AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

138-1989 HOUSING GP-FLYWHEEL S/N 7ZR1-UP PART OF 138-2001 ENGINE AR 345B L EXCAVATOR


BASIC ENGINE
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILD
BASIC ENGINE
HOUSING GP-FRONT

EXCAVATOR 345B L EXCAVATOR 2SW
 345B, 345B L & 345B LC Excavator 2SW00001-UP (MACHINE) POWERED BY 3176C Engine SEBP2754 345B L 2SW   (1998)

BASIC ENGINE

HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
138-1989 HOUSING GP-FLYWHEEL
 

#SEBP27540060
 

138-1989: HOUSING GP-FLYWHEEL

138-1989 HOUSING GP-FLYWHEEL
S/N 7ZR1-UP
PART OF 138-2001 ENGINE AR
i00827180 SEBP2754
1381989 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
2. 7C-1445 [1] COVER  
3. 138-1990 [1] HOUSING-FLYWHEEL  
4. 274-4556 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  8L-2786 [1] SEAL-O-RING  
5. 061-9455 [1] SEAL-O-RING  
6. 169-5861 [1] PLUG AS  
  3K-8460 [1] PLUG (1/2-20-THD)  
  5P-7814 [1] SEAL-O-RING  
7. 319-6234 [1] PLUG AS  
  9S-9334 [1] PLUG  
  238-5084 [1] SEAL-O-RING  
8. 5D-9344 [1] SEAL-O-RING  
9. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 6V-5219 M [2] BOLT (M8X1.25X40-MM)  
11. 6V-8197 M [12] BOLT (M12X1.75X40-MM)  
12. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP27540061
 

115-3006: HOUSING GP-FRONT

115-3006 HOUSING GP-FRONT
S/N 7ZR1-3740
PART OF 126-0052 ENGINE AR-CORE
i00827087 SEBP2754
1153006 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-0103 [1] HOUSING AS-FRONT  
1A. 2A-3348 [2] DOWEL  
1B. 6V-3535 [2] DOWEL  
  126-0102 [1] HOUSING AS-FRONT  
1C. 8T-0343 M [2] BOLT-SOCKET HEAD (M12X1.75X55-MM)  
  3H-7654 [2] WASHER-HARD (13.5X22.5X3-MM THK)  
1D. 2H-5549 [1] RING-RETAINING  
1E. 115-9424 [1] GEAR-PUMP DRIVE (34-TEETH)  
1F. 8H-9789 [2] BALL BEARING  
2. 6V-2317 M [13] BOLT (M8X1.25X30-MM)  
3. 9M-1974 [33] WASHER-HARD (8.8X16X2-MM THK)  
4. 130-0910 [1] COVER AS  
5. 126-2418 [1] SEAL  
6. 126-0098 [1] GASKET  
7. 126-0110 [1] SEAL GP-CRANKSHAFT  
8. 3H-0976 [1] SEAL-O-RING  
9. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 6V-8225 M [5] NUT (M6X1-THD)  
11. 6V-3940 M [19] BOLT (M8X1.25X25-MM)  
12. 3E-8016 M [1] BOLT-SELF-LOCKING (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP27540062
 

115-3006: HOUSING GP-FRONT

115-3006 HOUSING GP-FRONT
S/N 7ZR3036-25905
PART OF 126-0052 ENGINE AR-CORE
i01409839 SEBP2754
1153006 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-4296 [1] HOUSING AS-FRONT  
1A. 2A-3348 [2] DOWEL  
1B. 6V-3535 [2] DOWEL  
  126-0102 [1] HOUSING AS-FRONT  
1C. 8T-0343 M [2] BOLT-SOCKET HEAD (M12X1.75X55-MM)  
  3H-7654 [2] WASHER-HARD (13.5X22.5X3-MM THK)  
1D. 2H-5549 [1] RING-RETAINING  
1E. 115-9424 [1] GEAR-PUMP DRIVE (34-TEETH)  
1F. 8H-9789 [2] BALL BEARING  
2. 204-0712 M [13] BOLT (M8X1.25X30-MM)  
    -OR-
  6V-5219 M [13] BOLT (M8X1.25X40-MM)  
3. 9M-1974 [33] WASHER-HARD (8.8X16X2-MM THK)  
4. 262-7131 C [1] COVER GP-FRONT HOUSING  
5. 174-2475 C [1] SEAL-INTEGRAL  
6. 262-8382 [1] GASKET  
7. 226-4755 C [1] SEAL GP-CRANKSHAFT  
7A. 220-3373 [1] SEAL-RING  
8. 3E-8016 M [1] BOLT-SELF-LOCKING (M8X1.25X25-MM)  
9. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 6V-8225 M [5] NUT (M6X1-THD)  
11. 6V-3940 M [19] BOLT (M8X1.25X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP27540063
 

