AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-4697 CYLINDER BLOCK GP S/N 2WB18362-UP FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL 3406B


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406C Generator Set 2WB11476-UP SEBP2753 3406B 2WB   (1983)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4697 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
 

#SEBP27530070
 

7E-4697: CYLINDER BLOCK GP

7E-4697 CYLINDER BLOCK GP
S/N 2WB18362-UP
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL
i01538366 SEBP2753
7E4697 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5928 [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 304-8008 [1] PLUG AS  
  6V-9027 [1] SEAL-O-RING  
  9S-8002 [1] PLUG (7/16-20-THD)  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
19. 353-5125 B [2] PLUG AS  
    (EACH INCLUDES)
  6V-3251 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
20. 7X-7732 [6] PLUG-PIPE  
21. 151-5925 [6] BOLT (7/16-14-THD)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 202-1258 CY [1] CYLINDER BLOCK GP  
26. 353-5141 [1] PLUG AS  
  9S-8009 [1] PLUG-O-RING  
  291-8145 [1] SEAL-O-RING  
27. 2M-6471 [2] PLUG-CUP  
   
  101-0523 ABF INSERT-LINER SEAT (5.21-MM THK)  
  101-0524 ABF INSERT-LINER SEAT (5.16-MM THK)(0.5-MM US)  
  101-0525 ABF INSERT-LINER SEAT (5.26-MM THK)(0.5-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530071
 

8N-9267: CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 2WB11476-14024
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
i00147398 SEBP2753
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7M-7410 B [1] PLUG-PIPE  
4. 2W-6000 [6] LINER-CYLINDER BLOCK  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [1] PLUG-CUP  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
19. 2M-9780 [1] SEAL-O-RING  
20. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
21. 7E-6479 [6] BOLT-SPECIAL (OIL JET)  
22. 4N-0685 [6] BUSHING (1-IN WIDE)  
23. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 9S-8009 [1] PLUG-O-RING  
26. 4K-1388 [1] SEAL-O-RING  
27. 110-2220 [18] SEAL-LINER  
28. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
29. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
30. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
31. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
32. 4W-4588 AH SLEEVE-LIFTER BORE  
  4W-6061 AJ SLEEVE  
33. 9S-4190 B [1] PLUG-O-RING (7/8-14-THD)  
34. 2M-9780 B [1] SEAL-O-RING  
35. 100-7399 [1] PLUG  
36. 3E-6747 [1] SEAL-O-RING  
   
  5N-0093 AFH INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 ABFH INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABFH INSERT-LINER SEAT (2.76-MM THK)  
  2W-3815 AFH INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 ABFH INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABFH INSERT-LINER SEAT (1.655-MM THK)  
  9Y-3368 AFH INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 ABFH INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABFH INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  H   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK. QUANTITY TO BE DETERMINED BY USER.
  J   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE. QUANTITY TO BE DETERMINED BY USER.
 

#SEBP27530072
 

8N-9267: CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 2WB14025-17810
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
i00122479 SEBP2753
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 108-3913 [1] CYLINDER BLOCK AS  
3A. 197-9322 [6] LINER-CYLINDER BLOCK  
3B. 110-2220 [6] SEAL-LINER  
3C. 142-7072 [6] SEAL-LINER  
3D. 142-6217 [6] SEAL-O-RING (140.20MM ID)  
3E. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
3F. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
3G. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
3H. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 1S-9540 [2] DOWEL  
6. 3S-5496 [2] SEAL-O-RING  
7. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
8. 119-5155 [1] SEAL-O-RING  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 4N-0683 [4] DOWEL  
13. 4N-1650 [2] DOWEL  
14. 6I-2981 [1] PLATE-BLOCK  
15. 6I-4024 [1] GASKET-PLATE  
16. 8S-9094 [1] PLUG-ORIFICE  
17. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
18. 114-4427 [1] SEAL-O-RING  
19. 7X-7732 [6] PLUG-PIPE  
20. 111-8606 [6] BOLT-SPECIAL (OIL JET)  
21. 4N-0685 [6] BUSHING (1-IN WIDE)  
22. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
23. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
24. 9S-8009 [1] PLUG-O-RING  
25. 100-7399 [2] PLUG  
26. 3E-6747 [2] SEAL-O-RING  
27. 9S-4182 [1] PLUG (7/16-20-THD)  
28. 9X-7378 [1] SEAL-O-RING  
29. 7W-6534 B [1] PLUG-PIPE  
30. 4W-4588 AHB SLEEVE-LIFTER BORE  
   
