AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406C Generator Set 2WB11476-UP OPERATOR STATION Caterpillar SIS



GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406C Generator Set 2WB11476-UP SEBP2753 3406B 2WB   (1983)

Parts group 3406B:

  For full view, you need register
OPERATOR STATION
DOOR GP
DOOR GP-ACCESS
4W-9904 DOOR GP-ACCESS
4W-9904 DOOR GP-ACCESS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
360-FRAME
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
DOOR GP-ACCESS
7W-0202 DOOR GP-ACCESS
7W-0202 DOOR GP-ACCESS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
440-FRAME AND 580-FRAME
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
7C-3527 SEAL GP-ENCLOSURE
7C-3527 SEAL GP-ENCLOSURE
S/N 2WB11476-UP
CONTROL PANEL EMCP
AN ATTACHMENT
ENCLOSURE GP
7C-3527 SEAL GP-ENCLOSURE
7C-3527 SEAL GP-ENCLOSURE
S/N 2WB11476-UP
CONTROL PANEL EMCP
AN ATTACHMENT
PANEL GP
GAUGE GP-OIL FILTER PRESS DIFF
4W-3614 GAUGE GP-OIL FILTER PRESS DIFF
4W-3614 GAUGE GP-OIL FILTER PRESS DIFF
S/N 2WB11476-UP
FOR USE WITH @@@@@ 4W-1880@@@@@
AN ATTACHMENT
AMMETER GP
3N-9012 AMMETER GP
3N-9012 AMMETER GP
S/N 2WB11476-UP
60-AMPERE
FOR USE WITH PREMIUM INSTRUMENT PANEL
AN ATTACHMENT
AMMETER GP
8M-7892 AMMETER GP
8M-7892 AMMETER GP
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WB11476-UP
60-AMPERE
FOR USE WITH ALTERNATOR
AN ATTACHMENT
BOX GP-INSTRUMENT PANEL
3N-9015 BOX GP-INSTRUMENT PANEL
3N-9015 BOX GP-INSTRUMENT PANEL
S/N 2WB11476-UP
PART OF 5N-8288 PANEL GP-INSTRUMENT
AN ATTACHMENT
103-6101 CONTROL GP-ENGINE MONITORING
103-6101 CONTROL GP-ENGINE MONITORING
S/N 2WB11476-UP
WATER TEMPERATURE / OIL PRESSURE MODULE
AN ATTACHMENT
CONTROL GP-ENGINE MONITORING
3E-8542 CONTROL GP-ENGINE MONITORING
3E-8542 CONTROL GP-ENGINE MONITORING
S/N 2WB11476-UP
TEMPERATURE/PRESSURE MODULE
PART OF 7C-6513 CONTROL GP-EMCP ELECTRONIC
AN ATTACHMENT
COVER GP-CONTROL PANEL
192-0374 COVER GP-CONTROL PANEL
192-0374 COVER GP-CONTROL PANEL
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 9GF2800-UP
FOR USE WITH @@@@@107-3057@@@@@, @@@@@169-1875@@@@@, @@@@@169-1828@@@@@, @@@@@169-1831@@@@@, @@@@@169-1833@@@@@, @@@@@169-1834@@@@@, @@@@@175-1335@@@@@
AN ATTACHMENT
GAUGE GP
5L-9894 GAUGE GP
5L-9894 GAUGE GP -OIL PRESSURE, WATER TEMPERATURE
S/N 2WB11476-UP
12-VOLT
AN ATTACHMENT
GAUGE GP
5L-9895 GAUGE GP
5L-9895 GAUGE GP -ENGINE OIL PRESSURE, WATER TEMPERATURE
S/N 2WB11476-UP
24-VOLT TO 32-VOLT
AN ATTACHMENT
GAUGE GP-AIR INLET TEMPERATURE
3N-9008 GAUGE GP-AIR INLET TEMPERATURE
3N-9008 GAUGE GP-AIR INLET TEMPERATURE
S/N 2WB11476-UP
FOR DIRECT INJECTION TURBOCHARGED AFTERCOOLED AR
FOR USAGE REFER TO CHART @@@@@ 3N-8700@@@@@
AN ATTACHMENT
GAUGE GP-COOLANT TEMPERATURE
4W-0483 GAUGE GP-COOLANT TEMPERATURE
4W-0483 GAUGE GP-COOLANT TEMPERATURE
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
24-VOLT
PART OF 7W-0700 PANEL AR-CONTROL
AN ATTACHMENT
GAUGE GP-ENGINE OIL PRESSURE
7W-2937 GAUGE GP-ENGINE OIL PRESSURE
7W-2937 GAUGE GP-ENGINE OIL PRESSURE
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WB11476-UP
24-VOLT
PART OF 5L-9895 GAUGE GP
AN ATTACHMENT
GAUGE GP-FUEL PRESSURE
5R-4728 GAUGE GP-FUEL PRESSURE
5R-4728 GAUGE GP-FUEL PRESSURE
S/N 2WB11476-UP
ELECTRICAL
AN ATTACHMENT
GAUGE GP-FUEL PRESSURE
6N-8878 GAUGE GP-FUEL PRESSURE
6N-8878 GAUGE GP-FUEL PRESSURE
S/N 2WB11476-UP
AN ATTACHMENT
LAMP
3N-5588 LAMP
3N-5588 LAMP
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
6S6, 6 WATT, 30 VOLT. CANDELABRA BASE
FIELD INSTALLATION
LAMP GP
5N-3666 LAMP GP
5N-3666 LAMP GP
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
RELAY
FIELD INSTALLATION
LAMP GP-PANEL ILLUMINATION
4W-8183 LAMP GP-PANEL ILLUMINATION
4W-8183 LAMP GP-PANEL ILLUMINATION
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
METER GP-SERVICE
2W-8132 METER GP-SERVICE
2W-8132 METER GP-SERVICE
S/N 2WB11476-UP
REQUIRES 1500RPM ENGINE THAT HAS A CCW ROTATING SERVICE METER DRIVE
ALSO AN ATTACHMENT
METER GP-SERVICE
2W-8133 METER GP-SERVICE
2W-8133 METER GP-SERVICE
S/N 2WB11476-UP
FOR USE WITH 1800 RPM ENGINE
METER GP-SERVICE
2W-8605 METER GP-SERVICE
2W-8605 METER GP-SERVICE
S/N 2WB11476-UP
FOR USE WITH @@@@@ 2W-8901@@@@@, @@@@@ 2W-8903@@@@@, @@@@@ 4W-9601@@@@@, @@@@@ 4W-9602@@@@@
AN ATTACHMENT
METER GP-SERVICE
4W-9112 METER GP-SERVICE
4W-9112 METER GP-SERVICE
S/N 2WB11476-UP
FOR USE WITH @@@@@ 1W-1182@@@@@, @@@@@ 1W-1183@@@@@, @@@@@ 2W-8030@@@@@, @@@@@ 7W-0043@@@@@
