439-7439 SUSPENSION GP-REAR S/N 2BW1-UP PART OF 193-6342 SUSPENSION GP-REAR FIELD REPLACEMENT FOR @@@@@229-2346@@@@@ AN ATTACHMENT 789C

439-7439: SUSPENSION GP-REAR

439-7439 SUSPENSION GP-REAR
S/N 2BW1-UP
PART OF 193-6342 SUSPENSION GP-REAR
FIELD REPLACEMENT FOR @@@@@229-2346@@@@@
AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)
2.	4T-4129 J	[1]	RING-WEAR
3.	4T-4769	[2]	COVER AS
4.	8T-6376	[1]	PLATE-INSTRUCTION (HYDRAULIC ACCUMULATOR)
5.	9T-5505	[1]	PLATE
6.	9X-7352	[1]	SEAL-LIP TYPE
7.	229-2347	[1]	CYLINDER AS
7A.	188-8697	[1]	BEARING
7B.	340-2376	[2]	RING-RETAINING
8.	279-2269	[1]	FILM-WARNING (CRUSH HAZARD, READ MANUAL)
9.	279-2271	[1]	FILM-WARNING (HIGH PRESSURE, READ MANUAL)
10.	301-3133	[1]	ROD AS-HYDRAULIC CYLINDER
10A.	188-8697	[1]	BEARING
10B.	340-2376	[2]	RING-RETAINING
11.	366-0231	[1]	RING-BACKUP
12.	438-5123	[1]	SEAL-U-CUP
13.	438-5124	[1]	RING-BACKUP
14.	439-3901 J	[1]	RING-WEAR
15.	440-0132	[1]	HEAD AS
17.	229-2364	[19]	BOLT (5/8-11X4.25-IN)
18.	229-2365	[4]	BOLT (5/8-11X5-IN)
19.	320-2510	[1]	SEAL-O-RING
20.	330-6821	[1]	SEAL AS-BUFFER
21.	4B-9786	[1]	BALL
22.	5P-8247	[23]	WASHER-HARD (17X32X3.5-MM THK)
23.	8M-8281	[2]	SEAL-O-RING
24.	223-4720	[1]	PLATE-INFORMATION (SUSPENSION CYL, TEMP RANGE)

			AVAILABLE REPAIR KIT(S):
	563-0694 J	[1]	KIT-SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

5T-4466: SUSPENSION GP-REAR

SUSPENSION GP-REAR

5T-4466 SUSPENSION GP-REAR
S/N 2BW1-140
PART OF 144-3025 CHASSIS AR, 263-7389 SUSPENSION AR
ALSO AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-1801 Y	[2]	SUSPENSION GP-REAR
2.	150-6307	[4]	PIN
3.	150-3981	[4]	PLATE
4.	6V-6869	[24]	BOLT-12 POINT HEAD (3/4-10X2.75-IN)
	5H-1504	[24]	WASHER-HARD (20X33.5X5-MM THK)
5.	9T-2238	[4]	VALVE AS (SUSPENSION CHARGING)
			(EACH INCLUDES)
	175-3185	[1]	CORE-VALVE
	6J-0368	[1]	CAP
	5M-6708	[4]	WASHER (0.609X1.25X0.219-IN THK)
6.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
7.	124-0328 Y	[2]	SENSOR GP-PRESSURE (PAYLOAD MONITOR)
8.	106-7358	[1]	PLATE (LH)
9.	5M-6214	[2]	PLUG (1/8-27 PTF)
10.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
11.	106-7359	[1]	PLATE (RH)
12.	129-1029 C	[2]	VALVE GP-CHECK (PAYLOAD MONITOR)
			(EACH INCLUDES)
	175-3185	[1]	CORE-VALVE
13.	033-6039	[2]	SEAL-O-RING
14.	114-3361 C	[2]	SEAL-O-RING
15.	030-0167	[2]	RING-BACKUP
16.	3B-7614	[8]	BOLT (3/8-16X4-IN)
17.	106-7357	[2]	MANIFOLD
	8M-4447	[4]	SEAL-O-RING
18.	115-9310	[2]	COVER-SUSPENSION
19.	115-9311	[4]	CLAMP-HOSE
20.	0L-1178	[12]	BOLT (3/4-10X2-IN)
21.	5P-8248	[12]	WASHER-HARD (20X36.5X3.5-MM THK)
22.	150-3982	[4]	PLATE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

