7C-3229 GENERATOR AR S/N 5DD625-UP 60 HERTZ, 240-480 VOLT 3406B GEN SET ENGINE

Part No	Qty	Parts name
7W-4367 Y	[1]	GENERATOR GP
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANEL)
		-INSTALL INSIDE OF CONTROL PANEL.
118-8452	[1]	FILM-INFORMATION (GENERATOR)(GENERATOR)
		-INSTALL ON LH SIDE OF GENERATOR BARREL
		OR ON FRONT PANEL TOWARD LH SIDE OF
		PACKAGE.
		-APPLY CLEAR LAMINATE 122-9525 OVER
		INSTALLED GENERATOR FILM.
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		-INSTALL NEAR GENERATOR GROUND BOLT
		OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		-INSTALL ONE ON RH & LH GENERATOR SIDE
		PANELS. LOCATED 4-5 IN. FROM REAR & TOP
		OF GENERATOR.
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		-INSTALL ON GENERATOR FRONT PANEL AS
		ON LH SIDE OF PACKAGE.
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		-INSTALL ON GENERATOR FRONT PANEL AS ON
		LH SIDE OF PACKAGE.
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)
		-INSTALL ON FRONT OF RH GENERATOR FOOT
		USING 2K3219 DRIVE SCREWS TO INSTALL.
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP27530961

7C-3230: GENERATOR AR

GENERATOR AR

7C-3230 GENERATOR AR
S/N 5DD625-UP
60 HERTZ,240-480 VOLT

i00404783 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
7W-4369 Y	[1]	GENERATOR GP
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANEL)
		-INSTALL INSIDE OF CONTROL PANEL.
118-8452	[1]	FILM-INFORMATION (GENERATOR)(GENERATOR)
		-INSTALL ON LH SIDE OF GENERATOR BARREL
		OR ON FRONT PANEL TOWARD LH SIDE OF
		PACKAGE.
		-APPLY CLEAR LAMINATE 122-9525 OVER
		INSTALLED GENERATOR FILM.
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		-INSTALL NEAR GENERATOR GROUND BOLT
		OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		-INSTALL ONE ON RH & LH GENERATOR SIDE
		PANELS. LOCATED 4-5 IN. FROM REAR & TOP
		OF GENERATOR.
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		-INSTALL ON GENERATOR FRONT PANEL AS
		ON LH SIDE OF PACKAGE.
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		-INSTALL ON GENERATOR FRONT PANEL AS ON
		LH SIDE OF PACKAGE.
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)
		-INSTALL ON FRONT OF RH GENERATOR FOOT
		USING 2K3219 DRIVE SCREWS TO INSTALL.
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP27530962

7C-3486: GENERATOR AR

GENERATOR AR

7C-3486 GENERATOR AR
S/N 2WD1775-UP
60 HERTZ, 240-480 VOLT

i00405124 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
5N-4125 Y	[1]	CONNECTION GP-GENERATOR LEADS
7C-3484 Y	[1]	GENERATOR GP
118-8452	[1]	FILM-INFORMATION (GENERATOR)(GENERATOR)
		-INSTALL ON LH SIDE OF GENERATOR BARREL
		OR ON FRONT PANEL TOWARD LH SIDE OF
		PACKAGE.
		-APPLY CLEAR LAMINATE 122-9525 OVER
		INSTALLED GENERATOR FILM.
7W-5893	[1]	FILM-INFORMATION (GENERATOR LIFTING)
		-INSTALL ON BARREL NEAR LIFTING HOLE ON GENERATOR
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		-INSTALL NEAR GENERATOR GROUND BOLT
		OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		-INSTALL ONE ON RH & LH GENERATOR SIDE
		PANELS. LOCATED 4-5 IN. FROM REAR & TOP
		OF GENERATOR.
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		-INSTALL ON GENERATOR FRONT PANEL AS
		ON LH SIDE OF PACKAGE.
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		-INSTALL ON GENERATOR FRONT PANEL AS ON
		LH SIDE OF PACKAGE.
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)
		-INSTALL ON FRONT OF RH GENERATOR FOOT
		USING 2K3219 DRIVE SCREWS TO INSTALL.
Y		SEPARATE ILLUSTRATION

