AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-7325 GOVERNOR GP S/N 2WB17812-UP PART OF 110-8896 PUMP GP-GOV & FUEL INJ 3406B GEN SET ENGINE


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION
FUEL SYSTEM GP

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406C Generator Set 2WB11476-UP SEBP2753 3406B 2WB   (1983)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
1W-1183 GOVERNOR GP
GOVERNOR GP
1W-1183 GOVERNOR GP
GOVERNOR GP
2W-7325 GOVERNOR GP
GOVERNOR GP
2W-8576 GOVERNOR GP
GOVERNOR GP
4P-8242 GOVERNOR GP
GOVERNOR GP
6I-1101 GOVERNOR GP
 

#SEBP27530460
 

2W-7325: GOVERNOR GP

2W-7325 GOVERNOR GP
S/N 2WB17812-UP
PART OF 110-8896 PUMP GP-GOV & FUEL INJ
i00158181 SEBP2753
2W7325 GOVERNOR GP Parts scheme 2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3256 [1] COLLAR-LOAD STOP  
2. 8L-5832 [2] NUT-HEX (10-32-THD)  
3. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 C [1] BOLT AS-SPECIAL (STOP)  
  7W-5835 [1] COLLAR  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
10. 9S-8003 [1] PLUG (1/2-20-THD)  
11. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
12. 6V-5029 [1] SEAL-LIP TYPE  
13. 1N-3935 [1] COVER (IDLE-SPEED ADJ)  
14. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
15. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
16. 3P-0009 [1] INSULATOR  
17. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
18. 8N-3762 [1] COVER  
19. 7W-1749 [1] COVER AS  
  8S-6814 [2] PIN  
19A. 138-9507 [1] SEAL-LIP TYPE  
20. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
21. 4W-5735 [1] LEVER AS-PIVOT  
21A. 115-1249 [1] SETSCREW-SOCKET  
21B. 8L-5832 [1] NUT-HEX (10-32-THD)  
  4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
22. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
23. 2W-7400 C [1] SPRING  
24. 7N-1052 [1] DOWEL  
25. 7N-2176 [1] PIN-DETENT  
26. 4N-5621 [1] SHAFT-SHUTOFF  
27. 144-0480 [1] GASKET  
28. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
29. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
30. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
31. 8N-3760 [1] COVER  
32. 7W-4247 C [1] HOUSING AS-GOVERNOR  
32A. 8N-2499 [1] SPRING-GUIDE  
32B. 3D-8317 [1] RING-RETAINING  
32C. 4N-0260 [1] SEAL-LIP TYPE  
33. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
34. 8S-7803 [1] RING-RETAINING  
35. 2W-0801 [1] SHAFT  
36. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
  4N-5485 [1] BODY-VALVE  
36A. 6H-9691 [1] SEAL-O-RING  
36B. 5F-9144 [1] SEAL-O-RING  
36C. 4N-5484 [1] VALVE-NEEDLE  
37. 1J-9671 [1] SEAL-O-RING  
38. 1W-5341 [1] LEVER-SHUTOFF  
39. 2M-7819 [3] RING-RETAINING  
40. 7N-7270 [2] SLEEVE-SPRING  
41. 2W-2216 [1] SPRING-LINK  
42. 1N-3800 [1] SLEEVE-RACK CONTROL  
43. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
44. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  5P-9757 [1] SEAL-O-RING  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
  7C-0790 [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
45. 2W-0799 [1] SPRING-SHUTOFF  
46. 2W-0800 [1] LEVER-SHUTOFF  
47. 1N-3802 [1] SEAT-SPRING  
48. 1S-5440 [4] DOWEL  
49. 7M-7219 [1] BEARING-THRUST  
50. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
51. 4N-9019 [1] DOWEL  
52. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
53. 4N-2953 [1] RING-LOCK  
54. 133-8890 [2] RACE-NEEDLE BEARING  
55. 7E-3986 C [1] CARRIER-WEIGHT  
56. 119-8699 [4] WEIGHT-GOVERNOR  
57. 4N-0432 [1] BALL BEARING  
58. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
59. 4W-6868 C [1] RISER-GOVERNOR  
60. 3K-5733 [1] SPRING  
61. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  7N-7268 [1] SEAT-SPRING  
  4N-6410 [1] SPRING-DASHPOT  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
62. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
63. 6N-3504 [1] SEAT-GOVERNOR SPRING  
64. 7N-8821 [2] RING-RETAINING  
65. 1W-5339 [1] SHAFT AS-GOVERNOR  
66. 7W-1321 C [1] PLATE-THROTTLE (UPPER)  
67. 2W-9305 C [1] PLATE-THROTTLE (LOWER)  
68. 2W-6102 [1] LEVER-SPRING SEAT  
69. 5H-2532 [1] KEY-WOODRUFF  
70. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
71. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
72. 6V-8137 C [2] SCREW-BUTTON HEAD (10-24X1-IN)  
73. 7W-2000 C [1] STOP-DETENT  
74. 7W-1318 C [1] PLATE-RETAINING  
75. 2N-0828 [2] WASHER (SPRING)  
76. 5B-3180 [1] NUT (5/16-18-THD)  
77. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
78. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
79. 144-0478 [1] GASKET  
80. 8N-3761 [1] GASKET  
81. 8C-8564 [4] SCREW-LOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27530461
 

