FUEL SYSTEM
FILTER GP-FUELLINES GP-FUEL
LINES GP-FUEL INJECTION
CONTROL GP-GOVERNOR
PUMP GP-FUEL TRANSFER
FUEL SYSTEM
FILTER GP-FUEL#SEBP28350140
133-5671: FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
S/N 1SM1-UP
PART OF 136-4552, 159-1801 FILTER GP-WATER SEP & FUEL
S/N 1SM1-UP
PART OF 136-4552, 159-1801 FILTER GP-WATER SEP & FUEL
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-4367 | [1] | BASE AS | |
| 2. | 513-4490 | [1] | FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY) | |
| 3. | 129-0375 | [1] | BOWL AS-WATER COLLECTION (FUEL FILTER, WATER SEPARATOR) | |
| -OR- | ||||
| 155-2629 A | [1] | BOWL AS-WATER COLLECTION (12-VOLT HEATER) | ||
| -OR- | ||||
| 157-1206 A | [1] | BOWL AS-WATER COLLECTION (24-VOLT HEATER) | ||
| 141-0284 | [1] | KIT-FUEL FILTER & WATER SEP | ||
| (INCLUDES SEAL & GASKET) | ||||
| A | NOT PART OF THIS GROUP | |||
#SEBP28350141
136-4552: FILTER GP-WATER SEP & FUEL
136-4552 FILTER GP-WATER SEP & FUEL
S/N 1SM1-UP
PART OF 136-5105 INSTALLATION AR-ENGINE
S/N 1SM1-UP
PART OF 136-5105 INSTALLATION AR-ENGINE
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-9829 I | [1] | HOSE AS | |
| 2. | 133-5671 Y | [1] | FILTER GP-WATER SEP & FUEL | |
| 3. | 3K-0360 | [5] | SEAL-O-RING | |
| 4. | 1S-0994 | [2] | CLIP (LOOP) | |
| 5. | 6V-8398 | [2] | SEAL-O-RING | |
| 6. | 6V-9002 | [1] | ELBOW | |
| 7. | 8D-9671 | [1] | CLIP | |
| 8. | 8T-0077 | [1] | CONNECTOR | |
| 9. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 11. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 13. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28350142
159-1801: FILTER GP-WATER SEP & FUEL
159-1801 FILTER GP-WATER SEP & FUEL
S/N 1SM1-UP
PART OF 164-5543 INSTALLATION AR-ENGINE
S/N 1SM1-UP
PART OF 164-5543 INSTALLATION AR-ENGINE
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-5671 Y | [1] | FILTER GP-WATER SEP & FUEL | |
| 2. | 178-7905 I | [1] | HOSE AS | |
| 3. | 154-9622 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 3K-0360 | [4] | SEAL-O-RING | |
| 5. | 1S-0994 | [2] | CLIP (LOOP) | |
| 6. | 6V-8398 | [2] | SEAL-O-RING | |
| 7. | 6V-9002 | [1] | ELBOW | |
| 8. | 8D-9671 | [1] | CLIP | |
| 9. | 8T-0077 | [1] | CONNECTOR | |
| 10. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4196 M | [6] | BOLT (M10X1.5X35-MM) | |
| 14. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28350143
116-5434: FITTING GP-FUEL LINES
116-5434 FITTING GP-FUEL LINES
S/N 6AR1190-UP
PART OF 160-8595 ENGINE AR-COMPLETE
S/N 6AR1190-UP
PART OF 160-8595 ENGINE AR-COMPLETE
Parts for your 95E CHALLENGER:
CATERPILLAR SIS#SEBP28350144
117-0183: FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
S/N 6AR1190-UP
NUMBER 10 STRAIGHT FUEL INLET FITTING WITHOUT BLEED AND HAS 7/8-14X45-DEG FLARE
PART OF 160-8595 ENGINE AR-COMPLETE
S/N 6AR1190-UP
NUMBER 10 STRAIGHT FUEL INLET FITTING WITHOUT BLEED AND HAS 7/8-14X45-DEG FLARE
PART OF 160-8595 ENGINE AR-COMPLETE
Parts for your 95E CHALLENGER:
CATERPILLAR SIS#SEBP28350145
136-6063: LINES GP-FUEL
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0372 | [1] | LOCK PIN | |
| 2. | 5P-1046 | [1] | CONNECTOR | |
| 3. | 5P-0597 | [4] | CLAMP-HOSE | |
| 4. | 5P-4924 | [1] | ELBOW | |
| 5. | 5P-4961 | [12] | CLAMP-HOSE | |