#SEBP27530963

9Y-0425: GENERATOR AR

GENERATOR AR

9Y-0425 GENERATOR AR
S/N 8LF1-UP
60 HERTZ, 240-480 VOLT

i00436555 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
7W-0571 Y	[1]	CONNECTION GP-GENERATOR LEADS
		-OR-
5N-4125 Y	[1]	CONNECTION GP-GENERATOR LEADS
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANEL)
		INSTALL INSIDE OF CONTROL PANEL.
9Y-4336	[1]	FILM (CSA CONTROL PANEL APPROVAL)
		INSTALL INSIDE OF CONTROL PANEL.
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR
		GENERATOR GROUND CUSTOMER CONNECTION POINT.
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		INSTALL ONE ON RH & LH GENERATOR SIDE PANELS
		LOCATED 4-5 INCH FROM REAR & TOP OF GENERATOR
9Y-0367 Y	[1]	GENERATOR GP
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		INSTALL ON GENERATOR FRONT PANEL AS
		ON LH SIDE OF PACKAGE.
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		INSTALL ON GENERATOR FRONT PANEL AS ON
		LH SIDE OF PACKAGE.
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)(GENERATOR)
		INSTALL ON FRONT OF RH GENERATOR FOOT
		USING DRIVE SCREWS TO INSTALL.
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP27530964

9Y-0435: GENERATOR AR

GENERATOR AR

9Y-0435 GENERATOR AR
S/N 8KF1-UP
240-480 VOLT, 60 HERTZ

i00436571 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
5N-4123 Y	[1]	CONNECTION GP-GENERATOR LEADS
9Y-0377 Y	[1]	GENERATOR GP
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANAL)
		-INSTALL INSIDE OF CONTROL PANEL.
118-8452	[1]	FILM-INFORMATION (GENERATOR)(GENERATOR)
		-INSTALL ON LH SIDE OF GENERATOR BARREL
		OR ON FRONT PANEL TOWARD LH SIDE OF
		PACKAGE.
		-APPLY CLEAR LAMINATE 122-9525 OVER
		INSTALLED GENERATOR FILM.
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		-INSTALL NEAR GENERATOR GROUND BOLT
		OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		-INSTALL ONE ON RH & LH GENERATOR SIDE
		PANELS. LOCATED 4-5 IN. FROM REAR & TOP
		OF GENERATOR.
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		-INSTALL ON GENERATOR FRONT PANEL AS
		ON LH SIDE OF PACKAGE.
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		-INSTALL ON GENERATOR FRONT PANEL AS ON
		LH SIDE OF PACKAGE.
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)
		-INSTALL ON FRONT OF RH GENERATOR FOOT
		USING 2K3219 DRIVE SCREWS TO INSTALL.
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP27530965

9Y-0436: GENERATOR AR

GENERATOR AR

9Y-0436 GENERATOR AR
S/N 8LF1-UP
240-480 VOLT, 60 HERTZ

i00436572 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
5N-4125 Y	[1]	CONNECTION GP-GENERATOR LEADS
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANEL)
		INSTALL INSIDE OF CONTROL PANEL
9Y-4336	[1]	FILM (CSA CONTROL PANEL APPROVAL)
		INSTALL INSIDE OF CONTROL PANEL
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR CONNECTION POINT
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		INSTALL ONE ON RH AND LH GENERATOR SIDE PANELS LOCATED 4-5 INCHES FROM REAR & TOP OF GENERATOR
9Y-0378 Y	[1]	GENERATOR GP
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		INSTALL ON GENERATOR FRONT PANEL
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		INSTALL ON GENERATOR FRONT PANEL ASSEMBLY ON LH SIDE OF PACKAGE
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)(GENERATOR)
		INSTALL ON RH SIDE OF GENERATOR USING DRIVE SCREWS
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
		INSTALL GENERATOR SERIAL NUMBER PLATE
Y		SEPARATE ILLUSTRATION

