AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

153-0579 PANEL GP-CONTROL S/N 6GW1-UP SWITCHGEAR CONVERSION PART OF 153-0573 PANEL GP-ELECTRONIC FOR USE WITH EUI AN ATTACHMENT 3512B


OPERATOR STATION
PANEL GP

GENERATOR SET 3512B GENERATOR SET 6GW
 3512B Generator Set 6GW00001-UP SEBP2772 3512B 6GW   (1998)

OPERATOR STATION

PANEL GP
PANEL GP-CONTROL
153-0575 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0575 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0579 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0579 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0579 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0599 PANEL GP-CONTROL
 

#SEBP27720710
 

153-0579: PANEL GP-CONTROL

153-0579 PANEL GP-CONTROL
S/N 6GW1-UP
SWITCHGEAR CONVERSION
PART OF 153-0573 PANEL GP-ELECTRONIC
FOR USE WITH EUI
AN ATTACHMENT
i00929108 SEBP2772
1530579 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1750 [1] DOOR AS  
2. 158-8774 Y [1] CONTROL GP-ENGINE MONITORING  
3. 100-5566 [3] BEZEL  
4. 8C-6433 M [2] SCREW (M6X1X30-MM)  
5. 154-0382 Y [1] MODULE GP-QUAD GAUGE  
    (OIL PRESSURE, COOLANT TEMPERATURE, BATTERY CHARGING, OIL TEMPERATURE)
6. 154-0383 Y [1] MODULE GP-QUAD GAUGE  
    (INTAKE/COMBUSTION AIR PRESSURE & TEMPERATURE, EXHAUST GAS TEMPERATURE, FUEL PRESSURE)
7. 143-4463 [1] SWITCH AS-PUSH BUTTON (ALARM SILENCE)  
8. 143-4464 [1] BLOCK-CONTACT  
9. 143-4465 [1] BLOCK-CONTACT  
10. 109-6507 [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
11. 111-1325 [2] BLOCK-CONTACT (2-POLE)  
12. 143-6945 [2] GROMMET  
13. 8N-0694 Y [1] SWITCH AS-TOGGLE (SINGLE POLE)(SCROLL)  
14. 7N-8008 [1] SWITCH AS-TOGGLE (CLEAR, MODE)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
15. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
16. 3N-5979 [1] SWITCH-ROTARY (4-POSITION)(ENGINE CONTROL)  
17. 142-8234 [2] HINGE AS  
18. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
19. 154-2718 [1] FILM-CONTROL PANEL (CATERPILLAR MONITORING SYSTEM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720711
 

153-0579: PANEL GP-CONTROL

153-0579 PANEL GP-CONTROL
S/N 6GW1-UP
SWITCHGEAR CONVERSION
PART OF 153-0573 PANEL GP-ELECTRONIC
Type 1
FOR USE WITH EUI
AN ATTACHMENT
i01220121 SEBP2772
1530579 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1750 [1] DOOR AS  
2. 166-7580 C [1] CONTROL GP-MONITOR (CATERPILLAR MONITORING SYSTEM)  
3. 100-5566 [3] BEZEL (ONE MODULE)  
4. 154-2718 [1] FILM-CONTROL PANEL (CATERPILLAR MONITORING SYSTEM)  
5. 166-6944 CY [1] MODULE GP-QUAD GAUGE  
    (OIL PRESSURE, COOLANT TEMPERATURE, BATTERY CHARGING, OIL TEMPERATURE)
6. 166-6945 CY [1] MODULE GP-QUAD GAUGE  
    (INTAKE/COMBUSTION AIR PRESSURE & TEMPERATURE, EXHAUST GAS TEMPERATURE, FUEL PRESSURE)
7. 143-4463 [1] SWITCH AS-PUSH BUTTON (ALARM SILENCE)  
8. 143-4464 [1] BLOCK-CONTACT  
9. 143-4465 [1] BLOCK-CONTACT  
10. 109-6507 [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
11. 111-1325 [2] BLOCK-CONTACT (2-POLE)  
12. 143-6945 [2] GROMMET  
13. 8N-0694 Y [1] SWITCH AS-TOGGLE (SINGLE POLE)(SCROLL)  
14. 7N-8008 [1] SWITCH AS-TOGGLE (CLEAR, MODE)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
15. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
16. 3N-5979 [1] SWITCH-ROTARY (4-POSITION)(ENGINE CONTROL)  
17. 142-8234 [2] HINGE AS  
18. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
19. 8C-6433 M [2] SCREW (M6X1X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720712
 