2W-8576: GOVERNOR GP

2W-8576 GOVERNOR GP
S/N 2WB11476-UP
PART OF 2W-8543, 2W-9103, 4P-0667, 7C-2192, 7E-0257, 7W-0066, 7W-0067 PUMP GP-GOV & FUEL INJ
i00540131 SEBP2753
2W8576 GOVERNOR GP Parts scheme 2W8576 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 C [1] LEVER AS-PIVOT  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
  4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
2. 2W-2216 [1] SPRING-LINK  
3. 1N-3800 [1] SLEEVE-RACK CONTROL  
4. 2M-7819 [3] RING-RETAINING  
5. 1N-3802 [1] SEAT-SPRING  
6. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  7C-0790 [1] CYLINDER AS  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
  5P-9757 [1] SEAL-O-RING  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
7. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
8. 7M-7219 [1] BEARING-THRUST  
9. 4N-2953 [1] RING-LOCK  
10. 133-8890 [2] RACE-NEEDLE BEARING  
11. 4W-6868 C [1] RISER-GOVERNOR  
12. 8N-9680 [1] HOUSING AS-GOVERNOR  
  4F-6024 [2] PIN  
  8S-6814 [4] PIN  
13. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
14. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  7N-7268 [1] SEAT-SPRING  
  4N-6408 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
15. 4N-0432 [1] BALL BEARING  
16. 6N-3504 [1] SEAT-GOVERNOR SPRING  
17. 7N-7270 [2] SLEEVE-SPRING  
18. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 119-8699 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 4N-9019 [1] DOWEL  
23. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
24. 1S-5440 [4] DOWEL  
25. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
26. 8L-5832 [2] NUT-HEX (10-32-THD)  
27. 1W-4243 [1] SPRING-BUMPER  
28. 8N-3256 [1] COLLAR-LOAD STOP  
29. 7W-5836 C [1] BOLT AS-SPECIAL (STOP)  
  7W-5835 [1] COLLAR  
30. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
31. 6D-3897 [1] BOLT (8-32X0.5-IN)  
32. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
33. 7N-8821 [2] RING-RETAINING  
34. 3K-5733 [1] SPRING  
35. 2W-6102 [1] LEVER-SPRING SEAT  
36. 2W-8638 [1] SPACER (18X25X1-MM THK)  
37. 2W-8645 [1] SHAFT  
38. 5H-2532 [1] KEY-WOODRUFF  
39. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
40. 2W-0801 [1] SHAFT  
41. 8S-7803 [1] RING-RETAINING  
42. 2W-0799 [1] SPRING-SHUTOFF  
43. 2W-0800 [1] LEVER-SHUTOFF  
44. 4N-5621 [1] SHAFT-SHUTOFF  
45. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
46. 1J-9671 [1] SEAL-O-RING  
47. 9S-8003 [1] PLUG (1/2-20-THD)  
48. 8C-8564 [4] SCREW-LOCK  
49. 8N-3760 [1] COVER  
50. 8N-3761 [1] GASKET  
51. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
52. 1N-3935 [1] COVER  
53. 5B-3180 C [1] NUT (5/16-18-THD)  
54. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
55. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
56. 1W-5342 [1] LEVER-SHUTOFF  
57. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
58. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
59. 144-0478 [1] GASKET  
60. 9A-7377 [1] VALVE AS-NEEDLE  
  4N-5484 [1] VALVE-NEEDLE  
  5N-5485 [1] RISER-BUS  
  5F-9144 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
61. 8N-3762 [1] COVER  
62. 7W-4247 [1] HOUSING AS-GOVERNOR  
  3D-8317 [1] RING-RETAINING  
  4N-0260 [1] SEAL-LIP TYPE  
  8J-8343 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  8N-2499 [1] SPRING-GUIDE  
63. 3P-0009 [1] INSULATOR  
64. 371-6684 [1] SETSCREW (5/16-18X2-IN)  
65. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
66. 144-0480 [1] GASKET  
67. 6V-5029 [1] SEAL-LIP TYPE  
68. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
69. 7W-1749 C [1] COVER AS  
  8S-6814 [2] PIN  
  138-9507 [1] SEAL-LIP TYPE  
70. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
71. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
72. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27530462
 