METER GP-SERVICE
4W-9113 METER GP-SERVICE
4W-9113 METER GP-SERVICE
S/N 2WB11476-17315; 2WB17812-UP
FOR USE WITH @@@@@ 1W-1182@@@@@, @@@@@ 1W-1183@@@@@, @@@@@ 2W-8030@@@@@, @@@@@ 7W-9008@@@@@, 50-HZ GEN SETS WITH WOODWARD GOVERNOR (PSG OR 2301 EGEP) CLOCKWISE ROTATION
METER GP-SERVICE
7C-2267 METER GP-SERVICE
7C-2267 METER GP-SERVICE
S/N 2WB11476-UP
METER GP-SERVICE
7C-3354 METER GP-SERVICE
7C-3354 METER GP-SERVICE
S/N 2WB11476-UP
METER GP-SERVICE
7C-3433 METER GP-SERVICE
7C-3433 METER GP-SERVICE
S/N 2WB11476-UP
ELECTRIC
CANNOT BE USED WITH ELECTRIC SELF-POWERED TACHOMETER, 2301 GOVERNOR, OR SHUTOFF GROUPS WHICH CONTAIN AN ENGINE MOUNTED JUNCTION BOX
AN ATTACHMENT
METER GP-VOLT
4W-8184 METER GP-VOLT
4W-8184 METER GP-VOLT
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
DC
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE AS
6I-3836 MODULE AS
6I-3836 MODULE AS
S/N 8JF1-UP; 8KF1-UP; 8LF1-UP; 9FF1-UP
PART OF 4P-3845, 4P-3846 TRANSFORMER GP-CURRENT
ALSO AN ATTACHMENT
MODULE AS
9Y-0931 MODULE AS
9Y-0931 MODULE AS -BOOST
S/N 2WD1775-UP
PART OF 9Y-3887 TRANSFORMER GP-CURRENT
AN ATTACHMENT
MODULE AS
9Y-3845 MODULE AS
9Y-3845 MODULE AS -BOOST
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 9GF2800-UP
PART OF 9Y-3885, 9Y-7647 TRANSFORMER GP-CURRENT
AN ATTACHMENT
MODULE GP-AUXILIARY RELAY
3N-7818 MODULE GP-AUXILIARY RELAY
3N-7818 MODULE GP-AUXILIARY RELAY
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
AN ATTACHMENT AND FIELD INSTALLATION
MODULE GP-AUXILIARY RELAY
4W-8009 MODULE GP-AUXILIARY RELAY
4W-8009 MODULE GP-AUXILIARY RELAY
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE GP-CYCLE CRANKING
3N-5568 MODULE GP-CYCLE CRANKING
3N-5568 MODULE GP-CYCLE CRANKING
S/N 5GA4300-UP; 5HA5700-UP
FIELD INSTALLATION
MODULE GP-CYCLE CRANKING
4W-8007 MODULE GP-CYCLE CRANKING
4W-8007 MODULE GP-CYCLE CRANKING
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE GP-RELAY DRIVER
123-7450 MODULE GP-RELAY DRIVER
123-7450 MODULE GP-RELAY DRIVER
S/N 2WB11476-UP; 2WD1775-UP; 9GF2800-UP
PART OF 148-5368, 163-4192 MODULE GP-RELAY DRIVER
AN ATTACHMENT
148-5368 MODULE GP-RELAY DRIVER
148-5368 MODULE GP-RELAY DRIVER
S/N 2WD1775-UP; 9GF2800-UP
FOR USE WITH GENERATOR MOUNTED EMCP II+ CONTROL PANEL
AN ATTACHMENT
163-4192 MODULE GP-RELAY DRIVER
163-4192 MODULE GP-RELAY DRIVER
S/N 2WB11476-UP
FOR USE WITH EMCP II PANELS
AN ATTACHMENT
MODULE GP-RELAY DRIVER
9X-0203 MODULE GP-RELAY DRIVER
9X-0203 MODULE GP-RELAY DRIVER
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WB11476-UP; 2WD1775-UP
PART OF 9Y-6496 MODULE GP-INTERFACE
FOR USE WITH EMCP CONTROL PANELS
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
106-5169 MODULE GP-SYNCHRONIZING LIGHTS
106-5169 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
600-VOLT. PROVIDES SYNCHRONIZING MODULE OPTION FOR THE ELECTRONIC MODULAR CONTROL PANEL (EMCP II)
FOR USAGE REFER TO CHART @@@@@103-1582@@@@@
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
106-5171 MODULE GP-SYNCHRONIZING LIGHTS
106-5171 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
480-VOLT
FOR USAGE REFER TO CHART @@@@@103-1582@@@@@
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
4W-8002 MODULE GP-SYNCHRONIZING LIGHTS
4W-8002 MODULE GP-SYNCHRONIZING LIGHTS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
4W-8003 MODULE GP-SYNCHRONIZING LIGHTS
4W-8003 MODULE GP-SYNCHRONIZING LIGHTS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
REVERSE POWER RELAY SYSTEM
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
4W-9311 MODULE GP-SYNCHRONIZING LIGHTS
4W-9311 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
4W-9312 MODULE GP-SYNCHRONIZING LIGHTS
4W-9312 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
24VDC WITH REVERSE POWER
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
5N-3388 MODULE GP-SYNCHRONIZING LIGHTS
5N-3388 MODULE GP-SYNCHRONIZING LIGHTS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
FIELD INSTALLATION
MODULE GP-SYNCHRONIZING LIGHTS
7C-1002 MODULE GP-SYNCHRONIZING LIGHTS
7C-1002 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
480 VOLT. EMCP
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
7C-3262 MODULE GP-SYNCHRONIZING LIGHTS
7C-3262 MODULE GP-SYNCHRONIZING LIGHTS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
600 VOLT, AC
PART OF 7W-0700 PANEL AR-CONTROL
