AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5N-7329 CLUTCH GP S/N 38S16484-UP PART OF 4W-9828 POWER TAKE-OFF GP AN ATTACHMENT 3412 ENGINE - MACHINE


BASIC ENGINE
CLUTCH GP
COUPLING GP
CYLINDER BLOCK GP

ENGINE - MACHINE 3412 ENGINE - MACHINE 38S
 3412C Industrial Engine 38S16484-UP SEBP2746 3412 38S   (2018)

BASIC ENGINE

CLUTCH GP
CLUTCH AS
5N-3789 CLUTCH AS
CLUTCH GP
2W-4912 CLUTCH GP
CLUTCH GP
4P-0410 CLUTCH GP
CLUTCH GP
4P-3068 CLUTCH GP
CLUTCH GP
4W-7140 CLUTCH GP
CLUTCH GP
5N-7329 CLUTCH GP
CLUTCH GP
7C-3045 CLUTCH GP
 

#SEBP27460040
 

5N-7329: CLUTCH GP

5N-7329 CLUTCH GP
S/N 38S16484-UP
PART OF 4W-9828 POWER TAKE-OFF GP
AN ATTACHMENT
i00387176 SEBP2746
5N7329 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-8257 [1] NUT-HUB  
  492-3073 [1] WASHER-LOCK  
2. 1L-9087 [1] KEY  
3. 5N-3789 Y [1] CLUTCH AS  
4. 5N-9315 C [1] RING-DRIVE (72-TEETH)  
5. 7W-5729 C [1] HOUSING-CLUTCH  
6. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
7. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
8. 9S-1354 [1] NUT (5/8-18-THD)  
  4K-0499 [1] LOCKWASHER  
9. 4W-8403 CI [1] HOSE AS  
10. 4W-2652 C [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
11. 5N-7095 [1] PLATE-SEAL  
12. 1P-4693 [1] CUP-BEARING  
  6V-2735 [1] CONE-BEARING  
13. 5N-7094 [1] SPACER (120.65X136X93.69-MM THK)  
14. 2D-9454 [1] CUP-BEARING  
  6V-2734 [1] CONE-BEARING  
15. 0S-1594 C [3] BOLT (3/8-16X1-IN)  
16. 5N-7440 [1] PLATE-SEAL  
17. 5P-5813 [1] LOCKNUT-BEARING (2.75X18-THD)  
  4V-7173 [1] LOCKNUT  
18. 6B-8865 [1] KEY-WOODRUFF  
19. 5N-7441 [1] SHAFT-CLUTCH  
20. 012-7950 [2] PLUG  
21. 4B-4756 [1] SHAFT  
22. 3B-0623 [2] PLUG-CUP  
23. 5N-7471 [1] WASHER (72X100X6-MM THK)  
24. 5N-7153 [1] SPACER (76X88.9X93.63-MM THK)  
25. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
26. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
27. 4B-4725 [1] YOKE  
28. 6L-5151 [28] KEY-WOODRUFF  
29. 2N-1287 C [1] ELBOW-FLARED  
30. 4W-8404 C [1] FITTING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP27460041
 

7C-3045: CLUTCH GP

7C-3045 CLUTCH GP
S/N 38S16484-UP
PART OF 7C-3046 POWER TAKE-OFF GP
AN ATTACHMENT
i00404408 SEBP2746
7C3045 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8460 [1] RING-DRIVE  
2. 7C-8373 [1] SHAFT-STUB  
3. 8L-5159 [1] BALL BEARING  
4. 1A-8063 [1] BOLT (3/4-10X2.5-IN)  
5. 7C-3872 [1] WASHER-RETAINING  
6. 7C-3871 B [1] SHIM-RETAINER (0.13-MM THK)  
  7C-3877 B [1] SHIM-RETAINER (0.18-MM THK)  
  7C-3878 B [1] SHIM-RETAINER (0.51-MM THK)  
7. 7W-7535 [1] HUB  
8. 5N-6136 [3] PLATE-DRIVE  
9. 8L-8462 [2] PLATE AS-CENTER  
10. 8L-8459 [1] PLATE-PRESSURE  
11. 6L-3963 [4] PIN-COTTER  
12. 8L-5107 [4] LEVER  
13. 8L-5188 [4] PIN  
14. 8L-8457 [1] YOKE-ADJUSTMENT  
15. 6L-3962 [8] PIN-COTTER  
16. 8L-5095 [8] LINK-LEVER  
17. 8L-5200 [4] PIN  
18. 8L-5199 [4] PIN  
19. 8L-8458 [1] SLEEVE-SLIDING  
20. 8L-5105 [1] COLLAR AS-SLEEVE  
21. 2K-0564 [2] LOCKNUT (1/2-20-THD)  
22. 8L-5186 B [2] SHIM (0.06-IN THK)(0.06IN THK)  
23. 0V-0375 [2] BOLT (1/2-13X3.25-IN)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
25. 9S-1354 [1] NUT (5/8-18-THD)  
26. 6F-0253 [1] LOCKWASHER  
27. 4M-5317 [1] BUSHING-REDUCER  
28. 8L-5096 [1] HOSE AS  
29. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
30. 2W-7879 [1] HOUSING-CLUTCH  
31. 8L-5094 [1] RING-COLLAR  
32. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
33. 8L-5679 [1] RING-RETAINING  
34. 3N-1462 [1] PIN AS  
35. 3N-1461 [1] SPRING  
36. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
37. 5B-2407 [1] LOCK  
38. 8L-5099 [1] RETAINER-BEARING  
39. 1B-8702 [1] KEY-WOODRUFF  
40. 6V-8234 [1] PIN-SPRING  
41. 5D-7449 [2] CUP-BEARING  
42. 6B-8575 [1] KEY-SQUARE  
43. 7W-7534 [1] SHAFT  
44. 9Y-4298 C [1] PLATE-INSTRUCTION  
45. 4F-7499 [2] CONE-BEARING  
46. 4B-9782 [1] BALL  
47. 2W-7878 [1] CARRIER AS-BEARING  
48. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
49. 2W-4905 [2] RING-SEAL  
50. 2B-0858 [2] PLUG-PIPE  
51. 7H-3171 [1] PLUG-PIPE  
52. 4W-2655 [1] LEVER-HAND CONTROL  
53. 2W-7876 [1] FORK-THROW-OUT  
54. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
55. 8L-5101 [1] SHAFT  
56. 1B-8737 [2] KEY-WOODRUFF  
  2S-3230 CF LUBRICANT-BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP27460042
 

