AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Mounting GP 561M PIPELAYER


IMPLEMENTS
MOUNTING GP
WORK TOOLS
WINCH GP

PIPELAYER 561M PIPELAYER 1KW
 INSTALLATION & PARTS MANUAL WINCH MODEL PA55 FOR 561M PS PIP 1KW00001-UP (MACHINE) SEBP2745 561M 1KW   (1997)

IMPLEMENTS

MOUNTING GP
MOUNTING GP
MOUNTING GP
 

#SEBP27450001
 

MOUNTING GP

Mounting GP
c957407 SEBP2745
None MOUNTING GP Parts scheme None MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0408 [4] CAPSCREW, HEX HEAD (1 - 8 X 3 1/2 G8)  
2. 7X-0450 [4] NUT (1 1/8 - 7)  
3. 133-9225 [4] STUD (1 1/8 - 7 X 5 3/4 G8)  
4. 123-4428 [1] ADAPTER - RH  
5. 123-4429 [1] ADAPTER - LH  
6. 118-6553 [4] SPACER  
7. 118-6537 [1] PILOT, PTO  
8. 123-4407 [4] CAPSCREW, HEX HEAD (1/2 - 13 X 1 G5)  
9. 8S-5654 [3] O-RING  
10. 119-1551 [4] WASHER (1 1/8 HARDENED)  
11. 118-6539 [1] COUPLING  
12. 7X-2562 [4] CAPSCREW, HEX HEAD (HM20 - 2.5 x 45 mm G8)  
13. 6V-3531 [10] CAPSCREW, HEX HEAD (HM20 - 2.5 x 50 mm, G8)  
14. 120-7671 [2] RETAINING RING  
15. 118-6559 [1] PTO SHAFT  
 

#SEBP27450002
 

CONTROL GP

Control GP
c957412 SEBP2745
None CONTROL GP Parts scheme None CONTROL GP Parts scheme None CONTROL GP Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-4432 [1] CONTROL, POWERSHIFT, DUAL-AXIS  
2. 147-2724 [1] CONTROL BRACKET  
3. 137-4398 [3] CAPSCREW, BUTTON HEAD (M6-1.0 x 25 mm)  
4. 5C-2890 [3] NUT, HEX (M6-1.0)  
5. 8T-4205 [3] WASHER, FLAT-THIN (1/4)  
6. 137-4402 [3] CAPSCREW, BUTTON HEAD (M10-1.5 x 25 mm)  
7. 8T-4895 [3] WASHER, FLAT-NARROW (3/8)  
8. 123-4439 [1] DECAL, POWERSHIFT CONTROL  
9. 147-2725 [1] CLAMP PLATE  
10. 123-4424 [2] CONTROL CABLE - 90 in. (2286 mm)  
11. 1H-3338 [6] LOCKWASHER, EXTERNAL TOOTH (1/4)  
12. 7R-5874 [1] KNOB  
13. 6V-8185 [6] NUT (1/4-20)  
14. 8T-9367 [6] CAPSCREW, HEX HEAD (1/4-20 X 2 G5)  
15. 126-2821 [2] SLIDING LOCKSCREW  
16. 126-2822 [2] CABLE BUSHING  
17. 126-2823 [1] CABLE SUPPORT HOUSING, OUTER  
18. 126-2824 [1] CABLE SUPPORT HOUSING, INNER  
19. 126-2818 [1] CABLE ANCHOR, OUTER  
20. 126-2820 [1] CABLE ANCHOR, INNER  
21. 8T-4205 [12] WASHER, FLAT-THIN (1/4)  
22. 187-1876 [1] RESTRICTOR PLATE  
23. 126-2805 [1] DETENT CLIP SPRING KIT (INCLUDES 23, 25, 26 & 28)  
24. 126-2804 [1] BOOT  
25. [2] MACHINE SCREW (4-40 X 5/8)  
26. [2] NUT (4-40)  
27. 126-5994 [4] SCREW, SELF TAPPING (10-9 X 3/4)  
28. [2] LOCKWASHER, EXTERNAL TOOTH (4)  
 

