HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC GP
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP27940360
1U-0418: CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
S/N 2ZN1750-5607
139.7 MM (5.5 IN.) BORE X 478.0 MM (18.8 IN.) STROKE
PART OF 145-6435 HYDRAULIC AR
S/N 2ZN1750-5607
139.7 MM (5.5 IN.) BORE X 478.0 MM (18.8 IN.) STROKE
PART OF 145-6435 HYDRAULIC AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0539 | [1] | CYLINDER AS | |
| 2. | 3G-5111 | [1] | BUSHING | |
| 3. | 6E-5188 | [1] | WASHER (57.53X89.45X13-MM THK) | |
| 4. | 3J-6899 | [1] | LOCKNUT (2-1/4-12-THD) | |
| 5. | 7J-1731 | [1] | RING-WEAR | |
| 6. | 4T-5173 | [1] | SEAL | |
| 7. | 1D-4638 | [2] | BOLT (1-8X3.5-IN) | |
| 8. | 5P-8250 | [4] | WASHER (28X49X5-MM THK) | |
| 9. | 167-2319 | [1] | SEAL-U-CUP | |
| 10. | 167-2469 | [1] | SEAL-WIPER | |
| 11. | 6E-5187 | [1] | ROD AS | |
| 12. | 3G-5111 | [1] | BUSHING | |
| 13. | 121-7926 C | [1] | HEAD | |
| 14. | 167-2208 | [1] | SEAL AS-BUFFER | |
| 15. | 8J-1688 C | [1] | SEAL-O-RING | |
| 8J-1689 C | [1] | RING-BACKUP | ||
| 16. | 1U-0533 | [1] | PISTON | |
| 17. | 1D-4642 | [2] | BOLT (1-8X5-IN) | |
| 8G-4080 | [2] | SPACER (31.8X50.8X38-MM THK) | ||
| 18. | 8C-9153 | [1] | RING-WEAR | |
| 19. | 8T-8376 | [1] | SEAL-HEAD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP27940361
224-5730: CYLINDER GP-TILT
224-5730 CYLINDER GP-TILT
S/N 2ZN5589-UP
139.7-MM(5.5-IN) BORE X 478-MM(18.8-IN) STROKE
PART OF 145-6435 HYDRAULIC AR
S/N 2ZN5589-UP
139.7-MM(5.5-IN) BORE X 478-MM(18.8-IN) STROKE
PART OF 145-6435 HYDRAULIC AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 224-5731 | [1] | CYLINDER AS | |
| 3G-5111 | BUSHING | |||
| 2. | 3J-6899 | [1] | LOCKNUT (2-1/4-12-THD) | |
| 3. | 7J-1731 | [1] | RING-WEAR | |
| 4. | 4T-5173 | [1] | SEAL | |
| 5. | 1U-0533 | [1] | PISTON | |
| 6. | 6E-5188 | [1] | WASHER (57.53X89.45X13-MM THK) | |
| 7. | 8J-1688 | [1] | SEAL-O-RING | |
| 8. | 8J-1689 | [1] | RING-BACKUP | |
| 9. | 8T-8376 | [1] | SEAL-HEAD | |
| 10. | 224-5733 | [1] | HEAD | |
| 11. | 6E-5187 | [1] | ROD AS | |
| 11A. | 3G-5111 | [1] | BUSHING | |
| 12. | 1D-4638 | [2] | BOLT (1-8X3.5-IN) | |
| 13. | 5P-8250 | [4] | WASHER (28X49X5-MM THK) | |
| 14. | 1D-4642 | [2] | BOLT (1-8X5-IN) | |
| 15. | 8G-4080 | [2] | SPACER (31.8X50.8X38-MM THK) | |
| 16. | 8C-9153 | [1] | RING-WEAR | |
| 17. | 167-2208 | [1] | SEAL AS-BUFFER | |
| 18. | 167-2319 | [1] | SEAL-U-CUP | |
| 19. | 225-3284 | [1] | SEAL-WIPER | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP27940362
145-6435: HYDRAULIC AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 145-6461 Y | [1] | CONTROL GP-BUCKET | ||
| 9T-3625 Y | [2] | CYLINDER GP-LIFT | ||
| 1U-0418 Y | [1] | CYLINDER GP-TILT | ||
| S/N 2ZN1750-5607 | ||||
| 224-5730 Y | [1] | CYLINDER GP-TILT | ||
| S/N 2ZN5608-UP | ||||
| 143-3457 Y | [1] | KICKOUT & POSITIONER GP | ||
| 132-4670 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 141-9357 Y | [1] | LINES GP-PILOT | ||
| 110-1390 Y | [1] | LINES GP-PUMP | ||
| S/N 2ZN1750-4055 | ||||
| 176-9878 Y | [1] | LINES GP-PUMP | ||
| S/N 2ZN4056-UP | ||||
| 7P-2640 Y | [1] | LINES GP-TILT CYLINDER | ||
| S/N 2ZN1750-5608 | ||||
| 221-6727 Y | [1] | LINES GP-TILT CYLINDER | ||
| S/N 2ZN5609-UP | ||||
| 151-1042 Y | [1] | MOUNTING GP-HYDRAULIC TANK | ||
| 149-4699 Y | [1] | PUMP GP-VANE | ||
| S/N 2ZN1750-4055 | ||||