147-3758: COUPLING GP-GENERATOR

147-3758 COUPLING GP-GENERATOR
S/N 5NA6214-UP
FOR USE WITH @@@@@ 5N-5078@@@@@, @@@@@ 5N-5079@@@@@, @@@@@ 5N-5093@@@@@
AN ATTACHMENT
i00659761 SEBP2746
1473758 COUPLING GP-GENERATOR Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 147-3760 [1] PLATE-COUPLING  
2. 7L-5452 B [2] SHIM (0.8-MM THK)  
3. 0S-1585 [16] BOLT (1/2-13X1.5-IN)  
4. 2M-0849 [16] WASHER-HARD (13.5X25.5X5-MM THK)  
5. 9F-9522 [8] BOLT (7/8-9X2.25-IN)  
6. 3P-3419 [8] WASHER (23X36.5X2.67-MM THK)  
7. 1D-4585 [6] BOLT (5/8-11X3.25-IN)  
8. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP27460043
 

127-4676: COVER GP-CYLINDER BLOCK

127-4676 COVER GP-CYLINDER BLOCK
S/N 38S17792-24094
i00517011 SEBP2746
1274676 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0794 [1] COVER  
2. 7C-0307 [1] GASKET  
3. 4N-2629 [4] COVER-ACCESS  
4. 4N-2630 [4] GASKET-SIDE COVER  
5. 0S-1594 [72] BOLT (3/8-16X1-IN)  
6. 5M-2894 [72] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4N-1683 [1] COVER  
8. 4N-1684 [1] GASKET  
9. 4N-1779 [1] COVER  
10. 4N-4307 [1] GASKET  
11. 4N-1682 [1] COVER  
12. 4N-0864 [1] GASKET  
 

#SEBP27460044
 

127-4676: COVER GP-CYLINDER BLOCK

127-4676 COVER GP-CYLINDER BLOCK
S/N 38S24095-UP
i02615665 SEBP2746
1274676 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0794 [1] COVER  
2. 239-5572 C [1] SEAL-INTEGRAL  
3. 4N-2629 [4] COVER-ACCESS  
4. 4N-2630 [4] GASKET-SIDE COVER  
5. 0S-1594 [72] BOLT (3/8-16X1-IN)  
6. 5M-2894 [72] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 4N-1683 [1] COVER  
8. 239-5571 C [1] SEAL-INTEGRAL  
9. 4N-1779 [1] COVER  
10. 4N-4307 [1] GASKET  
11. 4N-1682 [1] COVER  
12. 4N-0864 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27460045
 

4N-1960: COVER GP-CYLINDER BLOCK

4N-1960 COVER GP-CYLINDER BLOCK
S/N 38S16484-19682
i00370028 SEBP2746
4N1960 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2772 [1] COVER  
  4N-0933 B [1] GASKET  
2. 4N-1683 [1] COVER  
  4N-1684 [1] GASKET  
3. 4N-1779 [1] COVER  
  4N-4307 [1] GASKET  
4. 4N-1682 [1] COVER  
  4N-0864 [1] GASKET  
5. 4N-0794 B [1] COVER  
  4N-0790 [1] GASKET  
6. 0S-1594 CB [14] BOLT (3/8-16X1-IN)  
7. 5M-2894 B [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 0L-1351 CB [2] BOLT (3/8-16X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27460046
 

