AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

180-5872 CONSOLE GP-OPERATOR S/N 7ZN174-183 PART OF 173-2845 CONSOLE & MTG GP-OPERATOR 550 WHEEL HARVESTER


OPERATOR STATION
CONSOLE GP
AIR CONDITIONER GP
CAB GP
CONSOLE GP

WHEEL HARVESTER 550 WHEEL HARVESTER 7ZN
 550 Wheel Harvester 7ZN00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2803 550 7ZN   (1998)

OPERATOR STATION

CONSOLE GP
CONSOLE & MTG GP-OPERATOR
173-2845 CONSOLE & MTG GP-OPERATOR
CONSOLE GP-OPERATOR
164-7390 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
180-5872 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
198-2566 CONSOLE GP-OPERATOR
CONTROL GP-OPERATOR
159-3714 CONTROL GP-OPERATOR
CONTROL GP-OPERATOR
159-3714 CONTROL GP-OPERATOR
 

#SEBP28030360
 

180-5872: CONSOLE GP-OPERATOR

180-5872 CONSOLE GP-OPERATOR
S/N 7ZN174-183
PART OF 173-2845 CONSOLE & MTG GP-OPERATOR
i01321741 SEBP2803
1805872 CONSOLE GP-OPERATOR Parts scheme 1805872 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6477 [16] RELAY AS (24-VOLT)  
2. 6V-0292 [1] PLUG  
3. 7K-1181 [3] STRAP-CABLE  
4. 8U-6378 [21] FUSE (7.5-AMPERE)  
5. 8U-6379 [3] FUSE (15-AMPERE)  
6. 9W-1442 [10] FUSE (10-AMPERE)  
7. 9X-3387 [2] KIT-HARDWARE  
    (INCLUDES 2 OF EACH SCREWS, WASHERS, LOCKWASHERS & NUTS)
8. 107-5014 [4] KNOB  
9. 131-3987 M [2] SCREW (M4X0.7X12-MM)  
10. 133-8073 [1] HANDHOLD  
11. 140-4834 [2] FUSE (5-AMPERE)  
12. 159-1549 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
13. 161-5194 [1] CONTROL-MONITOR (IQAN-MG)  
14. 161-5196 [2] CONTROL (IQAN)  
15. 162-1800 [1] BRACKET AS  
16. 162-1872 [2] HINGE  
17. 164-0172 [1] COVER AS  
18. 164-7386 Y [1] PANEL & MONITOR GP-OPERATOR  
19. 171-8086 [1] SWITCH AS (DOOR)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 173-2802 [1] LAMP AS  
21. 173-2837 [1] BRACKET AS  
22. 173-2842 [1] PLATE AS  
23. 173-2846 [1] BRACKET  
24. 173-2849 Y [1] PANEL GP-INSTRUMENT  
25. 179-8634 [1] HARNESS AS-CONSOLE (IQAN, MAIN OPERATOR CONSOLE)(MAIN)  
26. 180-5887 [1] PLATE  
27. 183-5688 [3] BLOCK  
28. 183-5698 [3] FUSE (3-AMPERE)  
29. 183-5741 [1] RELAY AS  
30. 183-7699 [1] COVER  
31. 096-0192 [6] LOCKWASHER (EXTERNAL TOOTH)  
32. 096-2617 M [12] SCREW-MACHINE (M5X0.8X6-MM)  
33. 100-2881 M [14] SCREW-TRUSS HEAD (M5X0.8X10-MM)  
34. 3E-8048 M [10] SCREW-MACHINE (M3X0.5X6-MM)  
35. 5C-2874 M [8] NUT (M5X0.8-THD)  
36. 5C-8312 M [4] NUT (M4X0.7-THD)  
37. 6V-9672 M [1] SCREW-MACHINE (M4X0.7X16-MM)  
38. 6V-9673 M [6] SCREW-MACHINE (M5X0.8X12-MM)  
39. 8T-0337 M [28] SCREW-MACHINE (M4X0.7X12-MM)  
40. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28030361
 