  4W-6061 ABFJ SLEEVE  
  5N-0093 AFHB INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 ABFH INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABFH INSERT-LINER SEAT (2.76-MM THK)  
  2W-3815 AFHB INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 ABFH INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABFH INSERT-LINER SEAT (1.655-MM THK)  
  9Y-3368 AFHB INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 ABFH INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABFH INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  H   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK.
  J   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE.
 

#SEBP27530073
 

8N-9267: CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 2WB17811-18352
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
i00729769 SEBP2753
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5929 C [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 B [1] PLUG-PIPE  
4. 2W-6000 [6] LINER-CYLINDER BLOCK  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 9X-7378 [1] SEAL-O-RING  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
19. 114-4427 [1] SEAL-O-RING  
20. 7X-7732 [6] PLUG-PIPE  
21. 151-5925 C [6] BOLT (7/16-14-THD)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 9S-8009 [1] PLUG-O-RING  
26. 119-5155 [1] SEAL-O-RING  
27. 110-2220 [18] SEAL-LINER  
28. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
29. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
30. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
31. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
32. 4W-4588 ABH SLEEVE-LIFTER BORE  
33. 9S-4190 B [1] PLUG-O-RING (7/8-14-THD)  
34. 114-4427 B [1] SEAL-O-RING  
35. 100-7399 [2] PLUG  
36. 3E-6747 [2] SEAL-O-RING  
37. 9S-4182 [1] PLUG (7/16-20-THD)  
   
  4W-6061 ABFJ SLEEVE  
  5N-0093 ABFH INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 ABFH INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABFH INSERT-LINER SEAT (2.76-MM THK)  
  2W-3815 ABFH INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 ABFH INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABFH INSERT-LINER SEAT (1.655-MM THK)  
  9Y-3368 ABFH INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 ABFH INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABFH INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  H   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK.
  J   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE.
 

#SEBP27530074
 

8N-9267: CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 2WB18353-18377
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
i01608437 SEBP2753
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5929 [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 202-1258 CY [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 1S-9540 [2] DOWEL  
6. 3S-5496 [2] SEAL-O-RING  
7. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
8. 119-5155 [1] SEAL-O-RING  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 4N-0683 [4] DOWEL  
13. 4N-1650 [2] DOWEL  
14. 6I-2981 [1] PLATE-BLOCK  
15. 6I-4024 [1] GASKET-PLATE  
16. 8S-9094 [1] PLUG-ORIFICE  
17. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)(STRAIGHT THREAD O-RING)  
18. 114-4427 [1] SEAL-O-RING  
19. 7X-7732 [6] PLUG-PIPE  
20. 151-5925 [6] BOLT (7/16-14-THD)  
21. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
22. 9S-8009 [1] PLUG-O-RING (STRAIGHT THREAD O-RING)  
23. 100-7399 [2] PLUG  
24. 250-0466 [2] SEAL-O-RING  
25. 9S-4182 [1] PLUG (7/16-20-THD)(STRAIGHT THREAD O-RING)  
26. 9X-7378 [1] SEAL-O-RING  
27. 7W-6534 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530075
 

