DRAWBAR, THREE POINT HITCH AND PTO
HITCH ARHITCH GP-3 POINT
POWER TAKE-OFF GP
HITCH GP-3 POINT
DRAWBAR, THREE POINT HITCH AND PTO
HITCH AR#SEBP28320410
198-6814: HITCH AR
198-6814 HITCH AR
S/N 1GM1-UP
S/N 1GM1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS#SEBP28320411
113-7308: HITCH GP-3 POINT
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-7235 | [1] | SUPPORT AS | |
| 7T-1099 | [2] | LINK | ||
| 2. | 5P-2228 | [6] | BOLT (1/2-13X1-IN) | |
| 3. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 5G-9977 | [3] | BAR | |
| 5. | 102-4634 | [1] | SHAFT AS-ROCKER ARM | |
| 6. | 6K-7983 | [2] | BUSHING | |
| 7. | 8F-9836 | [1] | BOSS (3/8-16-THD) | |
| 8. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 6L-1698 | [2] | SPACER (13.87X21.34X12.7-MM THK) | |
| 10. | 4E-5112 | [2] | PIN AS | |
| 11. | 4E-7872 Y | [1] | LINK GP (PITCH CONTROL) | |
| 12. | 7X-0341 | [2] | BOLT (1/2-13X7-IN) | |
| 13. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 14. | 1B-4287 | [2] | WASHER (14.3X58.7X5-MM THK) | |
| 15. | 4E-7866 Y | [2] | LINK GP (LIFT) | |
| 16. | 7X-0346 | [8] | BOLT (5/8-11X2-IN) | |
| 17. | 8T-4122 | [28] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 3W-7265 | [2] | BLOCK | |
| 19. | 3W-7218 | [4] | PLATE | |
| 20. | 8D-7424 | [12] | SPACER (48X81X6-MM THK) | |
| 21. | 8T-9393 | [16] | BOLT (5/8-11X1.5-IN) | |
| 22. | 3W-7266 | [2] | BLOCK | |
| 23. | 5P-2566 | [2] | BOLT (1/2-13X1.5-IN) | |
| 24. | 8C-6913 | [16] | WASHER-HARD (24X41.5X4-MM THK) | |
| 25. | 8C-6362 | [4] | BOLT (5/8-11X2.75-IN) | |
| 26. | 3W-7897 B | [8] | SPACER | |
| 27. | 8T-9400 | [16] | BOLT (7/8-9X2.5-IN) | |
| 28. | 4E-5114 | [2] | PIN | |
| 29. | 3W-7212 | [2] | BLOCK | |
| 30. | 3W-7255 | [4] | SPACER (47X80X10-MM THK) | |
| 31. | 3B-8491 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 32. | 4E-5110 | [2] | PIN AS | |
| 33. | 3W-7264 | [2] | PIN | |
| 34. | 7X-0537 | [4] | WASHER-HARD (40.5X67X6-MM THK) | |
| 35. | 3B-5324 | [2] | PIN-COTTER | |
| 36. | 8T-9383 | [2] | BOLT (1/2-13X0.75-IN) | |
| 37. | 7X-0618 | [2] | WASHER-HARD (13.5X40X5-MM THK) | |
| 38. | 5G-9975 | [1] | PIN | |
| 39. | 188-2757 | [2] | LINK AS-LOWER | |
| (EACH INCLUDES) | ||||
| 40. | 186-0974 | [1] | BALL JOINT AS | |
| 41. | 186-0975 | [1] | BALL JOINT AS | |
| 42. | 4L-8183 | [2] | SPACER (0.656X1.125X0.38-IN THK) | |
| 43. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 44. | 6K-1510 | [2] | STOP | |
| 45. | 7X-0515 | [4] | WASHER-HARD (17X35X5-MM THK) | |
| 46. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 47. | 125-5543 | [1] | PLATE-WEAR (DRAWBAR SUPPORT W/HITCH) | |
| 48. | 7X-0353 | [2] | BOLT (5/8-11X4.25-IN) | |
| 49. | 7X-0448 | [2] | NUT (5/8-11-THD) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320412
157-3866: HITCH READY AR
157-3866 HITCH READY AR
S/N 1GM1-UP
