BASIC ENGINE
PISTON & ROD GPHOUSING GP-FRONT
CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
HOUSING GP-FLYWHEEL
POWER TAKE-OFF GP
PULLEY GP
BASIC ENGINE
PISTON & ROD GP#SEBP28390150
134-3071: PISTON & ROD GP
134-3071 PISTON & ROD GP
COMPRESSION RATIO 16:1, JET AS-PISTON EFFECTIVE 7RC483-UP, 3LW175-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
COMPRESSION RATIO 16:1, JET AS-PISTON EFFECTIVE 7RC483-UP, 3LW175-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 393-8990 | [1] | CROWN AS-PISTON | |
| 2. | 284-6039 | [1] | SKIRT-PISTON | |
| 3. | 168-7246 | [1] | PIN-PISTON | |
| 4. | 7E-1177 | [2] | RETAINER-PIN | |
| 5. | 9Y-6054 | [1] | ROD AS-CONNECTING | |
| 5A. | 6I-2726 | [1] | BUSHING | |
| 5B. | 219-4458 | [2] | PIN-DOWEL | |
| 5C. | 7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | |
| 6. | 153-4101 | [1] | RING-PISTON (TOP) | |
| 7. | 147-1730 | [1] | RING-PISTON (INTERMEDIATE) | |
| 8. | 139-8505 | [1] | RING-PISTON (OIL) | |
| 9. | 328-5573 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 10. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 11. | 277-3076 | [1] | TUBE AS-OIL JET | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP28390151
353-9978: PLATE AS-FRONT HOUSING
353-9978 PLATE AS-FRONT HOUSING
PART OF 137-5922 HOUSING GP-FRONT
AN ATTACHMENT
PART OF 137-5922 HOUSING GP-FRONT
AN ATTACHMENT
#SEBP28390152
353-9979: PLATE AS-FRONT HOUSING
353-9979 PLATE AS-FRONT HOUSING
PART OF 186-2377 HOUSING GP-FRONT
AN ATTACHMENT
PART OF 186-2377 HOUSING GP-FRONT
AN ATTACHMENT
#SEBP28390153
145-6851: PLUG GP-CYLINDER BLOCK
145-6851 PLUG GP-CYLINDER BLOCK
CANNOT BE USED WITH AIR COMPRESSOR OR PUMP DRIVE
AN ATTACHMENT
CANNOT BE USED WITH AIR COMPRESSOR OR PUMP DRIVE
AN ATTACHMENT
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP28390154
110-1116: PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
AN ATTACHMENT
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
AN ATTACHMENT
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | |
| (INSTALL PLUG IN THE FORWARD RH CORNER OF THE HEAD) | ||||
#SEBP28390155
160-8330: PLUG GP-ENGINE
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) |
#SEBP28390156
135-8015: PLUG GP-FLYWHEEL HOUSING
135-8015 PLUG GP-FLYWHEEL HOUSING
FOR USE WITH @@@@@130-4680@@@@@, @@@@@135-7634@@@@@
CANNOT BE USED WITH @@@@@120-7699@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@130-4680@@@@@, @@@@@135-7634@@@@@
CANNOT BE USED WITH @@@@@120-7699@@@@@
AN ATTACHMENT
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP28390157
2W-4909: POWER TAKE-OFF GP
2W-4909 POWER TAKE-OFF GP
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP28390158
5N-3335: POWER TAKE-OFF GP
5N-3335 POWER TAKE-OFF GP
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
#SEBP28390159
158-2770: PULLEY GP-AUXILIARY DRIVE
158-2770 PULLEY GP-AUXILIARY DRIVE
FOR USE WHEN A 4-GROOVE PULLEY IS USED ON THE FAN DRIVE
AN ATTACHMENT
FOR USE WHEN A 4-GROOVE PULLEY IS USED ON THE FAN DRIVE
AN ATTACHMENT
Parts for your 3456 INDUSTRIAL ENGINE:
CATERPILLAR SISInformation:
BASIC ENGINE
PISTON & ROD GP
Engine News
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
Testing and Adjusting
Disassembly and Assembly
Caterpillar Parts SIS Catalog 3456 :
Truck sale:
165,000
Caterpillar 3456, Stationary Generator Sets, Construction
- Stationary Generator Sets
PANTROPIC POWER SYSTEMS
- Stationary Generator Sets
PANTROPIC POWER SYSTEMS
290,665
Caterpillar 3456, mobile generator sets, Construction
- mobile generator sets
TOROMONT POWER SYSTEMS
- mobile generator sets
TOROMONT POWER SYSTEMS
Caterpillar 3456, Stationary Generator Sets, Construction
- Stationary Generator Sets
STOWERS POWER SYSTEMS
- Stationary Generator Sets
STOWERS POWER SYSTEMS