5T-4466: SUSPENSION GP-REAR

SUSPENSION GP-REAR

5T-4466 SUSPENSION GP-REAR -PAYLOAD MONITOR
S/N 2BW141-589
PART OF 144-3025, 170-3594 CHASSIS AR, 193-6330, 263-7389 SUSPENSION AR
ALSO AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-1801 Y	[2]	SUSPENSION GP-REAR
2.	150-6307	[4]	PIN
3.	150-3981	[4]	PLATE
4.	6V-6869	[24]	BOLT-12 POINT HEAD (3/4-10X2.75-IN)
	5H-1504	[24]	WASHER-HARD (20X33.5X5-MM THK)
5.	9T-2238	[4]	VALVE AS (NITROGEN CHARGING)
			(EACH INCLUDES)
	175-3185	[1]	CORE-VALVE
	6J-0368	[1]	CAP
	5M-6708	[4]	WASHER (0.609X1.25X0.219-IN THK)
6.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
7.	175-3186 CY	[2]	SENSOR GP-PRESSURE (PAYLOAD MONITOR)
8.	106-7358	[1]	PLATE (LH)
9.	5M-6214	[2]	PLUG (1/8-27 PTF)
10.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
11.	106-7359	[1]	PLATE (RH)
12.	129-1029	[2]	VALVE GP-CHECK (PAYLOAD MONITOR)
			(EACH INCLUDES)
	175-3185	[1]	CORE-VALVE
13.	033-6039	[2]	SEAL-O-RING
14.	114-3361	[2]	SEAL-O-RING
15.	030-0167	[2]	RING-BACKUP
16.	3B-7614	[8]	BOLT (3/8-16X4-IN)
17.	106-7357	[2]	MANIFOLD
	8M-4447	[4]	SEAL-O-RING
18.	115-9310	[2]	COVER-SUSPENSION
19.	115-9311	[4]	CLAMP-HOSE
20.	0L-1178	[12]	BOLT (3/4-10X2-IN)
21.	5P-8248	[12]	WASHER-HARD (20X36.5X3.5-MM THK)
22.	150-3982	[4]	PLATE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

5T-4466: SUSPENSION GP-REAR

SUSPENSION GP-REAR

5T-4466 SUSPENSION GP-REAR -PAYLOAD MONITOR
S/N 2BW611-714
PART OF 193-6330, 263-7389 SUSPENSION AR
AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[2]	STRAP-CABLE
2.	4L-7124 C	[4]	BOLT (1/4-20X1.25-IN)
3.	5M-6708	[4]	WASHER (0.609X1.25X0.219-IN THK)
4.	9T-2238	[4]	VALVE AS (PAYLOAD MONITOR)
			(EACH INCLUDES)
	175-3185	[1]	CORE-VALVE
	6J-0368	[1]	CAP
5.	106-1801 Y	[2]	SUSPENSION GP-REAR
6.	106-7357	[2]	MANIFOLD
7.	115-9310	[2]	COVER-SUSPENSION
8.	115-9311	[4]	CLAMP-HOSE
9.	129-1029	[2]	VALVE GP-CHECK (PAYLOAD MONITOR)
			(EACH INCLUDES)
	175-3185	[1]	CORE-VALVE
10.	150-3981	[4]	PLATE
11.	150-3982	[4]	PLATE
12.	150-6307	[4]	PIN
13.	228-4929 C	[2]	BLOCK AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
14.	239-3221	[1]	PLATE (RH)
15.	239-3222 C	[1]	PLATE (LH)
16.	030-0167	[2]	RING-BACKUP
17.	033-6039	[2]	SEAL-O-RING
18.	0L-1178	[12]	BOLT (3/4-10X2-IN)
19.	114-3361	[2]	SEAL-O-RING
20.	3B-7614	[8]	BOLT (3/8-16X4-IN)
21.	3J-1907 C	[2]	SEAL-O-RING
22.	4P-8134 C	[2]	CLIP (LADDER)
23.	5H-1504	[24]	WASHER-HARD (20X33.5X5-MM THK)
24.	5M-6214	[2]	PLUG (1/8-27 PTF)
25.	5P-0537 C	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
26.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
27.	5P-8248	[12]	WASHER-HARD (20X36.5X3.5-MM THK)
28.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
29.	6V-6869	[24]	BOLT-12 POINT HEAD (3/4-10X2.75-IN)
30.	8M-4447	[4]	SEAL-O-RING
31.	8T-4133 CM	[2]	NUT (M10X1.5-THD)
32.	8T-4137 CM	[2]	BOLT (M10X1.5X20-MM)
33.	8T-4896 C	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
34.	221-3417 CY	[2]	SENSOR GP-PRESSURE (VARIABLE FREQUENCY)(PAYLOAD MONITOR)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