415-8632: KIT-CYLINDER HEAD

415-8632 KIT-CYLINDER HEAD
S/N BFG1-UP; 7KS1-UP; 2SW1-UP
THIS CYLINDER HEAD REBUILD KIT IS BEING DESIGNED FOR USE OF THE 3176C ENGINE FOR THE FOLLOWING E MODELS:. 345B, 814F, 815F, 816F, D7R, 140H, 14H, 160H, 163H, D7RII, 966GII, AND 572RII
FOR USE WITH @@@@@138-2001@@@@@
FIELD INSTALLATION
i05424159 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6I-1638 [12] BASE-INJECTOR POSITIONING  
  100-8150 [24] GUIDE-VALVE  
  138-2006 [12] INSERT-VALVE SEAT (INLET)  
  179-9453 [12] INSERT-VALVE SEAT (EXHAUST)  
  2A-4429 [48] LOCK-RETAINER  
  3B-0623 [8] PLUG-CUP (CYLINDER HEAD)  
  6V-7604 [16] PLUG-CUP (MARKED X)  
  6I-2663 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  6I-2662 [1] SHIELD  
  7C-8581 [1] ROTOCOIL AS  
  116-1102 [6] SLEEVE-INJECTOR  
  224-4441 [24] SPRING (VALVE)  
  332-2152 [24] SPRING-VALVE  
  133-7029 [12] VALVE-EXHAUST  
  7E-9578 [12] VALVE-INLET  
 

#SEBP27540064
 

417-4374: KIT-CYLINDER HEAD GASKET

417-4374 KIT-CYLINDER HEAD GASKET
S/N BFG1-UP; 7KS1-UP; 2SW1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 415-8666 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
i05192155 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-0451 [1] GASKET  
  1S-4295 [1] GASKET (TURBOCHARGER)  
  7E-5555 [1] GASKET  
  7E-7912 [1] GASKET  
  7W-5164 [3] GASKET  
  8H-9788 [1] GASKET  
  9Y-1758 [1] GASKET  
  101-3125 [1] GASKET (AIR INLET MANIFOLD)  
  109-5313 [6] GASKET  
  118-2797 [4] GASKET  
  188-6126 [1] GASKET  
  197-8418 [1] GASKET  
  197-8419 [1] GASKET (TURBOCHARGER)  
  187-3307 [1] GASKET AS-CYLINDER HEAD  
    (COMPATIBLE WITH CYLINDER HEADS WITH A STRAIGHT CASTING PROFILE ON THE LIFTER LEDGE.
    7ZR02671-UP, REFER TO REHS7793 TABLE 10 IN SISWEB.)
  109-5309 [1] GASKET-VALVE COVER  
  7C-8292 [8] ISOLATOR  
  9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
  5P-5678 SEAL (6-M)  
  361-8205 [6] SEAL  
  3S-9643 [2] SEAL-LIP TYPE  
  3J-1907 [4] SEAL-O-RING  
  3J-7354 [4] SEAL-O-RING  
  3K-0360 [6] SEAL-O-RING  
  228-4947 [2] SEAL-O-RING  
  4G-4972 [6] SEAL-O-RING  
  6V-3251 [1] SEAL-O-RING  
  136-7227 [1] SEAL-O-RING  
  6V-5048 [1] SEAL-O-RING  
  6V-5063 [1] SEAL-O-RING  
  6V-6609 [2] SEAL-O-RING  
  6V-8676 [1] SEAL-O-RING  
  7L-6580 [1] SEAL-O-RING  
  7L-9061 [1] SEAL-O-RING  
  8C-3089 [1] SEAL-O-RING  
  8L-2786 [5] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  114-2687 [1] SEAL-O-RING  
  214-7566 [2] SEAL-O-RING  
  214-7568 [4] SEAL-O-RING  
  9X-8281 M [4] STUD-TAPERLOCK (M10X1.5X45-MM)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