S/N 1GM1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 136-5410 Y | [1] | ADAPTER GP-3 POINT HITCH | ||
| 132-4654 Y | [1] | BRACKET GP-SHIPPING | ||
| Y | [1] | CAB GP | ||
| 9U-1695 Y | [1] | DRAWBAR GP-SWINGING | ||
| 136-6075 Y | [1] | GUARD GP-REAR | ||
| 139-1261 Y | [1] | LINES GP-HYDRAULIC | ||
| 152-2136 Y | [1] | VALVE GP-BANK 4 | ||
| 173-6969 Y | [1] | VALVE GP-BANK | ||
| 8T-7008 | [2] | BOLT (3/8-16X3-IN) | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320413
161-9159: HITCH READY AR
161-9159 HITCH READY AR
S/N 1GM1-UP
S/N 1GM1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 136-5410 Y | [1] | ADAPTER GP-3 POINT HITCH | ||
| 132-4654 Y | [1] | BRACKET GP-SHIPPING | ||
| Y | [1] | CAB GP | ||
| 136-6075 Y | [1] | GUARD GP-REAR | ||
| 145-9544 Y | [1] | LINES GP-HYDRAULIC | ||
| 152-2136 Y | [1] | VALVE GP-BANK 4 | ||
| 173-6969 Y | [1] | VALVE GP-BANK | ||
| 8T-7008 | [2] | BOLT (3/8-16X3-IN) | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320414
161-9160: HITCH READY AR
161-9160 HITCH READY AR
S/N 1GM1-UP
S/N 1GM1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 132-4654 Y | [1] | BRACKET GP-SHIPPING | ||
| Y | [1] | CAB GP | ||
| 9U-1695 Y | [1] | DRAWBAR GP-SWINGING | ||
| 136-6075 Y | [1] | GUARD GP-REAR | ||
| 139-1261 Y | [1] | LINES GP-HYDRAULIC | ||
| 161-9012 Y | [1] | LINES GP-HYDRAULIC | ||
| 136-5507 Y | [1] | SENSOR GP-SPEED | ||
| 152-2138 Y | [1] | VALVE GP-BANK 5 | ||
| S/N 1GM1-218 | ||||
| 173-6972 Y | [1] | VALVE GP-BANK 5 | ||
| S/N 1GM219-UP | ||||
| 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | ||
| 8C-4977 | [1] | FILM-WARNING (HITCH CONT IN HOOK-UP MODE) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320415
204-8062: KIT-3 POINT HITCH
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-3017 | [2] | PIN AS | |
| 2. | 200-0010 | [2] | SPACER (17.5X25.4X12.5-MM THK) | |
| 3. | 204-8060 | [1] | PLATE | |
| 4. | 204-8061 | [1] | PLATE | |
| 5. | 204-8063 | [2] | PLATE | |
| 6. | 205-4644 | [1] | BRACKET AS | |
| 7. | 193-4472 Y | [1] | LINK GP-UPPER | |
| 8. | 210-7486 | [1] | PLATE AS | |
| 9. | 210-7487 | [1] | PLATE AS | |
| 10. | 3V-9244 | [2] | WASHER (16.5X50X5-MM THK) | |
| 11. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320416
204-8062: KIT-3 POINT HITCH
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-3017 | [2] | PIN AS | |
| 2. | 200-0010 | [2] | SPACER (17.5X25.4X12.5-MM THK) | |
| 3. | 204-8060 | [1] | PLATE | |
| 4. | 204-8061 | [1] | PLATE | |
| 5. | 204-8063 | [2] | PLATE | |
| 6. | 205-4644 | [1] | BRACKET AS | |
| 7. | 210-7481 CY | [1] | LINK GP-UPPER | |
| 8. | 210-7486 | [1] | PLATE AS | |
| 9. | 210-7487 | [1] | PLATE AS | |
| 10. | 3V-9244 | [2] | WASHER (16.5X50X5-MM THK) | |
| 11. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320417
124-4803: KIT-3 POINT HITCH VALVE
