AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

132-4654 BRACKET GP-SHIPPING S/N 1GM1-UP PART OF 157-3866, 161-9159, 161-9160 HITCH READY AR 65E CHALLENGER


DRAWBAR, THREE POINT HITCH AND PTO
BRACKET GP-SHIPPING
COUPLER GP-QUICK
DRAWBAR GP
DRIVE GP-POWER TAKE-OFF
FRAME AND BODY
DRAWBAR GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH AR

CHALLENGER 65E CHALLENGER 1GM
 Challenger 65E Agricultural Tractor 1GM00001-UP (MACHINE) POWERED BY 3176 Engine SEBP2832 65E 1GM   (1998)

DRAWBAR, THREE POINT HITCH AND PTO

BRACKET GP-SHIPPING
BRACKET GP-SHIPPING
132-4654 BRACKET GP-SHIPPING
 

#SEBP28320400
 

132-4654: BRACKET GP-SHIPPING

132-4654 BRACKET GP-SHIPPING
S/N 1GM1-UP
PART OF 157-3866, 161-9159, 161-9160 HITCH READY AR
i00495998 SEBP2832
1324654 BRACKET GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 8T-9400 [8] BOLT (7/8-9X2.5-IN)  
3. 8C-6913 [8] WASHER-HARD (24X41.5X4-MM THK)  
4. 6S-8224 [8] PLUG-PROTECTION  
 

#SEBP28320401
 

146-4348: COUPLER GP

146-4348 COUPLER GP
S/N 1GM1-UP
PART OF 139-1261, 145-9544 LINES GP-HYDRAULIC
i00563028 SEBP2832
1464348 COUPLER GP Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-4349 [2] BODY AS  
2. 146-4350 [2] SEAL  
3. 146-4351 [2] SEAL  
4. 146-4352 [2] SEAL  
5. 146-4353 [2] RING-RETAINING  
6. 146-4358 [1] LEVER AS  
7. 146-4359 [1] RING-RETAINING  
8. 146-4360 [2] SEAL  
9. 146-4361 [1] PLATE  
10. 146-4362 [2] COVER-DUST  
11. 146-4363 [2] SCREW (M6X1X25-MM)  
12. 146-4364 [1] SCREW (M6X1X10-MM)  
13. 6V-7970 [2] SEAL-O-RING  
14. 8T-7493 [2] CONNECTOR  
15. 7J-9108 [2] SEAL-O-RING  
 

#SEBP28320402
 

104-3055: COUPLER GP-QUICK

104-3055 COUPLER GP-QUICK
S/N 1GM1-UP
PART OF 136-5529, 157-3864 HITCH AR
i00472585 SEBP2832
1043055 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3463 [1] FRAME AS-COUPLER  
2. 124-6644 [2] PLATE AS  
3. 104-3465 [2] PIN AS  
4. 133-4285 [1] PIN AS  
5. 104-3467 [2] LEVER AS  
6. 104-3471 [1] HOOK AS (CATEGORY III)  
7. 104-3472 [1] HOOK AS (CATEGORY IV)  
8. 133-4287 [2] ROD AS  
9. 107-0590 [1] SPACER (19.43X24.51X19.05-MM THK)  
10. 6J-0208 [2] SPRING  
11. 3J-2801 [4] BOLT-PLOW (1-8X2.5-IN)  
12. 5P-8250 [4] WASHER (28X49X5-MM THK)  
13. 6K-3632 [4] LOCKNUT (1-8-THD)  
14. 6J-3335 [2] PIN  
15. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-4617 [4] PIN-COTTER  
17. 5P-8248 [5] WASHER-HARD (20X36.5X3.5-MM THK)  
18. 1A-8827 [2] PIN  
19. 1D-4615 [4] BOLT (3/4-10X5.5-IN)  
20. 0S-1626 [1] BOLT (3/4-10X1.5-IN)  
21. 7H-2069 [2] BOLT (3/4-10X1-IN)  
22. 104-3466 [2] BUSHING  
23. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
24. 5P-6652 [2] WASHER (20X44.5X6-MM THK)  
 

#SEBP28320403
 

197-0485: COUPLING AR

197-0485 COUPLING AR -HYDRAULIC POWER BEYOND
S/N 1GM1-UP
WITH 3 POINT HITCH
i01695655 SEBP2832
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9X-2847 [1] ADAPTER-SWIVEL  
  Y [1] COUPLING GP (HYDRAULIC POWER BEYOND)  
  6V-8724 [1] ELBOW  
  8T-6876 [1] ELBOW  
  3J-1907 [3] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6R-7605 [1] VALVE-SHUTTLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28320404
 

197-0486: COUPLING AR

197-0486 COUPLING AR -HYDRAULIC POWER BEYOND
S/N 1GM1-UP
WITHOUT 3 POINT HITCH
i01695704 SEBP2832
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6V-8636 [1] CONNECTOR  
  Y [1] COUPLING GP (HYDRAULIC POWER BEYOND)  
  6V-8724 [1] ELBOW  
  8T-0788 [1] ELBOW  
  3J-1907 [3] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6R-7605 [1] VALVE-SHUTTLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28320405
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 1GM1-UP
PART OF 157-3864 HITCH AR, 157-3866, 161-9160 HITCH READY AR, 157-3863 SPECIAL AR-WITHOUT HITCH
i00597415 SEBP2832
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 150-8766 C [2] LATCH  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOTTOM DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 135-4729 C [1] RETAINER AS  
11. 9B-7237 C [4] BOLT (3/8-16X1.25-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 135-4730 C [1] PIN (DRAWBAR)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP28320406
 