#SEBP27540065
 

415-1881: KIT-ENGINE OVERHAUL

415-1881 KIT-ENGINE OVERHAUL
S/N BFG1-UP; 7KS1-UP
(SILVER OVERHAUL KIT)
FOR USE WITH 3176C MACHINE ENGINE
FIELD INSTALLATION
i05192089 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  415-8666 Y [1] KIT-ENGINE OVERHAUL (BRONZE)  
   
  133-7098 [6] CROWN AS-PISTON  
   
  148-2125 [6] LINER-CYLINDER BLOCK  
  4P-1659 [6] RING-PISTON (OIL CONTROL)  
  109-5319 [6] RING-PISTON (INTERMEDIATE)  
  168-7212 [6] RING-PISTON (TOP)  
  437-1409 [6] SEAL-LINER  
  238-2710 [6] SKIRT-PISTON  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27540066
 

415-8666: KIT-ENGINE OVERHAUL

415-8666 KIT-ENGINE OVERHAUL
S/N BFG1-UP; 7KS1-UP; 2SW1-UP
(BRONZE OVERHAUL KIT). THIS KIT CONTAINS TWO CYLINDER HEAD GASKETS, 1-187-3306 & 187-3307 FOUND IN THE 417-4374 SINGLE CYLINDER HEAD KIT. 187-3306 IS COMPATIBLE WITH CYLINDER HEADS WITH A SCALLOPED CASTING PROFILE ON THE LIFTER LEDGE. 187-3307 IS COMPATIBLE WITH CYLINDER HEADS WITH A STRAIGHT CASTING PROFILE ON THE LIFTER LEDGE. REFER TO REHS7793 TABLE 10 FOR ADDITIONAL INFORMATION
PART OF 415-1881 KIT-ENGINE OVERHAUL
FOR USE WITH REHS7793, 3176C MACHINE ENGINE
FIELD INSTALLATION
i05192084 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  417-4374 Y [1] KIT-CYLINDER HEAD GASKET  
  417-4536 Y [1] KIT-FRONT COVER GASKET  
  224-5797 Y [6] KIT-GASKET (SINGLE FUEL INJECTOR)  
  315-6714 Y [1] KIT-GASKET (WATER PUMP)(WATER PUMP)  
  320-6200 Y [1] KIT-GASKET (TURBOCHARGER)  
  399-8241 Y [1] KIT-GASKET (REAR STRUCTURE)  
  417-3776 Y [1] KIT-GASKET (CENTRAL, LOWER)  
  415-8665 Y [1] KIT-OIL SYSTEM GASKET (OIL COOLER, LINES)  
   