#SEBP27450003
 

WINCH CASE & COVERS

Winch Case & Covers
c957414 SEBP2745
None WINCH CASE & COVERS Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-4407 [12] CAPSCREW, HEX HEAD (1/2 - 13 NC X 1 G5)  
2. 7H-4543 [4] DRIVE SCREW  
3. 5P-9436 [1] PLUG, DRAIN (MAY BE SUBSTITUTED FOR ITEM 7)  
4. 123-4441 [1] PLUG, OIL FILL (INCLUDES ITEM 27)  
5. 6L-9965 [1] O-RING  
6. 5F-5434 [1] VENT PLUG  
7. 118-5783 [1] SIGHT GAUGE (INCLUDES ITEM 28)  
8. 118-6973 [1] WINCH CASE - STANDARD PTO - SHOWN  
9. 123-4417 [1] SERIAL NUMBER DATA PLATE  
10. 118-6598 [1] COVER, TOP ACCESS  
11. 118-6316 [1] GASKET  
12. 120-7541 [1] STRAINER COVER  
14. 118-6588 [1] COVER, SIDE ACCESS  
15. 120-7543 [1] GASKET  
16. 118-6298 [1] TIE BOLT  
17. 118-6597 [2] COVER, LOWER ACCESS  
18. 118-6317 [2] GASKET  
19. 118-8382 [1] DRAW BAR PIN  
20. 118-6314 [1] SPACER TUBE  
21. 119-1623 [1] LOCKWASHER, 1 3/4  
22. 7F-0190 [1] NUT, HEX HEAD (1 3/4 NC)  
23. 3B-8822 [2] ELBOW  
24. 6K-7917 N [11] CAPSCREW, HEX HEAD (1/2 - 13 NC X 1 G5 SS)  
25. 3B-5320 [2] COTTER PIN (3/8 X 3 in.)  
26. 119-2165 [1] EXPANSION PLUG - 3 SHAFT WINCH ONLY  
27. 6V-5065 [1] O-RING - FOR OIL FILL PLUG  
28. 3D-2824 [2] O-RING - FOR OIL DRAIN & LEVEL PLUG (ITEMS 3 & 7)  
  N   SS = SELF SEALING MATERIAL PREAPPLIED TO THREADS
 

#SEBP27450004
 

SHAFT GP - CLUTCH

Shaft Gp - Clutch
c957416 SEBP2745
None SHAFT GP - CLUTCH Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-4078 [2] O-RING (PART OF ITEM 14)  
2. 120-7630 [1] BEARING CUP  
3. 119-2138 [2] BALL BEARING - STD PTO  
4. 119-2140 [1] BEARING CUP  
5. 120-7635 [1] BEARING CONE  
6. 119-2206 [4] NEEDLE BEARING - INNER RACE  
7. 119-1606 [2] THRUST BEARING  
8. 119-2208 [4] NEEDLE BEARING  
9. 119-1593 [1] BEARING CONE  
10. 123-4407 [6] CAPSCREW, HEX HEAD (1/2 - 13 NC X 1 G5)  
11. 123-4409 [6] CAPSCREW, HEX HEAD (1/2 - 13 NC X 3 G5)  
12. 118-7225 [1] CLUTCH SHAFT - 4 SHAFT WINCH  
  118-7217 [1] CLUTCH SHAFT - 3 SHAFT WINCH  
13. 120-7633 [4] THRUST BEARING RACE  
14. 5P-1403 [2] PLUG (CONTAINS ITEM 1)  
15. 102-0883 [1] PLUG (1/4 NPT)  
16. 8M-4437 [8] O-RING  
17. 120-7629 [2] O-RING  
18. 119-1590 [2] O-RING  
19. 119-1549 [4] O-RING  
20. 119-1616 [2] RETAINING RING  
21. 2D-6398 [2] RETAINING RING  
22. 119-2171 [2] BEARING RETAINER  
23. 119-1550 [4] BACK-UP RING  
24. 118-6548 [2] ROTARY SEAL SHAFT  
25. 118-5817 [2] THRUST BEARING SPACER  
26. 119-1628 [2] BACK-UP WASHER  
27. 119-2193 [2] ROTARY SEAL  
28. 118-6582 [1] PINION GEAR - 18 TEETH - 4 SHAFT WINCH  
  118-6560 [1] PINION GEAR - 15 TEETH - 3 SHAFT WINCH  
29. 118-6568 [1] BRAKE HUB  
30. 118-5858 [2] BEVEL GEAR SPACER  
31. 118-5844 [2] BEARING CARRIER  
32. 118-5852 [1] PINION SPACER - 4 SHAFT WINCH  
  118-5845 [1] PINION SPACER - 3 SHAFT WINCH  
33. 118-5848 [1] SHIM SET  
34. 118-6647 B SHIM .005 in. (.13 mm)  
  118-6599 B SHIM .007 in. (.18 mm)  
  118-6600 B SHIM .020 in. (.51 mm)  
35. 118-6951 [1] CLUTCH SHAFT BEARING CAR. - 4 SHAFT WINCH  
  118-6969 [1] CLUTCH SHAFT BEARING CAR. - 3 SHAFT WINCH  
36. 118-5864 [1] BRAKE HUB SPACER  
38. 4H-1440 [2] ROLLPIN  
39. 120-7663 [4] SLEEVE  
  B   AS REQUIRED
 