153-0579: PANEL GP-CONTROL

153-0579 PANEL GP-CONTROL
S/N 6GW1-UP
SWITCHGEAR CONVERSION
PART OF 153-0573 PANEL GP-ELECTRONIC
Type 2
FOR USE WITH EUI
AN ATTACHMENT
i02206789 SEBP2772
1530579 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-2539 C [1] DOOR AS  
2. 166-7580 [1] CONTROL GP-MONITOR (CATERPILLAR MONITORING SYSTEM)  
3. 100-5566 [3] BEZEL  
4. 154-2718 [1] FILM-CONTROL PANEL (CATERPILLAR MONITORING SYSTEM)  
5. 166-6944 Y [1] MODULE GP-QUAD GAUGE  
    (OIL PRESSURE, COOLANT TEMPERATURE, BATTERY CHARGING, OIL TEMPERATURE)
6. 166-6945 Y [1] MODULE GP-QUAD GAUGE  
    (INTAKE/COMBUSTION AIR PRESSURE & TEMPERATURE, EXHAUST GAS TEMPERATURE, FUEL PRESSURE)
7. 226-6446 C [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
  206-9509 [1] BUTTON-STOP  
  261-5503 [1] COLLAR  
8. 206-9512 C [2] CONTACT  
9. 228-6935 C [2] BLOCK-CONTACT  
10. 8N-0694 Y [1] SWITCH AS-TOGGLE (SINGLE POLE)(SCROLL)  
11. 7N-8008 [1] SWITCH AS-TOGGLE (CLEAR, MODE)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
12. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
13. 3N-5979 [1] SWITCH-ROTARY (4-POSITION)(ENGINE CONTROL)  
14. 143-6945 [2] GROMMET  
15. 169-4481 C [2] HINGE AS  
16. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
17. 8C-6433 M [2] SCREW (M6X1X30-MM)  
18. 6V-9492 CM [12] SCREW-MACHINE (M4X0.7X25-MM)  
19. 8C-9660 C [12] WASHER (4.6X7.9X0.8-MM THK)  
20. 8T-7961 CM [12] LOCKNUT (M4X0.7-THD)  
21. 7M-3361 [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720713
 

153-0599: PANEL GP-CONTROL

153-0599 PANEL GP-CONTROL
S/N 6GW1-UP
PART OF 153-0637 PANEL GP-ELECTRONIC
FOR USE WITH EMCPII, EUI
AN ATTACHMENT
i00751352 SEBP2772
1530599 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1752 [1] DOOR AS  
2. 154-6104 [1] PLATE-COVER  
3. 143-0887 [2] PLATE-COVER  
4. 095-0742 M [8] SCREW-MACHINE (M6X1X16-MM)  
5. 6V-7743 M [8] LOCKNUT (M6X1-THD)  
6. 8T-4205 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 3E-9865 [6] LOCKNUT (1/4-20-THD)  
8. 3K-8782 [10] FUSE (10-AMPERE)  
9. 133-6350 Y [1] CONTROL GP-EMCP ELECTRONIC (GENERATOR SET CONTROL)(GENERATOR SET)  
10. 143-6945 [2] GROMMET  
11. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
12. 8C-6433 M [2] SCREW (M6X1X30-MM)  
13. 7N-5876 [2] LAMP (24-VOLT, 0.2-AMPERE)(CLEAR)  
14. 7G-9730 [2] LAMP AS (120-VOLT, 3-WATT)  
    (EACH INCLUDES)
  6V-8367 [1] LOCKWASHER  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
15. 7C-4471 [1] POTENTIOMETER AS (10,000-OHM)(SPEED CONTROL)  
16. 7C-4550 [1] SEAL (ROTATING SHAFT)  
17. 4W-5972 [1] KNOB  
18. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
19. 3N-5979 [1] SWITCH-ROTARY (4-POSITION)(ENGINE CONTROL)  
20. 109-6507 [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
21. 111-1325 [2] BLOCK-CONTACT (2-POLE)  
22. 142-8234 [2] HINGE AS  
23. 5C-9553 M [4] BOLT (M6X1X16-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720714
 