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
7C-3263 MODULE GP-SYNCHRONIZING LIGHTS
7C-3263 MODULE GP-SYNCHRONIZING LIGHTS
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
600 VOLT, AC
PART OF 7W-0700 PANEL AR-CONTROL
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
7C-4725 MODULE GP-SYNCHRONIZING LIGHTS
7C-4725 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
EMCP-600 VOLT
FOR USAGE REFER TO CHART @@@@@ 7C-1000@@@@@
AN ATTACHMENT
MODULE GP-SYNCHRONIZING LIGHTS
7W-3372 MODULE GP-SYNCHRONIZING LIGHTS
7W-3372 MODULE GP-SYNCHRONIZING LIGHTS
S/N 2WB11476-UP
32 VOLT DC WITH REVERSE POWER
AN ATTACHMENT
MODULE GP-SYSTEM COMMUNICATION
102-8627 MODULE GP-SYSTEM COMMUNICATION
102-8627 MODULE GP-SYSTEM COMMUNICATION
S/N 2WB11476-UP
AN ATTACHMENT
MODULE GP-SYSTEM COMMUNICATION
164-8940 MODULE GP-SYSTEM COMMUNICATION
164-8940 MODULE GP-SYSTEM COMMUNICATION
S/N 2WB11476-UP
PART OF 102-8627 MODULE GP-SYSTEM COMMUNICATION
AN ATTACHMENT
MODULE GP-TIMER
4W-8008 MODULE GP-TIMER
4W-8008 MODULE GP-TIMER
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
COOL DOWN
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MOUNTING GP-CONTROL PANEL
104-4704 MOUNTING GP-CONTROL PANEL
104-4704 MOUNTING GP-CONTROL PANEL -EMCP II
S/N 5GA4300-UP; 5HA5700-UP; 8KF1-UP; 8LF1-UP; 9FF1-UP
FOR USAGE REFER TO CHART @@@@@103-1582@@@@@
AN ATTACHMENT
MOUNTING GP-CONTROL PANEL
7W-0919 MOUNTING GP-CONTROL PANEL
7W-0919 MOUNTING GP-CONTROL PANEL
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 8JF1-UP; 8KF1-UP; 8LF1-UP
PROVIDES VIBRATION ISOLATION DURING NORMAL OPERATION
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
2W-7295 MOUNTING GP-INSTRUMENT PANEL
2W-7295 MOUNTING GP-INSTRUMENT PANEL
S/N 2WB11476-UP
LH
FOR USAGE REFER TO CHART @@@@@ 3N-8700@@@@@
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
7E-7078 MOUNTING GP-INSTRUMENT PANEL
7E-7078 MOUNTING GP-INSTRUMENT PANEL
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WD1775-UP; 5DD625-UP; 8JF1-UP; 8KF1-UP; 8LF1-UP; 9FF1-UP; 9GF2800-UP
FOR USAGE REFER TO CHART @@@@@ 7E-4300@@@@@
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
9Y-5654 MOUNTING GP-INSTRUMENT PANEL
9Y-5654 MOUNTING GP-INSTRUMENT PANEL -LH
S/N 2WB11476-UP
FOR USE WITH CENTER MOUNTED TURBOCHARGER
AN ATTACHMENT
7W-0700 PANEL AR-CONTROL
7W-0700 PANEL AR-CONTROL
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
GENERATOR MOUNTED
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
PANEL GP-ELECTRONIC
5N-4261 PANEL GP-ELECTRONIC
5N-4261 PANEL GP-ELECTRONIC
S/N 5GA4300-UP; 5HA5700-UP
BOOST SERIES
AN ATTACHMENT
PANEL GP-INSTRUMENT
4W-6049 PANEL GP-INSTRUMENT
4W-6049 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
FOR USE WITH AFTERCOOLED ENGINE AR.
AN ATTACHMENT
PANEL GP-INSTRUMENT
4W-6050 PANEL GP-INSTRUMENT
4W-6050 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
FOR USE WITH NON AFTERCOOLED ENGINE AR.
AN ATTACHMENT
PANEL GP-INSTRUMENT
5N-8288 PANEL GP-INSTRUMENT
5N-8288 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
FOR USAGE REFER TO CHART @@@@@ 3N-8700@@@@@
AN ATTACHMENT
PANEL GP-INSTRUMENT
7C-3085 PANEL GP-INSTRUMENT
7C-3085 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
REMOTE
AN ATTACHMENT
PANEL GP-INSTRUMENT
7C-5130 PANEL GP-INSTRUMENT
7C-5130 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
REMOTE NFPA-110 EMCP
AN ATTACHMENT
PANEL GP-INSTRUMENT
7C-5296 PANEL GP-INSTRUMENT
7C-5296 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
REMOTE ANNUCIATOR, NATIONAL FIRE PROTECTION ASSOCIATION 99
FOR USE WITH EMCP CONTROL PANEL
AN ATTACHMENT
PANEL GP-INSTRUMENT
7E-8270 PANEL GP-INSTRUMENT
7E-8270 PANEL GP-INSTRUMENT
S/N 2WB11476-UP
REMOTE, NATIONAL FIRE PROTECTION ASSOCIATION 110
FOR USE WITH EMCP CONTROL PANEL
CANNOT BE USED WITH ANALOG CONTROL PANEL
AN ATTACHMENT
7C-3527 SEAL GP-ENCLOSURE
7C-3527 SEAL GP-ENCLOSURE
S/N 2WB11476-UP
CONTROL PANEL EMCP
AN ATTACHMENT
9Y-7903 SWITCH AS-TRANSFER
9Y-7903 SWITCH AS-TRANSFER
S/N 2WB11476-UP
100 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7904 SWITCH AS-TRANSFER
9Y-7904 SWITCH AS-TRANSFER
S/N 2WB11476-UP
150/200 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7905 SWITCH AS-TRANSFER
9Y-7905 SWITCH AS-TRANSFER
S/N 2WB11476-UP
300 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7906 SWITCH AS-TRANSFER
9Y-7906 SWITCH AS-TRANSFER
S/N 2WB11476-UP
400 AMPERE, 3 POLE 600 VOLT AC
