AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-7007 CYLINDER HEAD GP S/N 38S18722-UP 3412 ENGINE - MACHINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-AUXILIARY

ENGINE - MACHINE 3412 ENGINE - MACHINE 38S
 3412C Industrial Engine 38S16484-UP SEBP2746 3412 38S   (2018)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD GP
269-3676 CYLINDER HEAD GP
CYLINDER HEAD GP
269-3676 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
PLUG GP-CYLINDER HEAD
273-8668 PLUG GP-CYLINDER HEAD
 

#SEBP27460100
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 38S18722-UP
i00566856 SEBP2746
4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 [1] BRACKET-FUEL PUMP  
2. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING (LH)  
8. 225-3099 [2] GASKET-CYLINDER HEAD  
9. 7W-8301 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
11. 141-3228 YC [2] CYLINDER HEAD GP  
12. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
13. 0L-1352 B [5] BOLT (3/8-16X3.25-IN)  
14. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
15. 4N-0932 [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 4N-7253 [12] GASKET-CHAMBER  
18. 359-1439 [48] SEAL AS-WATER  
19. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 [5] PLUG-PIPE (1/2-14-THD)  
22. 8T-6762 B [1] PLUG-PIPE (1/2-14-THD)  
23. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6734 [1] SUPPORT-HOUSING (RH)  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 7L-4774 [12] SEAL-O-RING  
32. 100-6920 [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27460101
 

7W-2242: CYLINDER HEAD GP

7W-2242 CYLINDER HEAD GP
S/N 38S16484-18721
PART OF 4W-7007 CYLINDER HEAD GP
i00108866 SEBP2746
7W2242 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2243 YC [1] CYLINDER HEAD AS  
2. 115-2368 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 115-2367 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27460102
 

174-4346: DAMPER & PULLEY GP

174-4346 DAMPER & PULLEY GP
S/N 38S16484-UP
SINGLE GROOVE ALTERNATOR PULLEY AND DAMPER WITH 81-MM LENGTH STUDS, DOES NOT INCLUDE FAN DRIVE PULLEY
AN ATTACHMENT
i01137409 SEBP2746
1744346 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8426 [12] STUD-TAPERLOCK (1/2-13X3.19-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27460103
 

5N-5322: DAMPER & PULLEY GP

5N-5322 DAMPER & PULLEY GP
S/N 38S16484-UP
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
AN ATTACHMENT
i00385434 SEBP2746
5N5322 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4399 [1] PULLEY (2-GROOVE)  
2. 167-8130 [1] DAMPER AS  
3. 6N-4400 [1] ADAPTER  
4. 0S-1587 [12] BOLT (1/2-13X1.75-IN)  
5. 1B-7538 [9] BOLT (5/8-18X5.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27460104
 

6N-7788: DAMPER & PULLEY GP

6N-7788 DAMPER & PULLEY GP
S/N 38S16484-UP
i00389200 SEBP2746
6N7788 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
2. 3N-9540 [1] PULLEY (1-GROOVE)  
3. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
  1F-7958 C [12] NUT-FULL (1/2-13-THD)  
5. 167-8130 [1] DAMPER AS  
6. 6N-7787 [1] ADAPTER-DAMPER  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27460105
 

7W-2365: DAMPER & PULLEY GP

7W-2365 DAMPER & PULLEY GP
S/N 38S16484-UP
REQUIRED WITH GENERATORS RATED 50 HERTZ AT 1500 RPM
i00431857 SEBP2746
7W2365 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
2. 3N-9540 [1] PULLEY (1-GROOVE)  
3. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
  1F-7958 [12] NUT-FULL (1/2-13-THD)  
5. 167-8131 [1] DAMPER AS  
6. 6N-7787 [1] ADAPTER-DAMPER  
  A   NOT PART OF THIS GROUP
 

#SEBP27460106
 

8N-5572: DAMPER & PULLEY GP

8N-5572 DAMPER & PULLEY GP
S/N 38S16484-UP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
ALSO AN ATTACHMENT
i00431413 SEBP2746
8N5572 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
7. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27460107
 

9Y-0651: DAMPER & PULLEY GP

9Y-0651 DAMPER & PULLEY GP
S/N 38S16484-UP
FOR USE WITH FIRE PUMP WITH WATER COOLED MANIFOLDS
ALSO AN ATTACHMENT
i00437070 SEBP2746
9Y0651 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)(1 GROOVE)  
4. 3D-0472 [12] STUD-TAPERLOCK (1/2-13X2.80-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27460108
 

