKET GP-ROCK
i01091115 SEBP2742
1665882 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-9305 [2] PLATE  
2. 112-9023 [1] PLATE  
3. 112-9024 [1] PLATE  
4. 135-6642 [1] PLATE-WEAR (LH)  
5. 136-6195 [1] PLATE-WEAR (RH)  
6. 136-6203 [1] PLATE-WEAR  
7. 138-0006 [7] RETAINER-G.E.T.  
8. 138-0020 [7] BASE-WEAR PLATE  
9. 138-0023 [7] COVER  
10. 154-5238 [1] HINGE AS  
11. 154-5239 [1] HINGE AS  
12. 167-1278 [1] PLATE-WEAR  
13. 168-0487 [1] PLATE-WEAR  
14. 168-0488 [3] PLATE-WEAR  
15. 168-6477 [1] EDGE AS  
16. 8P-9770 [1] PLATE  
17. 140-6772 [1] ADAPTER-TIP  
18. 140-6773 [3] ADAPTER-TIP  
19. 140-6774 [3] ADAPTER-TIP  
 

#SEBP27420826
 

175-1451: BUCKET AS-ROCK

175-1451 BUCKET AS-ROCK
S/N 2TW1-UP
6.4 CU M(8.33 CU YD)
PART OF 175-1450 BUCKET GP-ROCK
i01204285 SEBP2742
1751451 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 187-2863 [1] PLATE  
2. 187-2864 [1] PLATE  
3. 135-6642 [1] PLATE-WEAR (LH)  
4. 136-6195 [1] PLATE-WEAR (RH)  
5. 136-6203 [1] PLATE-WEAR  
6. 136-6205 [1] PLATE-WEAR  
7. 154-6367 [2] PLATE-WEAR  
8. 136-6204 [2] PLATE-WEAR  
9. 167-1278 [1] PLATE-WEAR  
10. 136-6175 [1] EDGE AS  
11. 172-4424 [6] PLATE  
12. 172-4425 [2] PLATE  
13. 172-4426 [1] PLATE  
14. 172-4717 [1] PLATE  
15. 172-4718 [1] PLATE  
16. 175-2794 [1] HINGE AS (OUTER, LH)(LIFT-LH-OUTER)  
17. 175-2795 [1] HINGE AS (OUTER, RH)(LIFT-RH-OUTER)  
18. 180-3039 [1] HINGE AS (RH-INNER)(LIFT-RH-INNER)  
19. 180-3040 [1] HINGE AS (INNER, LH)(LIFT-LH-INNER)  
 

#SEBP27420827
 

175-1453: BUCKET AS-ROCK

175-1453 BUCKET AS-ROCK
S/N 2TW1-UP
6.9 CU M (9.0 CU YD)
PART OF 175-1452 BUCKET GP-ROCK
i01205038 SEBP2742
1751453 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-2794 [1] HINGE AS (OUTER, LH)  
2. 180-3040 [1] HINGE AS (INNER, LH)  
3. 180-3039 [1] HINGE AS (RH-INNER)  
4. 175-2795 [1] HINGE AS (OUTER, RH)  
5. 187-2863 [1] PLATE  
6. 187-2864 [1] PLATE  
7. 136-6203 [1] PLATE-WEAR  
8. 136-6205 [1] PLATE-WEAR  
9. 154-6367 [2] PLATE-WEAR  
10. 136-6204 [2] PLATE-WEAR  
11. 156-6391 [1] EDGE AS  
  114-0464 [8] ADAPTER (2-STRAP, CENTER)  
12. 167-1278 [1] PLATE-WEAR  
13. 172-4424 [6] PLATE  
14. 172-4425 [2] PLATE  
15. 172-4426 [1] PLATE  
16. 172-4717 [1] PLATE  
17. 172-4718 [1] PLATE  
18. 178-4525 [2] PLATE  
 

#SEBP27420828
 

175-1455: BUCKET AS-ROCK

175-1455 BUCKET AS-ROCK
S/N 2TW1-UP
6.3 CU M (8.2 CU YD)
PART OF 175-1454 BUCKET GP-ROCK
i01379263 SEBP2742
1751455 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-2794 [1] HINGE AS (OUTER, LH)  
2. 180-3040 [1] HINGE AS (INNER, LH)  
3. 180-3039 [1] HINGE AS (RH-INNER)  
4. 175-2795 [1] HINGE AS (OUTER, RH)  
5. 135-6642 [1] PLATE-WEAR (LH)  
6. 136-6195 [1] PLATE-WEAR (RH)  
7. 136-6203 [1] PLATE-WEAR  
8. 136-6204 [2] PLATE-WEAR  
9. 136-6205 [1] PLATE-WEAR  
10. 154-6367 [2] PLATE-WEAR  
11. 156-1040 [1] EDGE AS  
11A. 114-0464 [8] ADAPTER (2-STRAP, CENTER)  
12. 167-1278 [1] PLATE-WEAR  
13. 172-4424 [6] PLATE  
14. 172-4425 [2] PLATE  
15. 172-4426 [1] PLATE  
16. 172-4717 [1] PLATE  
17. 172-4718 [1] PLATE  
18. 187-2863 [1] PLATE  
19. 187-2864 [1] PLATE  
 