AN ATTACHMENT
9Y-7907 SWITCH AS-TRANSFER
9Y-7907 SWITCH AS-TRANSFER
S/N 2WB11476-UP
600 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7908 SWITCH AS-TRANSFER
9Y-7908 SWITCH AS-TRANSFER
S/N 2WB11476-UP
800 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7909 SWITCH AS-TRANSFER
9Y-7909 SWITCH AS-TRANSFER
S/N 2WB11476-UP
1000 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7910 SWITCH AS-TRANSFER
9Y-7910 SWITCH AS-TRANSFER
S/N 2WB11476-UP
1200 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7911 SWITCH AS-TRANSFER
9Y-7911 SWITCH AS-TRANSFER
S/N 2WB11476-UP
1600 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7912 SWITCH AS-TRANSFER
9Y-7912 SWITCH AS-TRANSFER
S/N 2WB11476-UP
2000 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7913 SWITCH AS-TRANSFER
9Y-7913 SWITCH AS-TRANSFER
S/N 2WB11476-UP
2600 AMPERE, 3 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-7918 SWITCH AS-TRANSFER
9Y-7918 SWITCH AS-TRANSFER
S/N 2WB11476-UP
2600 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8025 SWITCH AS-TRANSFER
9Y-8025 SWITCH AS-TRANSFER
S/N 2WB11476-UP
100 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8026 SWITCH AS-TRANSFER
9Y-8026 SWITCH AS-TRANSFER
S/N 2WB11476-UP
150/200 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8027 SWITCH AS-TRANSFER
9Y-8027 SWITCH AS-TRANSFER
S/N 2WB11476-UP
300 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8028 SWITCH AS-TRANSFER
9Y-8028 SWITCH AS-TRANSFER
S/N 2WB11476-UP
400 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8029 SWITCH AS-TRANSFER
9Y-8029 SWITCH AS-TRANSFER
S/N 2WB11476-UP
600 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8030 SWITCH AS-TRANSFER
9Y-8030 SWITCH AS-TRANSFER
S/N 2WB11476-UP
800 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8031 SWITCH AS-TRANSFER
9Y-8031 SWITCH AS-TRANSFER
S/N 2WB11476-UP
1000 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8032 SWITCH AS-TRANSFER
9Y-8032 SWITCH AS-TRANSFER
S/N 2WB11476-UP
1200 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8033 SWITCH AS-TRANSFER
9Y-8033 SWITCH AS-TRANSFER
S/N 2WB11476-UP
1600 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
9Y-8034 SWITCH AS-TRANSFER
9Y-8034 SWITCH AS-TRANSFER
S/N 2WB11476-UP
2000 AMPERE, 4 POLE, 600 VOLT AC
AN ATTACHMENT
TIMER GP
5N-3387 TIMER GP
5N-3387 TIMER GP -COOL DOWN
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
FIELD INSTALLATION
VOLTMETER GP
105-1457 VOLTMETER GP
105-1457 VOLTMETER GP
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
24-VOLT
PART OF 4W-8184 METER GP-VOLT
AN ATTACHMENT
CHART-CONTROL PANEL
103-1582 CHART-CONTROL PANEL
103-1582 CHART-CONTROL PANEL
S/N 2WB11476-UP
EMCP II, GENERATOR MOUNTED
AN ATTACHMENT
CHART-CONTROL PANEL
4W-8000 CHART-CONTROL PANEL
4W-8000 CHART-CONTROL PANEL
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WD1775-UP
TOP MOUNTED
FOR USE WITH STANDBY OR PRIME POWER PACKAGE
AN ATTACHMENT
CHART-CONTROL PANEL
7C-1000 CHART-CONTROL PANEL
7C-1000 CHART-CONTROL PANEL
S/N 2WB11476-UP
GENERATOR MOUNTED ELECTRONIC MODULAR
FOR USE WITH STANDBY OR PRIME POWER PACKAGE
AN ATTACHMENT
CHART-INSTRUMENT PANEL
3N-8700 CHART-INSTRUMENT PANEL
3N-8700 CHART-INSTRUMENT PANEL
S/N 2WB11476-UP
MOUNTING & CONNECTIONS
AN ATTACHMENT
CHART-INSTRUMENT PANEL
7E-4300 CHART-INSTRUMENT PANEL
7E-4300 CHART-INSTRUMENT PANEL
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WD1775-UP; 5DD625-UP; 8JF1-UP; 8KF1-UP; 8LF1-UP; 9FF1-UP; 9GF2800-UP
GENERATOR MOUNTED
AN ATTACHMENT
CHART-TRANSFER SWITCH
9Y-7900 CHART-TRANSFER SWITCH
9Y-7900 CHART-TRANSFER SWITCH
S/N 2WB11476-UP
50/60-HZ. 100-AMPERE TO 2600-AMPERE. CONTACTOR TYPE
FOR USE WITH 9Y-7902 PANEL AR-TRANSFER SWITCH
AN ATTACHMENT
PYROMETER GP
PYROMETER GP
3N-7012 PYROMETER GP
3N-7012 PYROMETER GP
S/N 2WB11476-UP
300-1300 DEG F
FOR USE WITH PREMIUM INSTRUMENT PANEL
AN ATTACHMENT
TACHOMETER GP
DRIVE GP-TACHOMETER
1W-8235 DRIVE GP-TACHOMETER
1W-8235 DRIVE GP-TACHOMETER
S/N 2WB11476-UP
SINGLE
AN ATTACHMENT
DRIVE GP-TACHOMETER
4W-1101 DRIVE GP-TACHOMETER
4W-1101 DRIVE GP-TACHOMETER
S/N 2WB11476-UP
DUAL
CANNOT BE USED WITH WOODWARD GOVERNOR
AN ATTACHMENT
MOUNTING GP-TACHOMETER
7L-4535 MOUNTING GP-TACHOMETER
7L-4535 MOUNTING GP-TACHOMETER
S/N 2WB11476-UP
FOR USE WITH ENGINE MOUNTED MECHANICAL TACHOMETERS
AN ATTACHMENT
TACHOMETER GP-ELECTRIC
7C-1072 TACHOMETER GP-ELECTRIC
7C-1072 TACHOMETER GP-ELECTRIC
