AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-8794 DRIVE GP-GOV & TRANSFER PUMP S/N 4TF40050-UP PART OF 131-4852 GOVERNOR GP-UNIT INJECTOR ALSO AN ATTACHMENT 953C


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
KIT-FUEL SYSTEM PARTS
LINES GP-FUEL
LINES GP-GOVERNOR OIL

TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN01750-UP (MACHINE) POWERED BY 3116 Engine SEBP2794 953C 2ZN   (1996)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
129-1209 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-7897 GOVERNOR GP-UNIT INJECTOR
 

#SEBP27940110
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 4TF40050-UP
PART OF 131-4852 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00389933 SEBP2794
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP27940111
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 4TF40050-UP
PART OF 129-1209 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00412446 SEBP2794
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP27940112
 

143-4689: FILTER GP-FUEL

143-4689 FILTER GP-FUEL
S/N 2ZN1750-UP
CANNOT BE USED WITH MACHINES EQUIPPED WITH SERIES FUEL FILTERS
FIELD INSTALLATION
i00659756 SEBP2794
1434689 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
2. 120-0201 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
3. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
4. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
5. 6N-4414 [1] COVER-FILTER BASE  
6. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
7. 8T-4971 M [1] BOLT (M6X1X30-MM)  
8. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
9. 8L-3282 [2] CONNECTOR  
10. 3J-1907 [7] SEAL-O-RING  
11. 129-1090 [2] VALVE-DRAIN  
12. 003-7764 [2] END-HOSE  
13. 5P-4961 [2] CLAMP-HOSE  
14. 103-2529 [2] HOSE (90CM EACH)  
15. 3E-7410 [2] TEE  
16. 6V-8636 [1] CONNECTOR  
17. 6V-9001 [2] ELBOW  
18. 5P-1318 [1] ADAPTER  
19. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
20. 7X-7729 [3] WASHER (11X25X3-MM THK)  
21. 143-0915 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
22. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
23. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
24. 131-8594 I [1] HOSE AS  
25. 6V-8397 [4] SEAL-O-RING  
26. 111-6923 I [1] HOSE AS  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [1] NUT (M10X1.5-THD)  
29. 8M-2773 [1] CLIP (LOOP)  
30. 1J-9671 [1] SEAL-O-RING  
31. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
32. 6V-5817 D CONDUIT-FLEXIBLE (26.1-MM ID, SPLIT)(.3M)  
   
  4P-6379 F [1] FILM-IDENTIFICATION (FUEL FILTER)  
  D   ORDER BY THE METER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP27940113
 

129-1209: GOVERNOR GP-UNIT INJECTOR

129-1209 GOVERNOR GP-UNIT INJECTOR
S/N 4TF40050-UP
PART OF 147-1753, 147-1977 ENGINE AR
ALSO AN ATTACHMENT
i00522578 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  131-7897 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940114
 

131-4852: GOVERNOR GP-UNIT INJECTOR

131-4852 GOVERNOR GP-UNIT INJECTOR
S/N 4TF40050-UP
PART OF 131-7897 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00509760 SEBP2794
1314852 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] PLATE  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE CAM  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT (5/16-18-THD)  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 4P-4000 [1] SPRING-LEVER  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [2] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP27940115
 

131-7897: GOVERNOR GP-UNIT INJECTOR

131-7897 GOVERNOR GP-UNIT INJECTOR
S/N 4TF40050-UP
PART OF 129-1209 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00511408 SEBP2794
1317897 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-4852 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 131-7887 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940116
 

390-9331: KIT-INJECTOR

390-9331 KIT-INJECTOR
S/N 2ZN1750-UP
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@147-1977@@@@@
FIELD INSTALLATION
i05934802 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8718 [1] SEAL-O-RING  
  125-8274 [1] SEAL-O-RING  
 

