ELECTRICAL AND STARTING SYSTEM
SOLENOID GPWIRING GP
OPERATOR STATION
MONITOR GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSPM (PREVENTIVE MAINTENANCE) KITS
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
#SEBP27970180
122-5053: VALVE GP-SOLENOID
122-5053 VALVE GP-SOLENOID
PART OF 107-1228 PUMP GP-UNIT INJECTOR HYD
PART OF 107-1228 PUMP GP-UNIT INJECTOR HYD
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | JZ | [1] | SEAL-O-RING | |
| 2. | JZ | [1] | RING-BACKUP | |
| 3. | JZ | [1] | SPACER-SPECIAL | |
| 4. | JZ | [1] | NUT-RETAINER (1/2-20-THD) | |
| 5. | JZ | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-1484 J | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP27970181
122-8946: WIRING GP-ELECTRONIC CONTROL
122-8946 WIRING GP-ELECTRONIC CONTROL
S/N 7LZ1-987
FOR USE WITH POSITIVE BUILD ENGINE ONLY
ALSO AN ATTACHMENT
S/N 7LZ1-987
FOR USE WITH POSITIVE BUILD ENGINE ONLY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-5918 | [4] | CLIP | |
| 2. | 3S-2093 | [17] | STRAP-CABLE | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 110-8457 | [1] | BOOT | |
| 5. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 122-8835 | [1] | HARNESS AS-WIRING (ELECTRONIC CONTROL) | |
| 7. | 3E-7278 | [1] | SWITCH GP-MAGNETIC (AIR INLET HEATER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (2-CM) | |||
| 8. | 4P-1826 | [1] | WIRE AS | |
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(.1-M) | |||
| 5P-5675 D | WIRE (6-GA, BLACK)(.2-M) | |||
| 9X-9882 | [2] | TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW) | ||
| 9. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 10. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 7E-8828 | [1] | SHIELD-HEAT | |
| 12. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 13. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 14. | 7E-5714 | [1] | STRAP-GROUNDING | |
| 15. | 7X-2536 M | [2] | BOLT (M8X1.25X14-MM) | |
| 16. | 4P-8134 | [2] | CLIP (LADDER) | |
| 17. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 7K-1181 | [2] | STRAP-CABLE | |
| 19. | 003-9835 | [2] | PROTECTOR | |
| 20. | 112-6646 M | [1] | LOCKNUT (M6X1-THD) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP27970182
122-8946: WIRING GP-ELECTRONIC CONTROL
122-8946 WIRING GP-ELECTRONIC CONTROL
S/N 7LZ988-UP
FOR USE WITH POSITIVE BUILD ENGINE ONLY
ALSO AN ATTACHMENT
S/N 7LZ988-UP
FOR USE WITH POSITIVE BUILD ENGINE ONLY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-5918 | [4] | CLIP | |
| 2. | 3S-2093 | [17] | STRAP-CABLE | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 156-7105 Y | [1] | HARNESS AS-WIRING (ELECTRONIC CONTROL) | |
| 6. | 175-2303 Y | [1] | SWITCH GP-MAGNETIC (AIR INLET HEATER) | |
| 7. | 4P-1826 | [1] | WIRE AS | |
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(.1-M) | |||
| 5P-5675 D | WIRE (6-GA, BLACK)(.2-M) | |||
| 9X-9882 | [2] | TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW) | ||
| 8. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 7E-8828 | [1] | SHIELD-HEAT | |
| 11. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 12. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 13. | 7E-5714 | [1] | STRAP-GROUNDING | |
| 14. | 7X-2536 M | [2] | BOLT (M8X1.25X14-MM) | |
| 15. | 4P-8134 | [2] | CLIP (LADDER) | |
| 16. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 17. | 7K-1181 | [2] | STRAP-CABLE | |
| 18. | 003-9835 | [1] | PROTECTOR | |
