AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-9356 ADAPTER GP-TIP S/N 3TZ1-UP PIN ON PART OF 159-8977, 159-8978, 209-5396, 209-5398 BUCKET GP-ROCK 994D


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP

WHEEL LOADER 994D WHEEL LOADER 3TZ
 994D WHEEL LOADER 3TZ00001-UP (MACHINE) POWERED BY 3516B Engine SEBP2793 994D 3TZ   (1998)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
ADAPTER GP-TIP
131-9356 ADAPTER GP-TIP
130-1124 ADAPTER-TIP
CLAMP GP-ADAPTER
168-0857 CLAMP GP-ADAPTER
CLAMP GP-ADAPTER
195-7197 CLAMP GP-ADAPTER
 

#SEBP27930960
 

131-9356: ADAPTER GP-TIP

131-9356 ADAPTER GP-TIP
S/N 3TZ1-UP
PIN ON
PART OF 159-8977, 159-8978, 209-5396, 209-5398 BUCKET GP-ROCK
i00894932 SEBP2793
1319356 ADAPTER GP-TIP Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-6783 [9] WEDGE  
2. 132-1075 [9] CLAMP AS  
3. 315-0160 [7] ADAPTER (2-STRAP, CENTER)  
4. 315-0161 [2] ADAPTER (2-STRAP, CORNER)  
 

#SEBP27930961
 

130-1124: ADAPTER-TIP

130-1124 ADAPTER-TIP
S/N 3TZ1-UP
PIN-0N
PART OF 159-8975, 209-5392, 209-5394 BUCKET GP-ROCK
i01048274 SEBP2793
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  136-6784 [6] ADAPTER-TIP  
  134-1787 [2] ADAPTER-CORNER  
  132-1075 [8] CLAMP AS  
  117-6783 [8] WEDGE  
 

#SEBP27930962
 

156-5963: BUCKET AS-COAL

156-5963 BUCKET AS-COAL
S/N 3TZ1-UP
30 CU M (40 CU YD)
PART OF 8X-0156 BUCKET GP-COAL
i00892277 SEBP2793
1565963 BUCKET AS-COAL Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
2. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-LH-INNER)  
3. 114-4272 [2] HINGE AS (TILT)(TILT)  
4. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-RH-INNER)  
5. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
6. 7I-5848 [1] EDGE AS  
  100-7416 [9] ADAPTER-STRAP  
7. 121-2364 [1] CORNER (RH)  
8. 121-2367 [1] CORNER (LH)  
9. 134-2972 [2] PLATE-WEAR (LH)  
10. 134-2973 [2] PLATE-WEAR (RH)  
11. 178-6247 [2] PLATE  
12. 178-6249 [2] BLOCK  
 

#SEBP27930963
 

207-2883: BUCKET AS-COAL

207-2883 BUCKET AS-COAL
S/N 3TZ1-UP
31 CU M (41.0 CU YD)
PART OF 207-2882 BUCKET GP-COAL
i01793971 SEBP2793
2072883 BUCKET AS-COAL Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
2. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-LH-INNER)  
3. 114-4272 [2] HINGE AS (TILT)(TILT)  
4. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-RH-INNER)  
5. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
6. 7I-5848 [1] EDGE AS  
  100-7416 [9] ADAPTER-STRAP  
7. 121-2364 [1] CORNER (RH)  
8. 121-2367 [1] CORNER (LH)  
9. 134-2972 [2] PLATE-WEAR (LH)  
10. 134-2973 [2] PLATE-WEAR (RH)  
11. 178-6247 [2] PLATE  
12. 178-6249 [2] BLOCK  
 

#SEBP27930964
 

121-2360: BUCKET AS-ROCK

121-2360 BUCKET AS-ROCK
S/N 3TZ1-UP
16 CU M (21 CU YD). BOLT-ON SEGMENTS
PART OF 8X-0153 BUCKET GP-ROCK
i00664979 SEBP2793
1212360 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
2. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-LH-INNER)  
3. 114-4272 [2] HINGE AS (TILT)(TILT)  
4. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-RH-INNER)  
5. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
6. 121-2104 [1] EDGE AS-CUTTING  
6A. 6I-8804 [8] ADAPTER  
8. 121-2378 [2] PLATE-WEAR  
9. 134-2972 C [2] PLATE-WEAR (LH)  
10. 134-2973 C [2] PLATE-WEAR (RH)  
11. 143-9200 C [2] PLATE  
12. 178-6247 [2] PLATE  
13. 178-6249 [2] BLOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27930965
 