#SEBP27420829
 

175-1459: BUCKET AS-ROCK

175-1459 BUCKET AS-ROCK
S/N 2TW1-UP
6.4-CU M (8.34-CU YD)
PART OF 175-1458 BUCKET GP-ROCK
i01215299 SEBP2742
1751459 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Q-7019 [1] EDGE AS  
1A. 107-3554 [1] ADAPTER-TIP (2-STRAP, CENTER)  
1B. 107-3555 [2] ADAPTER-TIP (2-STRAP, RH)  
1C. 107-3556 [2] ADAPTER-TIP (2-STRAP, LH)  
1D. 112-2555 [1] ADAPTER-TIP  
1E. 112-2556 [1] ADAPTER-TIP  
2. 135-6642 [1] PLATE-WEAR (LH)  
3. 136-6195 [1] PLATE-WEAR (RH)  
4. 136-6204 [2] PLATE-WEAR  
5. 136-6205 [1] PLATE-WEAR  
6. 154-6367 [2] PLATE-WEAR  
7. 167-1278 [1] PLATE-WEAR  
8. 172-4424 [6] PLATE  
9. 172-4425 [2] PLATE  
10. 172-4426 [1] PLATE  
11. 172-4717 [1] PLATE  
12. 172-4718 [1] PLATE  
13. 175-2794 [1] HINGE AS (OUTER, LH)  
14. 175-2795 [1] HINGE AS (OUTER, RH)  
15. 178-5098 [2] PLATE  
16. 178-5099 [2] PLATE  
17. 178-5100 [1] PLATE-WEAR  
18. 178-5101 [3] PLATE-WEAR  
19. 178-5102 [2] PLATE  
20. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
21. 178-5097 [2] PLATE  
22. 193-8221 [2] BAR  
23. 180-3039 [1] HINGE AS (RH-INNER)  
24. 180-3040 [1] HINGE AS (INNER, LH)  
25. 187-2863 [1] PLATE  
26. 187-2864 [1] PLATE  
27. 205-8365 [1] PLATE-WEAR  
 

Information:

Operation and Maintenance Manual
Bucket Cutting Edges - Inspect/Replace
988G Wheel Loader
Bucket Wear Plates - Inspect/Replace
988G Wheel Loader
Bucket Tips - Inspect/Replace
988G Wheel Loader
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
The Pins for the Sidebar Bend or Break
The Pins for the Sidebar Bend or Break
Specifications
Ground Engaging Tool Torques
988G Wheel Loader Electrohydraulic System
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
New Wear Plates are Available {6820}
2002/03/18
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Welding Recommendations for the Large Bucket Ground Engaging Tools {0751}
2003/12/15
Correction to Operation and Maintenance Manual , "Bucket Tips - Inspect/Replace" {6805}
2004/04/19
New Triten Bucket Wear Plates Are Available {6120}
2005/01/10
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Replace Bucket Pins and Pin Retainers More Frequently in Limestone Applications {0751}
2006/07/31
K110 Tip and Retention Improvement {6803, 6805}
2008/05/26
Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
2008/08/25
K Series Bucket Tip Slag Retainers For High Temperature Applications are Available {6805}
2009/01/26
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Bevel of 25 &deg; for the Base Edge With the Replacement of Abrasion Adapters {6803}
2010/01/08
A Slag Retainer is available for K170 Bucket Tip Retention Systems {6110, 6803, 6805}
2010/07/14
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/08/02
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 988G :

ADAPTER-TIP
505-4065 ADAPTER-TIP
ADAPTER-TIP
505-4064 ADAPTER-TIP
ADAPTER-TIP
505-4063 ADAPTER-TIP
ADAPTER-TIP
505-4062 ADAPTER-TIP
ADAPTER-TIP
505-4061 ADAPTER-TIP
ADAPTER-TIP
505-4060 ADAPTER-TIP
ADAPTER-TIP
368-3784 ADAPTER-TIP
ADAPTER-TIP
368-3775 ADAPTER-TIP
BUCKET AS-GENERAL PURPOSE
175-1457 BUCKET AS-GENERAL PURPOSE
BUCKET AS-ROCK
148-7388 BUCKET AS-ROCK
BUCKET AS-ROCK
156-1033 BUCKET AS-ROCK
BUCKET AS-ROCK
156-6381 BUCKET AS-ROCK
BUCKET AS-ROCK
166-5882 BUCKET AS-ROCK
BUCKET AS-ROCK
175-1451 BUCKET AS-ROCK
BUCKET AS-ROCK
175-1453 BUCKET AS-ROCK
BUCKET AS-ROCK
175-1455 BUCKET AS-ROCK

Truck sale:

Caterpillar 988G
 
Caterpillar 988G
- Wheel Loaders
FINANZAUTO S.A.
 
69,000 
Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
FABICK CAT
Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
 
Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.
Caterpillar 988G/H, bucket, Construction
 
Caterpillar 988G/H, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.
Caterpillar 988G, Wheel Loaders, Construction
72,000 
Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.