S/N 2WB11476-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, C32 SCAC AUX MARINE ENGINES
AN ATTACHMENT
TACHOMETER GP-ELECTRIC
7E-3157 TACHOMETER GP-ELECTRIC
7E-3157 TACHOMETER GP-ELECTRIC
S/N 2WB11476-UP
156 TOOTH PICKUP, ADJUSTABLE
AN ATTACHMENT
ALARM GP
ALARM GP
5N-5451 ALARM GP
5N-5451 ALARM GP
S/N 2WB11476-UP
24 VOLT DC
AN ATTACHMENT
ALARM GP
5N-5452 ALARM GP
5N-5452 ALARM GP
S/N 2WB11476-UP
30-32 VOLT DC
AN ATTACHMENT
MODULE GP-ALARM
130-3349 MODULE GP-ALARM
130-3349 MODULE GP-ALARM
S/N 2WB11476-UP
REMOTE
PART OF 7E-1234, 9W-3577, 9Y-2906, 9Y-2907 MODULE GP-ALARM
AN ATTACHMENT
MODULE GP-ALARM
4W-8006 MODULE GP-ALARM
4W-8006 MODULE GP-ALARM
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
NFPA, 99-AMPERES
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE GP-ALARM
7C-3084 MODULE GP-ALARM
7C-3084 MODULE GP-ALARM
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
NFPA - 110 AMPERES
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
MODULE GP-ALARM
7E-1234 MODULE GP-ALARM
7E-1234 MODULE GP-ALARM
S/N 2WB11476-UP
FOR USAGE REFER TO CHART @@@@@ 7C-1000@@@@@
AN ATTACHMENT
MODULE GP-ALARM
7W-9023 MODULE GP-ALARM
7W-9023 MODULE GP-ALARM
S/N 2WB11476-UP
STANDBY
AN ATTACHMENT
MODULE GP-ALARM
7W-9024 MODULE GP-ALARM
7W-9024 MODULE GP-ALARM
S/N 2WB11476-UP
PRIME
AN ATTACHMENT
MODULE GP-ALARM
9W-3577 MODULE GP-ALARM
9W-3577 MODULE GP-ALARM
S/N 2WB11476-UP
NATIONAL FIRE PROTECTION ASSOCIATION 99
PART OF 7C-5296 PANEL GP-INSTRUMENT
AN ATTACHMENT
MODULE GP-ALARM
9Y-2906 MODULE GP-ALARM
9Y-2906 MODULE GP-ALARM
S/N 2WB11476-UP
NATIONAL FIRE PROTECTION ASSOCIATION 110
FOR USAGE REFER TO CHART @@@@@ 7C-1000@@@@@
AN ATTACHMENT
MODULE GP-ALARM
9Y-2907 MODULE GP-ALARM
9Y-2907 MODULE GP-ALARM
S/N 2WB11476-UP
NATIONAL FIRE PROTECTION ASSOCIATION 99
FOR USAGE REFER TO CHART @@@@@ 7C-1000@@@@@
AN ATTACHMENT
CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
102-8619 CONTROL GP-EMCP ELECTRONIC
102-8619 CONTROL GP-EMCP ELECTRONIC
S/N 2WB11476-UP
FUEL CONTROL TIMER
PART OF 111-7761 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
CONTROL GP-EMCP ELECTRONIC
6V-6153 CONTROL GP-EMCP ELECTRONIC
6V-6153 CONTROL GP-EMCP ELECTRONIC
S/N 2WB11476-UP
PART OF 9Y-2905 CONTROL GP-EMCP ELECTRONIC
AN ATTACHMENT
7C-6513 CONTROL GP-EMCP ELECTRONIC
7C-6513 CONTROL GP-EMCP ELECTRONIC
S/N 2WB11476-UP
WATER TEMPERATURE/OIL PRESSURE
AN ATTACHMENT
CONTROL GP-EMCP ELECTRONIC
7T-9868 CONTROL GP-EMCP ELECTRONIC
7T-9868 CONTROL GP-EMCP ELECTRONIC
S/N 2WB11476-UP
EMCP-AC METER
AN ATTACHMENT
CONTROL GP-EMCP ELECTRONIC
9Y-2905 CONTROL GP-EMCP ELECTRONIC
9Y-2905 CONTROL GP-EMCP ELECTRONIC
S/N 2WB11476-UP
FOR USAGE REFER TO CHART @@@@@ 7C-1000@@@@@
AN ATTACHMENT
FILTER GP-ELECTRONIC
FILTER AS-ELECTRONIC
6I-3837 FILTER AS-ELECTRONIC
6I-3837 FILTER AS-ELECTRONIC
S/N 8JF1-UP; 8KF1-UP; 8LF1-UP; 9FF1-UP
240 VOLT. 440 FRAME
AN ATTACHMENT
FILTER AS-ELECTRONIC
9Y-5037 FILTER AS-ELECTRONIC
9Y-5037 FILTER AS-ELECTRONIC
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 9GF2800-UP
FOR USE WITH VR3 VOLTAGE REGULATOR
AN ATTACHMENT
9Y-5038 FILTER AS-ELECTRONIC
9Y-5038 FILTER AS-ELECTRONIC
S/N 2WD1775-UP; 5DD625-UP
FOR USE WITH VR3 VOLTAGE REGULATOR
AN ATTACHMENT
KIT-RFI FILTER
9Y-0968 KIT-RFI FILTER
9Y-0968 KIT-RFI FILTER
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP; 2WD1775-UP; 5DD625-UP; 9GF2800-UP
RADIO FREQUENCY INTERFERENCE
PART OF 9Y-5037, 9Y-5038 FILTER AS-ELECTRONIC
FOR USE WITH VR3 VOLTAGE REGULATOR
AN ATTACHMENT

Information:

(For parts list, see above)

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2002/07/08
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
3400 Engine Major Component Performance Guide Available{0374}
1987/07/06
Similar Product Support Literature Available For Military Machines{7567}
1998/06/15
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Engine News
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel
1988/12/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Unwanted Engine Shutdown Caused By "01" And/Or "04" Diagnostic; New "09" Diagnostic Available With 8T9881-8 Electronic Control Module (ECM)
1991/05/01
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Ether Starting Aid
3400 GENERATOR SET ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By "01" And/Or "04" Diagnostic; New "09" Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2002/07/08
