AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

148-2343 AXLE AR-OSCILLATING -REAR S/N 7MZ1-UP PART OF 139-5897 POWER TRAIN AR 836G LANDFILL COMPACTOR


POWER TRAIN
AXLE GP
TRANSMISSION GP
CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP

LANDFILL COMPACTOR 836G LANDFILL COMPACTOR 7MZ
 836G Landfill Compactor 7MZ00001-UP (MACHINE) POWERED BY 3456 Engine SEBP2802 836G 7MZ   (1998)

POWER TRAIN

AXLE GP
148-2345 AXLE AR-FIXED
148-2343 AXLE AR-OSCILLATING
AXLE GP-FIXED
148-2346 AXLE GP-FIXED
AXLE GP-OSCILLATING
148-2344 AXLE GP-OSCILLATING
FASTENER GP-AXLE MOUNTING
151-0412 FASTENER GP-AXLE MOUNTING
560-0101 KIT-AXLE GUARD
WHEEL & FINAL DRIVE GP
192-0822 WHEEL & FINAL DRIVE GP
 

#SEBP28020210
 

148-2343: AXLE AR-OSCILLATING

148-2343 AXLE AR-OSCILLATING -REAR
S/N 7MZ1-UP
PART OF 139-5897 POWER TRAIN AR
i01423470 SEBP2802
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  148-2344 Y [1] AXLE GP-OSCILLATING (REAR)  
  164-4648 Y [1] DIFFERENTIAL & BEVEL GEAR GP  
  192-0822 Y [2] WHEEL & FINAL DRIVE GP  
  220-7925 [1] PLATE GP-AXLE IDENTIFICATION  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28020211
 

148-2346: AXLE GP-FIXED

148-2346 AXLE GP-FIXED -FRONT
S/N 7MZ1-UP
PART OF 148-2345 AXLE AR-FIXED
i00957140 SEBP2802
1482346 AXLE GP-FIXED Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 510-1716 [2] PLATE AS  
2. 8T-4183 M [16] BOLT (M12X1.75X40-MM)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 510-1717 [2] PLATE AS  
5. 148-5379 [32] SPACER (25.5X40X10-MM THK)  
6. 142-4458 [2] BAR  
7. 7X-2552 M [4] BOLT (M16X2X30-MM)  
8. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
9. 565-4469 [2] SHAFT-AXLE  
10. 200-0820 [1] HOUSING AS  
  6M-1622 [2] DOWEL  
11. 165-4929 [1] PLUG AS-MAGNETIC (AXLE OIL DRAIN)  
  5P-4484 [1] PLUG-MAGNETIC (AXLE OIL DRAIN)  
  7M-8485 [1] SEAL-O-RING  
12. 8T-0336 [1] FITTING-PRESSURE RELIEF  
13. 316-5470 [2] COVER AS  
14. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
15. 8T-4244 M [4] NUT (M12X1.75-THD)  
16. 244-6356 M [50] BOLT (M24X3X110-MM)  
17. 5P-6604 [50] WASHER-HARD (25.4X40X5-MM THK)  
18. 4S-5858 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4205 [1] PLUG  
19. 1T-0479 [2] RING-RETAINING  
  M   METRIC PART
 