198-2566: CONSOLE GP-OPERATOR

198-2566 CONSOLE GP-OPERATOR
S/N 7ZN184-UP
PART OF 173-2845 CONSOLE & MTG GP-OPERATOR
i01482551 SEBP2803
1982566 CONSOLE GP-OPERATOR Parts scheme 1982566 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6477 [16] RELAY AS (24-VOLT)  
2. 6V-0292 [1] PLUG  
3. 7K-1181 [3] STRAP-CABLE  
4. 8U-6378 [20] FUSE (7.5-AMPERE)  
5. 8U-6379 [4] FUSE (15-AMPERE)  
6. 9D-3768 [2] GROMMET  
7. 9W-1442 [12] FUSE (10-AMPERE)  
8. 9X-3387 [2] KIT-HARDWARE  
9. 107-5014 [4] KNOB  
10. 131-3987 M [2] SCREW (M4X0.7X12-MM)  
11. 133-8073 [1] HANDHOLD  
12. 140-4834 [1] FUSE (5-AMPERE)  
13. 159-1549 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
14. 161-5194 [1] CONTROL-MONITOR (IQAN-MG)  
15. 161-5196 [2] CONTROL (IQAN)  
16. 162-1800 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
17. 162-1872 [2] HINGE  
18. 164-0172 [1] COVER AS  
  172-4768 [1] FILM-IDENTIFICATION (FUSE)  
19. 164-7386 Y [1] PANEL & MONITOR GP-OPERATOR  
20. 171-8086 [1] SWITCH AS (DOOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
21. 173-2802 [1] LAMP AS  
22. 173-2837 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
23. 173-2842 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  8T-8874 M [14] NUT-WELD (M5X0.8-THD)  
  180-5897 [1] BRACKET  
24. 173-2846 [1] BRACKET  
25. 180-5887 [1] PLATE  
26. 183-5688 [3] BLOCK  
27. 183-5698 [2] FUSE (3-AMPERE)  
28. 183-5741 [1] RELAY AS  
29. 183-7699 [1] COVER  
30. 196-5168 Y [1] PANEL GP-INSTRUMENT  
31. 198-2564 [1] HARNESS AS-CONSOLE (IQAN, MAIN OPERATOR CONSOLE)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
  166-4449 [5] FUSEBOX  
  173-2801 [1] ALARM  
32. 096-0192 [6] LOCKWASHER (EXTERNAL TOOTH)  
33. 096-2617 M [12] SCREW-MACHINE (M5X0.8X6-MM)  
34. 100-2881 M [14] SCREW-TRUSS HEAD (M5X0.8X10-MM)  
35. 3E-8048 M [10] SCREW-MACHINE (M3X0.5X6-MM)  
36. 5C-2874 M [7] NUT (M5X0.8-THD)  
37. 5C-8312 M [2] NUT (M4X0.7-THD)  
38. 6V-9672 M [1] SCREW-MACHINE (M4X0.7X16-MM)  
39. 6V-9673 M [6] SCREW-MACHINE (M5X0.8X12-MM)  
40. 8T-0337 M [28] SCREW-MACHINE (M4X0.7X12-MM)  
41. 9X-2042 M [8] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 188-8807 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28030362
 

186-5078: CONTROL GP-AIR CONDITIONER

186-5078 CONTROL GP-AIR CONDITIONER
S/N 7ZN174-UP
PART OF 179-3124 AIR CONDITIONER GP
i01296295 SEBP2803
1865078 CONTROL GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-1500 [1] PLATE  
2. 169-1501 [1] FILM  
3. 169-1502 [1] KNOB-CONTROL (FAN SPEED)  
3A. 169-1502 [1] KNOB-CONTROL (AIR VENT)  
3B. 169-1502 [1] KNOB-CONTROL (TEMPERATURE)  
3C. 169-1502 [1] KNOB-CONTROL (DEFROSTER)  
4. 169-1503 [1] SWITCH (AIR DRYING)  
5. 169-1504 [2] CONTROL  
6. 169-1505 [1] HARNESS AS-HEATER & AIR COND (CONTROL)  
7. 169-1508 [1] CABLE  
8. 169-1510 [1] CABLE  
 

