136-7334 TIRE & RIM AR S/N 1JW1-UP 854G WHEEL DOZER

Pos.	Part No	Qty	Parts name
1.	8L-2786	[1]	SEAL-O-RING
2.	9S-4185	[1]	PLUG (3/4-16-THD)
3.	5P-3723	[6]	CONE-BEARING
4.	6D-7690	[6]	CUP-BEARING
5.	6T-1740	[1]	ORIFICE
6.	6V-0852	[1]	CAP-DUST
7.	7X-7816	[1]	PLATE-SERIAL NUMBER
8.	8J-6815	[3]	PLUG-ORIFICE
9.	109-0169	[1]	HOUSING AS-TORQUE CONVERTER
	1F-1006	[2]	DOWEL
	4B-9784	[5]	BALL
10.	109-8980	[1]	ADAPTER-PUMP
11.	109-9940	[2]	ADAPTER-PUMP
12.	110-0045	[1]	ADAPTER-PUMP
13.	110-0288	[1]	ADAPTER-SPLINE
14.	110-0289	[1]	ADAPTER-SPLINE
15.	110-2136	[1]	GEAR-IDLER (66-TEETH)
16.	110-2137	[2]	GEAR-PUMP DRIVE (66-TEETH)
17.	111-4486 B	[3]	SHIM PACK (INCLUDES 10-SHIMS)
18.	155-5296 CY	[1]	TORQUE CONVERTER GP-LOCKUP
19.	323-4071	[1]	MANIFOLD
20.	277-8995	[3]	SEAL-LIP TYPE
21.	135-9941	[1]	ADAPTER
22.	2M-3340	[4]	SEAL-O-RING
23.	3D-2824	[1]	SEAL-O-RING
24.	3J-1907	[4]	SEAL-O-RING
25.	3J-7354	[1]	SEAL-O-RING
26.	3P-1155	[1]	SEAL-O-RING
27.	5F-3999	[1]	SEAL-O-RING
28.	5P-8211	[2]	SEAL-O-RING
29.	5P-9035	[1]	SEAL-O-RING
30.	6V-2406	[1]	SEAL-O-RING
31.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
32.	7L-9061	[5]	SEAL-O-RING
33.	7M-8485	[2]	SEAL-O-RING
34.	7T-4083	[1]	RING
35.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
36.	7X-2495	[2]	RING-RETAINING
37.	7X-2553 M	[2]	BOLT (M16X2X40-MM)
38.	7X-2563 M	[11]	BOLT (M20X2.5X60-MM)
39.	8T-4123	[11]	WASHER (22X35X3.5-MM THK)
40.	8T-4193 M	[21]	BOLT (M16X2X50-MM)
41.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
42.	9H-6832	[1]	SEAL-O-RING
43.	9S-4181	[2]	PLUG (1-5/16-12-THD)
44.	9S-4191	[3]	PLUG (9/16-18-THD)
45.	9X-8257	[23]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP27640538

1C-7954: TORQUE CONVERTER AR-LOCKUP

TORQUE CONVERTER AR-LOCKUP

1C-7954 TORQUE CONVERTER AR-LOCKUP
S/N 1JW1-244
PART OF 144-5300 COMMON AR

i00767580 SEBP2764

For full view, you need register

Parts for your 854G WHEEL DOZER:

CATERPILLAR SIS

Part No	Qty	Parts name
132-3612 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)(TC LOCKUP)
133-9886 Y	[1]	TORQUE CONVERTER & HOUSING GP
112-4811 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH (TORQUE CONVERTER)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP27640539