153-0599: PANEL GP-CONTROL

153-0599 PANEL GP-CONTROL
S/N 6GW1-UP
PART OF 153-0637 PANEL GP-ELECTRONIC
FOR USE WITH EMCPII, EUI
AN ATTACHMENT
i02017481 SEBP2772
1530599 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-2540 C [1] DOOR AS  
2. 154-1769 C [1] PLATE-COVER  
3. 143-0887 [2] PLATE-COVER  
4. 095-0742 CM [12] SCREW-MACHINE (M6X1X16-MM)  
5. 3E-9865 C [6] LOCKNUT (1/4-20-THD)  
6. 8T-4205 C [6] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 3K-8782 [10] FUSE (10-AMPERE)  
8. 133-6351 Y [1] CONTROL GP-EMCP ELECTRONIC (GENERATOR SET CONTROL)(GENERATOR SET CONTROL)  
9. 143-6945 [2] GROMMET  
10. 8C-6433 CM [2] SCREW (M6X1X30-MM)  
11. 7N-5876 [2] LAMP (24-VOLT, 0.2-AMPERE)(CLEAR)  
12. 7G-9730 [2] LAMP AS (120-VOLT, 3-WATT)  
    (EACH INCLUDES)
  6V-8367 [1] LOCKWASHER  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
13. 110-7884 C [1] SWITCH AS-TOGGLE (MOMENTARY)(VOLTAGE ADJUSTMENT)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
14. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
15. 3N-5979 [1] SWITCH-ROTARY (4-POSITION)(ENGINE CONTROL)  
16. 226-6446 C [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
17. 169-4481 C [2] HINGE AS  
18. 154-3045 [1] FILM-CONTROL PANEL (EMCP II)  
19. 6V-7743 CM [12] LOCKNUT (M6X1-THD)  
20. 9X-8256 C [14] WASHER (6.6X12X2-MM THK)  
21. 206-9512 C [1] CONTACT  
22. 228-6935 C [1] BLOCK-CONTACT  
23. 213-0985 C [2] GROMMET  
24. 241-6070 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720715
 

171-9929: PANEL GP-CONTROL

171-9929 PANEL GP-CONTROL
S/N 6GW1-UP
PWM / LOADSHARE CONTROL
PART OF 190-5306 PANEL GP-ELECTRONIC
Type 1
AN ATTACHMENT
i01121319 SEBP2772
1719929 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1757 [1] PANEL AS  
  142-2463 [1] INSERT-NUT (M6X1-THD)  
2. 309-1583 [1] CONTROL AS-GOVERNOR (LOAD SHARE)  
3. 154-5877 Y [1] TRANSFORMER GP-CURRENT  
4. 9Y-8420 [1] COVER (FUSE)  
5. 173-7196 [1] TRANSFORMER AS  
6. 169-4701 Y [1] CONTROL GP-EMCP ELECTRONIC  
7. 245-7384 D DUCT (WIRING)(0.89-M)  
8. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
9. 8T-0337 M [16] SCREW-MACHINE (M4X0.7X12-MM)  
10. 095-0742 M [4] SCREW-MACHINE (M6X1X16-MM)  
11. 8T-3844 M [1] BOLT (M6X1X70-MM)  
12. 8C-9660 [16] WASHER (4.6X7.9X0.8-MM THK)  
13. 145-4114 [4] SCREW-SELF-TAPPING (8X0.5-IN)  
14. 095-0827 [4] LOCKWASHER  
   
  231-6393 F [1] HARNESS AS-WIRING (LOAD SHARE MODULE)  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720716
 