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New "Two Inch" Gauges, Indicator And Senders Available{7450}
1986/06/02
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01
New Digital Tachometers Available As Attachments
1990/07/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Australia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-CFEL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-CSARL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Americas
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Brazil
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-China
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Asia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Systems Operation
ETS Junction Box-Switchgear Required (OP,WT,OS)
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
Service Letter-APD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Magazine
New Mechanical Service Meter Used{7478}
1984/07/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation{7456}
1985/06/24
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Use Improved Heat Start Switch{1416}
1987/04/20
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/10/30
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By "01" And/Or "04" Diagnostic; New "09" Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
Improved Mounting Reduces Vibration To Liquid Level Switch{7470}
1993/07/26
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Engine News
Engine Will Not Restart Immediately After It Has Been Shut Down
1984/02/22
New Mechanical Service Meter Used
1984/07/11
Rubber Bumpers Limit Movement Of Control Panel
1984/09/12
Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation
1985/07/01
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switchgear
1987/01/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel
1988/12/01
Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01
New Digital Tachometers Available As Attachments
1990/07/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM)
1991/05/01
New NFPA 110 Remote Annunciator Panel {4490,7002}
1995/05/01
Changes To EMCP I Control Panel{4450}
1996/11/01
Changes To Default Overcurrent Settings For EMCP II+ {4490}
1997/08/01
Improved Data Logger Feature For Customer Communication Module{1926}
1999/04/01
Correction to Testing and Adjusting Module, SENR5832, Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines {4490}
2000/12/01
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
Correction to Testing and Adjusting, &quot;Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines&quot; {4490}
2002/02/01
A New Temperature Gauge is Used {7450}
2007/08/27
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Australia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-CFEL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-CSARL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Americas
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Brazil
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Specifications
Ether Starting Aid
3400 GENERATOR SET ENGINE ATTACHMENTS
Fuel Pressure Gauges
3400 GENERATOR SET ENGINE ATTACHMENTS
Gauges For Water Temperature<BR> (Electric)
3400 GENERATOR SET ENGINE ATTACHMENTS
Gauges For Engine Oil Pressure<BR> (Electric)
3400 GENERATOR SET ENGINE ATTACHMENTS
Ammeters
3400 GENERATOR SET ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Service Letter-Asia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Systems Operation
Normal Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine/Generator Programming OP5
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Hourmeter Programming OP7
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Component Location
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (Generator Set)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AC Offset Adjustment OP10
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Relay Driver Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Shutdown Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Log Viewing OP1
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine/Generator Setpoint Viewing OP2
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Password Entry OP3
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Log Clearing OP4
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Voltmeter/Ammeter Programming OP8
