AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-5355 PUMP GP-GOV & FUEL INJ PART OF 6N-6269 PUMP GP-GOV & FUEL INJ 3306 INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP
SEPARATOR GP-WATER
SHUTOFF GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 23C
 3306 Industrial Engine 23C02002-UP SEBP2809 3306 23C   (1968)

FUEL SYSTEM

GOVERNOR GP
6N-6901 CONVERSION GP-GOVERNOR
GOVERNOR AS-FUEL INJ PUMP
3L-4022 GOVERNOR AS-FUEL INJ PUMP
GOVERNOR GP-OUTPUT SHAFT
5N-4813 GOVERNOR GP-OUTPUT SHAFT
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-6213 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-6269 PUMP GP-GOV & FUEL INJ
6N-7606 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-7614 PUMP GP-GOV & FUEL INJ
 

#SEBP28090270
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N-5355 PUMP GP-GOV & FUEL INJ
PART OF 6N-6269 PUMP GP-GOV & FUEL INJ
i00145428 SEBP2809
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme 6N5355 PUMP GP-GOV & FUEL INJ Parts scheme 6N5355 PUMP GP-GOV & FUEL INJ Parts scheme 6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING AS-GOVERNOR  
2. 4N-2333 [1] PIN-SPRING  
3. 8S-6814 [2] PIN  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL-LIP TYPE  
6. 6N-2578 [1] BEARING  
7. 2W-4037 [1] SEAL-LIP TYPE  
8. 6N-5323 [1] GUIDE-SPRING SEAT  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
10. 4N-2927 [2] RACE-THRUST BEARING  
11. 4N-0511 [3] DOWEL  
12. 8N-2663 C [1] CARRIER-WEIGHT  
13. 4N-4313 [1] CAMSHAFT-FUEL PUMP  
14. 8N-2662 C [3] BOLT-SOCKET HEAD  
15. 4N-2953 [1] RING-LOCK  
16. 7M-7219 [1] BEARING-THRUST  
17. 4N-0434 [1] RISER-GOVERNOR  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0572 [1] SHAFT AS-CONTROL  
21. 5M-6509 [1] SEAL-O-RING  
22. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
23. 9L-6863 [1] BODY AS-TRANSFER PUMP  
24. 8H-9804 [1] SHAFT-PUMP IDLER  
25. 4N-0636 [1] SEAL-LIP TYPE  
26. 4N-1584 [1] SEAL-LIP TYPE  
27. 8S-6814 [1] PIN  
28. 4N-5050 [1] PLUG  
29. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
30. 4N-0527 [1] SPRING  
31. 6N-2957 [2] WASHER  
32. 6N-2956 [1] WASHER-SPRING  
33. 4N-0927 [1] SHAFT AS-SHUTOFF  
34. 4N-1723 [1] SHIELD-CARRIER  
35. 6N-4655 [1] DASHPOT AS  
36. 4N-6407 [1] SPOOL-DASHPOT  
37. 4N-6406 [1] RING-SPACER  