| 6. | 7K-1181 | [6] | STRAP-CABLE | |
| 7. | 9L-0945 | [2] | U-BOLT | |
| 8. | 4W-3588 | [1] | BRACKET | |
| 9. | 124-6809 | [1] | VALVE-BALL | |
| 10. | 156-2525 | [1] | VALVE-SHUTOFF | |
| 11. | 136-4912 | [1] | HOSE-FUEL | |
| 12. | 136-4938 | [1] | HOSE-FUEL | |
| 13. | 162-4208 I | [1] | HOSE AS | |
| 14. | 136-4954 | [1] | HOSE-FUEL | |
| 15. | 138-2852 | [2] | ELBOW | |
| 16. | 138-2857 | [1] | HOSE-FUEL | |
| 17. | 138-2969 | [1] | HOSE-FUEL | |
| 18. | 140-6494 I | [1] | HOSE AS | |
| 19. | 140-6495 I | [1] | HOSE AS | |
| 20. | 140-6502 | [1] | HOSE-FUEL | |
| 21. | 145-9566 | [1] | TUBE | |
| 22. | 148-3556 | [1] | HOSE | |
| 23. | 148-3557 | [1] | HOSE | |
| 24. | 148-5459 I | [1] | HOSE AS | |
| 25. | 149-2847 | [1] | FITTING | |
| 26. | 156-3722 C | [1] | COUPLING AS | |
| 27. | 1A-2457 | [1] | PIN-CLEVIS | |
| 28. | 1S-0994 | [2] | CLIP (LOOP) | |
| 29. | 3J-1907 C | [4] | SEAL-O-RING | |
| 30. | 8M-2773 | [7] | CLIP (LOOP) | |
| 31. | 4D-8309 | [2] | RING-RETAINING | |
| 32. | 8T-0119 | [1] | ELBOW | |
| 33. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 34. | 5K-5338 | [7] | CLIP | |
| 35. | 5M-3062 | [5] | BOLT (3/8-16X0.75-IN) | |
| 36. | 5S-7379 | [10] | BOLT (3/8-16X0.875-IN) | |
| 37. | 6D-4244 | [2] | CLIP | |
| 38. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 39. | 6V-8397 | [6] | SEAL-O-RING | |
| 40. | 6V-8398 | [2] | SEAL-O-RING | |
| 41. | 6V-8636 | [2] | CONNECTOR | |
| 42. | 8T-4896 | [17] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 43. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 44. | 3K-0360 | [3] | SEAL-O-RING | |
| 45. | 6V-8639 | [1] | CONNECTOR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP28350146
116-5400: LINES GP-FUEL INJECTION
116-5400 LINES GP-FUEL INJECTION
S/N 6AR1190-2698
PART OF 160-8595 ENGINE AR-COMPLETE
S/N 6AR1190-2698
PART OF 160-8595 ENGINE AR-COMPLETE
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-0179 | [1] | MANIFOLD-FUEL | |
| 2. | 6V-5218 M | [5] | BOLT (M8X1.25X35-MM) | |
| 3. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 8T-0276 M | [2] | BOLT (M8X1.25X45-MM) | |
| 5. | 104-1706 | [1] | VALVE-REGULATOR | |
| 6. | 104-1729 | [1] | SPRING | |
| 7. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 8. | 3J-1907 | [5] | SEAL-O-RING | |
| 9. | 9S-8004 | [3] | PLUG (9/16-18-THD) | |
| 10. | 116-5416 I | [1] | HOSE AS | |
| 11. | 4J-7533 | [1] | SEAL-O-RING | |
| 12. | 9S-8001 | [1] | PLUG | |
| 13. | 5P-3456 | [6] | SEAL-O-RING | |
| 14. | 3P-0647 | [2] | SEAL-O-RING | |
| 15. | 030-7947 | [1] | ELBOW | |
| 16. | 8M-2773 | [1] | CLIP (LOOP) | |
| 17. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 18. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 116-5418 I | [1] | HOSE AS | |
| 20. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 21. | 133-3536 | [1] | BASE AS-FUEL FILTER | |
| 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP28350147
116-5400: LINES GP-FUEL INJECTION
116-5400 LINES GP-FUEL INJECTION
S/N 6AR1190-UP
PART OF 160-8595 ENGINE AR-COMPLETE
S/N 6AR1190-UP
PART OF 160-8595 ENGINE AR-COMPLETE
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-0179 | [1] | MANIFOLD-FUEL | |
| 2. | 6V-5218 M | [5] | BOLT (M8X1.25X35-MM) | |
