AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

101-8581 CYLINDER GP-RIPPER -LIFT, RH S/N 5MP1-UP; 7CP1-UP; 7DP1-UP 254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE PART OF 127-1031, 130-6458, 130-6462 RIPPER AR Type 2 AN ATTACHMENT D11R


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D11R TRACK-TYPE TRACTOR 7PZ
 D11R TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) POWERED BY 3508B Engine SEBP2817 D11R 7PZ   (1999)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BULLDOZER TILT
521-8413 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-RIPPER
101-8581 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
101-8581 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
101-8614 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
101-8614 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER
 

#SEBP28170730
 

101-8581: CYLINDER GP-RIPPER

101-8581 CYLINDER GP-RIPPER -LIFT, RH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 2
AN ATTACHMENT
i01423942 SEBP2817
1018581 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0519 [1] CYLINDER AS (RH)  
1A. 2V-0481 [1] BLOCK  
  9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 J [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER (RIPPER)  
6. 102-0691 [1] ROD AS  
6A. 9J-1175 [2] BUSHING  
6B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
7. 5P-2235 J [1] SEAL-O-RING  
8. 1U-3307 J [1] RING-BACKUP  
9. 334-2648 [1] HEAD AS  
  225-3286 [1] SEAL-WIPER  
10. 8T-6746 J [1] RING-WEAR  
11. 311-9316 J [1] SEAL AS-BUFFER  
12. 311-9317 J [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 311-9318 CJ [1] SEAL-WIPER  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 1P-4577 [4] FLANGE-HALF  
18. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  246-0635 J [1] KIT-HYDRAULIC CYLINDER  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28170731
 

101-8614: CYLINDER GP-RIPPER

101-8614 CYLINDER GP-RIPPER -LIFT, LH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 1
AN ATTACHMENT
i00464172 SEBP2817
1018614 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
3. 8C-3843 J [1] RING-WEAR  
4. 8T-6746 J [1] RING-WEAR  
5. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
6. 8C-5219 J [1] SEAL-LIP TYPE  
7. 9T-5819 [1] HEAD  
8. 102-0691 [1] ROD AS  
9. 9J-1175 [2] BUSHING  
10. 4J-4955 [1] SPACER (3X100X5-MM THK)  
11. 102-0520 [1] CYLINDER AS (LH)  
12. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
13. 5P-2235 J [1] SEAL-O-RING  
14. 1U-3307 J [1] RING-BACKUP  
15. 8C-9127 J [1] SEAL AS  
16. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
  4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 5J-8350 J [1] SEAL-U-CUP  
18. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER  
19. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
  7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
20. 1P-4577 [4] FLANGE-HALF  
21. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
22. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  132-4919 J [1] KIT-SEAL (RIPPER CYLINDER)  
    (INCLUDES HEAD SEAL, O-RING SEAL, PISTON SEAL AS & PARTS MARKED J)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28170732
 

101-8614: CYLINDER GP-RIPPER

101-8614 CYLINDER GP-RIPPER -LIFT, LH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 2
AN ATTACHMENT
i01391285 SEBP2817
1018614 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0520 [1] CYLINDER AS (LH)  
  9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 J [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER (RIPPER)  
6. 102-0691 [1] ROD AS  
6A. 9J-1175 [2] BUSHING  
6B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
7. 5P-2235 J [1] SEAL-O-RING  
8. 1U-3307 J [1] RING-BACKUP  
9. 334-2648 [1] HEAD AS  
  225-3286 [1] SEAL-WIPER  
10. 8T-6746 J [1] RING-WEAR  
11. 311-9316 CJ [1] SEAL AS-BUFFER  
12. 311-9317 CJ [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 311-9318 CJ [1] SEAL-WIPER  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 1P-4577 [4] FLANGE-HALF  
18. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  246-0635 J [1] KIT-HYDRAULIC CYLINDER  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28170733
 