171-9929: PANEL GP-CONTROL

171-9929 PANEL GP-CONTROL
S/N 6GW1-UP
PWM / LOADSHARE CONTROL
PART OF 190-5306 PANEL GP-ELECTRONIC
Type 2
AN ATTACHMENT
i07509488 SEBP2772
1719929 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-1757 [1] PANEL AS  
  142-2463 [1] INSERT-NUT (M6X1-THD)  
2. 309-1583 [1] CONTROL AS-GOVERNOR (LOAD SHARE)  
3. 154-5877 Y [1] TRANSFORMER GP-CURRENT  
4. 1H-3338 [4] LOCKWASHER  
5. 173-7196 [1] TRANSFORMER AS (50-AMPERE, 60-HZ, AC)  
6. 169-4701 Y [1] CONTROL GP-EMCP ELECTRONIC  
7. 245-7384 D DUCT (WIRING)(0.89-M)  
8. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
9. 8T-0337 CM [16] SCREW-MACHINE (M4X0.7X12-MM)  
10. 095-0742 M [4] SCREW-MACHINE (M6X1X16-MM)  
11. 8T-3844 M [1] BOLT (M6X1X70-MM)  
12. 8C-9660 [22] WASHER (4.6X7.9X0.8-MM THK)  
13. 145-4114 [4] SCREW-SELF-TAPPING (8X0.5-IN)  
   
  231-6393 CF [1] HARNESS AS-WIRING (LOAD SHARE MODULE)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720717
 

153-0569: PANEL GP-ELECTRONIC

153-0569 PANEL GP-ELECTRONIC
S/N 6GW1-UP
Type 1
FOR USE WITH EMCPII+, EUI
AN ATTACHMENT
i00718715 SEBP2772
1530569 PANEL GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6105 [1] BOX AS  
  5C-8312 M [2] NUT (M4X0.7-THD)  
  8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
2. 154-1755 [1] COVER AS (TOP)  
  142-2461 [4] INSERT-HEX  
3. 153-0575 Y [1] PANEL GP-CONTROL  
4. 153-0581 Y [1] PANEL GP-ELECTRONIC  
5. 154-1754 [1] COVER AS (REAR)  
6. 154-1759 [1] COVER GP-CONTROL PANEL  
  154-1774 [1] COVER  
  7X-2619 M [8] BOLT (M6X1X10-MM)  
  9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  095-0742 M [1] SCREW-MACHINE (M6X1X16-MM)  
  143-6944 [2] HINGE  
  143-6945 [2] GROMMET  
7. 7C-0974 [1] FILM-WARNING (ELECTRICAL SHOCK HAZARD)  
8. 154-6143 [3] PLUG  
9. 143-8798 [2] STRAP AS  
10. 143-8799 [1] SEAL (1280MM)  
11. 9X-8256 [28] WASHER (6.6X12X2-MM THK)  
12. 8C-6433 M [8] SCREW (M6X1X30-MM)(PAN HEAD)  
13. 8T-0337 M [16] SCREW-MACHINE (M4X0.7X12-MM)  
14. 8T-7961 M [20] LOCKNUT (M4X0.7-THD)  
15. 8C-9660 [20] WASHER (4.6X7.9X0.8-MM THK)  
16. 096-3773 M [4] SCREW-MACHINE (M4X0.7X25-MM)  
17. 136-3376 [4] MOUNT-VIBRATION  
18. 095-0742 M [8] SCREW-MACHINE (M6X1X16-MM)  
19. 6V-7743 M [8] LOCKNUT (M6X1-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720718
 

153-0569: PANEL GP-ELECTRONIC

153-0569 PANEL GP-ELECTRONIC
S/N 6GW1-UP
Type 2
FOR USE WITH EMCPII+, EUI
AN ATTACHMENT
i02066060 SEBP2772
1530569 PANEL GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 220-4795 C [1] BOX AS  
  142-2461 [10] INSERT-HEX  
2. 154-1755 [1] COVER AS (TOP)  
  142-2461 [4] INSERT-HEX  
3. 153-0575 Y [1] PANEL GP-CONTROL  
4. 153-0581 Y [1] PANEL GP-ELECTRONIC  
5. 154-1754 [1] COVER AS (REAR)  
6. 170-8400 CY [1] COVER GP-CONTROL PANEL  
7. 7C-0974 [1] FILM-WARNING (ELECTRICAL SHOCK HAZARD)  
8. 7M-3361 C [3] GROMMET  
9. 143-8798 [2] STRAP AS  
10. 246-3082 BCJ SEAL  
11. 9X-8256 C [28] WASHER (6.6X12X2-MM THK)  
12. 8C-6433 CM [8] SCREW (M6X1X30-MM)(PAN HEAD)  
13. 8T-7961 CM [20] LOCKNUT (M4X0.7-THD)  
14. 096-3772 CM [4] SCREW-MACHINE (M4X0.7X16-MM)  
15. 136-3376 [4] MOUNT-VIBRATION  
16. 095-0742 CM [8] SCREW-MACHINE (M6X1X16-MM)  
17. 6V-7743 M [8] LOCKNUT (M6X1-THD)  
18. 236-7523 C [1] HARNESS AS-PANEL (STANDARD)  
19. 6V-9492 CM [4] SCREW-MACHINE (M4X0.7X25-MM)  
20. 8T-0337 CM [12] SCREW-MACHINE (M4X0.7X12-MM)  
21. 8C-9660 C [36] WASHER (4.6X7.9X0.8-MM THK)  
22. 155-0960 C [1] FILM-CONTROL PANEL  
   