7T-3000: DRIVE GP-POWER TAKE-OFF

7T-3000 DRIVE GP-POWER TAKE-OFF
S/N 1GM1-UP; 4AY1-UP
PART OF 154-1972 KIT-POWER TAKE-OFF, 136-1053 TRANSMISSION AR
i00422065 SEBP2832
7T3000 DRIVE GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1558 [1] BOLT (1/2-20X3.25-IN)  
2. 1P-6563 [1] WASHER-RETAINING (0.531X2.559X0.48-IN THK)  
3. 7T-3063 [1] YOKE AS  
4. 3K-0196 [1] GUARD  
5. 1J-6472 [1] RING-RETAINING  
6. 1T-0043 [1] BALL BEARING  
7. 9H-6079 [1] SEAL-LIP TYPE  
8. 0S-1594 [7] BOLT (3/8-16X1-IN)  
9. 7T-3061 [1] HOUSING-CLUTCH  
10. 8M-4435 [1] SEAL-O-RING  
11. 2M-9780 [1] SEAL-O-RING  
12. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
13. 8P-4922 [3] RING-SEAL  
14. 7T-3058 [1] RING-SEAL  
15. 0S-1590 [2] BOLT (3/8-16X2-IN)  
16. 1T-0132 [1] SEAL-O-RING  
17. 5P-8191 C [3] RING-RETAINING  
18. 7T-3062 [1] MANIFOLD-CLUTCH  
19. 7T-3067 [1] RING-SEAL  
20. 6Y-7981 [8] DISC-FRICTION  
21. 7T-3057 [1] PISTON-CLUTCH  
22. 3P-1608 [1] RING-RETAINING  
23. 3P-0337 [6] PLATE-CLUTCH  
24. 3P-0335 [1] PLATE-CLUTCH PRESSURE  
25. 4M-9592 [10] SPRING  
26. 7T-3059 [1] HUB-CLUTCH  
27. 1T-0795 [1] RING-RETAINING  
28. 5D-1921 [1] RING-RETAINING  
29. 7T-3055 [1] SHAFT AS  
30. 3S-2938 [1] BUSHING  
31. 7T-3056 [1] HUB-CLUTCH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP28320407
 

3W-5023: FRAME GP-DRAWBAR

3W-5023 FRAME GP-DRAWBAR
S/N 1GM1-UP
PART OF 157-3863 SPECIAL AR-WITHOUT HITCH
i00365855 SEBP2832
3W5023 FRAME GP-DRAWBAR Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6125 [1] SUPPORT AS  
2. 8T-9400 C [12] BOLT (7/8-9X2.5-IN)  
3. 8C-6913 C [12] WASHER-HARD (24X41.5X4-MM THK)  
4. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6K-1510 [2] STOP  
7. 125-5542 [1] PLATE-WEAR  
8. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
9. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
10. 8T-9393 [2] BOLT (5/8-11X1.5-IN)  
11. 6S-8224 [4] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP28320408
 

136-5529: HITCH AR

136-5529 HITCH AR
S/N 1GM1-UP
i00653889 SEBP2832
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  136-5521 Y [1] MOUNTING GP-CONTROL  
  104-3055 Y [1] COUPLER GP-QUICK  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  113-7308 Y [1] HITCH GP-3 POINT  
  145-9564 Y [1] LINES GP-HYDRAULIC  
  136-5507 Y [1] SENSOR GP-SPEED  
  124-4803 Y [1] KIT-3 POINT HITCH VALVE  
   
  8C-4399 [1] FILM-WARNING (IMPROPERLY COUPLED IMPL)  
    (ON REAR SURFACE OF QUICK HITCH)
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
    (ON INSIDE SURFACE OF OPERATOR COMPARTMENT DOOR)
   
  8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
    (FOR MOUNTING BANK VALVE TO ANGLE AS)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28320409
 

157-3864: HITCH AR

157-3864 HITCH AR
S/N 1GM1-UP
i01378849 SEBP2832
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] CAB GP  
  104-3055 Y [1] COUPLER GP-QUICK  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  9U-1695 Y [1] DRAWBAR GP-SWINGING  
  136-6075 Y [1] GUARD GP-REAR  
  113-7308 Y [1] HITCH GP-3 POINT  
  145-9544 Y [1] LINES GP-HYDRAULIC  
  145-9564 Y [1] LINES GP-HYDRAULIC  
  136-5507 Y [1] SENSOR GP-SPEED  
  152-2138 Y [1] VALVE GP-BANK 5  
    S/N 1GM1-218
  173-6972 Y [1] VALVE GP-BANK 5  
    S/N 1GM219-UP
   
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
    (ON INSIDE SURFACE OF OPERATOR COMPARTMENT DOOR)
  8C-4399 [1] FILM-WARNING (IMPROPERLY COUPLED IMPL)  
    (ON REAR SURFACE OF QUICK HITCH)
   
  8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
    (FOR MOUNTING BANK VALVE TO ANGLE AS)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 65E :

113-7273 ADAPTER GP-POWER TAKE-OFF
136-5410 ADAPTER GP-3 POINT HITCH
VALVE GP-SOLENOID
100-3915 VALVE GP-SOLENOID
8J-6875 VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
152-2646 VALVE GP-SHUTTLE
VALVE GP-RELIEF
9T-1819 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
6E-6568 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
168-2210 VALVE GP-PUMP CONTROL
COUPLER GP
146-4348 COUPLER GP
COUPLER GP-QUICK
104-3055 COUPLER GP-QUICK
197-0485 COUPLING AR
197-0486 COUPLING AR
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRIVE GP-POWER TAKE-OFF
7T-3000 DRIVE GP-POWER TAKE-OFF
FRAME GP-DRAWBAR
3W-5023 FRAME GP-DRAWBAR
136-5529 HITCH AR

Truck sale:

 
 
Caterpillar 65E
- tractors
ZIEGLER AG EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.