  8H-9789 [2] BALL BEARING  
  374-8342 [1] BALL BEARING  
  217-0577 [6] BEARING-CONNECTING ROD (STANDARD)  
  175-0454 M [26] BOLT (M16X2X160-MM)  
  9Y-4357 [1] BREATHER AS (CRANKCASE)  
  216-5583 [5] BUSHING  
  216-5584 [1] BUSHING  
  216-5585 [1] BUSHING  
  6V-0852 [1] CAP-DUST  
  335-9214 [2] CLAMP-BAND  
  1R-1808 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
  131-4164 [1] GASKET  
  252-9685 [1] GASKET  
  187-3306 [1] GASKET AS-CYLINDER HEAD  
    (COMPATIBLE WITH CYLINDER HEADS WITH A SCALLOPED CASTING PROFILE ON THE LIFTER LEDGE.
    7ZR1-02670, REFER TO REHS7793 TABLE 10 IN SISWEB.)
  131-6645 [1] HOSE  
  3E-8017 M [8] LOCKNUT (M10X1.5-THD)  
  9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
  3B-0623 [3] PLUG-CUP  
  4F-5695 [6] PLUG-CUP  
  4W-4011 [2] REGULATOR-TEMPERATURE (89-DEG C)  
  6V-6923 [1] RING-BACKUP  
  126-0110 [1] SEAL GP-CRANKSHAFT  
  3H-0976 [1] SEAL-O-RING  
  3J-1907 [9] SEAL-O-RING  
  3P-0647 [2] SEAL-O-RING  
  4J-7533 [1] SEAL-O-RING  
  5P-3456 [6] SEAL-O-RING  
  6V-4367 [2] SEAL-O-RING  
  6V-4589 [1] SEAL-O-RING  
  7L-9061 [1] SEAL-O-RING  
  8T-5452 [1] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  214-7568 [4] SEAL-O-RING  
  238-5080 [1] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  220-3373 [1] SEAL-RING  
  4P-4369 [12] SPACER (12X19X23.5-MM THK)  
  288-3803 [2] SPRING AS  
    (EACH INCLUDES)
  4N-8150 [1] SPRING  
  116-3715 M [12] STUD-TAPERLOCK (M10X1.5X85-MM)  
  6V-5839 [12] WASHER (11X21X2.5-MM THK)  
  092-2570 [2] WASHER-SEALING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27540067
 

230-2162: KIT-FRONT COVER GASKET

230-2162 KIT-FRONT COVER GASKET
S/N 7KS1-UP
FRONT STRUCTURE
FIELD REPLACEMENT ORDER @@@@@417-4316@@@@@
FOR USE WITH 7ZR1-3740, 6AR1-1881, FOR MACHINE PREFIX 6HS, 6KS, 7ZR1-3740 FOR MACHINE PREFIX AGS, 7ZR1-3740 FOR MACHINE PREFIX AKJ, AKX, AMA, CDJ, ALD, ALL, ALT, CCC, AMD, AMN, AYR, 7ZR1-3741 FOR MACHINE PREFIX 9GS, 4SS, 2NW, 7ZR1-3740 FOR MACHINE PREFIX 6XS, 4SS, 7KS
FIELD INSTALLATION
i05261477 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6D-1004 [2] GASKET  
  133-7068 [1] GASKET-CAMSHAFT COVER  
  216-4781 [1] KIT-GASKET  
  204-0712 M [13] BOLT (M8X1.25X30-MM)  
  204-0714 [13] BOLT  
  211-2822 [1] GASKET  
  126-0110 [1] SEAL GP-CRANKSHAFT  
  129-2181 [1] SEAL-INTEGRAL  
  174-2475 [1] SEAL-INTEGRAL  
  6V-9748 [1] SEAL-LIP TYPE  
  1H-7339 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  6V-3834 [1] SEAL-O-RING  
  6V-7350 [1] SEAL-O-RING  
  8L-2786 [1] SEAL-O-RING  
  9F-4446 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  220-3373 [1] SEAL-RING  
  4K-9841 [1] WASHER (0.406X0.75X0.064-IN THK)  
  5R-7137 [4] WASHER-SEALING  
  092-2570 [2] WASHER-SEALING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

#SEBP27540068
 

417-4316: KIT-FRONT COVER GASKET

417-4316 KIT-FRONT COVER GASKET
S/N BFG1-UP; 7KS1-UP; 2SW1-UP
CONTAINS GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD REPLACEMENT FOR @@@@@230-2162@@@@@
FOR USE WITH @@@@@138-2001@@@@@, 7ZR1-3743 FOR MACHINE PREFIX 4SS, 9GS, 2NW, 7ZR1-3741 FOR MACHINE PREFIX 4SS, 9GS, 2NW, 7ZR1-3740 FOR MACHINE PREFIX 4SS, 9GS, 2NW
FIELD INSTALLATION
i05262168 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6D-1004 [2] GASKET  
  252-9685 [1] GASKET  
  216-4781 [1] KIT-GASKET  
  204-0712 M [13] BOLT (M8X1.25X30-MM)  
  204-0714 [13] BOLT  
  262-8382 [1] GASKET  
  126-0110 [1] SEAL GP-CRANKSHAFT  
  129-2181 [1] SEAL-INTEGRAL  
  174-2475 [1] SEAL-INTEGRAL  
  6V-9748 [1] SEAL-LIP TYPE  
  1H-7339 [1] SEAL-O-RING  
  3H-0976 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  6V-3834 [1] SEAL-O-RING  
  6V-7350 [1] SEAL-O-RING  
  8L-2786 [3] SEAL-O-RING  
  9F-4446 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  220-3373 [1] SEAL-RING  
  5R-7137 [2] WASHER-SEALING  
  092-2570 [2] WASHER-SEALING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

#SEBP27540069
 

417-4536: KIT-FRONT COVER GASKET

417-4536 KIT-FRONT COVER GASKET
S/N BFG1-UP; 7KS1-UP; 2SW1-UP
CONTAINS GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET.
PART OF 415-8666 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
i05192157 SEBP2754
  For full view, you need register

Parts for your 345B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6D-1004 [2] GASKET  
  252-9685 [1] GASKET  
  216-4781 [1] KIT-GASKET  
  204-0712 M [13] BOLT (M8X1.25X30-MM)  
    -OR-
  204-0714 [13] BOLT  
    (REFERENCE REHS1189 IN SISWEB TO DETERMINE CORRECT BOLT USAGE)
  262-8382 [1] GASKET  
  226-4755 [1] SEAL GP-CRANKSHAFT (FRONT)  
  129-2181 [1] SEAL-INTEGRAL  
  174-2475 [1] SEAL-INTEGRAL  
  6V-9748 [1] SEAL-LIP TYPE  
  1H-7339 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  6V-3834 [1] SEAL-O-RING  
  6V-7350 [1] SEAL-O-RING  
  8L-2786 [3] SEAL-O-RING  
  9F-4446 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  5R-7137 [2] WASHER-SEALING  
  092-2570 [2] WASHER-SEALING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

Information:

Specifications
Flywheel Housing
3176C and 3196 Engines for Caterpillar Built Machines
Flywheel Housing
3176C and 3196 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 345B L :

GEAR GP-FRONT
117-2750 GEAR GP-FRONT
FLYWHEEL GP
116-5386 FLYWHEEL GP
FLYWHEEL GP
116-5386 FLYWHEEL GP
FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
FASTENER GP-DAMPER & PULLEY
117-2771 FASTENER GP-DAMPER & PULLEY
FASTENER GP-CYLINDER HEAD
116-1083 FASTENER GP-CYLINDER HEAD
DRIVE GP-FAN
137-3750 DRIVE GP-FAN
DRIVE GP-FAN
137-3750 DRIVE GP-FAN
HOUSING GP-FRONT
115-3006 HOUSING GP-FRONT
HOUSING GP-FRONT
115-3006 HOUSING GP-FRONT
415-8632 KIT-CYLINDER HEAD
417-4374 KIT-CYLINDER HEAD GASKET
415-1881 KIT-ENGINE OVERHAUL
415-8666 KIT-ENGINE OVERHAUL
230-2162 KIT-FRONT COVER GASKET
417-4316 KIT-FRONT COVER GASKET

Truck sale:

Caterpillar 345BL, Construction
46,900 
Caterpillar 345BL, Construction
- Crawler Excavators
MICHIGAN CAT
CATERPILLAR 345BL 1999
 
CATERPILLAR 345BL 1999
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 345BL 1998
 
CATERPILLAR 345BL 1998
- TRACK EXCAVATORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
 
 
CATERPILLAR 345BL 2000
- TRACK EXCAVATORS
MADISA - MAQUINAS DIESEL S.A. DE C.V.
- SANTA CATARINA, N.L. - - 66350
CATERPILLAR 345BL 2004
 
CATERPILLAR 345BL 2004
- TRACK EXCAVATORS
NMC CAT
11002 Sapp Bros. Dr. - Omaha - Nebrask
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.