#SEBP28030363
 

159-3709: CONTROL GP-CAB TILT

159-3709 CONTROL GP-CAB TILT
S/N 7ZN1-UP
PART OF 163-2990, 179-3114 CAB AR
i01011260 SEBP2803
1593709 CONTROL GP-CAB TILT Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-5061 [1] CYLINDER-CAB TILT  
2. 158-7189 [1] EYE-ROD  
3. 164-0185 [1] TUBE AS  
4. 161-4994 [1] PUMP-HAND  
5. 166-3931 [2] MOUNT  
6. 164-0186 [1] LEVER AS  
7. 162-1887 [1] SPRING  
8. 160-6053 [2] HOSE AS  
9. 164-0184 [1] BAR AS  
10. 8T-6385 M [1] BOLT (M16X2X180-MM)  
11. 7X-2554 M [1] BOLT (M16X2X70-MM)  
12. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
13. 8T-4174 M [1] BOLT (M16X2X120-MM)  
14. 172-0162 [1] BOLT  
15. 6V-8932 M [3] SETSCREW-SOCKET (M6X1X10-MM)  
16. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
17. 098-6004 M [1] LOCKNUT (M20X2.5-THD)  
18. 9X-8257 [5] WASHER (17.5X30X3.5-MM THK)  
19. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
20. 161-4987 [1] LEVER  
21. 162-5781 D CABLE (1.0M)  
22. 162-5874 [1] RING  
23. 162-1884 [1] CONNECTOR  
24. 162-6094 [1] CLAMP  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP28030364
 

159-3714: CONTROL GP-OPERATOR

159-3714 CONTROL GP-OPERATOR
S/N 7ZN1-183
SEAT CONTROLS, STANDARD JOYSTICK
AN ATTACHMENT
i01021470 SEBP2803
1593714 CONTROL GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7368 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, RH, SEAT, SWITCHES)  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  8T-8737 [16] PLUG-SEAL  
2. 162-9521 [1] ROD AS  
3. 9T-4588 M [2] BOLT-SOCKET HEAD  
4. 158-7146 [2] SUPPORT  
5. 164-7369 [1] HARNESS AS-OPERATOR CONTROLS (IQAN)  
6. 161-5147 [2] CONTROL GP-JOYSTICK (STANDARD)  
7. 166-3332 [1] CONTROLLER (MACHINE LEVELLING)  
8. 161-5145 [1] LEVER (PROPORTIONAL STEERING)  
9. 171-8628 [1] SWITCH AS (MACHINE SPEED SELECTOR)  
10. 9M-8406 [4] CLIP (LOOP)  
11. 158-7144 [1] SUPPORT  
12. 161-5197 [1] CONTROL (IQAN)(IQAN-XS)  
13. 169-5809 [2] WASHER  
14. 169-4985 [2] CUP-SPRING  
15. 169-4987 [2] BOLT  
16. 169-4995 [2] NUT  
17. 169-5000 [2] LOCKNUT  
18. 161-5133 [1] SWITCH AS-FOOT PEDAL (REVERSE CONTROL)  
19. 158-7139 [1] PLATE AS  
20. 166-3450 [1] SUPPORT  
21. 166-3452 [1] PLATE  
22. 158-7148 [2] PLATE AS  
23. 161-5169 [1] SWITCH (DIFFERENTIAL LOCK-SINGLE CYCLE)  
24. 161-5168 [2] LENS  
25. 161-5162 [2] BRACKET  
26. 161-5148 [2] BRACKET  
27. 169-5001 [9] SCREW  
28. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
29. 8M-2771 [1] CLIP  
30. 8T-4753 M [8] SCREW (M5X0.8X20-MM)  
31. 169-5002 [4] SCREW  
32. 3C-6969 M [4] NUT (M3X0.5-THD)  
33. 169-5005 [4] RING-RETAINING  
34. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
35. 8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
36. 161-5171 [1] SWITCH (MACHINE TILT FRONT/BACK)  
37. 158-4781 M [2] SCREW (M6X1X16-MM)  
38. 129-3178 M [2] LOCKNUT (M6X1-THD)  
39. 171-6709 [1] HARNESS AS-SWITCH (SPEED SELECT)  
40. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
41. 171-6708 [2] HARNESS AS-SWITCH (LEVEL)  
42. 171-6707 [2] HARNESS AS-SWITCH (WIPER, DIFFERENTIAL LOCK)  
43. 5C-2890 M [1] NUT (M6X1-THD)  
44. 8T-4138 M [1] BOLT (M6X1X20-MM)  
45. 161-5171 [1] SWITCH (MACHINE TILT LEFT/RIGHT)  
46. 161-5169 [1] SWITCH (WINDOW WIPER-SINGLE CYCLE)  
47. 172-4781 [1] FILM-INSTRUCTION (BOOM CONTROL)  
  M   METRIC PART
 