4P-8242: GOVERNOR GP

4P-8242 GOVERNOR GP
S/N 2WB11476-12249
PART OF 1W-1183 GOVERNOR GP
i00371357 SEBP2753
4P8242 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3891 [2] WASHER  
2. 5N-3887 [1] PIN  
3. 6N-7530 [1] PIN-PIVOT  
4. 1W-4892 [1] LEVER AS  
5. 6L-4007 [1] VALVE AS-RELIEF  
6. 6F-3480 [1] SLEEVE AS-ADJUSTMENT  
7. 2N-1894 [1] PIN-SPRING  
8. 5N-3915 [1] LINK AS  
9. 5N-3890 [1] SHAFT-SPEED ADJUSTMENT  
10. 5N-3885 [1] LINK-SPEED DROOP  
11. 5N-4111 [1] SPACER (0.192X0.249X0.137-IN THK)  
12. 5N-4112 [1] SPRING-TORSION  
13. 5N-3892 [1] BRACKET  
14. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
15. 5N-3913 [1] LEVER  
16. 5N-3911 [1] SHAFT AS-DROOP  
17. 5N-3916 [1] SLEEVE AS-ADJUSTMENT  
18. 1N-3316 [3] SEAL-OIL  
19. 4B-2043 [1] NUT (8-32-THD)  
20. 5N-3883 [1] SCREW-DROOP ADJUSTMENT  
21. 6L-9838 [2] SHAFT-TERMINAL  
22. 3N-5723 [1] SPRING  
23. 3N-5729 [1] SEAT-SPRING  
24. 3B-4502 [1] LOCKWASHER  
25. 3N-5728 [1] STRUT-SERVO  
26. 3N-5727 [1] PISTON-POWER  
27. 5N-3889 [1] VALVE-NEEDLE  
  5N-3908 [1] PLUG  
28. 5N-3912 [1] CASE AS  
29. 6L-3997 [1] PISTON-BUFFER  
30. 7L-3107 [1] BASE AS-GOVERNOR  
31. 6L-3995 [1] SEAT-SPRING  
32. 6L-3983 [1] GEAR-IDLER (10-TEETH)  
33. 6L-3994 [1] PLUNGER-VALVE  
34. 6L-3992 [1] BUSHING-TERMINAL  
35. 7N-0001 [1] BALL HEAD AS  
36. 7N-4533 [1] BEARING-THRUST  
37. 6L-3996 [1] SEAT-SPRING  
38. 7N-6052 [1] SPRING AS-SPEED  
39. 5N-3886 [1] SCREW (10-32X1.5-IN)  
40. 2F-2293 [1] GASKET-COVER  
41. 4P-8388 [1] CLUTCH AS  
42. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
43. 2W-1844 [1] COVER  
44. 6L-4003 [1] BUSHING  
45. 8N-3977 [2] SPRING-BUFFER  
46. 3K-6168 [1] BOLT-SOCKET HEAD (10-32X0.625-IN)  
47. 4W-5123 [1] MOTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
48. 9N-6225 [4] SCREW (6-32X47.625-MM)  
  9B-1117 [4] LOCKWASHER  
49. 9Y-1220 [2] PLUG  
50. 2W-0224 [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  7N-6807 [1] KIT-HARDWARE (GOVERNOR)  
 