#SEBP27450005
 

GEAR GP - BEVEL

Gear Gp - Bevel
c957417 SEBP2745
None GEAR GP - BEVEL Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2141 [1] BEARING ASSEMBLY  
2. 119-1617 [1] BEARING, LOCK NUT  
3. 123-4407 [6] CAPSCREW HEX HEAD  
4. 119-1618 [1] LOCKWASHER  
5. 118-5804 [1] O-RING  
6. 123-4403 [1] DOWEL PIN  
7. 119-2157 [1] RETAINING RING  
8. 120-7638 [1] OIL SEAL  
9. 118-8381 [1] SEAL SPACER  
10. 118-6589 [1] PUMP DRIVE PINION  
11. 118-5854 [1] SHIM GASKET  
12. 118-7222 [1] CARRIER  
13. 118-5855 [2] SHIM .005 in. (.13 mm)  
14. 118-5856 [2] SHIM .007 in. (.18 mm)  
15. 118-5857 [2] SHIM .020 in. (.51 mm)  
16. 118-6971 [1] BEVEL PINION - 18T STANDARD SPEED - 3 SHAFT PS TRACTORS  
  119-0536 [1] BEVEL PINION - 14T SLOW SPEED - 4 SHAFT PS TRACTORS  
17. 119-2218 [1] BEVEL GEAR SET - 18/38T  
  119-2219 [1] BEVEL GEAR SET - 14/39T  
18. 9X-7545 [1] O-RING  
19. 1L-3768 [1] RETAINING RING  
20. 119-2190 [1] PLUG, BEVEL PINION  
 

#SEBP27450006
 

CLUTCH AS.

Clutch As.
c957418 SEBP2745
None CLUTCH AS. Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  118-7210 CLUTCH ASSEMBLY - INCLUDES ITEMS 1-16  
1. 9S-8007 [2] PLUG, O-RING FLUSH - INCLUDES ITEM 15  
2. 3Y-9267 [1] STEEL BALL  
3. 118-5851 [8] SPRING  
4. 5S-3676 [1] O-RING  
5. 120-7669 [1] O-RING  
6. 119-2195 [1] RETAINING RING  
7. 119-1534 [1] RETAINING RING  
8. 118-6566 [1] SPRING RETAINER  
9. 118-5849 [1] CHECK VALVE SEAT  
10. 118-6323 [1] PRESSURE PLATE  
11. 118-8385 N [1] CLUTCH HOUSING  
12. 118-6547 [5] DISC - FRICTION, BRONZE  
13. 118-6302 [4] DISC - STEEL .093 in. (2.36 mm)  
14. 118-6594 [1] CLUTCH PISTON  
15. 119-2189 [2] O-RING  
16. 5H-3182 [1] PIN  
  N   PART NO. 1188385 INCLUDES HOUSING 1207697 WITH TWO (2) STEEL BALLS 3Y9267 DRIVEN INTO DRILLED PASSAGES.
 

#SEBP27450007
 

BRAKE AS - STANDARD

Brake As - Standard
c957419 SEBP2745
None BRAKE AS - STANDARD Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  120-7698 BRAKE ASSEMBLY, STD - INCLUDES ITEMS 1-20  
1. 120-7630 [1] BEARING CUP  
2. 0S-1594 [2] CAPSCREW, HEX HEAD (3/8 - 16 NC X 1 G5)  
3. 102-0883 [4] PLUG, HEX SOCKET (1/4 NPT)  
4. 119-1577 [3] O-RING  
5. 4S-5898 [1] O-RING  
6. 3Y-9267 [2] STEEL BALL  
7. 119-1586 [2] O-RING  
8. 123-4415 [1] RETAINING RING  
9. 118-6323 [1] PRESSURE PLATE - OUTER  
10. 119-1534 [1] RETAINING RING  
11. 118-6587 [1] PISTON RETAINER  
12. 118-5846 [1] PRESSURE PLATE - INNER  
13. 118-6593 [1] BRAKE PISTON  
14. 118-6949 [1] BRAKE HOUSING (REQUIRES 2 OF ITEM 6)  
15. 118-6547 [8] DISC - FRICTION BRONZE  
16. 118-6302 [7] DISC STEEL - .093 in. (2.36 mm)  
17. 118-0550 [1] INSERT  
18. 118-7223 [1] BRAKE CARRIER  
19. 119-2167 [2] BRAKE SPRING  
 