121-2361: BUCKET AS-ROCK

121-2361 BUCKET AS-ROCK
S/N 3TZ1-UP
18 CU M (23 CU YD). BOLT-ON SEGMENTS
PART OF 8X-0154 BUCKET GP-ROCK
i00664977 SEBP2793
1212361 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
2. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-LH-INNER)  
3. 114-4272 [2] HINGE AS (TILT)(TILT)  
4. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-RH-INNER)  
5. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
6. 134-2972 C [2] PLATE-WEAR (LH)  
7. 121-2104 [1] EDGE AS-CUTTING  
  6I-8804 [8] ADAPTER  
8. 134-2973 C [2] PLATE-WEAR (RH)  
9. 143-6755 C [2] PLATE  
10. 178-6247 [2] PLATE  
11. 178-6249 [2] BLOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27930966
 

121-8889: BUCKET AS-ROCK

121-8889 BUCKET AS-ROCK
S/N 3TZ1-UP
16 CU M (21 CU YD)
PART OF 101-9097 BUCKET GP-ROCK
i00664978 SEBP2793
1218889 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-6659 [1] EDGE AS  
  6I-8804 [9] ADAPTER  
2. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-RH-INNER)  
3. 121-8892 [14] PLATE  
4. 114-4272 [2] HINGE AS (TILT)(TILT)  
5. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-LH-INNER)  
6. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
7. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
8. 134-2972 [2] PLATE-WEAR (LH)  
9. 143-9200 [2] PLATE  
10. 134-2973 [2] PLATE-WEAR (RH)  
11. 178-6247 [2] PLATE  
12. 178-6249 [2] BLOCK  
 

#SEBP27930967
 

121-8890: BUCKET AS-ROCK

121-8890 BUCKET AS-ROCK
S/N 3TZ1-UP
18 CU M (23 CU YD)
PART OF 101-9098 BUCKET GP-ROCK
i00664970 SEBP2793
1218890 BUCKET AS-ROCK Parts scheme 1218890 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-4272 C [2] HINGE AS (TILT)(TILT)  
2. 121-6659 [1] EDGE AS  
2A. 6I-8804 [9] ADAPTER  
3. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-LH-INNER)  
4. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-RH-INNER)  
5. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
6. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
7. 134-2972 C [2] PLATE-WEAR (LH)  
8. 134-2973 C [2] PLATE-WEAR (RH)  
9. 161-6358 [2] PLATE  
10. 161-8883 [2] PLATE-WEAR  
11. 161-9129 [1] PLATE  
12. 178-6249 [2] BLOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP27930968
 

144-2844: BUCKET AS-ROCK

144-2844 BUCKET AS-ROCK
S/N 3TZ1-UP
14 CU M (18 CU YD)
PART OF 8X-0152 BUCKET GP-ROCK
i00817959 SEBP2793
1442844 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
2. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-LH-INNER)  
3. 114-4272 [2] HINGE AS (TILT)(TILT)  
4. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-RH-INNER)  
5. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
6. 134-2972 [2] PLATE-WEAR (LH)  
7. 121-2104 [1] EDGE AS-CUTTING  
7A. 6I-8804 [8] ADAPTER  
8. 134-2973 [2] PLATE-WEAR (RH)  
9. 143-9200 [2] PLATE  
10. 155-9604 [2] PLATE  
11. 178-6247 [2] PLATE  
12. 178-6249 [2] BLOCK  
 

#SEBP27930969
 

168-9236: BUCKET AS-ROCK

168-9236 BUCKET AS-ROCK
S/N 3TZ1-UP
16 CU M (21 CU YD)
PART OF 159-8975 BUCKET GP-ROCK
FOR USE WITH MECHANICALLY ATTACHED WEAR PLATE SYSTEM
i01113841 SEBP2793
1689236 BUCKET AS-ROCK Parts scheme 1689236 BUCKET AS-ROCK Parts scheme
  For full view, you need register

