AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-1149 GOVERNOR GP-UNIT INJECTOR S/N 4TF29290-UP PART OF 120-7719 ENGINE AR 320B EXCAVATOR


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
LINES GP-FUEL RATIO CONTROL

EXCAVATOR 320B EXCAVATOR 1XS
 320B, 320B L, 320B LN, 320B N & 320B S Excavators 1XS00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2840 320B 1XS   (1996)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
144-3464 GOVERNOR GP
129-1149 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-0721 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-0721 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
151-0960 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
SUPPORT GP-GOVERNOR CONTROL
123-2382 SUPPORT GP-GOVERNOR CONTROL
 

#SEBP28400140
 

129-1149: GOVERNOR GP-UNIT INJECTOR

129-1149 GOVERNOR GP-UNIT INJECTOR
S/N 4TF29290-UP
PART OF 120-7719 ENGINE AR
i00522551 SEBP2840
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  131-0721 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400141
 

130-7323: GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 4TF29290-UP
PART OF 131-0721 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00503631 SEBP2840
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 5C-8312 M [1] NUT (M4X0.7-THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP28400142
 

131-0721: GOVERNOR GP-UNIT INJECTOR

131-0721 GOVERNOR GP-UNIT INJECTOR
S/N 4TF29290-UP
PART OF 144-3464 GOVERNOR GP, 129-1149 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00506716 SEBP2840
1310721 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7323 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 131-1445 [1] CAM-TORQUE  
3. 7E-9759 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
7. 4P-6493 [1] PLATE-INFORMATION (GOVERNOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400143
 

131-0721: GOVERNOR GP-UNIT INJECTOR

131-0721 GOVERNOR GP-UNIT INJECTOR
S/N 4TF29290-UP
PART OF 144-3464 GOVERNOR GP
ALSO AN ATTACHMENT
i00965417 SEBP2840
1310721 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-0960 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 131-1445 [1] CAM-TORQUE  
3. 7E-9759 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400144
 

151-0960: GOVERNOR GP-UNIT INJECTOR

151-0960 GOVERNOR GP-UNIT INJECTOR
S/N 4TF29290-UP
PART OF 131-0721 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00965441 SEBP2840
1510960 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7322 [1] HOUSING AS  
2. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
3. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
4. 7E-3216 [1] BLOCK AS-BEARING  
4A. 6F-5933 [2] BEARING AS-NEEDLE  
5. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
6. 7C-8854 [1] PIN-CLEVIS  
7. 8T-1460 [1] RING-RETAINING  
8. 7C-4483 [1] SCREEN AS (OIL INLET)  
9. 7C-5541 [2] PLATE  
10. 131-3984 M [1] BOLT  
11. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
12. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 123-6433 [1] ARBOR AS-TORQUE CAM  
15. 108-1612 [1] CLEVIS  
16. 4W-6630 [1] LEVER  
17. 4P-4000 [1] SPRING-LEVER  
18. 128-4794 [1] PLUG  
19. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
20. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
21. 8T-7060 [1] RING-RETAINING  
22. 125-8158 [1] SLEEVE-RACK CONTROL  
23. 5C-2874 M [2] NUT (M5X0.8-THD)  
24. 115-2553 [1] VALVE-GOVERNOR SERVO  
25. 4P-5743 [1] LEVER AS-LIMIT  
26. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
27. 5P-9757 [1] SEAL-O-RING  
28. 6D-9953 [1] PIN-SPRING  
29. 108-1613 [1] PISTON-SERVO  
30. 8C-3312 [1] RING-RETAINING  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 7W-8993 [2] WEIGHT  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7W-5591 [1] SEAT-GOVERNOR SPRING  
39. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7C-3776 [1] PISTON AS  
45A. 4N-6407 [1] SPOOL-DASHPOT  
45B. 4N-6406 [1] RING-SPACER  
45C. 4N-6404 [1] RING-RETAINING  
46. 4P-8948 [1] SEAT AS-SPRING  
47. 7W-1440 B [8] SHIM (0.12-MM THK)  
48. 7C-2743 [2] RACE  
49. 7W-5561 [1] BEARING-THRUST  
50. 115-1192 [1] SEAL-GOVERNOR HOUSING  
51. 8C-5061 [1] RING-RETAINING  
52. 7C-5150 [1] PIN  
53. 7C-5480 [1] SPRING-TORSION  
54. 7C-8640 [1] SPRING-CAM  
55. 7W-5594 [1] SHAFT AS-PIVOT  
55A. 8C-5899 [1] PIN-SPRING  
56. 7E-3217 [1] LEVER AS  
57. 3P-3547 [1] RING-RETAINING  
58. 114-1803 [1] LEVER AS  
59. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
60. 7N-2171 [1] RING-RETAINING  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 4P-3539 [1] LEVER-THROTTLE  
63. 4P-3537 [1] RING-TOLERANCE  
64. 4W-6010 [1] CLAMP  
65. 6V-5683 M [1] BOLT (M6X1X16-MM)  
66. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
67. 5C-8312 M [1] NUT (M4X0.7-THD)  
68. 5M-2057 [1] SEAL-O-RING  
69. 9Y-1837 [1] SPRING  
70. 6V-8189 [1] NUT (5/16-18-THD)  
71. 2S-4078 [1] SEAL-O-RING  
72. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400145
 