#SEBP28030365
 

159-3714: CONTROL GP-OPERATOR

159-3714 CONTROL GP-OPERATOR
S/N 7ZN184-UP
SEAT CONTROLS, STANDARD JOYSTICK
Type 1
AN ATTACHMENT
i01458294 SEBP2803
1593714 CONTROL GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-8425 C [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, RH, SEAT, SWITCHES)  
  3E-3360 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  102-8812 [1] SEAL  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 162-9521 [1] ROD AS  
3. 9T-4588 M [2] BOLT-SOCKET HEAD  
4. 158-7146 [2] SUPPORT  
5. 164-7369 [1] HARNESS AS-OPERATOR CONTROLS (IQAN)  
6. 161-5147 [2] CONTROL GP-JOYSTICK (STANDARD)  
7. 166-3332 [1] CONTROLLER (MACHINE LEVELLING)  
8. 161-5145 [1] LEVER (PROPORTIONAL STEERING)  
9. 171-8628 [1] SWITCH AS (MACHINE SPEED SELECTOR)  
10. 9M-8406 [4] CLIP (LOOP)  
11. 158-7144 [1] SUPPORT  
12. 161-5197 [1] CONTROL (IQAN)(IQAN-XS)  
13. 169-5809 [2] WASHER  
14. 169-4985 [2] CUP-SPRING  
15. 169-4987 [2] BOLT  
16. 169-4995 [2] NUT  
17. 169-5000 [2] LOCKNUT  
18. 161-5133 [1] SWITCH AS-FOOT PEDAL (REVERSE CONTROL)  
19. 158-7139 [1] PLATE AS  
20. 166-3450 [1] SUPPORT  
21. 166-3452 [1] PLATE  
22. 158-7148 [2] PLATE AS  
23. 161-5169 [1] SWITCH (DIFFERENTIAL LOCK-SINGLE CYCLE)  
24. 161-5168 [2] LENS  
25. 161-5162 [2] BRACKET  
26. 161-5148 [2] BRACKET  
27. 169-5001 [9] SCREW  
28. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
29. 8M-2771 [1] CLIP  
30. 8T-4753 M [8] SCREW (M5X0.8X20-MM)  
31. 169-5002 [4] SCREW  
32. 3C-6969 M [4] NUT (M3X0.5-THD)  
33. 169-5005 [4] RING-RETAINING  
34. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
35. 8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
36. 161-5171 [1] SWITCH (MACHINE TILT FRONT/BACK)  
37. 158-4781 M [2] SCREW (M6X1X16-MM)  
38. 129-3178 M [2] LOCKNUT (M6X1-THD)  
39. 171-6709 [1] HARNESS AS-SWITCH (SPEED SELECT)  
40. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
41. 171-6708 [2] HARNESS AS-SWITCH (LEVEL)  
42. 171-6707 [2] HARNESS AS-SWITCH (WIPER, DIFFERENTIAL LOCK)  
43. 5C-2890 M [1] NUT (M6X1-THD)  
44. 8T-4138 M [1] BOLT (M6X1X20-MM)  
45. 161-5171 [1] SWITCH (MACHINE TILT LEFT/RIGHT)  
46. 161-5169 [1] SWITCH (WINDOW WIPER-SINGLE CYCLE)  
47. 172-4781 [1] FILM-INSTRUCTION (BOOM CONTROL)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28030366
 