| 3. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 8T-0276 M | [2] | BOLT (M8X1.25X45-MM) | |
| 5. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 6. | 3J-1907 | [2] | SEAL-O-RING | |
| 7. | 183-3408 | [3] | PLUG AS | |
| 8. | 116-5416 I | [1] | HOSE AS | |
| 9. | 5P-3456 | [6] | SEAL-O-RING | |
| 10. | 6V-8676 C | [1] | SEAL-O-RING | |
| 11. | 030-7947 | [1] | ELBOW | |
| 12. | 8M-2773 | [1] | CLIP (LOOP) | |
| 13. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 14. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 116-5418 I | [1] | HOSE AS | |
| 16. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 17. | 238-6780 C | [1] | BASE AS-FUEL FILTER | |
| 17A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 18. | 233-6742 CY | [1] | VALVE GP-CHECK (FUEL) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28350148
136-5521: MOUNTING GP-CONTROL
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2D-6235 | [1] | LOCKNUT (1/4-20-THD) | |
| 2. | 3S-2093 | [9] | STRAP-CABLE | |
| 3. | 3W-6756 | [1] | KNOB | |
| 4. | 3W-6757 | [1] | PLATE AS | |
| 9V-7451 | [1] | NUT-WELD (1/4-20-THD) | ||
| 6. | 6V-8185 | [5] | NUT (1/4-20-THD) | |
| 7. | 8T-8908 | [5] | BOLT (1/4-20X1-IN) | |
| 8. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 116-4236 | [1] | PLUG AS-CODE | |
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES WEDGE & RECEPTACLE AS) | ||||
| 10. | 120-9131 Y | [1] | CONTROL GP-3 POINT HITCH | |
| 11. | 148-6435 | [1] | CONTROL GP-HITCH | |
| 12. | 136-5487 | [1] | HARNESS AS-HITCH | |
| 13. | 147-1413 | [1] | SWITCH AS (HITCH MODE) | |
| 180-4683 | [1] | ACTUATOR | ||
| 148-9708 | [2] | LAMP (12-VOLT) | ||
| 14. | 147-1414 | [1] | SWITCH AS (SET POINT) | |
| 147-1408 | [1] | ACTUATOR | ||
| 148-9708 | [2] | LAMP (12-VOLT) | ||
| 15. | 129-6466 | [1] | SWITCH AS-ROLLER (THROTTLE) | |
| 8F-1434 | [2] | LOCKWASHER | ||
| 6V-8363 | [2] | SCREW (10-32X0.312-IN) | ||
| 16. | 9X-0199 | [1] | BOOT-SWITCH | |
| 17. | 2H-3922 | [1] | LOCKWASHER | |
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 18. | 147-7305 | [1] | FILM-INSTRUCTION | |
| 19. | 147-7306 | [1] | FILM-INSTRUCTION | |
| 20. | 147-7307 | [1] | FILM-INSTRUCTION | |
| 21. | 148-3748 | [1] | FILM-IDENTIFICATION | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28350149
116-5428: PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
S/N 6AR1190-UP
PART OF 160-8594 ENGINE AR-CORE
Type 1
S/N 6AR1190-UP
PART OF 160-8594 ENGINE AR-CORE
Type 1
Parts for your 95E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-5431 | [1] | PUMP GP-FUEL TRANSFER | |
| 2. | 8T-1159 M | [2] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 3. | 6D-1004 | [1] | GASKET | |
| 4. | 2R-6806 | [1] | CONNECTOR | |
| 5. | 3J-1907 | [1] | SEAL-O-RING | |
| 6. | 116-5417 | [1] | TUBE AS-FUEL SUPPLY | |
| 7. | 5P-9297 | [1] | CLIP | |
| 8. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 10. | 092-2570 | [2] | WASHER-SEALING | |
| M | METRIC PART | |||
Information:
FUEL SYSTEM
FILTER GP-FUEL
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter/Water Separator - Clean/Replace
65E, 75E, 85E and 95E Agricultural Tractors
65E, 75E, 85E and 95E Agricultural Tractors
Special Instruction
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Service Magazine