38. 4N-6404 [1] RING-RETAINING  
39. 4N-0425 [3] WEIGHT-GOVERNOR  
40. 4N-3779 [1] KEY-CAMSHAFT  
41. 6N-7451 [1] SEAT-SPRING  
42. 6N-7523 C [2] WASHER (6.48X11.9X1.57-MM THK)  
43. 8N-1570 [1] HOUSING AS-PUMP  
44. 4N-5481 [1] STUD  
45. 4N-2333 [1] PIN-SPRING  
46. 4N-1826 [1] DOWEL  
47. 2D-6392 [1] SEAL-O-RING  
48. 7E-5346 [1] VALVE AS (FUEL PRESSURE RELIEF)  
49. 8N-0984 [6] PIN-SPRING  
50. 9S-8632 [1] SPRING  
51. 4N-0116 [1] GUIDE-IDLE SCREW  
52. 5J-5314 [4] BOLT (5/16-18X1.5-IN)  
53. 4N-2954 [1] SLEEVE-CAMSHAFT  
54. 1P-4001 [1] FITTING  
55. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT (5/16-18-THD)  
56. 1P-2497 [2] BOLT-HEAD (10-24X1-IN)  
57. 4N-5578 [1] COVER-IDLE SCREW  
  4N-0049 [1] GASKET-COVER  
58. 1P-9925 [1] BOLT (1/4-20X2.5-IN)  
59. 4N-0594 [1] GASKET-GOVERNOR HOUSING  
60. 1P-9925 [1] BOLT (1/4-20X2.5-IN)  
  2A-4781 [1] BOLT (1/4-20X2.75-IN)  
  3B-8695 [1] BOLT (1/4-20X3.5-IN)  
  0S-1616 [2] BOLT (1/4-20X1-IN)  
61. 4N-0209 [6] BONNET-VALVE  
62. 7W-8120 [6] BUSHING-TERMINAL  
63. 9B-1320 [6] VALVE-CHECK (FUEL)  
  9L-9424 [6] SPRING-VALVE  
64. 4N-0224 [6] RING-RETAINING  
65. 6N-7527 [6] PUMP AS-FUEL INJECTION  
66. 9N-5862 [6] SPRING-LIFTER  
67. 4N-2728 [6] WASHER-RETAINING  
68. 8N-1317 [6] LIFTER-PLUNGER  
  4N-2685 [6] ROLLER-LIFTER  
69. 2N-2658 [6] BOLT-SOCKET HEAD (8-32X15.88-MM)  
70. 4N-1763 [6] LEVER-CONTROL  
71. 4N-0528 [1] SHAFT-LEVER  
72. 128-7347 [1] LEVER AS-RISER  
73. 2M-7819 [1] RING-RETAINING  
74. 3H-0442 [1] SEAL-O-RING  
75. 166-0368 [1] GASKET  
76. 4N-0445 [1] LEVER-LOAD STOP  
77. 165-6474 [1] COVER AS  
78. 6N-0412 C [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
79. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
80. 7L-8070 [2] BOLT  
81. 4N-0523 [1] DOWEL-STOP SUPPORT  
  2D-6392 [1] SEAL-O-RING  
82. 6F-6672 C [6] SEAL-O-RING  
83. 4N-1881 [1] LEVER-SEAT  
84. 4N-0448 [2] LEVER AS-SHUTOFF  
  9L-8571 [1] DOWEL  
85. 8F-5368 [1] WASHER  
86. 6N-5482 [2] PLATE-FRICTION  
87. 4N-0687 [1] COVER AS-CONTROL  
88. 4N-2786 [1] SEAL-LIP TYPE  
89. 0S-1616 [4] BOLT (1/4-20X1-IN)  
90. 4N-0402 [1] GASKET-COVER  
91. 9S-8601 [1] PIN-LOW IDLE  
92. 4N-1767 [1] VALVE-BYPASS (FUEL)  
93. 4N-0605 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28090271
 