159-3714: CONTROL GP-OPERATOR

159-3714 CONTROL GP-OPERATOR
S/N 7ZN184-UP
SEAT CONTROLS, STANDARD JOYSTICK
Type 2
AN ATTACHMENT
i01548378 SEBP2803
1593714 CONTROL GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-8425 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, RH, SEAT, SWITCHES)  
  3E-3360 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  102-8812 [1] SEAL  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 162-9521 [1] ROD AS  
3. 9T-4588 M [2] BOLT-SOCKET HEAD  
4. 158-7146 [2] SUPPORT  
5. 208-3618 C [1] HARNESS AS-CONTROL (IQAN)  
  8T-8737 [8] PLUG-SEAL  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
6. 197-3677 C [2] CONTROL GP-JOYSTICK (PALM TYPE)  
7. 197-3674 C [1] CONTROL GP-JOYSTICK (PENDULUM ARM CONTROL)(MACHINE LEVELLING)  
8. 197-3678 C [1] CONTROL GP-HANDLE (PROPORTIONAL STEERING)  
9. 171-8628 [1] SWITCH AS (MACHINE SPEED SELECTOR)  
10. 9M-8406 [4] CLIP (LOOP)  
11. 158-7144 [1] SUPPORT  
12. 161-5197 [1] CONTROL (IQAN)(IQAN-XS)  
13. 169-5809 [2] WASHER  
14. 169-4985 [2] CUP-SPRING  
15. 169-4987 [2] BOLT  
16. 169-4995 [2] NUT  
17. 169-5000 [2] LOCKNUT  
18. 197-3676 C [1] SWITCH AS-FOOT PEDAL (REVERSE CONTROL)  
19. 158-7139 [1] PLATE AS  
20. 166-3450 [1] SUPPORT  
21. 166-3452 [1] PLATE  
22. 158-7148 [2] PLATE AS  
23. 161-5171 [1] SWITCH (MACHINE TILT LEFT/RIGHT)  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 172-4781 [1] FILM-INSTRUCTION (BOOM CONTROL)  
26. 8T-4138 M [1] BOLT (M6X1X20-MM)  
27. 169-5001 [9] SCREW  
28. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
29. 8M-2771 [1] CLIP  
30. 8T-4753 M [8] SCREW (M5X0.8X20-MM)  
31. 169-5002 [4] SCREW  
32. 3C-6969 M [4] NUT (M3X0.5-THD)  
33. 169-5005 [4] RING-RETAINING  
34. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
35. 8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
36. 161-5171 [1] SWITCH (MACHINE TILT FRONT/BACK)  
37. 158-4781 M [2] SCREW (M6X1X16-MM)  
38. 129-3178 M [2] LOCKNUT (M6X1-THD)  
39. 171-6709 [1] HARNESS AS-SWITCH (SPEED SELECT)  
40. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
41. 171-6708 [2] HARNESS AS-SWITCH (LEVEL)  
42. 171-6707 [2] HARNESS AS-SWITCH (WIPER, DIFFERENTIAL LOCK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28030367
 

166-3996: CONTROL GP-OPERATOR

166-3996 CONTROL GP-OPERATOR
S/N 7ZN1-171
SEAT CONTROLS, MINIATURE JOYSTICK
AN ATTACHMENT
i01036817 SEBP2803
1663996 CONTROL GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7368 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, RH, SEAT, SWITCHES)  
  8T-8737 [16] PLUG-SEAL  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
2. 162-9521 [1] ROD AS  
3. 9T-4588 M [2] BOLT-SOCKET HEAD  
4. 162-6056 [1] SWITCH-OPERATOR CONTROL  
5. 164-7369 [1] HARNESS AS-OPERATOR CONTROLS (IQAN)  
6. 161-5180 [2] HANDLE GP-MODULAR (JOYSTICK)  
7. 166-3332 [1] CONTROLLER (MACHINE LEVELING)  
8. 161-5145 [1] LEVER (PROPORTIONAL STEERING)  
9. 171-8628 [1] SWITCH AS (MACHINE SPEED SELECTOR)  
10. 8T-4138 M [1] BOLT (M6X1X20-MM)  
11. 158-7144 [1] SUPPORT  
12. 161-5197 [1] CONTROL (IQAN)(IQAN-XS)  
13. 169-5809 [2] WASHER  
14. 169-4985 [2] CUP-SPRING  
15. 169-4987 [2] BOLT  
16. 169-4995 [2] NUT  
17. 169-5000 [2] LOCKNUT  
18. 161-5133 [1] SWITCH AS-FOOT PEDAL (REVERSE CONTROL)  
19. 158-7139 [1] PLATE AS  
20. 166-3450 [1] SUPPORT  
21. 166-3452 [1] PLATE  
22. 158-7152 [2] PLATE AS (LH)  
23. 161-5169 [1] SWITCH (DIFFERENTIAL LOCK-SINGLE CYCLE)  
24. 161-5168 [2] LENS  
25. 8M-2771 [1] CLIP  
26. 162-6055 [1] SWITCH-OPERATOR CONTROL  
27. 169-5001 [9] SCREW  
28. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
29. 5C-2890 M [1] NUT (M6X1-THD)  
30. 6V-9672 M [8] SCREW-MACHINE (M4X0.7X16-MM)  
31. 162-6061 [1] CABLE  
32. 162-6060 [1] CABLE  
33. 171-6709 [1] HARNESS AS-SWITCH (SPEED SELECT)  
34. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
35. 8C-7581 M [4] SCREW-MACHINE (M4X0.7X8-MM)  
36. 158-4781 M [2] SCREW (M6X1X16-MM)  
37. 129-3178 M [2] LOCKNUT (M6X1-THD)  
38. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
39. 9M-8406 [4] CLIP (LOOP)  
40. 171-6708 [2] HARNESS AS-SWITCH (LEVEL)  
41. 171-6707 [2] HARNESS AS-SWITCH (WIPER, DIFFERENTIAL LOCK)  
42. 161-5169 [1] SWITCH (WINDOW WIPER-SINGLE CYCLE)  
43. 173-0105 [1] FILM-IDENTIFICATION (BOOM CONTROL)  
  M   METRIC PART
 