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Modes Of Operation
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Generator Set Load Sensor
System Operation
Generator Set Load Sensor
General Information
Generator Set Load Sharing Module
System Operation
Generator Set Load Sharing Module
Data Link
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Description
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Instrument Panel
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Spare Input/Output Programming OP6
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine Setpoint Verification OP9
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AL Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
SP Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Letter-APD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Testing and Adjusting
Indicator for Engine Overspeed - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Undiagnosed Problems
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AC Voltage Range - Adjust
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (Generator Set) - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Relay Module - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 268 FMI 2 EMCP Electronic Control (Generator Set) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 442 FMI 12 Generator Fault Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 500 FMI 12 EMCP Electronic Control (Generator Set) Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Block Diagram of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Identification
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AL Fault Code - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Dedicated Shutdown Indicators
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Low Oil Pressure - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for High Water Temperature - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Low Coolant Level - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Record
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Phasing - Check
Generator Set Load Sensor
Engine Does Not Share Load - Troubleshoot
Generator Set Load Sensor
Engine Will Not Operate in Parallel - Troubleshoot
Generator Set Load Sensor
Undesired Speed Decrease with Load Increase - Troubleshoot
Generator Set Load Sensor
Erratic Operation of Load Sensor - Troubleshoot
Generator Set Load Sensor
Load Signal Voltage Is Low - Troubleshoot
Generator Set Load Sensor
Load Signal Voltage Is High - Troubleshoot
Generator Set Load Sensor
Engine Does Not Properly Share Load - Troubleshoot
Generator Set Load Sensor
Troubleshooting Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Installation Requirements
Generator Set Load Sensor
CID 248 FMI 9 CAT Data Link Abnormal Update - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 330 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 566 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 331 FMI 2 Switch (Engine Control) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 336 FMI 2 Switch (Engine Control) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 334 FMI 3 Spare Output Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 334 FMI 4 Spare Output Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 443 FMI 12 Crank Termination Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 444 FMI 12 Starting Motor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Phasing - Adjust
Generator Set Load Sensor
CID 445 FMI 12 Run Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 446 FMI 12 Air Shutoff Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 447 FMI 12 Fuel Control Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Droop - Adjust
Generator Set Load Sensor
CID 560 FMI 11 CAT Data Link Failure Mode Not Identified - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
SP Fault Code - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Load Gain - Adjust
Generator Set Load Sensor
Wiring Diagrams
Generator Set Load Sensor
Indicator for Emergency Stop - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Overcrank - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
No Engine Shutdown - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Erratic GSC Operation - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Phasing - Check
