WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP27940530
7T-9325: EDGE GP-CUTTING
7T-9325 EDGE GP-CUTTING
S/N 2ZN1750-UP
25-MM THICK
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET, TOOTH GP
CANNOT BE USED WITH FLUSH MOUNTED TEETH BUCKET OR FULL LENGTH CUTTING EDGE
AN ATTACHMENT
S/N 2ZN1750-UP
25-MM THICK
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET, TOOTH GP
CANNOT BE USED WITH FLUSH MOUNTED TEETH BUCKET OR FULL LENGTH CUTTING EDGE
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS#SEBP27940531
5Q-5762: GUARD AS-TRASH
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 198-8399 Y | [1] | BUCKET GP-MULTIPURPOSE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940532
519-8491: GUARD-BUCKET CORNER
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP27940533
519-8492: GUARD-BUCKET CORNER
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP27940534
186-2712: KIT-BUCKET
186-2712 KIT-BUCKET
S/N 2ZN1750-UP
PROVIDES ADDITIONAL GUSSETS FOR GENERAL PURPOSE BUCKETS
FOR USE WITH @@@@@ 8Y-9100@@@@@, @@@@@ 8Y-9101@@@@@
FIELD INSTALLATION
S/N 2ZN1750-UP
PROVIDES ADDITIONAL GUSSETS FOR GENERAL PURPOSE BUCKETS
FOR USE WITH @@@@@ 8Y-9100@@@@@, @@@@@ 8Y-9101@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS#SEBP27940535
3G-1349: MOUNTING GP-RIPPER
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-1066 | [2] | SPACER (34X90X18-MM THK) | |
| 2. | 3G-1528 | [2] | BLOCK AS | |
| (EACH INCLUDES) | ||||
| 2A. | 3G-2580 | [1] | BEARING | |
| 3. | 3G-1582 | [2] | PIN | |
| 4. | 7B-2289 | [2] | BOLT (1-1/4-12X2.25-IN) | |
| 5. | 9G-1216 | [2] | SPACER (17X94X12-MM THK) | |
| 6. | 2K-0337 | [8] | LOCKNUT (3/4-16-THD) | |
| 7. | 7K-3422 | [8] | STUD-TAPERLOCK (3/4-16, 3/4-10X5.512-IN) | |
| 8. | 7K-9205 | [4] | SEAL-LIP TYPE | |
| 9. | 8T-9393 | [2] | BOLT (5/8-11X1.5-IN) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
#SEBP27940536
155-1518: RIPPER AR
155-1518 RIPPER AR
S/N 7LP1-UP
FOR USE WITH 3RD VALVE CONTROL AND REAR HYDRAULIC LINES
CANNOT BE USED WITH BUMPER
AN ATTACHMENT
S/N 7LP1-UP
FOR USE WITH 3RD VALVE CONTROL AND REAR HYDRAULIC LINES
CANNOT BE USED WITH BUMPER
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | RIPPER AR | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940537
156-5736: RIPPER AR
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3G-5128 Y | [1] | CYLINDER & MTG GP-RIPPER | ||
| 151-2564 Y | [1] | LINES GP-RIPPER | ||
| 3G-1349 Y | [1] | MOUNTING GP-RIPPER | ||
| 9J-4329 Y | [1] | RIPPER GP | ||
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27940538
9J-4329: RIPPER GP
For full view, you need register
#SEBP27940539
8E-3751: TIP GP-LONG
8E-3751 TIP GP-LONG -J-300, HEAVY-DUTY
S/N 2ZN1750-5153
PART OF 133-0686 TOOTH GP-LONG
AN ATTACHMENT
S/N 2ZN1750-5153
PART OF 133-0686 TOOTH GP-LONG
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SISInformation:
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
Operation and Maintenance Manual
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