#SEBP28030368
 

166-3996: CONTROL GP-OPERATOR

166-3996 CONTROL GP-OPERATOR
S/N 7ZN172-UP
SEAT CONTROLS, MINIATURE JOYSTICK
Type 1
AN ATTACHMENT
i01388077 SEBP2803
1663996 CONTROL GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7368 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, RH, SEAT, SWITCHES)  
  8T-8737 [16] PLUG-SEAL  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
2. 162-9521 [1] ROD AS  
3. 9T-4588 M [2] BOLT-SOCKET HEAD  
4. 191-3058 CY [1] SWITCH GP-OPERATOR CONTROL (RH)  
5. 164-7369 [1] HARNESS AS-OPERATOR CONTROLS (IQAN)  
6. 161-5180 [2] HANDLE GP-MODULAR (JOYSTICK)  
7. 166-3332 [1] CONTROLLER (MACHINE LEVELING)  
8. 161-5145 [1] LEVER (PROPORTIONAL STEERING)  
9. 171-8628 [1] SWITCH AS (MACHINE SPEED SELECTOR)  
10. 8T-4138 M [1] BOLT (M6X1X20-MM)  
11. 158-7144 [1] SUPPORT  
12. 161-5197 [1] CONTROL (IQAN)(IQAN-XS)  
13. 169-5809 [2] WASHER  
14. 169-4985 [2] CUP-SPRING  
15. 169-4987 [2] BOLT  
16. 169-4995 [2] NUT  
17. 169-5000 [2] LOCKNUT  
18. 161-5133 [1] SWITCH AS-FOOT PEDAL (REVERSE CONTROL)  
19. 158-7139 [1] PLATE AS  
20. 166-3450 [1] SUPPORT  
21. 166-3452 [1] PLATE  
22. 158-7152 [2] PLATE AS (LH)  
23. 191-3060 C [1] HARNESS AS-CONSOLE  
24. 173-0105 [1] FILM-IDENTIFICATION (BOOM CONTROL)  
25. 8M-2771 [1] CLIP  
26. 191-3059 CY [1] SWITCH GP-OPERATOR CONTROL (LH)  
27. 169-5001 [9] SCREW  
28. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
29. 5C-2890 M [1] NUT (M6X1-THD)  
30. 6V-9672 M [8] SCREW-MACHINE (M4X0.7X16-MM)  
31. 191-3061 C [1] HARNESS AS-CONSOLE  
32. 171-6708 [2] HARNESS AS-SWITCH (LEVEL)  
33. 171-6709 [1] HARNESS AS-SWITCH (SPEED SELECT)  
34. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
35. 8C-7581 M [4] SCREW-MACHINE (M4X0.7X8-MM)  
36. 158-4781 M [2] SCREW (M6X1X16-MM)  
37. 129-3178 M [2] LOCKNUT (M6X1-THD)  
38. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
39. 9M-8406 [4] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28030369
 