  247-7534 FY [1] TRANSFORMER GP-CURRENT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27720719
 

153-0573: PANEL GP-ELECTRONIC

153-0573 PANEL GP-ELECTRONIC
S/N 6GW1-UP
Type 1
FOR USE WITH SWITCHGEAR, EUI
AN ATTACHMENT
i00718716 SEBP2772
1530573 PANEL GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6105 [1] BOX AS  
  5C-8312 M [2] NUT (M4X0.7-THD)  
  8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
2. 154-1755 [1] COVER AS (TOP)  
  142-2461 [4] INSERT-HEX  
3. 153-0579 Y [1] PANEL GP-CONTROL  
4. 153-0585 Y [1] PANEL AS-ELECTRONIC  
5. 154-1754 [1] COVER AS (REAR)  
6. 154-1758 [1] COVER AS  
  154-1773 [1] COVER  
  7X-2619 M [8] BOLT (M6X1X10-MM)  
  9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  095-0742 M [1] SCREW-MACHINE (M6X1X16-MM)  
  143-6944 [2] HINGE  
  143-6945 [2] GROMMET  
7. 154-2719 [1] FILM-CONTROL PANEL (SWITCHGEAR CONVERSION)(EMS II)  
8. 154-2720 [1] FILM-CONTROL PANEL (SWITCHGEAR CONVERSION)  
9. 7C-0974 [1] FILM-WARNING (ELECTRICAL SHOCK HAZARD)  
10. 154-6143 [3] PLUG  
11. 143-8798 [2] STRAP AS  
12. 143-8799 [1] SEAL  
13. 9X-8256 [28] WASHER (6.6X12X2-MM THK)  
14. 8C-6433 M [8] SCREW (M6X1X30-MM)  
15. 8T-0337 M [16] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-7961 M [20] LOCKNUT (M4X0.7-THD)  
17. 8C-9660 [20] WASHER (4.6X7.9X0.8-MM THK)  
18. 096-3773 M [4] SCREW-MACHINE (M4X0.7X25-MM)  
19. 136-3376 [4] MOUNT-VIBRATION  
20. 095-0742 M [8] SCREW-MACHINE (M6X1X16-MM)  
21. 6V-7743 M [8] LOCKNUT (M6X1-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
Procedure for Reconfiguring a 187-3511 Timer Gp to Annunciate a "Not In Auto" Alarm Without Generating Additional Alarms {4490}
2002/11/01
A New Pyrometer Is Available For Certain 3500 and G3500 Engines {7451, 7466, 7490}
2012/12/19
Operation and Maintenance Manual
Gauges and Indicators
3500 Generator Sets
Alarms and Shutoffs
3500B Generator Sets
Engine Air Cleaner Service Indicator - Inspect
3508B, 3512B, and 3516B High Displacement Generator Sets
Gauges and Indicators
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 3 (EMCP 3)
3500B Generator Sets
Monitoring System
3508B, 3512B, and 3516B High Displacement Generator Sets
Engine Air Cleaner Service Indicator - Inspect
3500B Generator Sets
Control Panel - Inspect/Test
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 3 (EMCP 3)
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1 / 4.2 / 4.2B
3500B Generator Sets
Control Panel - Inspect/Test
3500B Generator Sets
Special Instruction
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
Systems Operation
General Information
EMCP3
Real Time Clock Programming
EMCP3
Setpoint Programming
EMCP3
Electronic Control Module (Generator Set)
EMCP3
Data Link
EMCP3
Event Resetting
EMCP3
Event Viewing
EMCP3
Thermocouple Module
EMCP3
Resistive Temperature Device Module
EMCP3
Discrete Input/Output Module
EMCP3
Password Entry
EMCP3
Voltage and Frequency Adjustment
EMCP3
Component Location
EMCP3
Digital Input Programming
EMCP3
Spare Analog Input Programming
EMCP3
Relay Output Programming
EMCP3
Digital Output Programming
EMCP3
System Operation
EMCP3
MUI Engine Monitoring and Control
EMCP3
Text String Programming
EMCP3
Cycle Timer Programming
EMCP3
Trip Point Programming
EMCP3
Monitoring Software for Computer
EMCP3
Testing and Adjusting
Coolant Temperature Sensor - Test
3500B and 3500B High Displacement Generator Set Engines
Indicators for Engine Oil Pressure
3500B and 3500B High Displacement Generator Set Engines
Typical Generator Abbreviations
EMCP3
External Potential Transformer Connections
EMCP3
Electronic Control Module (Generator Set) - Replace
EMCP3
Electronic Control Module (Generator Set) - Configure
EMCP3
Electronic Control Module (Generator Set) - Flash Program
EMCP3
ECM Connections
EMCP3
Engine Setpoint Verification - Test
EMCP3
Troubleshooting
General Information
EMCP3
Engine Cooldown Warning
EMCP3
Engine Overcrank Warning
EMCP3
Engine Speed Warning
EMCP3
Generator Control Not in Automatic Warning
EMCP3
Generator Overcurrent Warning
EMCP3
Generator Overfrequency Warning
EMCP3
Generator Overvoltage Warning
EMCP3
Generator Reverse Power Warning
EMCP3
Generator Underfrequency Warning
EMCP3
Generator Undervoltage Warning
EMCP3
Service Maintenance Interval Warning
EMCP3
Analog Input Circuit Fault
EMCP3
Data Link Circuit Fault
EMCP3
Digital Input Circuit Fault
EMCP3
Digital Output Circuit Fault
EMCP3
Engine Speed Circuit Fault
EMCP3
Unexpected Engine Shutdown
EMCP3
Generator Output Sensing Circuit Fault
EMCP3
Engine Overspeed Warning
EMCP3
Engine Underspeed Warning
EMCP3
Service Magazine
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog 3512B :