130-3263: CYLINDER GP-RIPPER

130-3263 CYLINDER GP-RIPPER -TILT, RH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 1
FIELD REPLACEMENT ORDER @@@@@521-8411@@@@@
AN ATTACHMENT
i00501307 SEBP2817
1303263 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3261 [1] CYLINDER AS (RH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [1] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 9J-5037 J [1] RING-WEAR  
5. 8T-1792 J [1] SEAL AS  
6. 6E-5701 [1] PISTON  
7. 5K-1787 J [1] SEAL-O-RING  
8. 8J-0548 J [1] RING-BACKUP  
9. 8C-4892 J [1] SEAL-HEAD  
10. 6E-5702 [1] HEAD  
11. 130-3262 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
12. 9X-8897 [2] BOLT (1-8X0.42-IN)  
13. 8H-5772 [6] BOLT (1-8X3.75-IN)  
14. 5P-8250 [8] WASHER (28X49X5-MM THK)  
15. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
16. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
17. 8C-9135 J [1] SEAL-LIP TYPE  
18. 5J-8375 J [1] SEAL-U-CUP  
19. 8C-9128 J [1] SEAL AS  
20. 8T-3330 J [1] RING-WEAR  
21. 1P-4577 [4] FLANGE-HALF  
22. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
23. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  132-4997 J [1] KIT-SEAL (RIPPER TILT CYLINDER)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28170734
 

130-3263: CYLINDER GP-RIPPER

130-3263 CYLINDER GP-RIPPER -TILT, RH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 2
FIELD REPLACEMENT ORDER @@@@@521-8411@@@@@
AN ATTACHMENT
i01443719 SEBP2817
1303263 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3261 [1] CYLINDER AS (RH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 9J-5037 J [1] RING-WEAR  
5. 8T-1792 J [1] SEAL AS  
6. 6E-5701 [1] PISTON  
7. 5K-1787 J [1] SEAL-O-RING  
8. 8J-0548 J [1] RING-BACKUP  
9. 8C-4892 J [1] SEAL-HEAD  
10. 6E-5702 [1] HEAD  
11. 130-3262 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
12. 9X-8897 [2] BOLT (1-8X0.42-IN)  
13. 8H-5772 [6] BOLT (1-8X3.75-IN)  
14. 5P-8250 [8] WASHER (28X49X5-MM THK)  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 346-5196 CJ [1] SEAL-WIPER  
18. 346-5200 CJ [1] SEAL-U-CUP  
19. 167-2214 CJ [1] SEAL AS-BUFFER  
20. 8T-3330 J [1] RING-WEAR  
21. 1P-4577 [4] FLANGE-HALF  
22. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
   
    AVAILABLE REPAIR KIT(S):
  245-9840 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28170735
 

130-6381: CYLINDER GP-RIPPER

130-6381 CYLINDER GP-RIPPER -TILT, LH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 1
FIELD REPLACEMENT ORDER @@@@@521-8420@@@@@
AN ATTACHMENT
i00503063 SEBP2817
1306381 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6382 [1] CYLINDER AS (LH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 9J-5037 J [1] RING-WEAR  
5. 8T-1792 J [1] SEAL AS  
6. 6E-5701 [1] PISTON  
7. 5K-1787 J [1] SEAL-O-RING  
8. 8J-0548 J [1] RING-BACKUP  
9. 8C-4892 J [1] SEAL-HEAD  
10. 6E-5702 [1] HEAD  
11. 130-3262 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
12. 9X-8897 [2] BOLT (1-8X0.42-IN)  
13. 8H-5772 [6] BOLT (1-8X3.75-IN)  
14. 5P-8250 [8] WASHER (28X49X5-MM THK)  
15. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
16. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
17. 8C-9135 J [1] SEAL-LIP TYPE  
18. 5J-8375 J [1] SEAL-U-CUP  
19. 8C-9128 J [1] SEAL AS  
20. 8T-3330 J [1] RING-WEAR  
21. 1P-4577 [4] FLANGE-HALF  
22. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
23. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  132-4997 J [1] KIT-SEAL (RIPPER TILT CYLINDER)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28170736
 