155-5296: TORQUE CONVERTER GP-LOCKUP

TORQUE CONVERTER GP-LOCKUP

155-5296 TORQUE CONVERTER GP-LOCKUP
S/N 4PT1-244
PART OF 133-9886 TORQUE CONVERTER & HOUSING GP

i00730377 SEBP2764

1555296 TORQUE CONVERTER GP-LOCKUP Parts scheme

For full view, you need register

Parts for your 854G WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	110-2144	[1]	HOUSING-CLUTCH
2.	0S-0509	[12]	BOLT (3/8-16X0.75-IN)
3.	1T-1244	[4]	WASHER (SPLIT)
4.	1T-1898	[1]	PLATE-BACKING
5.	1T-1897	[1]	PLATE-CLUTCH
6.	336-9318	[2]	DISC-FRICTION
7.	8E-4295	[1]	PISTON-CLUTCH
8.	3S-0142	[1]	RING-SEAL
9.	110-8849	[1]	HUB AS
9A.	1T-1253	[1]	BUSHING
	4L-3395	[4]	DOWEL
10.	3S-1282	[1]	RING-SEAL
11.	141-0408	[1]	PILOT-FLYWHEEL
12.	3L-1824	[1]	BALL BEARING
13.	1T-1248	[1]	SLEEVE-WEAR
14.	128-1663	[2]	RING-SEAL
15.	9X-8873	[3]	BOLT (1/2-13X2.25-IN)
16.	141-0409	[1]	PLATE-RETAINER
17.	141-0410	[1]	WASHER-SPRING (76X127X10.5-MM THK)
18.	1T-1365	[1]	CARRIER-RING
19.	188-2595	[1]	RING-SNAP
20.	0S-1595	[12]	BOLT (1/2-13X1.25-IN)
21.	3D-4603	[1]	PLUG-PIPE
22.	1T-1646	[2]	PLATE
23.	5P-4055	[1]	BEARING-THRUST
24.	3P-9497	[1]	PLUG-ORIFICE (7/16-27-THD)
25.	9S-4185	[2]	PLUG (3/4-16-THD)
26.	8L-2786	[2]	SEAL-O-RING
27.	8P-5696	[1]	TURBINE-CONVERTER
28.	4K-5175	[20]	BOLT-12 POINT HEAD (1/2-13X1.5-IN)
29.	111-1275	[1]	PLATE-CLAMP
30.	1T-1232	[2]	RING-RETAINING
31.	133-9926	[1]	STATOR-CONVERTER
32.	1T-1566	[1]	BEARING-THRUST
33.	109-3482	[1]	IMPELLER-CONVERTER
34.	110-8850	[1]	HUB-IMPELLER
35.	471-8511	[1]	PLATE-CLUTCH BACKING
36.	155-6189	[1]	HOUSING AS
	155-5716	[2]	DOWEL
37.	6Y-7198	[2]	PLATE-CLUTCH
38.	336-9315	[3]	DISC-FRICTION
39.	123-5255	[1]	PISTON-CLUTCH
40.	9X-8876	[30]	BOLT (1/2-13X4.75-IN)
41.	5P-8245	[42]	WASHER-HARD (13.5X25.5X3-MM THK)
42.	155-5293	[1]	ADAPTER AS-CLUTCH
42A.	110-8839	[1]	BUSHING
	155-5716	[4]	DOWEL
	3B-2225	[2]	DOWEL
43.	9S-9739	[12]	BOLT (1/2-13X2.7-IN)
44.	155-5715	[2]	PLATE-THRUST
45.	6Y-8167	[1]	WASHER-THRUST (217X280X4.5-MM THK)
46.	110-2135	[1]	GEAR-DRIVE (71-TEETH)
47.	110-8852	[3]	RING-SEAL
48.	141-8387	[1]	CARRIER-RING
49.	2H-2255	[1]	DOWEL
50.	124-6348	[1]	RACE-ROLLER
51.	110-2138	[1]	GEAR-DRIVE (69-TEETH)
52.	5P-6408	[1]	BEARING-INNER
53.	141-8205	[1]	CARRIER-SUPPORT
54.	110-2142	[1]	RETAINER-BEARING
55.	9B-7237	[11]	BOLT (3/8-16X1.25-IN)
56.	4M-5227	[1]	BALL BEARING
57.	6Y-6370	[2]	RING-SEAL
58.	1T-1821	[1]	CARRIER-RING
59.	223-9743	[1]	SEAL-LIP TYPE
60.	110-2141	[1]	YOKE
61.	7X-0349	[1]	BOLT (5/8-11X3-IN)
62.	3P-1669	[1]	RETAINER (SHAFT)
63.	5H-2824	[1]	SEAL-O-RING
64.	110-2140	[1]	ROTOR-SENSOR
65.	7L-3385	[1]	SEAL-O-RING
66.	9S-8008	[1]	PLUG (1-1/16-12-THD)
67.	1T-1925	[1]	GASKET (FLAT)
68.	1T-1209	[1]	CARRIER-RING (SEAL)
69.	110-2133	[1]	SHAFT-OUTPUT
70.	9X-8883	[12]	BOLT (5/8-11X2.75-IN)
71.	113-5945	[2]	RING-SEAL
72.	7S-6892	[1]	RING-SEAL
73.	122-9978	[1]	RING-SEAL
74.	1T-1235	[1]	CAM-FREEWHEEL
75.	141-5950	[1]	CAGE-ROLLER
76.	1T-1257	[2]	SPRING
77.	1T-1754	[22]	ROLLER-FREEWHEEL
78.	1T-1855	[1]	RACE-FREEWHEEL
79.	0S-1618	[6]	BOLT (5/16-18X1-IN)
80.	1T-1254	[2]	WASHER (SPLIT)
81.	1T-2044	[4]	PIN-THRUST RACE
82.	1T-2043	[1]	RACE-THRUST BEARING
83.	1T-2042	[1]	SLEEVE
84.	130-3639	[1]	SLEEVE
85.	130-3640	[1]	RACE-THRUST BEARING
86.	8T-4896	[11]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

