COOLING SYSTEM
LINES GP-WATERPUMP GP-WATER
RADIATOR GP
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GPAIR CLEANER GP
COOLING SYSTEM
LINES GP-WATER#SEBP27650070
134-6257: LINES GP-WATER
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 248-5513 | [2] | REGULATOR-TEMPERATURE (92-DEG C)(WATER) | |
| 2. | 7C-0307 | [3] | GASKET | |
| 3. | 109-0073 | [1] | SEAL-O-RING | |
| 4. | 4N-1799 | [1] | FLANGE | |
| 5. | 0S-1619 | [7] | BOLT (3/8-16X3-IN) | |
| 6. | 343-8888 | [1] | GASKET | |
| 7. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| 8. | 103-8943 | [1] | BONNET-TC OIL COOLER | |
| 9. | 9S-1366 | [6] | BOLT (1/2-13X2.5-IN) | |
| 10. | 7S-8767 | [2] | GASKET | |
| 11. | 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | |
| 12. | 4N-8452 | [1] | SUPPORT | |
| 13. | 1A-2029 | [14] | BOLT (3/8-16X1.125-IN) | |
| 14. | 6N-0008 | [1] | ADAPTER | |
| 15. | 109-0074 | [1] | SEAL-O-RING | |
| 16. | 6N-7145 | [1] | BONNET-INLET | |
| 17. | 0S-1588 | [6] | BOLT (3/8-16X1.25-IN) | |
| 18. | 4N-2380 | [1] | SPACER-SPECIAL (OIL COOLER) | |
| 19. | 4N-2199 | [2] | GASKET | |
| 20. | 4N-2198 | [1] | FLANGE | |
| 21. | 109-0075 | [1] | SEAL-O-RING | |
| 22. | 7C-1933 | [1] | BONNET | |
| 23. | 0S-1587 | [5] | BOLT (1/2-13X1.75-IN) | |
| 24. | 1B-2886 | [1] | BOLT (1/2-13X3.75-IN) | |
| 25. | 4N-1946 | [1] | GASKET | |
| 26. | 7X-7731 | [3] | PLUG-PIPE (3/4-14-THD) | |
| 27. | 4P-3864 | [1] | COVER-WATER PUMP | |
| 28. | 0S-1594 | [5] | BOLT (3/8-16X1-IN) | |
| 29. | 6N-5213 | [1] | ELBOW-OUTLET | |
| 30. | 4N-1156 | [2] | GASKET-REGULATOR COVER | |
| 31. | 1N-4929 | [2] | COVER AS-REGULATOR | |
| (EACH INCLUDES) | ||||
| 3S-9643 | [1] | SEAL-LIP TYPE | ||
| 4M-1336 | [1] | FERRULE | ||
| 32. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 116-5822 | [2] | TUBE-RADIATOR INLET | |
| 34. | 2M-1395 | [2] | GASKET | |
| 35. | 7W-6534 | [4] | PLUG-PIPE | |
| 36. | 0L-1143 | [1] | BOLT (3/8-16X2.5-IN) | |
| 37. | 109-0072 | [2] | SEAL-O-RING | |
| 38. | 8N-5543 | [1] | TUBE | |
| 39. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
| 40. | 6N-1412 | [1] | ELBOW-BYPASS | |
| 41. | 5B-9603 | [1] | BOLT (3/8-16X5-IN) | |
| 42. | 109-0076 | [1] | SEAL-O-RING | |
| 43. | 6N-1411 | [1] | ELBOW-OUTLET | |
| 44. | 8T-6762 | [2] | PLUG-PIPE (1/2-14-THD) | |
| 45. | 4W-0419 Y | [1] | CORE GP-OIL COOLER (TRANSMISSION) | |
| 46. | 7C-0145 | [1] | CORE AS-OIL COOLER (ENGINE)(ENGINE) | |
| 47. | 109-0077 | [2] | SEAL-O-RING | |
| 48. | 0S-1608 | [6] | BOLT (3/8-16X3.75-IN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27650071
137-1339: PUMP GP-WATER
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-1344 | [1] | HOUSING AS-PUMP | |
| 4M-1336 | [1] | FERRULE | ||
| 5H-8985 | [1] | PIN-SPRING | ||
| 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | ||
| 2. | 111-2721 J | [1] | PLUG-FELT (WATER PUMP) | |
| 3. | 128-0317 J | [1] | SEAL GP (WATER PUMP) | |
| 4. | 9M-6527 J | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 5. | 0S-1591 J | [1] | BOLT (3/8-16X1.5-IN) | |
| 6. | 108-7930 J | [1] | BEARING AS-ROLLER | |
| 7. | 153-1256 J | [1] | SEAL-LIP TYPE | |
| 8. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 9. | 4N-1948 | [1] | GEAR (43-TEETH) | |
| 10. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 11. | 135-4928 J | [1] | SHAFT-WATER PUMP | |
| 12. | 136-1107 J | [1] | RETAINER | |
| 13. | 5S-0581 J | [1] | WASHER-HARD (17X38X8-MM THK) | |
| 14. | 137-1970 | [1] | IMPELLER-PUMP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 377-7037 AJ | [1] | KIT-WATER PUMP | ||
| A | NOT PART OF THIS GROUP | |||
| J | KIT(S) MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP27650072
352-0200: PUMP GP-WATER
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-1344 | [1] | HOUSING AS-PUMP | |