5R-7994: DAMPER AS-VIBRATION

5R-7994 DAMPER AS-VIBRATION
S/N 38S16484-UP
AN ATTACHMENT
i00391587 SEBP2746
5R7994 DAMPER AS-VIBRATION Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-9709 [2] PLUG-EXPANSION  
 

#SEBP27460109
 

7N-8750: DRIVE GP-AUXILIARY

7N-8750 DRIVE GP-AUXILIARY
S/N 38S16484-UP
3 GROOVE PULLEY
CANNOT BE USED WITH HEAT EXCHANGER COOLED ENGINE
AN ATTACHMENT
i00411127 SEBP2746
7N8750 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-6683 [1] NUT (5/8-18-THD)  
2. 2W-5275 [1] GEAR (43-TEETH)  
3. 6V-5101 [1] SEAL-O-RING  
4. 4M-6107 [1] BEARING-INNER  
5. 8T-0209 [1] RACE-ROLLER BEARING  
6. 1K-6985 [1] RING-RETAINING (INTERNAL)  
7. 1B-4117 [1] BALL BEARING  
8. 7N-8751 [1] PULLEY-AUXILIARY DRIVE (3-GROOVE)  
9. 3J-0365 [1] SEAL-LIP TYPE  
10. 8T-5409 [5] STUD-TAPERLOCK (3/8-16X1.57-IN)  
11. 2W-7917 [1] SHAFT-AUXILIARY DRIVE  
12. 2W-3262 [1] HOUSING-AUXILIARY DRIVE  
13. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
14. 8L-9811 [1] RING-RETAINING  
15. 5F-8916 [1] LOCKWASHER  
16. 2H-3777 [1] LOCKNUT (1-5/8-18-THD)  
17. 7X-0513 [1] WASHER-HARD (17X30X5-MM THK)  
18. 6V-8801 [5] NUT (3/8-16-THD)  
19. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

Information:

Engine News
New Tool Makes Glow Plug Wire Removal Easier
1981/05/20
Service Manual Information About Inside Diameters Of Valve Guides
1981/10/21
New Fuel Nozzle Adapter Assembly Used
1982/02/24
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/04/07
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Improved Inlet And Exhaust Valves
1982/09/22
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
New Head Gasket Improves Seal Between Block And Liner Flange
1982/10/20
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
New Fuel Nozzle Adapters Used
1983/05/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New Inlet Valves Used In Cylinder Heads
1984/09/12
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System
1985/11/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Change To Interval For Valve Lash Adjustment
1987/02/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
Improved Head Gasket Used; Service Tips
1990/03/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
Dimensions For Aluminum Washer
1990/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Improved Exhaust Valve Now Available
1977/03/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
2014/10/10
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Exhaust Gas Leakage At Cylinder Head To Manifold Connection
Exhaust Gas Leakage At Cylinder Head To Manifold Connection
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Valves, Valve Springs And Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Heads
3408C & 3412C INDUSTRIAL ENGINES
Valves, Valve Springs And Valve Seat Inserts
3412 INDUSTRIAL AND MARINE ENGINES
Cylinder Heads
3412 INDUSTRIAL AND MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Service Letter-APD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Disassembly and Assembly
Cylinder Head
3408C & 3412C INDUSTRIAL ENGINES
Valves
3408C & 3412C INDUSTRIAL ENGINES
Valve Guides
3408C & 3412C INDUSTRIAL ENGINES
Bridge Dowels
3408C & 3412C INDUSTRIAL ENGINES
Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C INDUSTRIAL ENGINES
Glow Plugs (Precombustion Chambers)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES
Precombustion Chambers
3412 INDUSTRIAL & MARINE ENGINES
Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES
Cylinder Head Assemblies
3412 INDUSTRIAL & MARINE ENGINES
Valves
3412 INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3412 INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The Correct Water Temperature Contactor{1350,1100}
1980/02/11
Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/10/05
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Improved Inlet And Exhaust Valves{1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Lifting Eye Group Used On 3412 Industrial Engines Equipped With Turbochargers{1101,1000}
1978/04/10
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed{0644,1100}
1978/06/19
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05
New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06

Caterpillar Parts SIS Catalog 3412 :

CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
269-3676 CYLINDER HEAD GP
CYLINDER HEAD GP
269-3676 CYLINDER HEAD GP
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER BLOCK GP
4N-2624 CYLINDER BLOCK GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
DAMPER & PULLEY GP
174-4346 DAMPER & PULLEY GP
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
DAMPER & PULLEY GP
6N-7788 DAMPER & PULLEY GP
DAMPER & PULLEY GP
7W-2365 DAMPER & PULLEY GP
DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9Y-0651 DAMPER & PULLEY GP
DAMPER AS-VIBRATION
5R-7994 DAMPER AS-VIBRATION

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.