Parts for your 994D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-0856 [1] HINGE AS (LIFT, OUTER, RH)(LIFT-RH-OUTER)  
2. 195-0858 [1] HINGE AS (LIFT, OUTER, LH)(LIFT-LH-OUTER)  
3. 114-4272 [2] HINGE AS (TILT)(TILT)  
4. 121-2371 [1] PLATE  
5. 122-0340 [1] HINGE AS (LIFT, INNER, RH)(LIFT-LH-INNER)  
6. 122-0342 [1] HINGE AS (LIFT, INNER, LH)(LIFT-RH-INNER)  
7. 129-9673 Y [1] EDGE AS-BASE  
8. 134-2972 [2] PLATE-WEAR (LH)  
9. 134-2973 [2] PLATE-WEAR (RH)  
10. 138-0050 [26] BASE-WEAR PLATE  
11. 143-9200 [2] PLATE  
12. 135-9732 [1] CORNER (LH)  
13. 164-5490 [2] BAR  
14. 135-9731 [1] CORNER (RH)  
15. 178-6247 [2] PLATE  
16. 178-6249 [2] BLOCK  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Bucket Wear Plates - Inspect/Replace
994D Wheel Loader
Bucket Cutting Edges - Inspect/Replace
994D Wheel Loader
Bucket Tips - Inspect/Replace
994D Wheel Loader
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING MECHANICALLY ATTACHED ADAPTERS ON CERTAIN 994 WHEEL LOADER BUCKETS
PRODUCT SUPPORT PROGRAM FOR REPLACING MECHANICALLY ATTACHED ADAPTERS ON CERTAIN 994 WHEEL LOADER BUCKETS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Ground Engaging Tool Torques
994D Wheel Loader Hydraulic System
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING MECHANICALLY ATTACHED ADAPTERS ON CERTAIN 994 WHEEL LOADER BUCKETS
PRODUCT SUPPORT PROGRAM FOR REPLACING MECHANICALLY ATTACHED ADAPTERS ON CERTAIN 994 WHEEL LOADER BUCKETS
Service Letter-Asia
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING MECHANICALLY ATTACHED ADAPTERS ON CERTAIN 994 WHEEL LOADER BUCKETS
PRODUCT SUPPORT PROGRAM FOR REPLACING MECHANICALLY ATTACHED ADAPTERS ON CERTAIN 994 WHEEL LOADER BUCKETS
Service Magazine
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
New Wear Plates are Available {6820}
2002/03/18
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correction to Operation and Maintenance Manual , "Bucket Tips - Inspect/Replace" {6805}
2004/04/19
The Proper Lifting Procedure for GET Tips with Lugs {6805}
2004/03/15
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Improved Tip Adapters with Larger Weld Grooves {0751}
2006/08/28
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New CapSure Tip Assemblies Are Now Available for J800 Adapters {6805}
2009/08/31
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/08/02

Caterpillar Parts SIS Catalog 994D :

WIPER PIVOT GP
6V-6561 WIPER PIVOT GP
WIPER PIVOT GP
101-0742 WIPER PIVOT GP
WIPER GP-WINDOW
3T-7062 WIPER GP-WINDOW
WIPER & WASHER GP-WINDOW
8X-3534 WIPER & WASHER GP-WINDOW
WIPER & WASHER GP-WINDOW
8X-1751 WIPER & WASHER GP-WINDOW
WIPER & WASHER GP-WINDOW
8X-1751 WIPER & WASHER GP-WINDOW
WINDOW GP-SLIDING
9C-5875 WINDOW GP-SLIDING
WINDOW GP-SLIDING
104-7325 WINDOW GP-SLIDING
130-1124 ADAPTER-TIP
BUCKET AS-COAL
156-5963 BUCKET AS-COAL
BUCKET AS-COAL
207-2883 BUCKET AS-COAL
BUCKET AS-ROCK
121-2360 BUCKET AS-ROCK
BUCKET AS-ROCK
121-2361 BUCKET AS-ROCK
BUCKET AS-ROCK
121-8889 BUCKET AS-ROCK
BUCKET AS-ROCK
121-8890 BUCKET AS-ROCK
BUCKET AS-ROCK
144-2844 BUCKET AS-ROCK

Truck sale:

CATERPILLAR 994D 2001
 
CATERPILLAR 994D 2001
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
 
Call 
2005 CAT 994D

Finning Chile S.A
SANTIAGO, ??, Chile
 
 
CATERPILLAR 994D 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FINNING CHILE S.A.
CATERPILLAR 994D 2001
 
CATERPILLAR 994D 2001
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
RING POWER CORP
Florida United States
 
Call 
2005 CAT 994D

Finning Chile S.A
SANTIAGO, ??, Chile
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.