4N-1960: COVER GP-CYLINDER BLOCK

4N-1960 COVER GP-CYLINDER BLOCK
S/N 38S19683-24162
i01108498 SEBP2746
4N1960 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1683 [1] COVER  
2. 4N-1684 [1] GASKET  
3. 0S-1594 B [15] BOLT (3/8-16X1-IN)  
4. 5M-2894 B [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4N-1779 [1] COVER  
6. 4N-4307 [1] GASKET  
7. 4N-1682 [1] COVER  
8. 4N-0864 [1] GASKET  
9. 4N-0794 B [1] COVER  
10. 7C-0307 B [1] GASKET  
11. 2P-2772 BC [1] COVER  
12. 234-8937 BC [1] SEAL-INTEGRAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27460047
 

4N-1960: COVER GP-CYLINDER BLOCK

4N-1960 COVER GP-CYLINDER BLOCK
S/N 38S23261-UP
i02551074 SEBP2746
4N1960 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1683 [1] COVER  
2. 239-5571 C [1] SEAL-INTEGRAL  
3. 0S-1594 B [15] BOLT (3/8-16X1-IN)  
4. 5M-2894 B [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4N-1779 [1] COVER  
6. 4N-4307 [1] GASKET  
7. 4N-1682 [1] COVER  
8. 4N-0864 [1] GASKET  
9. 4N-0794 B [1] COVER  
10. 239-5572 BC [1] SEAL-INTEGRAL  
11. 2P-2772 B [1] COVER  
12. 234-8937 B [1] SEAL-INTEGRAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27460048
 

4N-6866: COVER GP-CYLINDER BLOCK

4N-6866 COVER GP-CYLINDER BLOCK
S/N 38S16484-UP
i00107931 SEBP2746
4N6866 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1683 [1] COVER  
2. 239-5571 [1] SEAL-INTEGRAL  
3. 0S-1594 [12] BOLT (3/8-16X1-IN)  
4. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 2P-2772 [1] COVER  
6. 234-8937 [1] SEAL-INTEGRAL  
7. 4N-0794 [1] COVER  
8. 239-5572 [1] SEAL-INTEGRAL  
9. 4N-1682 [1] COVER  
10. 4N-0864 [1] GASKET  
 

#SEBP27460049
 

9Y-1460: COVER GP-CYLINDER BLOCK

9Y-1460 COVER GP-CYLINDER BLOCK
S/N 38S16484-UP
i00438127 SEBP2746
9Y1460 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1683 [1] COVER  
2. 239-5571 [1] SEAL-INTEGRAL  
3. 0S-1594 [7] BOLT (3/8-16X1-IN)  
4. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4N-1779 [1] COVER  
6. 4N-4307 [1] GASKET  
7. 6N-1782 [1] COVER  
8. 4N-0864 [1] GASKET  
9. 4N-0794 [1] COVER  
10. 239-5572 [1] SEAL-INTEGRAL  
11. 2P-2772 [1] COVER  
12. 234-8937 [1] SEAL-INTEGRAL  
13. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
14. 1A-2029 [5] BOLT (3/8-16X1.125-IN)  
15. 1B-5174 [1] PLUG-PIPE  
 

Information:

Engine News
Use Correct Installation Procedure For Clutch Pilot Bearing In Rear Power Takeoff
1979/08/08
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups
1981/05/20
New Dust Covers Available For Twin Disc IBF318 And IBF321 Rear Power Take-Off Clutches
1983/09/14
Conversion Kit Available For Clutch Used In Morbark Chippers{3055}
1994/05/01
Correct Procedure To Adjust Front Power Takeoff Clutches
1978/09/27
Special Instruction
Procedure For Conversion From Oil Lubrication To Grease Lubrication For Rear Power Takeoff Clutches{3055}
Procedure For Conversion From Oil Lubrication To Grease Lubrication For Rear Power Takeoff Clutches{3055}
Specifications
Power Take-Off Clutch
3408C & 3412C INDUSTRIAL ENGINES
Power Take-Off Clutch Groups
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups{3055}
1981/05/11
Correct Procedure To Adjust Front Power Takeoff Clutches{3055}
1978/09/04
Use Correct Installation Procedure For Clutch Pilot Bearing In Rear Power Takeoff{3055}
1979/08/06
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20

Caterpillar Parts SIS Catalog 3412 :

CLUTCH GP
4W-7140 CLUTCH GP
CLUTCH GP
4P-3068 CLUTCH GP
CLUTCH GP
4P-0410 CLUTCH GP
CLUTCH GP
2W-4912 CLUTCH GP
CLUTCH AS
5N-3789 CLUTCH AS
CAMSHAFT GP
4N-0965 CAMSHAFT GP
BARRING GP
5R-7425 BARRING GP
BARRING GP
253-2468 BARRING GP
CLUTCH GP
7C-3045 CLUTCH GP
COUPLING GP-GENERATOR
147-3758 COUPLING GP-GENERATOR
COVER GP-CYLINDER BLOCK
127-4676 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
127-4676 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4N-1960 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4N-1960 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4N-1960 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.