#SEBP27530966

9Y-0437: GENERATOR AR

GENERATOR AR

9Y-0437 GENERATOR AR
S/N 9FF1-UP
60 HERTZ, 240-480 VOLT

i00436573 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
5N-4125 Y	[1]	CONNECTION GP-GENERATOR LEADS
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANEL)
		INSTALL INSIDE OF CONTROL PANEL
9Y-4336	[1]	FILM (CSA CONTROL PANEL APPROVAL)
		INSTALL INSIDE OF CONTROL PANEL
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		INSTALL ON RH & LH PANELS 4-5 INCHES FROM REAR & TOP OF GENERATOR
9Y-0379 Y	[1]	GENERATOR GP
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		INSTALL ON GENERATOR FRONT PANEL ASSEMBLY ON LH SIDE OF PACKAGE
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		INSTALL ON GENERATOR FRONT PANEL ASSEMBLY ON LH SIDE OF PACKAGE
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)(GENERATOR)
		INSTALL ON FRONT RH GENERATOR FOOT USING DRIVE SCREWS TO INSTALL
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
153-5927	[1]	TAG-INSTRUCTION (GENSET ALIGNMENT)
		INSTALL LH SIDE OF GENERATOR FOOT NEAR DRIVE END.
Y		SEPARATE ILLUSTRATION

#SEBP27530967

9Y-1443: GENERATOR AR

GENERATOR AR

9Y-1443 GENERATOR AR
S/N 9FF1-UP
60 HERTZ, 240-480 VOLT

i00438112 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Part No	Qty	Parts name
7W-0571 Y	[1]	CONNECTION GP-GENERATOR LEADS
		S/N 9FF1-247
5N-4125 Y	[1]	CONNECTION GP-GENERATOR LEADS
		S/N 9FF248-UP
9Y-4335	[1]	FILM (CSA CONTROL PANEL APPROVAL)(CSA CONTROL PANEL)
		INSTALL INSIDE OF CONTROL PANEL
9Y-4336	[1]	FILM (CSA CONTROL PANEL APPROVAL)
		INSTALL INSIDE OF CONTROL PANEL
4W-5138	[1]	FILM-INSTRUCTION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT
7W-4445	[2]	FILM-WARNING (DANGER VOLTAGE)
		INSTALL ON RH & LH PANELS 4-5 INCHES FROM REAR & TOP OF GENERATOR
9Y-1425 Y	[1]	GENERATOR GP
4P-6410	[1]	PLATE-INFORMATION (GENERATOR)
		INSTALL ON GENERATOR FRONT PANEL ASSEMBLY ON LH SIDE OF PACKAGE
7W-0096	[1]	PLATE-INFORMATION (GENERATOR INFORMATION)
		INSTALL ON GENERATOR FRONT PANEL ASSEMBLY ON LH SIDE OF PACKAGE
1W-7848	[1]	PLATE-SERIAL NUMBER (ENGLISH)(GENERATOR)
		INSTALL ON FRONT RH GENERATOR FOOT USING DRIVE SCREWS TO INSTALL
2K-3219	[2]	SCREW-DRIVE (NO 6X0.25-IN)
153-5927	[1]	TAG-INSTRUCTION (GENSET ALIGNMENT)
		INSTALL LH SIDE OF GENERATOR FOOT NEAR DRIVE END.
Y		SEPARATE ILLUSTRATION