6N-6213: PUMP GP-GOV & FUEL INJ

6N-6213 PUMP GP-GOV & FUEL INJ
FIELD REPLACEMENT ORDER @@@@@ 6N-7606@@@@@
i00388211 SEBP2809
6N6213 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GP  
2. 6N-6269 Y [1] PUMP GP-GOV & FUEL INJ  
3. 4N-0443 [1] PIN-LOAD STOP  
4. 4N-4227 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28090272
 

6N-6269: PUMP GP-GOV & FUEL INJ

6N-6269 PUMP GP-GOV & FUEL INJ
PART OF 6N-6213 PUMP GP-GOV & FUEL INJ
i00388248 SEBP2809
6N6269 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3094 [1] ADAPTER AS  
2. 3N-2813 [1] SEAL-LIP TYPE  
3. 4N-9467 [2] BEARING  
4. 3N-2820 [1] LEVER AS  
5. 4S-9487 [1] DOWEL  
6. 3N-9633 [1] LEVER AS  
  5H-8985 [1] PIN-SPRING  
7. 9F-1707 [1] BOLT (10-24-THD)  
8. 2W-1626 [1] GASKET  
9. 6N-0248 [1] SHAFT AS-CONTROL  
10. 6N-5355 Y [1] PUMP GP-GOV & FUEL INJ  
11. 4N-5490 [1] BASE AS-FUEL FILTER  
12. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
13. 9F-6580 [2] BOLT (1/4-20X1.125-IN)  
14. 0S-1615 [13] BOLT (1/4-20X0.75-IN)  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET-ELBOW  
17. 8S-4710 [1] BOLT (1/4-20X4-IN)  
18. 7N-0450 C [1] VALVE AS  
19. 9F-7022 [1] BOLT (1/4-20X1.5-IN)  
20. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
21. 4N-4431 [1] GASKET-CHANNEL  
  6N-2810 [1] CHANNEL  
22. 4N-4351 [1] COVER-SIDE  
  4N-9057 [1] GASKET-SIDE COVER  
23. 7N-3096 [1] BASE-ADAPTER  
24. 6N-2843 [1] GASKET  
25. 3N-2815 [1] SHAFT-SHUTOFF  
26. 4N-0159 [1] GASKET  
27. 3N-2824 [1] LEVER AS  
  6N-0265 [1] DOWEL  
28. 2N-2658 [1] BOLT-SOCKET HEAD (8-32X15.88-MM)  
29. 2A-0762 [6] BOLT (1/4-20X0.625-IN)  
30. 3L-5987 [1] COVER  
31. 6L-5773 [1] GASKET  
32. 4N-0444 [2] PLATE-SPACER  
33. 9S-8597 [1] SPRING  
34. 4N-8179 [1] PIN-DETENT  
35. 4L-3776 [1] BOLT (1/4-20X4.75-IN)  
36. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
37. 9S-9332 [1] FITTING-ELBOW  
38. 6N-7523 [2] WASHER (6.48X11.9X1.57-MM THK)  
39. 4F-7957 [3] BOLT (1/4-20X0.875-IN)  
40. 0S-1616 [1] BOLT (1/4-20X1-IN)  
41. 6N-5933 [1] COVER-SHUTOFF  
42. 4N-8507 [2] COVER  
43. 4N-0117 [2] GASKET-SOLENOID  
44. 8F-6302 [1] BOLT (1/4-20X3.75-IN)  
45. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28090273
 

6N-7606: PUMP GP-GOV & FUEL INJ

6N-7606 PUMP GP-GOV & FUEL INJ
FIELD REPLACEMENT FOR @@@@@ 6N-6213@@@@@
i00525304 SEBP2809
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-7614 Y [1] PUMP GP-GOV & FUEL INJ  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28090274
 

6N-7614: PUMP GP-GOV & FUEL INJ

6N-7614 PUMP GP-GOV & FUEL INJ
PART OF 6N-7606 PUMP GP-GOV & FUEL INJ
i00722535 SEBP2809
6N7614 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4710 [2] BOLT (1/4-20X4-IN)  
2. 4N-0053 [1] COVER-ADAPTER  
  4N-0159 [1] GASKET  
3. 0S-1616 [1] BOLT (1/4-20X1-IN)  
4. 6N-2843 [1] GASKET  
5. 4N-5490 [1] BASE AS-FUEL FILTER  
6. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
7. 9S-8597 [1] SPRING  
8. 6N-0509 Y [1] TORQUE CONTROL GP  
9. 6N-5355 Y [1] PUMP GP-GOV & FUEL INJ  
10. 9F-7022 [1] BOLT (1/4-20X1.5-IN)  
11. 4N-9336 [1] DISC  
12. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET-ELBOW  
13. 0S-1615 [13] BOLT (1/4-20X0.75-IN)  
14. 9F-6580 [2] BOLT (1/4-20X1.125-IN)  
15. 8S-4710 [1] BOLT (1/4-20X4-IN)  
16. 7N-0450 [1] VALVE AS  
17. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
18. 4N-4431 [1] GASKET-CHANNEL  
  6N-2810 [1] CHANNEL  
19. 4N-4351 [1] COVER-SIDE  
  4N-9057 [1] GASKET-SIDE COVER  
20. 4N-0443 [1] PIN-LOAD STOP  
21. 6N-5170 [1] SPRING  
22. 6N-0248 [1] SHAFT AS-CONTROL  
23. 4N-0444 [2] PLATE-SPACER  
24. 4N-8179 [1] PIN-DETENT  
25. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28090275
 

2W-4234: SEPARATOR GP-WATER

2W-4234 SEPARATOR GP-WATER
FOR USE WITH MARINE PROPULSION AND MARINE AUXILIARY ENGINES
AN ATTACHMENT
i00359085 SEBP2809
2W4234 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4235 [1] BASE AS  
2. 8N-1590 [1] WASHER  
3. 8F-9206 [1] SEAL-O-RING  
4. 8N-1588 [1] BOLT-SEPARATOR  
5. 2W-4273 [1] VALVE AS-VENT (FUEL, WATER SEPARATOR)  
6. 8N-1589 [1] GASKET-SEPARATOR  
7. 2W-4236 [1] CASE AS  
8. 5B-7890 [1] PLUG-PIPE  
9. 8N-1586 [1] SPRING-SEPARATOR  
10. 4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
11. 8F-4610 [1] RING-RETAINING  
12. 8N-1587 [1] SUPPORT  
13. 8N-1585 [1] SEAL-SEPARATOR  
14. 8N-0205 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
 