#SEBP27530463
 

6I-1101: GOVERNOR GP

6I-1101 GOVERNOR GP
S/N 2WB12250-UP
PART OF 1W-1183 GOVERNOR GP
i00391817 SEBP2753
6I1101 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0984 [1] KIT-RELIEF VALVE (GOVERNOR)  
    (INCLUDES SLEEVE, PLUNGER, SPRING, SLEEVE SPRING & PLUG)
2. 4P-8388 [1] CLUTCH AS  
3. 4P-9624 [1] KIT-COVER REPAIR (GOVERNOR)  
    (INCLUDES COVER, SCREWS, NUTS & WASHERS)
4. 6I-1178 [1] KIT-DROOP SHAFT (GOVERNOR)  
    (INCLUDES SHAFT, LEVER, BRACKET, JAM NUT, WASHER & SCREWS)
5. 4P-9622 [1] KIT-REPAIR (GOVERNOR)  
    (INCLUDES TERMINAL SHAFTS, TERMINAL SHAFT BUSHINGS, PIVOT PIN & LOCKING NUT)
6. 4W-5123 [1] MOTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
7. 4P-9623 [1] KIT-PLUG REPAIR (GOVERNOR)  
    (INCLUDES PLUGS & NEEDLE VALVE)
8. 4P-9625 [1] KIT-GOVERNOR CONTROL STOP  
    (INCLUDES JAM NUT, WASHER & SCREW)
9. 4P-9627 [1] KIT-GOVERNOR VALVE  
    (INCLUDES IDLER GEAR, GEAR POST, GUIDE BUSHING, VALVE PLUNGER, PLUNGER NUT & PILOT VALVE BUSHING)
10. 6I-1103 [1] SPRING AS  
11. 7N-0001 [1] BALL HEAD AS  
12. 4P-9626 [1] KIT-GOVERNOR LINKAGE  
    (INCLUDES FLOATING LEVER, SPACER, PIN, SPRING, LOCKING NUT & BLOCKS)
13. 4P-9629 [1] KIT-GOVERNOR PISTON  
    (INCLUDES POWER PISTON & BUFFER PISTON)
14. 6I-1140 [1] KIT-BUFFER SPRING (GOVERNOR)  
    (INCLUDES SEAT & SPRINGS)
   
    AVAILABLE REPAIR KIT(S):
  4P-9621 [1] KIT-GOVERNOR REPAIR  
    (INCLUDES GASKET, PIN, SEALS, WASHER, PLUGS, RINGS, BEARING & RACE)
 

#SEBP27530464
 

4W-8180: GOVERNOR GP-ELECTRONIC

4W-8180 GOVERNOR GP-ELECTRONIC
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380400 SEBP2753
4W8180 GOVERNOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-5453 [1] CONTROL AS-ELECTRONIC GOVERNOR  
2. 4W-5971 [1] POTENTIOMETER (100-OHM)(ENGINE SPEED CONTROL)  
3. 4W-5972 [1] KNOB (ENGINE SPEED CONTROL)  
4. 7T-0037 [1] FUSE (0.75-AMPERE)  
5. 4W-8790 [1] BLOCK-FUSE  
 

#SEBP27530465
 

4W-8185: GOVERNOR GP-ELECTRONIC

4W-8185 GOVERNOR GP-ELECTRONIC
S/N 5GA4300-UP; 5HA5700-UP; 6BA4380-UP
WITH PREREGULATOR
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380405 SEBP2753
4W8185 GOVERNOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-5453 [1] CONTROL AS-ELECTRONIC GOVERNOR  
2. 4W-5391 [1] BOX AS-GOVERNOR PREREGULATOR  
  7T-0037 [3] FUSE (0.75-AMPERE)  
3. 4W-5971 [1] POTENTIOMETER (100-OHM)(ENGINE SPEED CONTROL)  
4. 4W-5972 [1] KNOB (ENGINE SPEED CONTROL)  
 

#SEBP27530466
 

1W-1204: HOUSING AS-GOVERNOR DRIVE

1W-1204 HOUSING AS-GOVERNOR DRIVE
S/N 2WB11476-UP
PART OF 1W-1205 DRIVE GP-GOVERNOR
i00355468 SEBP2753
1W1204 HOUSING AS-GOVERNOR DRIVE Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-4975 [1] BUSHING  
2. 9L-7657 [1] PLUG-CUP  
3. 5P-0796 [2] SEAL-LIP TYPE  
4. 1F-4622 [4] BEARING AS-NEEDLE  
5. 8S-6814 [2] PIN  
6. 5H-5744 [2] BUSHING-TERMINAL  
 

#SEBP27530467
 

4W-7018: INJECTOR GP-FUEL

4W-7018 INJECTOR GP-FUEL
S/N 2WB11476-UP
PART OF 4P-9348, 4W-6055 KIT-ENGINE REPAIR, 4W-8293 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00107977 SEBP2753
4W7018 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
 

