AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-4812 LINES GP-FLEXIBLE FUEL S/N 2WB11476-UP AN ATTACHMENT 3406B GEN SET ENGINE


FUEL SYSTEM
LINES GP-FUEL
FILTER GP-FUEL
LINES GP-FUEL INJECTION

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406C Generator Set 2WB11476-UP SEBP2753 3406B 2WB   (1983)

FUEL SYSTEM

LINES GP-FUEL
DRAIN GP-FUEL
4W-0423 DRAIN GP-FUEL
DRAIN GP-FUEL
7E-3039 DRAIN GP-FUEL
FILTER & LINES GP-FUEL
5R-5020 FILTER & LINES GP-FUEL
9Y-4812 LINES GP-FLEXIBLE FUEL
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
2W-3457 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
2W-7595 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
7W-3935 LINES GP-FUEL RATIO CONTROL
NOZZLE AS-FUEL VALVE
4W-7017 NOZZLE AS-FUEL VALVE
VALVE GP-RELIEF
5R-3809 VALVE GP-RELIEF
 

#SEBP27530470
 

9Y-4812: LINES GP-FLEXIBLE FUEL

9Y-4812 LINES GP-FLEXIBLE FUEL
S/N 2WB11476-UP
AN ATTACHMENT
i00442530 SEBP2753
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2L-3331 B [1] CONNECTOR-PIPE (30 DEG NPSM EXT PIPE)  
  3N-6667 I [1] HOSE AS  
  8L-7979 I [1] HOSE AS  
  9J-6190 B [2] UNION-ADAPTER (37 DEG FLARED)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP27530471
 

2W-3452: LINES GP-FUEL FILTER

2W-3452 LINES GP-FUEL FILTER
S/N 2WB11476-UP
i00358712 SEBP2753
2W3452 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 364-9216 [1] ELBOW AS  
  7C-6459 [1] ELBOW-FLARED  
  214-7568 [1] SEAL-O-RING  
2. 2W-2927 [1] TUBE AS  
3. 2W-6458 [1] TUBE AS  
4. 3S-7189 C [1] BRACKET  
5. 0L-1351 C [1] BOLT (3/8-16X0.875-IN)  
6. 0S-1617 C [1] BOLT (5/16-18X0.75-IN)  
7. 191-7805 C [3] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
9. 307-2671 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
10. 313-9614 C [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
11. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
12. 3E-4352 C [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
13. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
14. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
15. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 5M-5926 C [2] CLAMP  
17. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 5P-8783 [2] STUD (3/8-24X1.67-IN)  
19. 5P-9297 C [1] CLIP (LOOP)  
20. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
21. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
22. 9X-6458 C [2] WASHER-HARD (10.2X22.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27530472
 

2W-3457: LINES GP-FUEL FILTER

2W-3457 LINES GP-FUEL FILTER
S/N 2WB11476-UP
FOR USE WITH @@@@@ 8H-7204@@@@@
AN ATTACHMENT
i00358714 SEBP2753
2W3457 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-8037 C [1] ELBOW  
2. 2W-3458 [1] PLATE  
3. 0S-1594 [4] BOLT (3/8-16X1-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 5N-2368 CI [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP27530473
 

2W-7595: LINES GP-FUEL FILTER

2W-7595 LINES GP-FUEL FILTER
S/N 2WB11476-UP
FOR USAGE REFER TO CHART @@@@@ 3N-8700@@@@@
AN ATTACHMENT
i00360397 SEBP2753
2W7595 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7293 [1] PLATE  
2. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 1D-4717 [2] NUT (3/8-16-THD)  
5. 2W-7289 [1] TUBE AS  
6. 3J-1907 [1] SEAL-O-RING  
7. 2W-7290 [1] TUBE AS  
8. 030-7947 [1] ADAPTER-ELBOW  
 

#SEBP27530474
 

124-2397: LINES GP-FUEL INJECTION

124-2397 LINES GP-FUEL INJECTION
S/N 2WB16536-16614
PART OF 4W-8293 LINES GP-FUEL INJECTION
i00516401 SEBP2753
1242397 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] LINE AS-FUEL INJ  
2. Z [1] LINE AS-FUEL INJ  
3. 1W-9168 [6] CLAMP-FUEL LINE (NON-THREADED)  
4. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
5. 5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
6. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
  4B-2047 [2] NUT (10-24-THD)  
7. 7M-9831 [2] SCREW-MACHINE (10-24X0.88-IN)  
  Z   NOT SERVICED SEPARATELY
 