#SEBP27530968

109-3776: GENERATOR GP

GENERATOR GP

109-3776 GENERATOR GP
S/N 8JF1-UP
60 HERTZ, 240/480 VOLTS
PART OF 109-3777 GENERATOR AR
Type 1

i00490322 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	4P-3154	[1]	HEAT SINK
2.	110-6174	[1]	PANEL-REAR
3.	4P-3153	[1]	SPACER (20.6X77X27.8-MM THK)
4.	1A-9579	[4]	BOLT (5/16-18X1.5-IN)
5.	4P-3152	[1]	ROTOR-EXCITER
6.	9Y-0916	[1]	RECTIFIER AS
7.	9Y-5816	[1]	STATOR-EXCITER
8.	3H-5932	[4]	BOLT (5/16-18X4.5-IN)
9.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
10.	6I-0088	[1]	COVER AS-EXCITER
11.	1B-2714	[4]	BOLT (1/4-20X2.5-IN)
12.	5P-0537	[19]	WASHER-HARD (7.2X14.5X2-MM THK)
13.	111-2413	[1]	FAN-GENERATOR
14.	110-6175	[1]	COVER AS-AIR (INLET)
15.	110-4325	[1]	BRACKET-BEARING
16.	9S-8750	[3]	NUT-FULL (1/4-20-THD)
17.	0S-1615	[8]	BOLT (1/4-20X0.75-IN)
18.	8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
19.	110-3410 Y	[1]	ROTOR AS
20.	7E-6577	[1]	COVER-RECTIFIER
21.	7C-5709	[3]	SLEEVE
22.	7C-5708	[3]	GROMMET
23.	033-2075	[6]	WASHER (0.266X1.25X0.06-IN THK)
24.	1N-7219	[1]	CHANNEL-RUBBER
25.	7E-6578	[2]	PANEL
26.	4W-9449	[1]	FILM-INFORMATION (GENERATOR WIRING DIAGRAM)
27.	7C-5711	[1]	FILM-INSTRUCTION (VOLTAGE CONTROL ADJUSTMENT)
28.	7E-6575	[1]	PANEL AS
	4F-8711	[2]	PLUG-BUTTON
	5N-3174	[8]	PLUG-BUTTON
	5N-3175	[1]	PLUG-BUTTON
	6K-9593	[1]	PLUG-BUTTON
29.	3V-5035	[1]	SPACER (0.302X0.54X1.03-IN THK)
30.	4P-3420	[1]	BRACKET (RH)
31.	7E-6568	[1]	FRAME AS (RH)
32.	4P-3419	[1]	BRACKET (LH)
33.	126-4421	[2]	SCREEN AS
34.	7E-6567	[1]	FRAME AS (LH)
35.	9F-7022	[1]	BOLT (1/4-20X1.5-IN)
36.	110-4875	[1]	STATOR AS (PERMANENT MAGNET)
	7E-8266	[2]	HOLDER AS-FUSE
	9Y-6027	[2]	FUSE-CERAMIC (10-AMPERE)
37.	5L-2087	[4]	SPACER (9.25X13.72X50.8-MM THK)
38.	4P-3150	[1]	COVER AS
	5N-3167	[2]	SEAL-RING
	5N-3176	[2]	PLUG-BUTTON
	6D-7128	[4]	SEAL-O-RING
	8P-7065	[2]	PLUG-BUTTON
	8T-9587	[2]	SEAL-O-RING
	030-2284	[4]	PLUG-BUTTON
39.	110-4874	[1]	ROTOR AS (PERMANENT MAGNET)
40.	6I-2737	[2]	RETAINER-BEARING
41.	8B-2377	[4]	BOLT (1/4-20X2-IN)
42.	112-9430	[1]	SPACER (63.6X101.6X69.2-MM THK)
43.	7E-6569	[1]	STATOR AS
44.	6I-0748	[3]	DEFLECTOR
45.	7E-6574	[1]	COVER-DRIP
46.	114-5510 Y	[1]	REGULATOR AS-VOLTAGE (VR3 PERMANENT MAGNET)

			AVAILABLE REPAIR KIT(S):
	4W-3901	[1]	KIT-ROTOR BALANCE WEIGHT (GENERATOR)(GENERATOR)
			(INCLUDES SCREWS, NUTS & WASHERS)
	9Y-5090	[1]	KIT-STATOR REWIND (GENERATOR)
			(INCLUDES TOPSTICKS, LINERS, LEADS, LUGS, SEPARATORS, SLEEVES, CONNECTORS, CORD, TAPE,
			VARISH, EPOXY RESIN & REGULATOR TERMINALS)
	7E-7233	[1]	KIT-GENERATOR HARDWARE
			(INCLUDES SCREWS, WASHERS, LOCKWASHERS, PLUGS, LUGS & NUTS)
	Y		SEPARATE ILLUSTRATION