#SEBP27450008
 

SHAFT GP - IDLER

Shaft Gp - Idler
Without Freespool
c957420 SEBP2745
None SHAFT GP - IDLER Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-0160 [1] BEARING ASSEMBLY - INNER  
2. 119-0162 [1] BEARING ASSEMBLY - OUTER  
3. 119-1547 [1] O-RING  
4. 118-5859 [1] LOCK PLATE  
5. 123-4408 [2] CAPSCREW, HEX HEAD (1/2 - 13 X 3/4 G5)  
6. 123-4407 [2] CAPSCREW, HEX HEAD (1/2 - 13 X 1 G5)  
7. 1A-1460 [2] CAPSCREW, HEX HEAD (1/2 - 13 X 2 G5)  
8. 038-7338 [1] PLUG, SOCKET HEAD  
9. 120-7633 [1] THRUST WASHER  
10. 118-6535 [1] ADJUSTER  
11. 5H-3193 [1] ROLLPIN  
12. 118-6584 [1] PINION, SECOND REDUCTION  
13. 118-6976 [1] GEAR, FIRST REDUCTION  
14. 118-6917 [1] CARRIER, IDLER SHAFT  
15. 064-1609 [2] SCREW, SOCKET HEAD  
16. 118-6586 [1] COLLAR  
17. 123-4414 [1] CAPSCREW HEX HEAD (3/4 - 16 X 1 1/4 G5)  
 

#SEBP27450009
 

DRUM GP - CABLE

Drum Gp - Cable
c957422 SEBP2745
None DRUM GP - CABLE Parts scheme
  For full view, you need register

Parts for your 561M PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2137 [1] BALL BEARING  
2. 119-2203 [2] BEARING CUP  
3. 119-2204 [2] BEARING CONE  
4. 0S-1621 [10] CAPSCREW, HEX HEAD (1/2 - 13 X 1 G5 - SS)  
5. 123-4405 [11] CAPSCREW, HEX HEAD (1/2 - 13 X 1 1/4 G5)  
6. 1S-6119 [2] O-RING  
7. 123-4416 [2] RETAINING RING  
8. 7M-2275 [1] RETAINING RING  
9. 118-5866 [2] OIL SEAL  
10. 119-0561 [1] CAPSCREW, SOCKET HEAD (1/2 - 13 X 1 G8 - SS)  
11. 118-7229 [1] CABLE DRUM  
12. 118-7215 [1] GEAR, 2ND REDUCTION  
13. 118-6583 [1] SHAFT, 2ND REDUCTION  
14. 118-6968 [1] BEARING CARRIER, COVER  
15. 118-6975 [2] BEARING CARRIER, DRUM  
16. 118-5847 [1-2] SHIM SET 1 pair ea., .005 in., .007 in., 020 in. (.13 mm, .18 mm, .51 mm)  
17. 118-6273 [1] FERRULE - 3/4 in. (19 mm) WIRE ROPE  
  118-6275 [1] FERRULE - 7/8 in. (22 mm) WIRE ROPE  
19. 119-0562 [1] CAPSCREW, HEX HEAD (1/2 - 13 X 5 G5 - SS)  
20. 8T-4223 [1] WASHER (1/2)  
 

Information:

Caterpillar Parts SIS Catalog 561M :

CONTROL GP
CONTROL GP
WINCH CASE & COVERS
WINCH CASE & COVERS
SHAFT GP - CLUTCH
SHAFT GP - CLUTCH
GEAR GP - BEVEL
GEAR GP - BEVEL
CLUTCH AS.
CLUTCH AS.
BRAKE AS - STANDARD
BRAKE AS - STANDARD
SHAFT GP - IDLER
SHAFT GP - IDLER
DRUM GP - CABLE
DRUM GP - CABLE

Truck sale:

1999 CAT 561M
USD $95,000 
1999 CAT 561M

Clark Heavy Equipment
Pleasureville, Kentucky
CAT 561M
USD $95,000 
CAT 561M

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.