AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-0741 CRANKSHAFT GP S/N 2WB11476-UP Type 2 3406B GEN SET ENGINE


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406C Generator Set 2WB11476-UP SEBP2753 3406B 2WB   (1983)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
243-6718 KIT-CRANKSHAFT BEARING
180-5425 KIT-ENGINE REPAIR
180-5426 KIT-ENGINE REPAIR
4P-9348 KIT-ENGINE REPAIR
4W-6055 KIT-ENGINE REPAIR
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
 

#SEBP27530060
 

4N-0741: CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
S/N 2WB11476-UP
Type 2
i05941433 SEBP2753
4N0741 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
2. 430-2593 Y [1] CRANKSHAFT AS  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJY [1] KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530061
 

202-1257: CYLINDER BLOCK AS

202-1257 CYLINDER BLOCK AS
S/N 2WB18353-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
i01570723 SEBP2753
2021257 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8081 [7] CAP-CRANKSHAFT BEARING  
2. 167-8083 [14] BOLT (7/8-14X7.5-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP27530062
 

463-3536: CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS
S/N 2WB18353-UP
PART OF 202-1258 CYLINDER BLOCK GP
i06280842 SEBP2753
4633536 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0685 [6] BUSHING (1-IN WIDE)  
2. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
3. 202-1257 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530063
 

108-3914: CYLINDER BLOCK GP

108-3914 CYLINDER BLOCK GP
S/N 2WB14025-UP
PART OF 108-3916 CYLINDER BLOCK GP
i00482453 SEBP2753
1083914 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
2. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP27530064
 

108-3916: CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 2WB14025-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@, @@@@@ 8N-9267@@@@@
i00123090 SEBP2753
1083916 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5155 [1] SEAL-O-RING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE  
4. 9S-8009 [3] PLUG-O-RING  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 9X-7378 [1] SEAL-O-RING  
13. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
14. 4N-0685 [6] BUSHING (1-IN WIDE)  
15. 7X-7732 [6] PLUG-PIPE  
16. 114-4427 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 108-3914 Y [1] CYLINDER BLOCK GP  
19. 3E-6747 [2] SEAL-O-RING  
20. 100-7399 [2] PLUG  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530065
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 2WB14025-18352
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@, @@@@@ 7E-4697@@@@@
i00729861 SEBP2753
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 152-7644 Y [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 3E-6747 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530066
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 2WB18353-UP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@, @@@@@ 7E-4697@@@@@
i01625329 SEBP2753
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 202-1257 CY [1] CYLINDER BLOCK AS  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)(MARKED X)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 250-0466 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
   
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)  
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530067
 

152-7644: CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP
S/N 2WB14025-18352
PART OF 152-7642 CYLINDER BLOCK GP
i00734657 SEBP2753
1527644 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
3. 4N-0795 [7] CAP-CRANKSHAFT BEARING  
 

#SEBP27530068
 

202-1258: CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP
S/N 2WB18353-UP
PART OF 7E-4697, 8N-9267 CYLINDER BLOCK GP
i01538305 SEBP2753
2021258 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
2. 197-9322 [6] LINER-CYLINDER BLOCK  
3. 463-3536 Y [1] CYLINDER BLOCK AS  
4. 110-2220 [6] SEAL-LINER  
5. 142-6217 [6] SEAL-O-RING  
6. 142-7072 [6] SEAL-LINER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530069
 

4P-3720: CYLINDER BLOCK GP

4P-3720 CYLINDER BLOCK GP
S/N 2WB11476-14024
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@, @@@@@ 8N-9267@@@@@
i00147180 SEBP2753
4P3720 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-1388 [1] SEAL-O-RING  
2. 9F-2247 [3] PLUG-PIPE  
3. 7M-7410 [1] PLUG-PIPE  
4. 9S-8009 [3] PLUG-O-RING  
5. 7H-3171 [3] PLUG-PIPE  
6. 4P-2098 [1] CYLINDER BLOCK AS  
  4N-5857 [1] CAP-CRANKSHAFT BEARING  
  3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
7. 5M-6214 [1] PLUG (1/8-27 PTF)  
8. 3J-5389 [1] PLUG (EXTERNAL)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
14. 4N-0685 [6] BUSHING (1-IN WIDE)  
15. 3J-5390 [6] PLUG (3/8-18-THD)  
16. 2M-9780 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
 

Information:

Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2007/09/17
Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
2006/05/01
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Connecting Rod And Main Bearing Journals
3406 & 3406B GENERATOR SET ENGINE
Crankshaft (Earlier)
3406 & 3406B GENERATOR SET ENGINE
Crankshaft (Later)
3406 & 3406B GENERATOR SET ENGINE
Front Stub Shafts
3400 GENERATOR SET ENGINE ATTACHMENTS
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3406B DIESEL ENGINE FOR GENERATOR SETS
Crankshaft
3406B DIESEL ENGINE FOR GENERATOR SETS
Crankshaft Front Seal And Wear Sleeve
3406B DIESEL ENGINE FOR GENERATOR SETS
Crankshaft Rear Seal And Wear Sleeve
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3406B :

CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
110-9505 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
7W-8531 COVER GP-FLYWHEEL HOUSING
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.