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9T-1799 Y | [1] | VALVE GP-CONTROL | ||
| 5B-9318 | [1] | BALL | ||
| 0S-1608 | [3] | BOLT (3/8-16X3.75-IN) | ||
| 3B-1915 | [1] | BOLT (3/8-16X1.375-IN) | ||
| 103-6097 | [1] | COVER | ||
| 105-1589 | [1] | MANIFOLD AS | ||
| 5B-9318 | [1] | BALL | ||
| 7J-0204 | [1] | SEAL-O-RING | ||
| 8T-2360 | [1] | SEAL-O-RING | ||
| 4T-4526 | [1] | SEAT | ||
| 2Y-5829 M | [1] | NUT (M10X1.5-THD) | ||
| 6J-3134 | [1] | SEAL-O-RING | ||
| 4D-9986 | [4] | SEAL-O-RING | ||
| 8T-2360 | [1] | SEAL-O-RING | ||
| 6V-5326 | [1] | SEAL-O-RING | ||
| 4J-5267 | [2] | SEAL-O-RING | ||
| 4J-5140 | [2] | SEAL-O-RING | ||
| 7J-0204 | [1] | SEAL-O-RING | ||
| 2K-8199 | [2] | SEAL-O-RING | ||
| 4T-4526 | [1] | SEAT | ||
| 4T-4517 | [3] | STUD | ||
| 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320418
154-1972: KIT-POWER TAKE-OFF
154-1972 KIT-POWER TAKE-OFF
S/N 1GM1-UP
S/N 1GM1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 113-7270 Y | [1] | CONTROL GP-POWER TAKE-OFF | ||
| 7T-3000 Y | [1] | DRIVE GP-POWER TAKE-OFF | ||
| 149-1457 Y | [1] | LINES GP-POWER TAKE-OFF | ||
| 113-7271 Y | [1] | MOUNTING GP-POWER TAKE-OFF | ||
| 147-9435 Y | [1] | POWER TAKE-OFF GP | ||
| 3W-5101 Y | [1] | SHAFT GP-POWER TAKE-OFF | ||
| 9W-0664 Y | [1] | VALVE GP-MODULATING | ||
| 7X-0293 | [2] | BOLT (3/8-16X4.75-IN) | ||
| 147-7308 | [1] | FILM-INSTRUCTION | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28320419
149-1457: LINES GP-POWER TAKE-OFF
149-1457 LINES GP-POWER TAKE-OFF
S/N 1GM1-UP
PART OF 154-1972 KIT-POWER TAKE-OFF, 139-8599 POWER TAKE-OFF AR
S/N 1GM1-UP
PART OF 154-1972 KIT-POWER TAKE-OFF, 139-8599 POWER TAKE-OFF AR
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-6769 | [1] | TUBE AS | |
| 2. | 3W-6770 | [1] | TUBE AS | |
| 3. | 5P-1947 | [2] | CONNECTOR | |
| 4. | 8C-3446 | [1] | VALVE-SAMPLING | |
| 5. | 8C-3447 | [1] | CAP-DUST | |
| 6. | 8T-6659 | [1] | ADAPTER | |
| 7. | 8T-6660 | [1] | ADAPTER | |
| 8. | 8T-8902 | [1] | ADAPTER-TEE | |
| 9. | 8T-9041 | [1] | CONNECTOR | |
| 10. | 9M-0164 | [4] | CLAMP-HOSE | |
| 11. | 149-2358 | [1] | TUBE AS | |
| 12. | I | [1] | HOSE AS | |
| 13. | 2M-9780 | [1] | SEAL-O-RING | |
| 14. | 3D-2824 | [2] | SEAL-O-RING | |
| 15. | 3J-1907 | [3] | SEAL-O-RING | |
| 16. | 3J-7354 | [4] | SEAL-O-RING | |
| 17. | 4J-5477 | [5] | SEAL-O-RING | |
| 18. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 19. | 5P-1404 | [1] | ADAPTER | |
| 20. | 5P-9617 | [1] | ADAPTER | |
| 21. | 6K-6307 | [2] | SEAL-O-RING | |
| 22. | 6V-8397 | [5] | SEAL-O-RING | |
| 23. | 6V-8628 | [1] | ELBOW | |
| 24. | 6V-8773 | [2] | TEE-FACE SEAL | |
| 25. | 6V-8774 | [1] | TEE | |
| 26. | 8C-8988 | [1] | ELBOW | |
| 27. | 8M-2773 | [1] | CLIP (LOOP) | |
| 28. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 29. | 5P-1291 E | HOSE (13CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