#SEBP28020212
 

148-2344: AXLE GP-OSCILLATING

148-2344 AXLE GP-OSCILLATING -REAR
S/N 7MZ1-UP
PART OF 148-2343 AXLE AR-OSCILLATING
i00952920 SEBP2802
1482344 AXLE GP-OSCILLATING Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-0817 [1] HOUSING-AXLE  
2. 9M-6097 [3] SEAL-O-RING  
3. 220-6043 [2] BUSHING  
4. 4S-5858 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4205 [1] PLUG  
5. 2D-6533 [1] SEAL-O-RING  
6. 5S-0085 [2] BEARING-THRUST  
7. 164-4175 [1] PLATE-THRUST  
8. 164-4156 [1] COVER  
9. 565-4469 [2] SHAFT-AXLE  
10. 1K-6853 [2] FITTING-PRESSURE RELIEF  
11. 8T-0336 [1] FITTING-PRESSURE RELIEF  
12. 9S-4181 [3] PLUG (1-5/16-12-THD)  
13. 7M-8485 [3] SEAL-O-RING  
14. 165-4929 [1] PLUG AS-MAGNETIC (AXLE OIL DRAIN)  
  5P-4484 [1] PLUG-MAGNETIC (AXLE OIL DRAIN)  
  7M-8485 [1] SEAL-O-RING  
15. 6M-1622 [4] DOWEL  
16. 1T-0479 [2] RING-RETAINING  
17. 119-4258 [1] RETAINER-BEARING  
18. 209-6694 [1] TRUNNION  
19. 160-8510 M [54] BOLT-SELF-LOCKING (M20X2.5X60-MM)  
20. 8T-3282 [54] WASHER-HARD (22X35X3.5-MM THK)  
21. 331-6206 [1] SUPPORT-TRUNNION (FRONT)  
22. 8T-0441 M [12] BOLT (M10X1.5X45-MM)  
23. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
24. 331-6210 [1] SUPPORT-TRUNNION (REAR)  
25. 9S-8005 [2] PLUG (3/4-16-THD)  
26. 3K-0360 [2] SEAL-O-RING  
27. 244-6356 M [50] BOLT (M24X3X110-MM)  
28. 5P-6604 [50] WASHER-HARD (25.4X40X5-MM THK)  
29. 8T-4183 M [16] BOLT (M12X1.75X40-MM)  
30. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 148-5379 [32] SPACER (25.5X40X10-MM THK)  
32. 510-1717 [2] PLATE AS  
33. 510-1716 [2] PLATE AS  
  M   METRIC PART
 

#SEBP28020213
 

133-8114: CASE & PARTS GP-PLANETARY

133-8114 CASE & PARTS GP-PLANETARY
S/N 3NY1-1066
PART OF 137-6229 TRANSMISSION AR
i01320493 SEBP2802
1338114 CASE & PARTS GP-PLANETARY Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9086 [1] GASKET  
2. 7B-1597 [1] CLIP  
3. 6T-6791 [1] TUBE AS  
4. 8E-9080 [1] CASE AS-TRANSMISSION  
  1A-2223 [2] DOWEL  
6. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
7. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 193-0635 [1] COVER AS  
9. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 0L-1351 [20] BOLT (3/8-16X0.875-IN)  
11. 135-6792 [1] MANIFOLD  
12. 8M-4992 [2] SEAL-O-RING  
13. 5P-2587 [1] SEAL-O-RING  
14. 164-6877 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  030-7947 [1] ADAPTER-ELBOW  
15. 9S-4183 [2] PLUG (1-1/16-12-THD)  
16. 3D-2824 [2] SEAL-O-RING  
17. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
18. 0T-0102 [1] BOLT (3/8-16X0.625-IN)  
19. 165-4930 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6M-6853 [1] TEE-O-RING  
20. 6K-9194 [1] ELBOW  
 

#SEBP28020214
 

356-6202: CASE & PARTS GP-PLANETARY

356-6202 CASE & PARTS GP-PLANETARY
S/N 3NY1067-UP
PART OF 137-6229 TRANSMISSION AR
i04124749 SEBP2802
3566202 CASE & PARTS GP-PLANETARY Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9086 [1] GASKET  
2. 7B-1597 [1] CLIP  
3. 6T-6791 [1] TUBE AS  
4. 8E-9080 [1] CASE AS-TRANSMISSION  
  1A-2223 [2] DOWEL  
5. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 193-0635 [1] COVER AS  
  7J-5225 [1] FITTING (1-1/16-12-THD)  
  133-8120 [1] COVER  
8. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 0L-1351 [20] BOLT (3/8-16X0.875-IN)  
10. 135-6792 [1] MANIFOLD  
11. 8M-4992 [2] SEAL-O-RING  
12. 5P-2587 [1] SEAL-O-RING  
14. 9S-4183 [2] PLUG (1-1/16-12-THD)  
15. 3D-2824 [2] SEAL-O-RING  
16. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
17. 0T-0102 [1] BOLT (3/8-16X0.625-IN)  
18. 165-4930 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6M-6853 [1] TEE-O-RING  
19. 6K-9194 [1] ELBOW  
 

#SEBP28020215
 

165-3621: CONTROL GP-TRANSMISSION HYD

165-3621 CONTROL GP-TRANSMISSION HYD
S/N 3NY572-819
PART OF 137-6229 TRANSMISSION AR
i01225361 SEBP2802
1653621 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-5053 Y [1] VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)  
2. 179-9445 [1] HARNESS AS-TRANSMISSION (CONTROL)  
  6J-2419 [1] SEAL-O-RING  
  8T-6342 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
3. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
4. 132-5789 [4] CLIP (LADDER)  
5. 6Y-7125 [2] SLEEVE  
6. 8M-4432 [4] SEAL-O-RING  
7. 3S-2093 [4] STRAP-CABLE  
8. 160-8408 Y [6] VALVE GP-MODULATING (TRANSMISSION CLUTCH)  
9. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 0S-1619 [4] BOLT (3/8-16X3-IN)  
11. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 1D-4540 [12] BOLT (5/16-18X2.75-IN)  
13. 104-6729 [1] RETAINER  
14. 104-6730 [1] GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP28020216
 

165-3621: CONTROL GP-TRANSMISSION HYD

165-3621 CONTROL GP-TRANSMISSION HYD
S/N 3NY820-1062
PART OF 137-6229 TRANSMISSION AR
i01795241 SEBP2802
1653621 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-5053 Y [1] VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)  
2. 179-9445 [1] HARNESS AS-TRANSMISSION (CONTROL)  
  6J-2419 [1] SEAL-O-RING  
  8T-6342 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
3. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
4. 132-5789 [4] CLIP (LADDER)  
5. 6Y-7125 [2] SLEEVE  
6. 8M-4432 [4] SEAL-O-RING  
7. 3S-2093 [4] STRAP-CABLE  
8. 216-5338 CY [6] VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)  
9. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 0S-1619 [4] BOLT (3/8-16X3-IN)  
11. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 1D-4540 [12] BOLT (5/16-18X2.75-IN)  
13. 104-6729 [1] RETAINER  
14. 104-6730 [1] GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP28020217
 

165-3621: CONTROL GP-TRANSMISSION HYD

165-3621 CONTROL GP-TRANSMISSION HYD
S/N 3NY1063-UP
PART OF 137-6229 TRANSMISSION AR
i02303952 SEBP2802
1653621 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-5053 Y [1] VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)  
2. 179-9445 [1] HARNESS AS-TRANSMISSION (CONTROL)  
  6J-2419 [1] SEAL-O-RING  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
3. 132-5789 [4] CLIP (LADDER)  
4. 6Y-7125 [2] SLEEVE  
5. 8M-4432 [4] SEAL-O-RING  
6. 3S-2093 [4] STRAP-CABLE  
7. 244-3114 CY [6] VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)  
8. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 0S-1619 [4] BOLT (3/8-16X3-IN)  
10. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
11. 1D-4540 [12] BOLT (5/16-18X2.75-IN)  
12. 104-6729 [1] RETAINER  
13. 104-6730 [1] GASKET  
14. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28020218
 