5T-4466: SUSPENSION GP-REAR

SUSPENSION GP-REAR

5T-4466 SUSPENSION GP-REAR -PAYLOAD MONITOR
S/N 2BW715-1466
PART OF 193-6330, 263-7389 SUSPENSION AR
AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	4L-7124	[4]	BOLT (1/4-20X1.25-IN)
3.	7K-1181	[2]	STRAP-CABLE
4.	8T-8737	[6]	PLUG-SEAL
5.	106-1801 Y	[2]	SUSPENSION GP-REAR
6.	115-9310	[2]	COVER-SUSPENSION
7.	115-9311	[4]	CLAMP-HOSE
8.	150-3772	[4]	PIN
9.	150-3981	[4]	PLATE
10.	150-3982	[4]	PLATE
11.	221-3417 Y	[2]	SENSOR GP-PRESSURE (VARIABLE FREQUENCY)(PAYLOAD MONITOR)
12.	228-4929	[2]	BLOCK AS
13.	238-9928 C	[4]	VALVE AS
			(EACH INCLUDES)
	239-5304	[1]	CAP
	239-5305	[1]	CORE-VALVE
	242-4313	[1]	SEAL-O-RING
14.	239-3221	[1]	PLATE (RH)
15.	239-3222	[1]	PLATE (LH)
16.	240-0387 C	[2]	MANIFOLD
17.	306-2168	[2]	VALVE GP-CHECK (PAYLOAD PRESSURE SENSOR)
			(EACH INCLUDES)
	129-1029	[1]	VALVE GP-CHECK
	175-3185	[1]	CORE-VALVE
	114-3361	[2]	SEAL-O-RING
18.	030-0167	[2]	RING-BACKUP
19.	033-6039	[2]	SEAL-O-RING
20.	121-3120 M	[24]	BOLT-12 POINT HEAD (M20X2.5X70-MM)
21.	130-5300	[2]	CLIP
22.	3B-7614	[8]	BOLT (3/8-16X4-IN)
23.	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
24.	3J-1907	[2]	SEAL-O-RING
25.	4P-7581	[2]	CLIP (LADDER)
26.	5M-6214	[2]	PLUG (1/8-27 PTF)
27.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
29.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
30.	7X-2563 M	[12]	BOLT (M20X2.5X60-MM)
31.	8M-4447	[4]	SEAL-O-RING
32.	8T-4123	[36]	WASHER (22X35X3.5-MM THK)
33.	8T-4133 M	[2]	NUT (M10X1.5-THD)
34.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
35.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

152-2128: TREAD GP-NON-SKID

TREAD GP-NON-SKID

152-2128 TREAD GP-NON-SKID
S/N 2BW1-569
PART OF 144-3025, 170-3594 CHASSIS AR

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5T-8415	[6]	PLATE
2.	9M-5733	[120]	RIVET-POP
3.	8W-9683	[6]	TREAD
4.	2A-6779	[2]	PLATE
5.	8W-9682	[4]	TREAD
6.	8W-9659	[4]	TREAD
7.	5P-5898 BD		TREAD-NONSKID
8.	9D-9390	[2]	TREAD-NONSKID
9.	5P-5897 BD		TREAD-NONSKID
	B		USE AS REQUIRED
	D		ORDER BY THE METER