#SEBP28090276
 

5N-5284: SEPARATOR GP-WATER

5N-5284 SEPARATOR GP-WATER
CANNOT BE USED WITH RH OIL FILTER
AN ATTACHMENT
i00385430 SEBP2809
5N5284 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 C [1] CLAMP  
2. 8K-0968 C [1] ELBOW  
3. 2W-4331 CI [1] HOSE AS  
4. 7J-8611 B [1] ELBOW-PIPE (PIPE)  
  032-1268 B [1] CONNECTOR (90-DEG)(FLARED)  
    -OR-
  032-1267 B [1] CONNECTOR (STRAIGHT)  
5. 1J-9671 [5] SEAL-O-RING  
6. 5P-4675 [1] ADAPTER  
7. 5N-5283 [1] BRACKET-SUPPORT  
8. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
9. 6V-2611 C [2] VALVE (DRAIN)(WATER SEPARATOR)  
10. 8N-9801 C [1] BASE-SEPARATOR  
11. 9S-8003 C [1] PLUG (1/2-20-THD)  
12. 8N-9803 C [1] FILTER-FUEL (WATER SEPARATOR)(WATER SEPARATOR)  
13. 5P-5991 G HOSE (28 IN.)  
  6L-8700 [1] CLAMP  
14. 0L-1352 B [3] BOLT (3/8-16X3.25-IN)  
  1M-7163 [3] SPACER  
15. 1D-4717 B [8] NUT (3/8-16-THD)  
16. 5M-2894 BC [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 5M-8429 C [1] CLIP  
18. 0T-0102 C [1] BOLT (3/8-16X0.625-IN)  
19. 0L-1143 B [3] BOLT (3/8-16X2.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP28090277
 

7N-0950: SEPARATOR GP-WATER

7N-0950 SEPARATOR GP-WATER
AN ATTACHMENT
i00407917 SEBP2809
7N0950 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7618 [1] CLAMP  
2. 6N-7624 [1] BASE-SEPARATOR  
3. 2P-4173 C [2] VALVE-DRAIN (WATER SEPARATOR)  
4. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
5. 6N-7617 [1] FILTER-FUEL (WATER SEPARATOR)(WATER SEPARATOR)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP28090278
 

9N-6519: SEPARATOR GP-WATER

9N-6519 SEPARATOR GP-WATER
AN ATTACHMENT
i00439149 SEBP2809
9N6519 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 [1] CLAMP  
2. 8N-9801 [1] BASE-SEPARATOR  
3. 6V-2611 [2] VALVE (DRAIN)(WATER)  
4. 3K-8460 [2] PLUG (1/2-20-THD)  
5. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
6. 5P-4675 [2] ADAPTER  
7. 1J-9671 [6] SEAL-O-RING  
 

#SEBP28090279
 

6N-2554: SHUTOFF GP-MANUAL

6N-2554 SHUTOFF GP-MANUAL
GOVERNOR
PART OF 3N-8171, 5N-6116, 5N-6117 SHUTOFF GP-MECHANICAL
AN ATTACHMENT
i00406999 SEBP2809
6N2554 SHUTOFF GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2825 [1] LEVER-SHUTOFF  
2. 7J-9018 [1] BOLT-SOCKET HEAD (10-24X0.625-IN)  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
New Gasket And Cover Used On Governors
1983/04/27
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
New Gasket And Cover Used On Governors{1264}
1983/04/25
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3306 :

PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL TRANSFER
9N-5458 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-3569 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-3569 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
7C-9760 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
LINES GP-FUEL INJECTION
8N-9616 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-5971 LINES GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
6N-6213 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-6269 PUMP GP-GOV & FUEL INJ
6N-7606 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-7614 PUMP GP-GOV & FUEL INJ
SEPARATOR GP-WATER
2W-4234 SEPARATOR GP-WATER
SEPARATOR GP-WATER
5N-5284 SEPARATOR GP-WATER
SEPARATOR GP-WATER
7N-0950 SEPARATOR GP-WATER
SEPARATOR GP-WATER
9N-6519 SEPARATOR GP-WATER

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.