PANEL GP-CONTROL
153-0575 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0575 PANEL GP-CONTROL
PANEL AS-ELECTRONIC
153-0585 PANEL AS-ELECTRONIC
PANEL AS-ELECTRONIC
153-0585 PANEL AS-ELECTRONIC
MOUNTING GP-CONTROL
154-1749 MOUNTING GP-CONTROL
MODULE GP-SYSTEM COMMUNICATION
164-8940 MODULE GP-SYSTEM COMMUNICATION
MODULE GP-SYSTEM COMMUNICATION
157-3540 MODULE GP-SYSTEM COMMUNICATION
MODULE GP-SYSTEM COMMUNICATION
102-8627 MODULE GP-SYSTEM COMMUNICATION
PANEL GP-CONTROL
153-0579 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0579 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0599 PANEL GP-CONTROL
PANEL GP-CONTROL
153-0599 PANEL GP-CONTROL
PANEL GP-CONTROL
171-9929 PANEL GP-CONTROL
PANEL GP-CONTROL
171-9929 PANEL GP-CONTROL
PANEL GP-ELECTRONIC
153-0569 PANEL GP-ELECTRONIC
PANEL GP-ELECTRONIC
153-0569 PANEL GP-ELECTRONIC

Truck sale:

Caterpillar 3512B
 
Caterpillar 3512B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3512B, mobile generator sets, Construction
182,189 
Caterpillar 3512B, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
Caterpillar 3512B
 
Caterpillar 3512B
- Industrial engines
FOLEY EQUIPMENT COMPANY
 
190,000 
Caterpillar 3512B, Stationary Generator Sets, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.