152-2128: TREAD GP-NON-SKID

TREAD GP-NON-SKID

152-2128 TREAD GP-NON-SKID
S/N 2BW570-UP
PART OF 170-3594 CHASSIS AR

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	379-8075	[6]	PLATE-TREAD
2.	5P-5898 BD		TREAD-NONSKID
3.	9D-9390	[2]	TREAD-NONSKID
4.	9M-5733 C	[56]	RIVET-POP
5.	5P-5897 BD		TREAD-NONSKID
6.	379-8077	[2]	PLATE-TREAD
7.	379-8074 C	[2]	PLATE-TREAD
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER

141-2107: VALVE GP-LUBE DISTRIBUTION

VALVE GP-LUBE DISTRIBUTION

141-2107 VALVE GP-LUBE DISTRIBUTION -2-INJECTOR
S/N 2BW1-1588
PART OF 8X-8270 LUBRICATION GP-AUTOMATIC, 358-5500 VALVE GP-LUBE DISTRIBUTION
ALSO AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5T-5045 J	[2]	INJECTOR GP-LUBRICATION
			(EACH INCLUDES)
2.	8X-1106	[1]	FITTING AS-GREASE (1/8-27-THD)
3.	153-6430	[1]	NUT
4.	191-0554	[2]	PACKING

			AVAILABLE REPAIR KIT(S):
	8W-2555 J	[1]	KIT-INJECTOR (LUBE)
			(INCLUDES PLUNGER, PISTON, ROD, SPRING & PACKING)
	J		KIT MARKED J SERVICES PART(S) MARKED J

269-5346: VALVE GP-LUBE DISTRIBUTION

VALVE GP-LUBE DISTRIBUTION

269-5346 VALVE GP-LUBE DISTRIBUTION -2-INJECTOR
S/N 2BW1-UP
PART OF 358-5501 VALVE GP-LUBE DISTRIBUTION
AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8X-1106	[2]	FITTING AS-GREASE (1/8-27-THD)
2.	307-3245	[2]	INJECTOR AS
			(EACH INCLUDES)
	444-6559	[1]	CAP
	449-3815	[1]	SCREW
	449-3816	[1]	LOCKNUT (7/16-27-THD)

269-5348: VALVE GP-LUBE DISTRIBUTION

VALVE GP-LUBE DISTRIBUTION

269-5348 VALVE GP-LUBE DISTRIBUTION -3-INJECTOR
S/N 2BW1-UP
PART OF 358-5501 VALVE GP-LUBE DISTRIBUTION
AN ATTACHMENT

Parts for your 789C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	307-3245	[3]	INJECTOR AS
			(EACH INCLUDES)
	444-6559	[1]	CAP
	449-3815	[1]	SCREW
	449-3816	[1]	LOCKNUT (7/16-27-THD)
2.	8X-1106	[3]	FITTING AS-GREASE (1/8-27-THD)

Information:

FRAME AND BODY

SUSPENSION GP

Operation and Maintenance Manual

Suspension Cylinder - Check
789C Off-Highway Truck

Suspension Head (Front) - Inspect
789C Off-Highway Truck

Suspension Cylinder Mounting - Inspect
789C Off-Highway Truck

Special Instruction

Off-Highway Tractor and Truck Front Strut Frame Casting Replacement{0374, 7050}
Off-Highway Tractor and Truck Front Strut Frame Casting Replacement{0374, 7050}

Servicing the Suspension Cylinders for Large Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7213}
Servicing the Suspension Cylinders for Large Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7213}

Procedure to Replace the 9T-2238 Valve As with a 238-9928 Valve As in the Suspension Group on Certain Off-Highway Trucks{7201, 7213}
Procedure to Replace the 9T-2238 Valve As with a 238-9928 Valve As in the Suspension Group on Certain Off-Highway Trucks{7201, 7213}

Procedure to Troubleshoot the Loss of Nitrogen Precharge or Oil from Suspension Cylinders {0756, 7200, 7201, 7201, 7201, 7213}
Procedure to Troubleshoot the Loss of Nitrogen Precharge or Oil from Suspension Cylinders {0756, 7200, 7201, 7201, 7201, 7213}