#SEBP27530969

109-3776: GENERATOR GP

GENERATOR GP

109-3776 GENERATOR GP
S/N 8JF1-UP
60 HERTZ, 240/480 VOLTS
PART OF 109-3777 GENERATOR AR
Type 2

i02096339 SEBP2753

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	290-5567 Y	[1]	HEAT SINK AS
2.	110-6174	[1]	PANEL-REAR
3.	4P-3153	[1]	SPACER (20.6X77X27.8-MM THK)
4.	1A-9579	[4]	BOLT (5/16-18X1.5-IN)
5.	4P-3152	[1]	ROTOR-EXCITER
7.	9Y-5816	[1]	STATOR-EXCITER
8.	3H-5932	[4]	BOLT (5/16-18X4.5-IN)
9.	9M-1974	[8]	WASHER-HARD (8.8X16X2-MM THK)
10.	6I-0088	[1]	COVER AS-EXCITER
11.	1B-2714	[4]	BOLT (1/4-20X2.5-IN)
12.	5P-0537 C	[13]	WASHER-HARD (7.2X14.5X2-MM THK)
13.	111-2413	[1]	FAN-GENERATOR
14.	110-6175	[1]	COVER AS-AIR (INLET)
15.	110-4325	[1]	BRACKET-BEARING
17.	0S-1615	[8]	BOLT (1/4-20X0.75-IN)
18.	8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
19.	110-3410 Y	[1]	ROTOR AS
24.	1N-7219	[1]	CHANNEL-RUBBER
25.	7E-6578	[2]	PANEL
26.	4W-9449	[1]	FILM-INFORMATION (GENERATOR WIRING DIAGRAM)
28.	7E-6575	[1]	PANEL AS
	4F-8711	[2]	PLUG-BUTTON
	5N-3174	[8]	PLUG-BUTTON
	5N-3175	[1]	PLUG-BUTTON
	6K-9593	[1]	PLUG-BUTTON
29.	3V-5035	[1]	SPACER (0.302X0.54X1.03-IN THK)
30.	4P-3420	[1]	BRACKET (RH)
31.	7E-6568	[1]	FRAME AS (RH)
32.	4P-3419	[1]	BRACKET (LH)
33.	112-2563	[1]	SCREEN AS
34.	7E-6567	[1]	FRAME AS (LH)
35.	9F-7022	[1]	BOLT (1/4-20X1.5-IN)
36.	110-4875	[1]	STATOR AS (PERMANENT MAGNET)
	7E-8266	[2]	HOLDER AS-FUSE
	9Y-6027	[2]	FUSE-CERAMIC (10-AMPERE)
37.	5L-2087	[4]	SPACER (9.25X13.72X50.8-MM THK)
38.	4P-3150	[1]	COVER AS
	5N-3167	[2]	SEAL-RING
	5N-3176	[2]	PLUG-BUTTON
	6D-7128	[4]	SEAL-O-RING
	8P-7065	[2]	PLUG-BUTTON
	8T-9587	[2]	SEAL-O-RING
	030-2284	[4]	PLUG-BUTTON
39.	110-4874	[1]	ROTOR AS (PERMANENT MAGNET)
40.	6I-2737	[2]	RETAINER-BEARING
41.	8B-2377	[4]	BOLT (1/4-20X2-IN)
42.	112-9430	[1]	SPACER (63.6X101.6X69.2-MM THK)
43.	7E-6569	[1]	STATOR AS
44.	6I-0748	[3]	DEFLECTOR
45.	7E-6574	[1]	COVER-DRIP
47.	126-4421	[1]	SCREEN AS