130-6381: CYLINDER GP-RIPPER

130-6381 CYLINDER GP-RIPPER -TILT, LH
S/N 5MP1-UP; 7CP1-UP; 7DP1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 127-1031, 130-6458, 130-6462 RIPPER AR
Type 2
FIELD REPLACEMENT ORDER @@@@@521-8420@@@@@
AN ATTACHMENT
i01443712 SEBP2817
1306381 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6382 [1] CYLINDER AS (LH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 9J-5037 J [1] RING-WEAR  
5. 8T-1792 J [1] SEAL AS  
6. 6E-5701 [1] PISTON  
7. 5K-1787 J [1] SEAL-O-RING  
8. 8J-0548 J [1] RING-BACKUP  
9. 8C-4892 J [1] SEAL-HEAD  
10. 6E-5702 [1] HEAD  
11. 130-3262 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
12. 9X-8897 [2] BOLT (1-8X0.42-IN)  
13. 8H-5772 [6] BOLT (1-8X3.75-IN)  
14. 5P-8250 [8] WASHER (28X49X5-MM THK)  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 346-5196 CJ [1] SEAL-WIPER  
18. 346-5200 J [1] SEAL-U-CUP  
19. 167-2214 J [1] SEAL AS-BUFFER  
20. 8T-3330 J [1] RING-WEAR  
21. 1P-4577 [4] FLANGE-HALF  
22. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
   
    AVAILABLE REPAIR KIT(S):
  245-9840 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28170737
 

161-6615: CYLINDER GP-RIPPER

161-6615 CYLINDER GP-RIPPER -LIFT, RH
S/N 7ZP1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 161-2420 RIPPER AR
Type 1
AN ATTACHMENT
i01000616 SEBP2817
1616615 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0519 [1] CYLINDER AS (RH)  
  2V-0481 [1] BLOCK  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER  
6. 102-0691 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 9T-5819 [1] HEAD  
10. 8T-6746 [1] RING-WEAR  
11. 8C-9127 [1] SEAL AS  
12. 5J-8350 [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 8C-5219 [1] SEAL-LIP TYPE  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
18. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
19. 1P-4577 [4] FLANGE-HALF  
20. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
21. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28170738
 

161-6615: CYLINDER GP-RIPPER

161-6615 CYLINDER GP-RIPPER -LIFT, RH
S/N 7ZP1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 161-2420 RIPPER AR
Type 2
AN ATTACHMENT
i01388256 SEBP2817
1616615 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0519 [1] CYLINDER AS (RH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
1A. 9J-1175 [2] BUSHING  
  [1] TUBE AS  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER (RIPPER)  
6. 102-0691 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
6A. 9J-1175 [2] BUSHING  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 334-2648 [1] HEAD AS  
  311-9318 [1] SEAL-WIPER  
10. 8T-6746 [1] RING-WEAR  
11. 311-9316 C [1] SEAL AS-BUFFER  
12. 311-9317 C [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 311-9318 C [1] SEAL-WIPER  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 1P-4577 [4] FLANGE-HALF  
18. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28170739
 

161-6616: CYLINDER GP-RIPPER

161-6616 CYLINDER GP-RIPPER -LIFT, LH
S/N 7ZP1-UP
254-MM (10-IN) X 613-MM (24.1-IN) STROKE
PART OF 161-2420 RIPPER AR
Type 1
AN ATTACHMENT
i01000622 SEBP2817
1616616 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0520 [1] CYLINDER AS (LH)  
  2V-0481 [1] BLOCK  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER  
6. 102-0691 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 9T-5819 [1] HEAD  
10. 8T-6746 [1] RING-WEAR  
11. 8C-9127 [1] SEAL AS  
12. 5J-8350 [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 8C-5219 [1] SEAL-LIP TYPE  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
18. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
19. 1P-4577 [4] FLANGE-HALF  
20. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
21. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D11R :

CYLINDER GP-RIPPER
101-8581 CYLINDER GP-RIPPER
CYLINDER GP-BULLDOZER TILT
521-8413 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER TILT
521-8412 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER LIFT
4T-2728 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4T-2727 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
252-0475 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
252-0473 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
252-0472 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
101-8614 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
101-8614 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-6381 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-6381 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
161-6615 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
161-6615 CYLINDER GP-RIPPER

Truck sale:

Caterpillar D11R
 
Caterpillar D11R
- Crawler dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar D11R REBUILD, Crawler dozers, Construction
1,600,000 
Caterpillar D11R REBUILD, Crawler dozers, Construction
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D11R, Crawler dozers, Construction
399,000 
Caterpillar D11R, Crawler dozers, Construction
- Crawler dozers
HOLT OF CALIFORNIA
Caterpillar D11R, Rupsdozers, Bouw
1.220.000 
Caterpillar D11R, Rupsdozers, Bouw

CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar D11R, Rupsdozers, Bouw
 
Caterpillar D11R, Rupsdozers, Bouw
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.