166-3996: CONTROL GP-OPERATOR

166-3996 CONTROL GP-OPERATOR
S/N 7ZN172-UP
SEAT CONTROLS, MINIATURE JOYSTICK
Type 2
AN ATTACHMENT
i01472665 SEBP2803
1663996 CONTROL GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-8425 C [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE, RH, SEAT, SWITCHES)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  8T-8737 [15] PLUG-SEAL  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
2. 162-9521 [1] ROD AS  
3. 9T-4588 M [2] BOLT-SOCKET HEAD  
4. 191-3058 Y [1] SWITCH GP-OPERATOR CONTROL (RH)  
5. 164-7369 [1] HARNESS AS-OPERATOR CONTROLS (IQAN)  
6. 161-5180 [2] HANDLE GP-MODULAR (JOYSTICK)  
7. 166-3332 [1] CONTROLLER (MACHINE LEVELING)  
8. 161-5145 [1] LEVER (PROPORTIONAL STEERING)  
9. 171-8628 [1] SWITCH AS (MACHINE SPEED SELECTOR)  
10. 8T-4138 M [1] BOLT (M6X1X20-MM)  
11. 158-7144 [1] SUPPORT  
12. 161-5197 [1] CONTROL (IQAN)(IQAN-XS)  
13. 169-5809 [2] WASHER  
14. 169-4985 [2] CUP-SPRING  
15. 169-4987 [2] BOLT  
16. 169-4995 [2] NUT  
17. 169-5000 [2] LOCKNUT  
18. 161-5133 [1] SWITCH AS-FOOT PEDAL (REVERSE CONTROL)  
19. 158-7139 [1] PLATE AS  
20. 166-3450 [1] SUPPORT  
21. 166-3452 [1] PLATE  
23. 191-3060 [1] HARNESS AS-CONSOLE  
24. 173-0105 [1] FILM-IDENTIFICATION (BOOM CONTROL)  
25. 8M-2771 [1] CLIP  
26. 191-3059 Y [1] SWITCH GP-OPERATOR CONTROL (LH)  
27. 169-5001 [9] SCREW  
28. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
29. 5C-2890 M [1] NUT (M6X1-THD)  
30. 6V-9672 M [8] SCREW-MACHINE (M4X0.7X16-MM)  
31. 191-3061 [1] HARNESS AS-CONSOLE  
32. 171-6708 [2] HARNESS AS-SWITCH (LEVEL)  
33. 171-6709 [1] HARNESS AS-SWITCH (SPEED SELECT)  
34. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
35. 8C-7581 M [4] SCREW-MACHINE (M4X0.7X8-MM)  
36. 158-4781 M [2] SCREW (M6X1X16-MM)  
37. 129-3178 M [2] LOCKNUT (M6X1-THD)  
38. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
39. 9M-8406 [4] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 550 :

CONSOLE GP-OPERATOR
164-7390 CONSOLE GP-OPERATOR
CONSOLE & MTG GP-OPERATOR
173-2845 CONSOLE & MTG GP-OPERATOR
CONSOLE & MTG GP-OPERATOR
173-2845 CONSOLE & MTG GP-OPERATOR
CONSOLE & MTG GP-OPERATOR
159-3713 CONSOLE & MTG GP-OPERATOR
CONDENSER GP-REFRIGERANT
186-5079 CONDENSER GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
180-5864 CONDENSER GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
188-0170 CAB GP
CONSOLE GP-OPERATOR
198-2566 CONSOLE GP-OPERATOR
CONTROL GP-AIR CONDITIONER
186-5078 CONTROL GP-AIR CONDITIONER
CONTROL GP-CAB TILT
159-3709 CONTROL GP-CAB TILT
CONTROL GP-OPERATOR
159-3714 CONTROL GP-OPERATOR
CONTROL GP-OPERATOR
159-3714 CONTROL GP-OPERATOR
CONTROL GP-OPERATOR
159-3714 CONTROL GP-OPERATOR
CONTROL GP-OPERATOR
166-3996 CONTROL GP-OPERATOR
CONTROL GP-OPERATOR
166-3996 CONTROL GP-OPERATOR

Truck sale:

Caterpillar APS550, Construction
154,000 
Caterpillar APS550, Construction
- mobile generator sets
MACALLISTER MACHINERY CO., INC
2011 CAT 550
USD $199,500 
2011 CAT 550

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
2011 CAT 550
USD $225,000 
2011 CAT 550

PONSSE USA INC
Rhinelander, Wisconsin
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.