148-2347: DIFFERENTIAL & BEVEL GEAR GP

148-2347 DIFFERENTIAL & BEVEL GEAR GP
S/N 7MZ1-UP
PART OF 148-2345 AXLE AR-FIXED
i00955853 SEBP2802
1482347 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-9374 [1] CUP-BEARING (TAPERED ROLLER)  
2. 5M-6592 [1] CUP-BEARING (TAPERED ROLLER)  
3. 6M-1637 [1] CONE-BEARING (TAPERED ROLLER)  
4. 6M-1638 [1] CUP-BEARING (TAPERED ROLLER)  
5. 126-8182 [1] CUP-BEARING (TAPERED ROLLER)  
6. 165-2135 [1] CONE-SPECIAL TAPERED  
7. 4B-9373 [1] CONE-BEARING (TAPERED ROLLER)  
8. 6B-4852 [1] CONE-BEARING (TAPERED ROLLER)  
9. 4E-1966 [1] RETAINER  
10. 5J-1086 [1] SEAL-O-RING  
11. 5K-3661 [2] LOCK-BEARING  
12. 8R-0053 [1] WASHER (91.4X129.8X6.4-MM THK)  
13. 8R-2857 [1] RING-ADJUSTMENT  
14. 8T-3013 [1] SEAL-O-RING  
15. 9M-5024 [1] SEAL-O-RING  
16. 133-4292 [1] SEAL-LIP TYPE  
17. 356-4203 [1] GEAR SET-BEVEL (45-TEETH)  
  356-4202 [1] SHAFT-BEVEL PINION  
  362-4771 [1] GEAR-BEVEL  
18. 137-8856 [1] PIN  
19. 137-8857 [1] RING-ADJUSTMENT  
20. 146-7271 Y [1] DIFFERENTIAL GP-NOSPIN  
21. 154-7997 B [1] SHIM PACK (INCLUDES 16-SHIMS)  
22. 164-4649 [16] SPACER (26-MM THK)  
23. 164-9326 B [1] SHIM PACK (INCLUDES 14-SHIMS)  
24. 173-5850 [1] YOKE AS  
24A. 4E-3601 [1] GUARD  
24B. 121-1257 [1] RING-RETAINING  
24C. 144-4524 [1] CUP-DUST  
24D. 1H-6227 [1] SEAL-O-RING  
25. 209-6696 [1] HOUSING-PINION  
26. 397-9376 M [16] BOLT (M20X2.5X90-MM)  
27. 154-7998 [1] COVER  
28. 164-9324 [1] CARRIER AS  
28A. 177-9755 M [4] BOLT (M30X3.5X160-MM)  
28B. 9X-8399 [4] WASHER (33X56X6-MM THK)  
28C. 9S-8004 [1] PLUG (9/16-18-THD)  
28D. 3J-1907 [1] SEAL-O-RING  
29. 178-2991 M [29] BOLT-SELF-LOCKING (M20X2.5X70-MM)  
30. 160-8510 M [24] BOLT-SELF-LOCKING (M20X2.5X60-MM)  
31. 2H-3932 [1] SEAL-O-RING  
32. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 5P-8248 [77] WASHER-HARD (20X36.5X3.5-MM THK)  
34. 6V-3532 M [24] BOLT (M20X2.5X60-MM)  
35. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
36. 192-4744 M [2] BOLT (M10X1.5X20-MM)  
37. 8R-0052 M [1] NUT-STAKE (M90X2-THD)  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28020219
 