8N-9267: CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 2WB18353-UP
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
i02520161 SEBP2753
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-6567 C [6] TUBE AS-OIL JET  
2. 8T-6757 [3] PLUG-PIPE  
3. 202-1258 Y [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 1S-9540 [2] DOWEL  
6. 3S-5496 [2] SEAL-O-RING  
7. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
8. 119-5155 [1] SEAL-O-RING  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 4N-0683 [4] DOWEL  
13. 4N-1650 [2] DOWEL  
14. 6I-2981 [1] PLATE-BLOCK  
15. 6I-4024 [1] GASKET-PLATE  
16. 8S-9094 [1] PLUG-ORIFICE  
17. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)(STRAIGHT THREAD O-RING)  
18. 114-4427 [1] SEAL-O-RING  
19. 7X-7732 [6] PLUG-PIPE  
20. 151-5925 [6] BOLT (7/16-14-THD)  
21. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
22. 9S-8009 [1] PLUG-O-RING (STRAIGHT THREAD O-RING)  
23. 100-7399 [2] PLUG  
24. 250-0466 [2] SEAL-O-RING  
25. 9S-4182 [1] PLUG (7/16-20-THD)(STRAIGHT THREAD O-RING)  
26. 9X-7378 [1] SEAL-O-RING  
27. 7W-6534 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530076
 

7W-0007: CYLINDER HEAD AS

7W-0007 CYLINDER HEAD AS
S/N 2WB11476-UP
PART OF 7W-0009 CYLINDER HEAD AS, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-0009@@@@@
i00147303 SEBP2753
7W0007 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [12] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
6. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP27530077
 

7W-0009: CYLINDER HEAD AS

7W-0009 CYLINDER HEAD AS
S/N 2WB11476-UP
Type 1
FIELD REPLACEMENT FOR @@@@@ 7W-0007@@@@@
i00147304 SEBP2753
7W0009 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0007 Y [1] CYLINDER HEAD AS  
2. 4N-2803 [24] GUIDE-VALVE  
3. 2N-5775 [12] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530078
 

7W-0009: CYLINDER HEAD AS

7W-0009 CYLINDER HEAD AS
S/N 2WB11476-UP
Type 2
FIELD REPLACEMENT FOR @@@@@ 7W-0007@@@@@
i00158248 SEBP2753
7W0009 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3775 CY [1] CYLINDER HEAD AS  
2. 4N-2803 [24] GUIDE-VALVE  
3. 2N-5775 [12] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27530079
 

9Y-3775: CYLINDER HEAD AS

9Y-3775 CYLINDER HEAD AS
S/N 2WB11476-UP
PART OF 7W-0009 CYLINDER HEAD AS, 7W-2203 CYLINDER HEAD GP
i00158354 SEBP2753
9Y3775 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [12] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
New Connecting Rod And Main Bearings Used
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/16
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/12/01
New Cylinder Liner Available
1986/02/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Mid-Life Bearing Maintenance Recommendations
1987/09/01
New Piston Cooling Jets Used
1987/09/01
New Liner Seat Insert Available
1988/12/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
Procedure To Retain Oil Pump When The Cylinder Block Pump Mounting Pad Is Broken
1991/05/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/09/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
2010/09/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Liner Flange Breakage
Liner Flange Breakage
Specifications
Camshaft Bearings
3406 & 3406B GENERATOR SET ENGINE
Cylinder Block
3406 & 3406B GENERATOR SET ENGINE
Cylinder Liners
3406 & 3406B GENERATOR SET ENGINE
Cylinder Liner Projection
3406 & 3406B GENERATOR SET ENGINE
Connecting Rod And Main Bearing Journals
3406 & 3406B GENERATOR SET ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Spacer Plate
3406B DIESEL ENGINE FOR GENERATOR SETS
Piston Cooling Tubes
3406B DIESEL ENGINE FOR GENERATOR SETS
Camshaft Bearings
3406B DIESEL ENGINE FOR GENERATOR SETS
Crankshaft Main Bearings
3406B DIESEL ENGINE FOR GENERATOR SETS
Cylinder Liners
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
New Piston Cooling Jets Used {1213,1214}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04

Caterpillar Parts SIS Catalog 3406B :

CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.