#SEBP27530468
 

433-7712: KIT-FUEL SYSTEM GASKET

433-7712 KIT-FUEL SYSTEM GASKET
S/N 2WB11476-UP
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REBUILD AND REINSTALL ENGINE MOUNTED FUEL SYSTEM COMPONENTS.. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
PART OF 434-4988 KIT-ENGINE OVERHAUL
FIELD REPLACEMENT FOR 222-8662 KIT-GASKET
ALSO FIELD INSTALLATION
i05358356 SEBP2753
4337712 KIT-FUEL SYSTEM GASKET Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1W-1186 [1] GASKET  
3. 6L-3528 [1] GASKET  
4. 7C-0307 [1] GASKET (REGULATOR HOUSING, OUTLET)  
5. 144-0482 [1] GASKET  
6. 2J-0157 [1] SEAL-O-RING  
7. 2N-3350 [1] SEAL-O-RING  
8. 3J-1907 [1] SEAL-O-RING  
9. 3J-7354 [3] SEAL-O-RING  
10. 4J-8997 [1] SEAL-O-RING  
11. 4M-8303 [2] SEAL-O-RING  
12. 5P-5846 [1] SEAL-O-RING  
13. 5P-7813 [2] SEAL-O-RING  
14. 6V-3319 [1] SEAL-O-RING  
15. 8J-4351 [2] SEAL-O-RING  
16. 464-0509 [6] SEAL-O-RING  
17. 214-7567 [1] SEAL-O-RING  
18. 238-5078 [1] SEAL-O-RING  
19. 203-3940 [6] SEAL-O-RING  
20. 131-3719 [6] SEAL-O-RING  
21. 214-7566 [1] SEAL-O-RING  
22. 214-7568 [9] SEAL-O-RING  
23. 8H-2778 [1] SEAL-RING  
24. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP27530469
 

437-8114: KIT-FUEL SYSTEM GASKET

437-8114 KIT-FUEL SYSTEM GASKET
S/N 2WB11476-UP
CLASSIC THIS KIT IS SERVICED ONLY AS A COMPLETE PACKAG
FIELD INSTALLATION
i06796241 SEBP2753
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
   
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Governor Actuator Now Installed With Shock Mounting
1988/08/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/02/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Improved EG-3P Actuator Assembly For 3406 Engines{1903}
1997/04/01
Improved Governor Raise/Lower Motor Used In Governor Control Groups{1264}
1998/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280}
Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
Service Letter-Australia
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-CFEL
Service Letter-CSARL
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
Service Letter-Americas
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
3306/3406 Correction of �Overspeed at Start-up� complaint on standby generator set engines
3306/3406 Correction of �Overspeed at Start-up� complaint on standby generator set engines
Specifications
Governor Linkage (Woodward PSG) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor (New Scroll Fuel System) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor and Fuel Pump Drive Group (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor Dashpot (3% Regulation) (3406)
3406 & 3406B GENERATOR SET ENGINE
Governor Linkage (Woodward PSG) (3406)
3406 & 3406B GENERATOR SET ENGINE
Governor and Fuel Pump Drive Gear (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Transfer Pump And Tachometer Drive (3406)
3406 & 3406B GENERATOR SET ENGINE
Woodward PSG Governor
3406 & 3406B GENERATOR SET ENGINE
Governor Controls
3400 GENERATOR SET ENGINE ATTACHMENTS
Governor Linkage - 3406<BR> (Woodward EG-3P)
3400 GENERATOR SET ENGINE ATTACHMENTS
Governor Linkage-3406B<BR> (Woodward EG-3P Actuator)
3400 GENERATOR SET ENGINE ATTACHMENTS
Governor Linkage - 3408 &amp; 3412<BR> (Woodward EG-3P)
3400 GENERATOR SET ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Installation And Operation
2301A SPEED CONTROL
Service Letter-APD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pump Housing And Governor
3406B DIESEL ENGINE FOR GENERATOR SETS
Governor
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pumps
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Governor Actuator Now Installed With Shock Mounting{1286}
1988/08/22
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

GOVERNOR GP
1W-1183 GOVERNOR GP
GOVERNOR GP
1W-1183 GOVERNOR GP
GOVERNOR AS-ELECTRONIC
7E-1233 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4W-9313 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4P-2788 GOVERNOR AS-ELECTRONIC
FILTER GP-WATER SEP & FUEL
349-5174 FILTER GP-WATER SEP & FUEL
GOVERNOR GP
2W-8576 GOVERNOR GP
GOVERNOR GP
4P-8242 GOVERNOR GP
GOVERNOR GP
6I-1101 GOVERNOR GP
GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
HOUSING AS-GOVERNOR DRIVE
1W-1204 HOUSING AS-GOVERNOR DRIVE
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
KIT-FUEL SYSTEM GASKET
433-7712 KIT-FUEL SYSTEM GASKET

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.