164-4648: DIFFERENTIAL & BEVEL GEAR GP

164-4648 DIFFERENTIAL & BEVEL GEAR GP
S/N 7MZ1-UP
PART OF 148-2343 AXLE AR-OSCILLATING
i00985003 SEBP2802
1644648 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 836G LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-9374 [1] CUP-BEARING (TAPERED ROLLER)  
2. 5M-6592 [1] CUP-BEARING (TAPERED ROLLER)  
3. 6M-1637 [1] CONE-BEARING (TAPERED ROLLER)  
4. 6M-1638 [1] CUP-BEARING (TAPERED ROLLER)  
5. 126-8182 [1] CUP-BEARING (TAPERED ROLLER)  
6. 165-2135 [1] CONE-SPECIAL TAPERED (ROLLER)  
7. 4B-9373 [1] CONE-BEARING (TAPERED ROLLER)  
8. 6B-4852 [1] CONE-BEARING (TAPERED ROLLER)  
9. 4E-1966 [1] RETAINER  
10. 5J-1086 [1] SEAL-O-RING  
11. 5K-3661 [2] LOCK-BEARING  
12. 8R-0053 [1] WASHER (91.4X129.8X6.4-MM THK)  
13. 8R-2857 [1] RING-ADJUSTMENT  
14. 8T-3013 [1] SEAL-O-RING  
15. 9M-5024 [1] SEAL-O-RING  
16. 133-4292 [1] SEAL-LIP TYPE  
17. 356-4203 [1] GEAR SET-BEVEL (45-TEETH)  
  356-4202 [1] SHAFT-BEVEL PINION  
  362-4771 [1] GEAR-BEVEL  
18. 137-8856 [1] PIN  
19. 137-8857 [1] RING-ADJUSTMENT  
20. 137-8858 Y [1] DIFFERENTIAL GP  
21. 154-7997 B [1] SHIM PACK (INCLUDES 16-SHIMS)  
22. 164-4649 [16] SPACER (26-MM THK)(MARKED X)  
23. 164-9326 B [1] SHIM PACK (INCLUDES 14-SHIMS)  
24. 173-5850 [1] YOKE AS  
24A. 4E-3601 [1] GUARD  
24B. 121-1257 [1] RING-RETAINING  
24C. 144-4524 [1] CUP-DUST  
24D. 1H-6227 [1] SEAL-O-RING  
25. 209-6696 [1] HOUSING-PINION  
26. 397-9376 M [16] BOLT (M20X2.5X90-MM)  
27. 154-7998 [1] COVER  
28. 164-9324 [1] CARRIER AS  
28A. 177-9755 M [4] BOLT (M30X3.5X160-MM)  
28B. 9X-8399 [4] WASHER (33X56X6-MM THK)  
28C. 9S-8004 [1] PLUG (9/16-18-THD)  
28D. 3J-1907 [1] SEAL-O-RING  
29. 178-2991 M [29] BOLT-SELF-LOCKING (M20X2.5X70-MM)  
30. 160-8510 M [24] BOLT-SELF-LOCKING (M20X2.5X60-MM)  
31. 2H-3932 [1] SEAL-O-RING  
32. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 5P-8248 [77] WASHER-HARD (20X36.5X3.5-MM THK)  
34. 6V-3532 M [24] BOLT (M20X2.5X60-MM)  
35. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
36. 192-4744 M [2] BOLT (M10X1.5X20-MM)  
37. 8R-0052 M [1] NUT-STAKE (M90X2-THD)  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 836G :

148-2345 AXLE AR-FIXED
WIRING GP-REAR
175-6712 WIRING GP-REAR
WIRING GP-POWER TRAIN
143-3767 WIRING GP-POWER TRAIN
WIRING GP-POWER TRAIN
143-3767 WIRING GP-POWER TRAIN
WIRING GP-MACHINE
143-3701 WIRING GP-MACHINE
WIRING GP-MACHINE
143-3701 WIRING GP-MACHINE
WIRING GP-FRONT
149-6176 WIRING GP-FRONT
WIRING GP-ENGINE
270-1695 WIRING GP-ENGINE
AXLE GP-FIXED
148-2346 AXLE GP-FIXED
AXLE GP-OSCILLATING
148-2344 AXLE GP-OSCILLATING
CASE & PARTS GP-PLANETARY
133-8114 CASE & PARTS GP-PLANETARY
CASE & PARTS GP-PLANETARY
356-6202 CASE & PARTS GP-PLANETARY
CONTROL GP-TRANSMISSION HYD
165-3621 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
165-3621 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
165-3621 CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
148-2347 DIFFERENTIAL & BEVEL GEAR GP

Truck sale:

Caterpillar 836G
 
Caterpillar 836G
- Compactors
BOYD CAT COMPANY
 
73,000 
Caterpillar 836G, Compactors, Construction


 
 
Caterpillar 836G, Construction
- Wheel dozers
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 836G, Construction
600,000 
Caterpillar 836G, Construction
- Compactors
RIGGS CAT
Caterpillar 836G, Construction
115,000 
Caterpillar 836G, Construction
- Compactors
CARTER MACHINERY NORTH
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.