Procedure to Perform Ultrasonic Inspection (UT) on the Front Suspension Group of 785, 789 and 793 Off-Highway Trucks {0756, 0787, 7200, 7201}
Procedure to Perform Ultrasonic Inspection (UT) on the Front Suspension Group of 785, 789 and 793 Off-Highway Trucks {0756, 0787, 7200, 7201}

Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}
Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FRONT STRUT TO SPINDLE 1D-4643 RETAINER BOLTS ON CERTAIN 785C, 785D, 789C, AND 789D OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FRONT STRUT TO SPINDLE 1D-4643 RETAINER BOLTS ON CERTAIN 785C, 785D, 789C, AND 789D OFF-HIGHWAY TRUCKS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Some Rear Suspension Cylinders May Have Oversize Bores For The Eye Bearings
Some Rear Suspension Cylinders May Have Oversize Bores For The Eye Bearings

Procedure For Adjusting The Check Valve In The Suspension Cylinders On All Trucks That Are Equipped With TPMS
Procedure For Adjusting The Check Valve In The Suspension Cylinders On All Trucks That Are Equipped With TPMS

Proper Orientation Of Rear Suspension Pins On Large Off-Highway Trucks Is Required
Proper Orientation Of Rear Suspension Pins On Large Off-Highway Trucks Is Required

Pressure Sensor Gp (Suspension Cylinder) System Malfunction on Certain Off-Highway Trucks{7201}
Pressure Sensor Gp (Suspension Cylinder) System Malfunction on Certain Off-Highway Trucks{7201}

Specifications

Suspension Cylinder (Front)
789C Off-Highway Truck Suspension Cylinder

Suspension Cylinder (Rear)
789C Off-Highway Truck Suspension Cylinder

Valve (Suspension Cylinder Charging)
789C Off-Highway Truck Suspension Cylinder

Tool Operating Manual

Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}

148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}

270-8312 Strut Handler{0599, 0756, 7200, 7201}
270-8312 Strut Handler{0599, 0756, 7200, 7201}

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FRONT STRUT TO SPINDLE 1D-4643 RETAINER BOLTS ON CERTAIN 785C, 785D, 789C, AND 789D OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FRONT STRUT TO SPINDLE 1D-4643 RETAINER BOLTS ON CERTAIN 785C, 785D, 789C, AND 789D OFF-HIGHWAY TRUCKS

Service Letter-Asia

Systems Operation

Suspension Cylinder (Front)
789C Off-Highway Truck Suspension Cylinder

Suspension Cylinder (Rear)
789C Off-Highway Truck Suspension Cylinder

Reuse And Salvage Guidelines

Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}

Specifications for Rear Suspension Cylinder Components Used in Off-Highway Trucks {7201}
Specifications for Rear Suspension Cylinder Components Used in Off-Highway Trucks {7201}

Repair of Front Strut Support for Off-Highway Trucks {7051, 7201}
Repair of Front Strut Support for Off-Highway Trucks {7051, 7201}

Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}
Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}

Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}

Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}

Information Release Memo

EXPANSION OF REMAN UPGRADE-TO-NEW HYDRAULIC RODS AND CYLINDERS
EXPANSION OF REMAN UPGRADE-TO-NEW HYDRAULIC RODS AND CYLINDERS

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FRONT STRUT TO SPINDLE 1D-4643 RETAINER BOLTS ON CERTAIN 785C, 785D, 789C, AND 789D OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FRONT STRUT TO SPINDLE 1D-4643 RETAINER BOLTS ON CERTAIN 785C, 785D, 789C, AND 789D OFF-HIGHWAY TRUCKS

Testing and Adjusting

General Information
789C Off-Highway Truck Suspension Cylinder

Disassembly and Assembly

Wheel, Brake and Suspension (Front) - Remove
789C Off-Highway Truck Machine Systems

Wheel, Brake and Suspension (Front) - Install
789C Off-Highway Truck Machine Systems

Rear Suspension (Cylinder) - Remove
789C Off-Highway Truck Machine Systems

Rear Suspension (Cylinder) - Install
789C Off-Highway Truck Machine Systems

Valve (Suspension Cylinder Charging) - Remove
789C Off-Highway Truck Machine Systems

Valve (Suspension Cylinder Charging) - Install
789C Off-Highway Truck Machine Systems