#SEBP27530475
 

124-2398: LINES GP-FUEL INJECTION

124-2398 LINES GP-FUEL INJECTION
S/N 2WB16536-16614
PART OF 4W-8293 LINES GP-FUEL INJECTION
i00516405 SEBP2753
1242398 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] LINE AS-FUEL INJ  
2. Z [1] LINE AS-FUEL INJ  
3. 1W-9169 [3] CLAMP-FUEL LINE (THREADED)  
  5P-4939 [3] SCREW-MACHINE (10-24X15.88-IN)  
4. 1W-9168 [5] CLAMP-FUEL LINE (NON-THREADED)  
5. 7M-9831 [1] SCREW-MACHINE (10-24X0.88-IN)  
  6V-7699 [2] WASHER-HARD (5.5X13X1.6-MM THK)  
6. 4B-2047 [1] NUT (10-24-THD)  
  Z   NOT SERVICED SEPARATELY
 

#SEBP27530476
 

124-2399: LINES GP-FUEL INJECTION

124-2399 LINES GP-FUEL INJECTION
S/N 2WB16536-16614
PART OF 4W-8293 LINES GP-FUEL INJECTION
i00516412 SEBP2753
1242399 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] LINE AS-FUEL INJ  
2. Z [1] LINE AS-FUEL INJ  
3. 1W-9168 [6] CLAMP-FUEL LINE (NON-THREADED)  
4. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
5. 5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
6. 7M-9831 [3] SCREW-MACHINE (10-24X0.88-IN)  
  4B-2047 [3] NUT (10-24-THD)  
  6V-7699 [6] WASHER-HARD (5.5X13X1.6-MM THK)  
7. 1W-9167 [2] CLAMP AS-FUEL LINE  
  Z   NOT SERVICED SEPARATELY
 

#SEBP27530477
 

154-3244: LINES GP-FUEL INJECTION

154-3244 LINES GP-FUEL INJECTION
S/N 2WB11476-UP
DOUBLE WALLED
PART OF 1W-3138 LINES GP-FUEL INJECTION
AN ATTACHMENT
i01035663 SEBP2753
1543244 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4303 [1] LINE AS-FUEL INJECTION  
2. 7C-4304 [1] LINE AS-FUEL INJECTION  
3. 9N-3388 [2] BOLT (10-24X0.75-IN)  
4. 2W-7263 [2] CLAMP-FUEL LINE (TAPPED)  
5. 2W-7264 [2] CLAMP-FUEL LINE  
 

#SEBP27530478
 

154-3245: LINES GP-FUEL INJECTION

154-3245 LINES GP-FUEL INJECTION
S/N 2WB11476-UP
DOUBLE WALLED
PART OF 1W-3138 LINES GP-FUEL INJECTION
AN ATTACHMENT
i01037705 SEBP2753
1543245 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4305 [1] LINE AS-FUEL INJECTION  
2. 7C-4306 [1] LINE AS-FUEL INJECTION  
3. 9N-3388 [2] BOLT (10-24X0.75-IN)  
4. 2W-7263 [2] CLAMP-FUEL LINE (TAPPED)  
5. 2W-7264 [2] CLAMP-FUEL LINE  
 

#SEBP27530479
 

1W-3138: LINES GP-FUEL INJECTION

1W-3138 LINES GP-FUEL INJECTION
S/N 2WB11476-UP
FOR USE WITH DOUBLE WALLED FUEL LINES DRAIN GP
AN ATTACHMENT
i00356204 SEBP2753
1W3138 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4307 Y [1] LINES GP-FUEL INJECTION  
2. 154-3244 CY [1] LINES GP-FUEL INJECTION  
3. 2W-7263 C [3] CLAMP-FUEL LINE (TAPPED)  
  2W-7264 C [3] CLAMP-FUEL LINE  
  9N-3388 C [3] BOLT (10-24X0.75-IN)  
4. 2W-7037 [6] ADAPTER AS  
5. 5P-9795 [6] SEAL  
6. 8M-4437 [6] SEAL-O-RING  
7. 9L-9814 [6] LOCKNUT  
8. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
9. 154-3245 CY [1] LINES GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Fuel Line Assemblies And Adapter Assembly Used
1992/02/01
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.
1992/02/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/11/01
New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/16
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Special Instruction
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Nozzle And Adapter (Earlier) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Nozzle And Adapter (Later) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Lines (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Lines<BR> (Double Walled)
3400 GENERATOR SET ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Lines
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Filter And Base
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Line Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Nozzles And Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3406B :

437-8114 KIT-FUEL SYSTEM GASKET
KIT-FUEL SYSTEM GASKET
433-7712 KIT-FUEL SYSTEM GASKET
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
HOUSING AS-GOVERNOR DRIVE
1W-1204 HOUSING AS-GOVERNOR DRIVE
GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
GOVERNOR GP
6I-1101 GOVERNOR GP
GOVERNOR GP
4P-8242 GOVERNOR GP
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
2W-3457 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
2W-7595 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
124-2397 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
124-2398 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
124-2399 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
154-3244 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
154-3245 LINES GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.