#SEBP27940117
 

143-9263: LINES GP-FUEL

143-9263 LINES GP-FUEL
S/N 2ZN1750-UP
PART OF 145-6433 CHASSIS AR
i00603954 SEBP2794
1439263 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4961 [1] CLAMP-HOSE  
2. 8T-6907 [2] VALVE-BALL  
3. 112-6531 [1] TUBE AS  
4. 112-6532 [1] TUBE AS  
5. 112-6533 I [1] HOSE AS  
6. 112-6534 I [1] HOSE AS  
7. 142-8459 I [1] HOSE AS  
8. 142-8460 I [1] HOSE AS  
9. 164-5562 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  5P-1046 [1] CONNECTOR  
10. 148-8332 [1] ADAPTER AS  
  1J-9671 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-5043 [1] ADAPTER  
11. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
12. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
13. 153-6248 [1] ADAPTER AS  
  6V-8397 [1] SEAL-O-RING  
  8T-6663 [1] ADAPTER-PORT  
14. 3J-1907 [2] SEAL-O-RING  
15. 3W-7200 [1] TUBE AS  
16. 5K-8451 [2] CLIP (LOOP)  
17. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
18. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 5P-8167 [6] BOLT (3/8-16X0.625-IN)  
20. 5P-9297 [3] CLIP (LOOP)  
21. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
22. 6V-3265 [4] CLIP  
23. 6V-8397 [5] SEAL-O-RING  
24. 7S-4244 [3] CLIP  
25. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 9M-8406 [2] CLIP (LOOP)  
27. 5P-1442 E HOSE (61CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP27940118
 

134-9521: LINES GP-FUEL FILTER

134-9521 LINES GP-FUEL FILTER
S/N 4TF40050-UP
PART OF 147-1753, 147-1977 ENGINE AR
ALSO AN ATTACHMENT
i00566333 SEBP2794
1349521 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1102 Y [1] BASE GP-FUEL FILTER  
2. 129-2145 [1] TUBE AS  
3. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [11] SEAL-O-RING  
6. 129-1672 [1] BRACKET  
7. 6V-8397 [6] SEAL-O-RING  
8. 7X-2459 [1] ADAPTER-TEE  
9. 6V-6317 M [6] BOLT (M10X1.5X20-MM)  
10. 9S-4191 [3] PLUG (9/16-18-THD)  
11. 5F-7054 [1] SEAL-O-RING  
12. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
13. 7E-5190 [1] TUBE AS  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 8T-0151 [1] ADAPTER  
16. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
17. 3N-3252 [1] SPRING  
18. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
19. 5P-7813 [1] SEAL-O-RING  
20. 6V-8781 [1] TEE  
21. 129-2146 [1] TUBE AS  
22. 134-2882 [1] TUBE AS  
23. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
24. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
25. 141-8275 [2] VALVE-DRAIN (FUEL)  
26. 1P-4278 [2] CLAMP-HOSE  
27. 103-2529 E HOSE (60CM)  
28. 6V-8636 [2] CONNECTOR  
29. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
30. 6V-5217 M [4] BOLT (M8X1.25X20-MM)  
31. 9S-1350 [1] CLIP  
32. 5M-5689 [2] CLAMP  
33. 8T-4971 M [1] BOLT (M6X1X30-MM)  
34. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
35. 6V-8225 M [1] NUT (M6X1-THD)  
36. 151-4537 [1] BRACKET AS  
37. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940119
 

7W-8434: LINES GP-GOVERNOR OIL

7W-8434 LINES GP-GOVERNOR OIL
S/N 4TF40050-UP
PART OF 129-1209 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00416507 SEBP2794
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 3J-7354 [2] SEAL-O-RING  
3. 6V-8647 [1] CONNECTOR  
4. 7W-0367 [1] TUBE AS  
5. 4J-5477 [2] SEAL-O-RING  
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 953C :

CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
124-0555 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
124-0555 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
TURBOCHARGER GP
129-1148 TURBOCHARGER GP
TURBOCHARGER GP
125-1123 TURBOCHARGER GP
PRECLEANER GP
121-7746 PRECLEANER GP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
143-4689 FILTER GP-FUEL
129-1209 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-7897 GOVERNOR GP-UNIT INJECTOR
390-9331 KIT-INJECTOR
LINES GP-FUEL
143-9263 LINES GP-FUEL
LINES GP-FUEL FILTER
134-9521 LINES GP-FUEL FILTER

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.