Generator Set Load Sharing Module
Engine Does Not Share Load - Troubleshoot
Generator Set Load Sharing Module
Engine Will Not Operate in Parallel - Troubleshoot
Generator Set Load Sharing Module
Undesired Speed Decrease with Load Increase - Troubleshoot
Generator Set Load Sharing Module
Erratic Operation of Load Sharing Module - Troubleshoot
Generator Set Load Sharing Module
Load Signal Voltage Is Low - Troubleshoot
Generator Set Load Sharing Module
Load Signal Voltage Is High - Troubleshoot
Generator Set Load Sharing Module
Engine Does Not Properly Share Load - Troubleshoot
Generator Set Load Sharing Module
Wiring Diagrams
Generator Set Load Sharing Module
Droop - Adjust
Generator Set Load Sharing Module
Load Gain - Adjust
Generator Set Load Sharing Module
Phasing - Adjust
Generator Set Load Sharing Module
Installation Requirements
Generator Set Load Sharing Module
Inaccurate Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 441 FMI 12 Electronic Governor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Symbols
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Typical Generator Abbreviations
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Disassembly and Assembly
Control Panel
3406B DIESEL ENGINE FOR GENERATOR SETS
Control Panels
3406B DIESEL ENGINE FOR GENERATOR SETS
Control Panel Enclosure
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Engine Will Not Restart Immediately After It Has Been Shut Down{7002,7421}
1984/02/13
New Mechanical Service Meter Used{7478}
1984/07/16
Rubber Bumpers Limit Movement Of Control Panel{7421,7002}
1984/09/03
Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation{7456}
1985/06/24
Meter Panel Cover Folds Down Completely {7451}
1985/11/04
New Instruction Films (Decals) Available {7405,7451}
1985/11/04
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/10/30
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
New Engine Control Module For EMCP Now Available{4450,4490}
1992/07/27
Improved Mounting Reduces Vibration To Liquid Level Switch{7470}
1993/07/26
An Updated Service Manual Module, SENR6565-02, "Generator Set Load Sensor And Generator Set Load Sharing Module" Is Available {4490}
1999/12/01
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Service Magazine
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New 12 Volt AM/FM Radios Are Available {7338}
2000/03/20
Special Instruction
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Technical Information Bulletin
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Service Magazine
New Liner Seat Insert Available{1217}
1983/08/15
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Liner Seat Inserts Available{1217}
1992/11/09
Engine News
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
New Digital Tachometers Available As Attachments
1990/07/01
New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
2001/08/01
Specifications
Fuel Transfer Pump And Tachometer Drive (3406)
3406 & 3406B GENERATOR SET ENGINE
Service Magazine
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Testing and Adjusting
Service Tools
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Systems Operation
Alarm Module Control (NFPA 110)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Module Control (Custom)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Synchronizing Lights Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Synchronizing Lights Module With Reverse Power Relay
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Modules
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Testing and Adjusting
Alarm Module Control - Adjust
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 333 FMI 3 Alarm Module Control Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 333 FMI 4 Alarm Module Control Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19
Systems Operation
Customer Interface Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
System Communication Module (Customer)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Testing and Adjusting
Alarm Module or Remote Annunciator - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (AC Transformer Box) - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products{0354,0370,0374,0375,1022,4450}
1989/08/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.