| 19. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 21. | 1H-3338 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 22. | 012-0380 | [2] | LOCKWASHER (6.5X12.5X1.6-MM THK) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27970183
245-4846: MODULE GP-DISPLAY
245-4846 MODULE GP-DISPLAY -MESSENGER
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP27970184
247-4829: MODULE GP-DISPLAY
247-4829 MODULE GP-DISPLAY -MESSENGER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 278-0086 | [1] | HARNESS AS-MONITOR (MESSENGER DISPLAY) | |
| 092-8226 | [1] | SPLICE | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(2-CM) | |||
| 153-2707 E | CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(62-CM) | |||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 2. | 245-2943 | [1] | CONTROL GP-UNPRGMED MONITOR (MESSENGER) | |
| 267-1371 F | [1] | SOFTWARE GP-MONITOR | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP27970185
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| [1] | FILM (INFORMATION)(SERIAL NUMBER) | |||
| (INSTALL ON LH SIDE TOWARDS REAR OF ENGINE BELOW VALVE COVER ON TOP PORTION OF ROUNDED SURFACE) | ||||
| 118-6305 | [1] | FILM-WARNING (HIGH VOLTAGE, HIGH PRESSURE)(WARNING) (UNIT INJECTOR) | ||
| (INSTALL ON TOP FLAT SURFACE OF VALVE COVER ADJACTENT TO THE RIGHT SIDE OF WARRANTY FILM) | ||||
| (READABLE FROM LEFT HAND SIDE OF ENGINE) | ||||
| 124-5354 | [1] | FILM-INFORMATION (TRADEMARK)(CATERPILLAR 44 X 228) | ||
| (INSTALL ON TOP FLAT SURFACE OF VALVE COVER TOWARD REAR OF ENGINE READABLE FROM LH SIDE OF ENGINE) | ||||
| 136-9066 | [1] | FILM-INFORMATION (ENGINE OIL)(API CF-4 OR CG-4) | ||
| (INSTALL ON LH SIDE OF ENGINE ON OIL FILL TUBE BENEATH FILLER CAP) | ||||
| 4P-6379 | [1] | FILM-IDENTIFICATION (FUEL FILTER) | ||
| (INSTALL ON SPIN-ON FUEL FILTER) | ||||
| 4P-8681 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILTER) | ||
| (INSTALL ON SPIN-ON OIL FILTER) | ||||
| 156-8041 | [1] | FILM-INFORMATION (DO NOT REMOVE)(DO NOT REMOVE) | ||
| (INSTALL ON OIL PUMP RESERVOIR READABLE FROM LEFT SIDE OF ENGINE) | ||||
| 9M-0016 | [1] | FILM-PATENT (ENGINE) | ||
| (INSTALL ON FRONT TIMING COVER TOWARDS LEFT HAND SIDE OF ENGINE) | ||||
| 7W-9808 | [1] | FILM-INFORMATION (EPA)(ENGLISH AND FRENCH) | ||
| (INSTALL ADJACENT TO RIGHT SIDE OF EPA EMISSION FILM READABLE FROM LH SIDE OF ENGINE) | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| (INSTALL ON TOP OF VALVE COVER TOWARDS RH FRONT OF ENGINE READABLE FROM LH SIDE OF ENGINE) | ||||
| (INSTALL LAMINANT OVER SILVER FILM) | ||||
| [1] | PLATE-SERIAL NUMBER (ENGINE)(ENGINE) | |||
| (REFLATTEN AFTER STAMPING) | ||||
| (INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON LOWER RH SIDE OF CYLINDER BLOCK) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| (INSTALL PRESTART TAG) | ||||
| 3N-3469 | [1] | TAG-INSTRUCTION (ENGINE PRESTART)(ENGLISH AND SPANISH) | ||
| (INSTALL ON RH OR LH SIDE ENGINE IN A VISIBLE LOCATION) | ||||
| (DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT) | ||||
#SEBP27970186
173-5325: KIT-PREVENTIVE MAINTENANCE
173-5325 KIT-PREVENTIVE MAINTENANCE
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP27970187
173-5326: KIT-PREVENTIVE MAINTENANCE
173-5326 KIT-PREVENTIVE MAINTENANCE
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Information:
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
Disassembly and Assembly
Caterpillar Parts SIS Catalog 3126 :
Truck sale:
On Request