| Y | [1] | PUMP GP-VANE | ||
| S/N 2ZN4056-UP | ||||
| 144-8142 Y | [1] | TANK & VALVE GP-HYDRAULIC | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940363
146-8267: HYDRAULIC AR
146-8267 HYDRAULIC AR -3 VALVE
S/N 2ZN1750-UP
SINGLE LEVER WITH DIVERTER AND FRONT & REAR LINES
AN ATTACHMENT
S/N 2ZN1750-UP
SINGLE LEVER WITH DIVERTER AND FRONT & REAR LINES
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 141-9359 Y | [1] | CONTROL GP-DIVERTER | ||
| 6V-2435 | [1] | FILM-INSTRUCTION (RIPPER) | ||
| 6V-2436 | [1] | FILM-INSTRUCTION (MULTIPURPOSE BUCKET) | ||
| 125-6578 Y | [1] | LINES GP-ATTACHMENT | ||
| 141-9358 Y | [1] | LINES GP-AUXILIARY HYDRAULIC | ||
| 7P-2655 Y | [1] | LINES GP-FRONT | ||
| 150-9323 Y | [1] | LINES GP-REAR ATTACHMENT | ||
| 144-8140 Y | [1] | TANK & VALVE GP-HYDRAULIC | ||
| 146-5023 Y | [1] | VALVE GP-PILOT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940364
146-8268: HYDRAULIC AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS#SEBP27940365
146-8269: HYDRAULIC AR
146-8269 HYDRAULIC AR -3 VALVE
S/N 2ZN1750-UP
SINGLE LEVER WITH FRONT LINES
AN ATTACHMENT
S/N 2ZN1750-UP
SINGLE LEVER WITH FRONT LINES
AN ATTACHMENT
For full view, you need register
#SEBP27940366
146-8270: HYDRAULIC AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-4143 | [4] | BOLT-LOCKING (1/2-13X2-IN) | ||
| 6J-0545 | [2] | COVER | ||
| 141-9358 Y | [1] | LINES GP-AUXILIARY HYDRAULIC | ||
| 1P-3702 | [2] | SEAL-RECTANGULAR | ||
| 144-8140 Y | [1] | TANK & VALVE GP-HYDRAULIC | ||
| 136-4532 | [1] | TUBE AS | ||
| 146-5023 Y | [1] | VALVE GP-PILOT | ||
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940367
146-8271: HYDRAULIC AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6V-2453 | [1] | FILM-INSTRUCTION (SGL LEVER IMPLEMENT CONTROL) | ||
| 6V-2436 | [1] | FILM-INSTRUCTION (MULTIPURPOSE BUCKET) | ||
| 125-6578 Y | [1] | LINES GP-ATTACHMENT | ||
| 141-9358 Y | [1] | LINES GP-AUXILIARY HYDRAULIC | ||
| 7P-2655 Y | [1] | LINES GP-FRONT | ||
| 144-8140 Y | [1] | TANK & VALVE GP-HYDRAULIC | ||
| 146-5021 Y | [1] | VALVE GP-PILOT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940368
146-8272: HYDRAULIC AR
146-8272 HYDRAULIC AR -3 VALVE
S/N 2ZN1750-UP
SINGLE LEVER WITH REAR LINES
AN ATTACHMENT
S/N 2ZN1750-UP
SINGLE LEVER WITH REAR LINES
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS#SEBP27940369
146-8273: HYDRAULIC AR
146-8273 HYDRAULIC AR -3 VALVE
S/N 2ZN1750-UP
2 LEVERS WITH DIVERTER AND FRONT & REAR LINES
AN ATTACHMENT
S/N 2ZN1750-UP
2 LEVERS WITH DIVERTER AND FRONT & REAR LINES
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7P-2655 Y | [1] | LINES GP-FRONT | ||
| 125-6578 Y | [1] | LINES GP-ATTACHMENT | ||
| 150-9323 Y | [1] | LINES GP-REAR ATTACHMENT | ||
| 141-9358 Y | [1] | LINES GP-AUXILIARY HYDRAULIC | ||
| 141-9359 Y | [1] | CONTROL GP-DIVERTER | ||
| 144-8140 Y | [1] | TANK & VALVE GP-HYDRAULIC | ||
| 146-5021 Y | [1] | VALVE GP-PILOT | ||
| 6V-2453 | [1] | FILM-INSTRUCTION (SGL LEVER IMPLEMENT CONTROL) | ||
| 6V-2435 | [1] | FILM-INSTRUCTION (RIPPER) | ||
| 6V-2436 | [1] | FILM-INSTRUCTION (MULTIPURPOSE BUCKET) | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Front Guard Changed To Prevent Interference With Tilt Cylinder
Front Guard Changed To Prevent Interference With Tilt Cylinder
Front Guard Changed To Prevent Interference With Tilt Cylinder
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