			AVAILABLE REPAIR KIT(S):
	4W-3901	[1]	KIT-ROTOR BALANCE WEIGHT (GENERATOR)(GENERATOR)
			(INCLUDES SCREWS, NUTS & WASHERS)
	9Y-5090	[1]	KIT-STATOR REWIND (GENERATOR)
			(INCLUDES TOPSTICKS, LINERS, LEADS, LUGS, SEPARATORS, SLEEVES, CONNECTORS, CORD, TAPE,
			VARISH, EPOXY RESIN & REGULATOR TERMINALS)
	7E-7233	[1]	KIT-GENERATOR HARDWARE
			(INCLUDES SCREWS, WASHERS, LOCKWASHERS, PLUGS, LUGS & NUTS)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

Information:

GENERATORS

GENERATOR GP

General Service Information

Identification
CONTROL PANEL SR4 GENERATOR MOUNTED

Abbreviations
CONTROL PANEL SR4 GENERATOR MOUNTED

Symbols
CONTROL PANEL SR4 GENERATOR MOUNTED

How To Read Control Panel DC Schematics
CONTROL PANEL SR4 GENERATOR MOUNTED

Location Of Components
CONTROL PANEL SR4 GENERATOR MOUNTED

Standard Components
CONTROL PANEL SR4 GENERATOR MOUNTED

Optional Components
CONTROL PANEL SR4 GENERATOR MOUNTED

Energize To Run Engine System
CONTROL PANEL SR4 GENERATOR MOUNTED

Energize To Shut Off Engine System
CONTROL PANEL SR4 GENERATOR MOUNTED

Latching Fuel Solenoid System
CONTROL PANEL SR4 GENERATOR MOUNTED

Point To Point Wiring Diagrams
CONTROL PANEL SR4 GENERATOR MOUNTED

D.C. Schematic (JIC)
CONTROL PANEL SR4 GENERATOR MOUNTED

Wiring Diagram (Instrument Panel)
CONTROL PANEL SR4 GENERATOR MOUNTED

Wiring Diagram (Subpan Side One)
CONTROL PANEL SR4 GENERATOR MOUNTED

Wiring Diagram (Subpan Side Two)
CONTROL PANEL SR4 GENERATOR MOUNTED

Control Panel Wiring Harness
CONTROL PANEL SR4 GENERATOR MOUNTED

Customer/Contactor Wiring
CONTROL PANEL SR4 GENERATOR MOUNTED

Standby Generator Wiring Diagram
CONTROL PANEL SR4 GENERATOR MOUNTED

Identification
ELECTRONIC MODULAR CONTROL PANEL (SR-4 GENERATOR MOUNTED)

Location Of Components
ELECTRONIC MODULAR CONTROL PANEL (SR-4 GENERATOR MOUNTED)

Control Panel Operation
ELECTRONIC MODULAR CONTROL PANEL (SR-4 GENERATOR MOUNTED)

Optional Modules
ELECTRONIC MODULAR CONTROL PANEL (SR-4 GENERATOR MOUNTED)

Troubleshooting
ELECTRONIC MODULAR CONTROL PANEL (SR-4 GENERATOR MOUNTED)

Service Procedures
ELECTRONIC MODULAR CONTROL PANEL (SR-4 GENERATOR MOUNTED)

Identification
SR4 GENERATOR MOUNTED CONTROL PANEL

Abbreviations & Symbols
SR4 GENERATOR MOUNTED CONTROL PANEL

How To Read Control Panel DC Schematics
SR4 GENERATOR MOUNTED CONTROL PANEL

Components
SR4 GENERATOR MOUNTED CONTROL PANEL

Introduction
SR4 GENERATOR MOUNTED CONTROL PANEL

Automatic Start/Stop Control Panel
SR4 GENERATOR MOUNTED CONTROL PANEL

Manual Start/Stop Control Panel
SR4 GENERATOR MOUNTED CONTROL PANEL

Operation
FLOOR-STANDING SWITCHGEAR

Automatic Start-Stop
FLOOR-STANDING SWITCHGEAR

Alternating Current Components Troubleshooting
FLOOR-STANDING SWITCHGEAR

Automatic Start-Stop Troubleshooting
FLOOR-STANDING SWITCHGEAR

Engine News

Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators
1985/04/01

Meter Panel Cover Folds Down Completely
1985/11/01

Troubleshooting Solid State Suppressors
1986/04/01

Bearing Information For SR4 Generators
1986/09/01

Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switchgear
1987/01/01

Guidebook For Caterpillar Inspection And Maintenance Program For Standby Generator Sets
1987/02/01

Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01

Ground Wire Added To SR 4 Generators With 580, 680, And 800 Frames
1988/08/01

Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01

Procedure To Set Voltage Droop On SR 4 Generators With VR3 Voltage Regulators Using Resistive Load Bank
1991/05/01

Changes To EMCP I Control Panel{4450}
1996/11/01

Use 152-7143 Cable Assembly For Flash-Programming Generator Status Control Module{4450}
1999/02/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

Special Instruction

Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}

Replacement Of 5N1848, 5N1849 And 5N1850 A1 Module Regulator Assemblies{4467}
Replacement Of 5N1848, 5N1849 And 5N1850 A1 Module Regulator Assemblies{4467}

Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}

Installation of 4P1976 Base Group (3406) and/or 4P1980 Base Group (3306) for Marine Auxiliary Generator Sets{7060}
Installation of 4P1976 Base Group (3406) and/or 4P1980 Base Group (3306) for Marine Auxiliary Generator Sets{7060}

Installing Warning Films For 111-2413 Non-Metallic Generator Fans{7405}
Installing Warning Films For 111-2413 Non-Metallic Generator Fans{7405}

3406/3408/3412 Packaged Generator Set Wiring Diagram{1400}
3406/3408/3412 Packaged Generator Set Wiring Diagram{1400}

3406/3408/3412 Package Generator Sets With EMCP{1400}
3406/3408/3412 Package Generator Sets With EMCP{1400}

Installation Of 7W417 Enclosure Group For Package Generator Sets{7002}
Installation Of 7W417 Enclosure Group For Package Generator Sets{7002}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Alignment of Single-Bearing Generators {4471}
Alignment of Single-Bearing Generators {4471}

Replacement of the Generator Information Plate{7405}
Replacement of the Generator Information Plate{7405}

Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}

Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}

Generator Bearing Service {4457}
Generator Bearing Service {4457}

Service Letter-NACD

Product Support Program For Reworking The Customer Communication Module (CCM) On Certain Generator Sets And G3600 Industrial Engines
Product Support Program For Reworking The Customer Communication Module (CCM) On Certain Generator Sets And G3600 Industrial Engines

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Circuit Breakers Need To Be Inspected On Certain 3208, 3304, 3304B, G3306, 3306, 3306B, 3406, 3406C, 3408B, 3408C, 3412, Generator Sets
Circuit Breakers Need To Be Inspected On Certain 3208, 3304, 3304B, G3306, 3306, 3306B, 3406, 3406C, 3408B, 3408C, 3412, Generator Sets

Service Letter-Australia

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-CFEL

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-CSARL

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Americas

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Brazil

Technical Information Bulletin

Correct bolt torque when securing the generator flex plate coupling
Correct bolt torque when securing the generator flex plate coupling

Service Letter-China

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Service Letter-Asia

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Systems Operation

Systems Operation
ELECTRONIC MODULAR CONTROL PANEL (EMCP)

Systems Operation
SR4 GENERATOR

Generator Operation
SR4B Generators

General Information
SR4B Generators

Component Descriptions
SR4B Generators

Glossary
SR4B Generators

Main Revolving Field Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Options (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Main Revolving Field Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Options (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

General Information (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

General Information (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Generator Wiring Diagrams (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Main Stator and Voltage Sensing Lead Connections (All Except SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Main Stator and Voltage Sensing Lead Connections (SR4B for 3500 Engines)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Oil Field Generator Connections (SR4)
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options

Glossary
SR4 Generator with VR3 or VR4 Voltage Regulator

General Information
SR4 Generator with VR3 or VR4 Voltage Regulator

Component Descriptions
SR4 Generator with VR3 or VR4 Voltage Regulator

Generator Operation
SR4 Generator with VR3 or VR4 Voltage Regulator

Service Letter-APD

Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets

Testing and Adjusting

Testing And Adjusting
ELECTRONIC MODULAR CONTROL PANEL (EMCP)