Rear Suspension (Cylinder) - Assemble
789C Off-Highway Truck Machine Systems

Rear Suspension (Cylinder) - Disassemble
789C Off-Highway Truck Machine Systems

Valve (Suspension Cylinder Charging) - Disassemble
789C Off-Highway Truck Machine Systems

Valve (Suspension Cylinder Charging) - Assemble
789C Off-Highway Truck Machine Systems

Front Suspension (Cylinder) - Disassemble
789C Off-Highway Truck Machine Systems

Front Suspension (Cylinder) - Assemble
789C Off-Highway Truck Machine Systems

Front Suspension (Cylinder) - Remove
789C Off-Highway Truck Machine Systems

Front Suspension (Cylinder) - Install
789C Off-Highway Truck Machine Systems

Service Magazine

Proper Cylinder Eye And Rod Eye Diameters Ensure Bearing Retention In Suspension Cylinders {7213}
1999/07/12

Front Suspension Strut Plate Will Maintain Correct Position Of Retainers {7201}
1999/09/20

A New Valve Core With a Higher Pressure Rating Has Improved Service Life {7200}
2000/01/10

A New Nitrogen Charging Valve Is Available {7200, 7201, 7213}
2004/07/26

The Strut Charging Procedures Are Now Located In Special Instruction, SEHS9411 {7201}
2004/07/19

The Exterior Head Bolts on the Front Suspension Cylinders have a Different Torque Specification for Assembly and a Different Torque Specification for Inspection. {7200, 7201}
2005/04/04

Additions to the Maintenance Interval Schedule for Suspension Cylinders {7201, 7500}
2005/11/14

A New Seal Improves Wear on Rear Suspension Groups {7200, 7201, 7213}
2008/07/14

New Caulking Procedure for Front Suspension Group Heads {7201}
2009/01/19

A New Backup Ring Improves the Rear Suspension Group on Certain Off-Highway Trucks {7201, 7213}
2011/07/11

An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
2011/12/19

Improved Pressure Sensor Is Now Used on Suspension Systems on Certain Off-Highway Trucks {7200, 7213, 7494}
2012/08/27

The Procedure to Service the Suspension Cylinders for Large Off-Highway Trucks has been Updated {0756, 7200, 7201, 7201, 7201, 7213}
2015/05/04

Reman Upgrade-To-New Hydraulic Rods and Cylinders Now Available for Certain Off-Highway Trucks/Tractors, Quarry Trucks, Track-Type Tractors, Wheel Dozers, and Wheel Loaders {4303, 5102, 5104, 7201}
2015/05/28

New O-Ring Seal for the Large Off-Highway Trucks Rear Suspension Group are Available {7200, 7201, 7213, 7230}
New O-Ring Seal for the Large Off-Highway Trucks Rear Suspension Group are Available {7200, 7201, 7213, 7230}

Suspension Cylinder Charging Information has been Updated for Certain Large Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7201, 7213}
Suspension Cylinder Charging Information has been Updated for Certain Large Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7201, 7213}

A Procedure to Perform Ultrasonic Inspection (UT) on the Front Suspension Group of 785, 789 and 793 Off-Highway Trucks is Available {0756, 0787, 7200, 7201}
A Procedure to Perform Ultrasonic Inspection (UT) on the Front Suspension Group of 785, 789 and 793 Off-Highway Trucks is Available {0756, 0787, 7200, 7201}

A Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks is Available {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}
A Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks is Available {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}

The Front Suspension Mounting Group Bearing is Improved on Certain Large Off-Highway Trucks {7200}
The Front Suspension Mounting Group Bearing is Improved on Certain Large Off-Highway Trucks {7200}

Caterpillar Parts SIS Catalog 789C :

Truck sale:

Caterpillar 789C, Construction
- Articulated Dump Trucks (ADTs)
CATERPILLAR FINANCIAL SERVICES CORPORATION

316,250

Caterpillar 789C, Construction
- Articulated Dump Trucks (ADTs)
CATERPILLAR FINANCIAL SERVICES CORPORATION

CATERPILLAR 789C 2011
- OFF HIGHWAY TRUCKS
CARTER MACHINERY
United States

CATERPILLAR 789C 2012
- OFF HIGHWAY TRUCKS
CARTER MACHINERY
United States