| 4M-1336 | [1] | FERRULE | ||
| 5H-8985 | [1] | PIN-SPRING | ||
| 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | ||
| 111-2721 | [1] | PLUG-FELT | ||
| 2. | 137-1970 | [1] | IMPELLER-PUMP | |
| 3. | 349-2654 | [1] | SEAL-WATER PUMP | |
| 4. | 9M-6527 | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 5. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 6. | 108-7930 | [1] | BEARING AS-ROLLER | |
| 7. | 153-1256 | [1] | SEAL-LIP TYPE | |
| 8. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 9. | 4N-1948 | [1] | GEAR (43-TEETH) | |
| 10. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 11. | 135-4928 | [1] | SHAFT-WATER PUMP | |
| 12. | 136-1107 | [1] | RETAINER | |
| 13. | 5S-0581 | [1] | WASHER-HARD (17X38X8-MM THK) |
#SEBP27650073
4N-5837: PUMP GP-WATER
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-1339 CY | [1] | PUMP GP-WATER | |
| 2. | 112-1579 J | [1] | SEAL-O-RING | |
| 3. | 101-2749 | [1] | ADAPTER | |
| 4. | 9X-7371 J | [1] | SEAL-O-RING | |
| 5. | 112-1580 J | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| 7. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| AVAILABLE GASKET KIT(S): | ||||
| 360-4174 J | [1] | KIT-WATER PUMP | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27650074
4N-5837: PUMP GP-WATER
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 352-0200 CY | [1] | PUMP GP-WATER | |
| 2. | 112-1579 | [1] | SEAL-O-RING | |
| 3. | 101-2749 | [1] | ADAPTER | |
| 4. | 9X-7371 | [1] | SEAL-O-RING | |
| 5. | 112-1580 | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| 7. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27650075
7E-0612: RADIATOR GP
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-0613 Y | [1] | RADIATOR GP | |
| 2. | 5S-4629 | [2] | GASKET-VALVE | |
| 3. | 5S-1213 | [1] | PLATE-PRESSURE VALVE | |
| 4. | 5S-1211 | [1] | COVER-RELIEF VALVE | |
| 5. | 7X-2537 M | [5] | BOLT (M8X1.25X35-MM) | |
| 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 6. | 9X-2488 | [2] | CLAMP-HOSE | |
| 7. | 5S-1218 | [1] | VALVE AS-PRESSURE RELIEF | |
| 8. | 9Y-9236 | [1] | GAUGE-SIGHT | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9. | 5P-0767 E | HOSE (16-CM) | ||
| 10. | 4P-6175 | [1] | BAFFLE AS-TOP | |
| 4K-9429 | [4] | RIVET-POP | ||
| 11. | 4P-6176 | [1] | BAFFLE AS-TOP | |
| 4K-9429 | [6] | RIVET-POP | ||
| 12. | 4P-6177 | [1] | BAFFLE AS-TOP | |
| 4K-9429 | [4] | RIVET-POP | ||
| 13. | 8T-4182 M | [10] | BOLT (M10X1.5X45-MM) | |
| 14. | 8T-4121 | [39] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 4P-9418 | [1] | BAFFLE AS (RH) | |
| 4K-9429 | [5] | RIVET-POP | ||
| 16. | 4P-9417 | [1] | BAFFLE AS (LH) | |
| 4K-9429 | [5] | RIVET-POP | ||
| 17. | 8T-4195 M | [9] | BOLT (M10X1.5X30-MM) | |
| 18. | 1N-3599 Y | [1] | COVER GP-RADIATOR CAP | |
| 19. | 9Y-0184 | [2] | TUBE AS | |
| 20. | 4N-1418 | [2] | GASKET-RADIATOR INLET | |
| 21. | 8T-4196 M | [8] | BOLT (M10X1.5X35-MM) | |
| 22. | 5P-1262 E | HOSE (0.6-CM) | ||
| 23. | 5P-4868 | [8] | CLAMP-HOSE | |
| 24. | 4P-6173 | [1] | TUBE AS | |
| 25. | 4P-6174 | [1] | TUBE AS | |
| 26. | 4P-6172 | [1] | TUBE AS | |
| 27. | 6I-0784 | [1] | TUBE | |
| 28. | 2S-9485 | [1] | GASKET | |
| 29. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 30. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 5P-1268 E | HOSE (12.7-CM) | ||
| 32. | 5P-1717 | [4] | CLAMP-HOSE | |
| 33. | 8N-7257 | [2] | MOUNT AS | |
| 34. | 7N-0959 | [2] | CAP | |
| 35. | 7X-2556 M | [4] | BOLT (M16X2X100-MM) | |
| 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | ||
| 36. | 1N-4817 | [1] | TUBE AS | |
| 37. | 4P-8763 | [2] | CLAMP-MOUNTING BLOCK | |
| 38. | 2M-4998 | [2] | CLAMP-MOUNTING BLOCK | |
| 39. | 3H-8726 | [4] | MOUNT AS | |