Testing And Adjusting
SR4 GENERATOR

General Information
SR4B Generators

Troubleshooting
SR4B Generators

Generator Set - Test
SR4B Generators

Varistor - Test
SR4 Generator with VR3 or VR4 Voltage Regulator

Rotating Rectifier - Test
SR4B Generators

Winding - Test
SR4 Generator with VR3 or VR4 Voltage Regulator

Resistor - Test
SR4B Generators

Exciter Field - Flash
SR4 Generator with VR3 or VR4 Voltage Regulator

Generator - Dry
SR4 Generator with VR3 or VR4 Voltage Regulator

Insulation - Test
SR4 Generator with VR3 or VR4 Voltage Regulator

General Information
SR4 Generator with VR3 or VR4 Voltage Regulator

Troubleshooting
SR4 Generator with VR3 or VR4 Voltage Regulator

Rotating Rectifier - Test
SR4 Generator with VR3 or VR4 Voltage Regulator

Disassembly and Assembly

Engine And Generator
3406B DIESEL ENGINE FOR GENERATOR SETS

Control Panel
SR4 GENERATOR

Generator Bearing<BR> (Outside Bearing Type RFA)
SR4 GENERATOR

Generator Bearing (Inside Bearing Type RFA)
SR4 GENERATOR

Generator Removal
SR4 GENERATOR

Alignment Of Single-Bearing Generators<BR> (Typical)
SR4 GENERATOR

Rotor Assembly
SR4 GENERATOR

Stator Assembly
SR4 GENERATOR

Coupling - Install
SR4 Generator with VR3 or VR4 Voltage Regulator

Coupling - Remove
SR4B Generators

Bearing - Remove and Install
SR4B Generators

Rotor - Remove and Install
SR4B Generators

Generator - Align
SR4B Generators

Generator - Install
SR4B Generators

Generator - Remove
SR4B Generators

Exciter - Remove and Install
SR4B Generators

Bearing - Remove and Install
SR4 Generator with VR3 or VR4 Voltage Regulator

Exciter - Remove and Install
SR4 Generator with VR3 or VR4 Voltage Regulator

Generator - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator

Generator - Install
SR4 Generator with VR3 or VR4 Voltage Regulator

Generator - Align
SR4 Generator with VR3 or VR4 Voltage Regulator

Rotor - Remove and Install
SR4 Generator with VR3 or VR4 Voltage Regulator

Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator

Service Magazine

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

Several Types Of Automatic Voltage Regulators (AVR) Used In SR4 Generators{4450}
1985/04/08

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24

Troubleshooting Solid State Suppressors{4467,4466,4450}
1986/04/07

Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28

Bearing Information For SR4 Generators{4471}
1986/09/01

Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19

Guidebook For Caterpillar Inspection And Maintenance Program For Standby Generator Sets{0354,0370,0372}
1987/02/16

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11

Parts Information For VR3 Automatic Voltage Regulators{4467}
1987/11/09

Ground Wire Added To SR 4 Generators With 580, 680, And 800 Frames{4478}
1988/08/01

Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products{0354,0370,0374,0375,1022,4450}
1989/08/14

Special Instruction Available With Replacement Information For 7C2662, 7C2664 Or 7C3507 VR3 Voltage Regulators{4467}
1990/02/19

Procedure To Set Voltage Droop On SR 4 Generators With VR3 Voltage Regulators Using Resistive Load Bank{4475,4467}
1991/04/22

Procedure To Check 7C2700 Voltage Control Module{4450,4467}
1992/01/20

Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11

New Engine Control Module For EMCP Now Available{4450,4490}
1992/07/27

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Caterpillar Parts SIS Catalog 3406B :

109-3776 GENERATOR GP

Truck sale:

USD $25,000

1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California

USD $22,000

1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania

USD $35,000

1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas

USD $29,000

1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania

$29,000 USD

CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States

7C-3229 GENERATOR AR S/N 5DD625-UP 60 HERTZ, 240-480 VOLT 3406B GEN SET ENGINE

GENERATORS