POWER TRAIN

WHEEL GP

Operation and Maintenance Manual

Tire Inflation Pressure Adjustment
854G Wheel Dozer

Tire Inflation with Nitrogen
854G Wheel Dozer

Tire Inflation - Check
854G Wheel Dozer

Tire Inflation Pressure
854G Wheel Dozer

Special Instruction

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Installation Guide for the Tire Monitoring System on Cat<SUP>®</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}

Service Letter-NACD

Product Support Program For Repairing The Bead Seat Band Weld That May Crack At Either Side Of The Rim Driver Pocket On Certain 992G Wheel Loaders And 854G Wheel Tractors
Product Support Program For Repairing The Bead Seat Band Weld That May Crack At Either Side Of The Rim Driver Pocket On Certain 992G Wheel Loaders And 854G Wheel Tractors

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Rim Mounting
992G Wheel Loader and 854G
Wheel Dozer Power Train

Tool Operating Manual

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201}
Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders {0677, 0760, 3258, 3284, 4050, 4055, 4201}

Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}

Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}

Service Letter-APD

Disassembly and Assembly

Tire and Rim (Front) - Remove and Install
854G Wheel Tractor and 992G Wheel Loader Power Train

Tire and Rim (Rear) - Remove and Install
854G Wheel Tractor and 992G Wheel Loader Power Train

Service Magazine

New Recommendations for Tire Size Differences {4203}
2014/08/06

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog 854G :

136-0883 TIRE & RIM AR

136-0872 TIRE & RIM AR

136-0871 TIRE & RIM AR

127-2965 TIRE & RIM AR

127-2964 TIRE & RIM AR

127-2963 TIRE & RIM AR

127-2962 TIRE & RIM AR

109-6861 SUPPORT GP-TRANSMISSION

146-2445 TIRE & RIM AR

147-9632 TIRE & RIM AR

165-6171 TIRE & RIM AR

165-6175 TIRE & RIM AR

170-7326 TIRE & RIM AR

170-8004 TIRE & RIM AR

133-9886 TORQUE CONVERTER & HOUSING GP

1C-7954 TORQUE CONVERTER AR-LOCKUP

Truck sale:

Call

1999 CAT 854G

Matilda Equipment Pty Ltd
Toowoomba, QLD, Australia

1998 CAT 854G

HIGH TECH INDUSTRIES
Mexia, Texas

$225,000 USD

CATERPILLAR 854G 2003
- WHEEL DOZERS
RING POWER CORP
Florida United States

CATERPILLAR 854G 1999
- WHEEL DOZERS
FABICK WI
United States