| 40. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 41. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| 42. | 8M-7057 | [1] | ADAPTER-PLUG | |
| 43. | 8M-7066 | [1] | GASKET | |
| 44. | 6N-9590 | [1] | PLUG-DRAIN | |
| 45. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 46. | 8T-4185 M | [3] | BOLT (M10X1.5X50-MM) | |
| 47. | 2S-3440 | [1] | CLAMP-HOSE | |
| 48. | 8C-6872 | [2] | CONNECTOR | |
| 49. | 6V-8398 | [4] | SEAL-O-RING | |
| 50. | 5P-0765 E | HOSE (55 CM) | ||
| 51. | 1H-9779 | [1] | CONNECTOR-HOSE | |
| 52. | 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | |
| 53. | 108-9610 I | [1] | HOSE AS | |
| 54. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 55. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 56. | 4E-0915 I | [1] | HOSE AS | |
| 57. | 3S-8664 | [5] | CLIP (LOOP) | |
| 58. | 2B-0941 | [1] | SPACER (10.5X19X19-MM THK) | |
| 59. | 2T-2396 | [1] | ELBOW | |
| 60. | 8C-6871 | [1] | CONNECTOR | |
| 61. | 9M-6522 | [1] | CONNECTOR (1/2-14 NPTF) | |
| 62. | 101-0255 | [1] | TUBE AS | |
| 63. | 8M-6146 | [1] | TUBE | |
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27650076
7E-0613: RADIATOR GP
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-6179 | [1] | TANK AS-TOP | |
| 8T-3490 M | [12] | NUT-WELD (M10X1.5-THD) | ||
| 1S-0286 | [1] | STUD-TAPERLOCK | ||
| 2. | 4P-6182 | [1] | CHANNEL AS (RH) | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 4P-6180 | [1] | TANK AS-BOTTOM | |
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 4P-6181 | [1] | CHANNEL AS (LH) | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 6. | 8T-4121 | [66] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4195 M | [10] | BOLT (M10X1.5X30-MM) | |
| 8. | 4P-9942 | [13] | SEAL-END TANK | |
| 9. | 4P-9943 | [13] | SEAL-END TANK | |
| 10. | 4P-6563 | [13] | CORE AS-RADIATOR | |
| 11. | 4P-9577 | [1] | PLATE AS | |
| 12. | 8T-3490 M | [26] | NUT-WELD (M10X1.5-THD) | |
| 13. | 8T-4196 M | [26] | BOLT (M10X1.5X35-MM) | |
| 14. | 8T-4186 M | [20] | BOLT (M10X1.5X40-MM) | |
| 15. | 5P-5931 D | SEAL | ||
| 16. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP27650077
122-9520: AFTERCOOLER GP-WATER
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-2564 | [1] | GASKET | |
| 2. | 4N-8472 | [1] | HOUSING-AFTERCOOLER | |
| 3. | 4N-8628 | [1] | GASKET | |
| 4. | 255-4492 | [1] | COVER-AFTERCOOLER | |
| 5. | 2W-6686 | [2] | ADAPTER | |
| 6. | 2W-6593 | [1] | CORE AS-AFTERCOOLER | |
| 7. | 4N-5788 | [2] | ADAPTER | |
| 8. | 109-0076 | [4] | SEAL-O-RING | |
| 9. | 112-8186 | [2] | SEAL-O-RING | |
| 10. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 11. | 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 1B-7182 | [7] | BOLT (5/16-18X1.25-IN) | |
| 13. | 0T-0573 | [14] | BOLT (3/8-16X2.75-IN) | |
| 14. | 5M-2894 | [36] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 7W-6492 | [3] | PLUG-PIPE (1/2-14-THD) | |
| 16. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 17. | 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | |
| 18. | 0S-1590 | [2] | BOLT (3/8-16X2-IN) | |
| 19. | 0S-1571 | [20] | BOLT (3/8-16X1.75-IN) |
#SEBP27650078
6I-2586: AIR CLEANER GP
Parts for your 844 WHEEL DOZER:
CATERPILLAR SIS#SEBP27650079
6I-2588: AIR CLEANER GP
Parts for your 844 WHEEL DOZER:
CATERPILLAR SISInformation:
COOLING SYSTEM
LINES GP-WATER
Engine News
Operation and Maintenance Manual
Specifications
Disassembly and Assembly
Engine Oil Cooler Bypass Valve - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
3408E and 3412E Engines for Caterpillar Built Machines
Water Temperature Regulator - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
3408E and 3412E Engines for Caterpillar Built Machines
Water Temperature Regulator - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine



