AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-3751 TIP GP-LONG -J-300, HEAVY-DUTY S/N 2ZN5154-UP PART OF 133-0686 TOOTH GP-LONG AN ATTACHMENT 953C


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)

TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN01750-UP (MACHINE) POWERED BY 3116 Engine SEBP2794 953C 2ZN   (1996)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
GUARD-BUCKET CORNER
519-8492 GUARD-BUCKET CORNER
TIP GP-LONG
8E-3751 TIP GP-LONG
TIP GP-LONG
8E-3751 TIP GP-LONG
8Y-9567 TIP GP-LONG
TIP GP-LONG
9J-3167 TIP GP-LONG
8Y-9566 TIP GP-SHORT
 

#SEBP27940540
 

8E-3751: TIP GP-LONG

8E-3751 TIP GP-LONG -J-300, HEAVY-DUTY
S/N 2ZN5154-UP
PART OF 133-0686 TOOTH GP-LONG
AN ATTACHMENT
i01803613 SEBP2794
8E3751 TIP GP-LONG Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3308 [1] PIN  
2. 9N-4302 [1] TIP-LONG  
3. 8E-6259 [1] RETAINER AS  
 

#SEBP27940541
 

8Y-9567: TIP GP-LONG

8Y-9567 TIP GP-LONG
S/N 2ZN1750-UP
FOR USE WITH FLUSH MOUNTED TEETH BUCKET
AN ATTACHMENT
i00417286 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9J-3167 Y [8] TIP GP-LONG (J-300)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940542
 

9J-3167: TIP GP-LONG

9J-3167 TIP GP-LONG -J-300
S/N 2ZN1750-UP
PART OF 8Y-9567 TIP GP-LONG, 1U-0629 TOOTH GP-LONG
AN ATTACHMENT
i00433007 SEBP2794
9J3167 TIP GP-LONG Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3308 [1] PIN  
2. 8E-6259 [1] RETAINER AS  
3. 1U-3302 [1] TIP-LONG  
 

#SEBP27940543
 

8Y-9566: TIP GP-SHORT

8Y-9566 TIP GP-SHORT
S/N 2ZN1750-UP
FOR USE WITH FLUSH MOUNTED TEETH BUCKET
AN ATTACHMENT
i00417284 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9J-3175 Y [8] TIP GP-SHORT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940544
 

9J-3175: TIP GP-SHORT

9J-3175 TIP GP-SHORT -J-300
S/N 2ZN1750-UP
PART OF 8Y-9566 TIP GP-SHORT, 1U-0630 TOOTH GP-SHORT
AN ATTACHMENT
i00433037 SEBP2794
9J3175 TIP GP-SHORT Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3308 [1] PIN  
2. 8E-6259 [1] RETAINER AS  
3. 1U-3301 [1] TIP-SHORT  
 

#SEBP27940545
 

133-0686: TOOTH GP-LONG

133-0686 TOOTH GP-LONG -J-300
S/N 2ZN1750-UP
FOR USE WITH @@@@@ 8Y-9100@@@@@, GENERAL PURPOSE, MULTIPURPOSE BUCKETS
AN ATTACHMENT
i00835404 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-3751 Y [8] TIP GP-LONG  
   
  1U-0307 [6] ADAPTER-STRAP  
  3G-4308 [1] ADAPTER-STRAP (LH)  
  3G-4309 [1] ADAPTER-STRAP (RH)  
  6V-6535 [2] BOLT-PLOW (1-1/4-7X3.74-IN)  
  8J-2928 [12] BOLT-PLOW (1-8X3.75-IN)  
  5P-8362 [2] NUT (1-1/4-7-THD)  
  8J-2933 [12] NUT (1-8-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940546
 

1U-0629: TOOTH GP-LONG

1U-0629 TOOTH GP-LONG
S/N 2ZN1750-UP
FOR USE WITH MACHINES EQUIPPED WITH MULTIPURPOSE BUCKET
CANNOT BE USED WITH FULL LENGTH CUTTING EDGE
AN ATTACHMENT
i00353670 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9J-3167 Y [8] TIP GP-LONG (J-300)  
   
  1U-0307 [6] ADAPTER-STRAP  
  3G-4308 [1] ADAPTER-STRAP (LH)  
  3G-4309 [1] ADAPTER-STRAP (RH)  
  6V-6535 [2] BOLT-PLOW (1-1/4-7X3.74-IN)  
  8J-2928 [12] BOLT-PLOW (1-8X3.75-IN)(1-8 X 3.75IN)  
  5P-8362 [2] NUT (1-1/4-7-THD)  
  8J-2933 [12] NUT (1-8-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940547
 

9J-1137: TOOTH GP-RIPPER

9J-1137 TOOTH GP-RIPPER
S/N 7LP1-UP
PART OF 9J-4329 RIPPER GP
AN ATTACHMENT
i00432579 SEBP2794
9J1137 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4630 [2] PIN-COTTER  
2. 3G-6049 [1] PIN  
3. 1U-1257 [1] SHANK-RIPPER  
4. 149-5733 [1] RETAINER AS (G.E.T.)  
5. 9J-4259 [1] TIP-PENETRATION  
6. 132-4763 [1] PIN (G.E.T.)  
 

#SEBP27940548
 

1U-0630: TOOTH GP-SHORT

1U-0630 TOOTH GP-SHORT
S/N 2ZN1750-UP
FOR USE WITH MACHINES EQUIPPED WITH MULTIPURPOSE BUCKET
CANNOT BE USED WITH FULL LENGTH CUTTING EDGE
AN ATTACHMENT
i00353671 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9J-3175 Y [8] TIP GP-SHORT  
   
  1U-0307 [6] ADAPTER-STRAP  
  3G-4308 [1] ADAPTER-STRAP (LH)  
  3G-4309 [1] ADAPTER-STRAP (RH)  
  6V-6535 [2] BOLT-PLOW (1-1/4-7X3.74-IN)  
  8J-2928 [12] BOLT-PLOW (1-8X3.75-IN)(1-8 X 3.75IN)  
  5P-8362 [2] NUT (1-1/4-7-THD)  
  8J-2933 [12] NUT (1-8-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940549
 

1U-2425: TOOTH GP-UNI

1U-2425 TOOTH GP-UNI
S/N 2ZN1750-UP
FOR USE WITH @@@@@ 8Y-9100@@@@@
AN ATTACHMENT
i00354061 SEBP2794
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-8823 [2] BOLT-PLOW (1-1/4-7X4.13-IN)  
  8J-2928 [12] BOLT-PLOW (1-8X3.75-IN)(1-8 X 3.75IN)  
  5P-8362 [2] NUT (1-1/4-7-THD)  
  8J-2933 [12] NUT (1-8-THD)  
  1U-1877 [6] TOOTH-UNI  
  1U-1878 [1] TOOTH-UNI (LH)  
  1U-1879 [1] TOOTH-UNI (RH)  
 

Information:

Operation and Maintenance Manual
Cutting Edges and Bucket Teeth
953C Track-Type Loader
Bucket Teeth and Cutting Edges - Inspect/Replace
953C Track-Type Loader
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Specifications
Cutting Edges, End Bits And Tooth Groups
953C TRACK-TYPE LOADER HYDRAULICS
Cutting Edges, End Bits and Teeth
953C Track-Type Loader Hydraulic System
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14

Caterpillar Parts SIS Catalog 953C :

TIP GP-LONG
8E-3751 TIP GP-LONG
RIPPER GP
9J-4329 RIPPER GP
156-5736 RIPPER AR
155-1518 RIPPER AR
MOUNTING GP-RIPPER
3G-1349 MOUNTING GP-RIPPER
KIT-BUCKET
186-2712 KIT-BUCKET
GUARD-BUCKET CORNER
519-8492 GUARD-BUCKET CORNER
GUARD-BUCKET CORNER
519-8491 GUARD-BUCKET CORNER
8Y-9567 TIP GP-LONG
TIP GP-LONG
9J-3167 TIP GP-LONG
8Y-9566 TIP GP-SHORT
TIP GP-SHORT
9J-3175 TIP GP-SHORT
133-0686 TOOTH GP-LONG
1U-0629 TOOTH GP-LONG
TOOTH GP-RIPPER
9J-1137 TOOTH GP-RIPPER
1U-0630 TOOTH GP-SHORT

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.