117-4404: LINES GP-FUEL

117-4404 LINES GP-FUEL
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 121-5662, 121-5663, 121-5664, 121-5665, 125-8063, 146-0676, 202-5308, 202-5309, 202-5310, 202-5311, 202-5312 CHASSIS AR
i00471961 SEBP2840
1174404 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
2. 7Y-8167 [1] GROMMET (50-MM ID)  
3. 093-2063 [1] GROMMET  
4. 095-1386 [7] CLAMP-HOSE  
5. 9M-8406 [2] CLIP (LOOP)  
6. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
8. 8T-4191 M [6] BOLT (M10X1.5X16-MM)  
9. 127-2308 Y [1] SEPARATOR GP-WATER  
10. 5K-8451 [5] CLIP  
11. 6V-9027 [2] SEAL-O-RING  
12. 1J-9671 [2] SEAL-O-RING  
13. 8T-9357 [2] ADAPTER  
14. 3E-4091 [2] ELBOW  
15. 096-0061 [2] STRAP-CABLE  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 5P-1420 E HOSE (25CM)  
18. 5P-1442 E HOSE (285CM)  
19. 5P-1442 E HOSE (470CM)  
20. 5P-1442 E HOSE (420CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400146
 

137-2296: LINES GP-FUEL

137-2296 LINES GP-FUEL
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 120-4958, 187-4222 COOLING AR
AN ATTACHMENT
i00638366 SEBP2840
1372296 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-0604 [1] SUPPORT AS  
2. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP28400147
 

129-1671: LINES GP-FUEL FILTER

129-1671 LINES GP-FUEL FILTER
S/N 4TF29290-UP
PART OF 120-7719, 186-5801 ENGINE AR
ALSO AN ATTACHMENT
i00522894 SEBP2840
1291671 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
2. 129-2145 [1] TUBE AS  
3. 129-1102 Y [1] BASE GP-FUEL FILTER  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [13] SEAL-O-RING  
6. 129-1672 [1] BRACKET  
7. 6V-8397 [8] SEAL-O-RING  
8. 7X-2459 [2] ADAPTER-TEE  
9. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
10. 9S-4191 [3] PLUG (9/16-18-THD)  
11. 5F-7054 [1] SEAL-O-RING  
12. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
13. 4P-9696 [1] TUBE AS  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 8T-0151 [1] ADAPTER  
16. 5P-1046 [1] CONNECTOR  
17. 3N-3252 [1] SPRING  
18. 1P-1670 [1] PLUG-SEAL  
19. 5P-7813 [1] SEAL-O-RING  
20. 6V-9850 [1] ELBOW  
21. 129-2146 [1] TUBE AS  
22. 129-2147 [1] TUBE AS  
23. 5M-5689 [2] CLAMP  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
26. 8T-4971 M [1] BOLT (M6X1X30-MM)  
27. 9S-1350 [1] CLIP  
28. 9W-4216 [1] SPACER (9X18X7-MM THK)  
29. 6V-8636 [2] CONNECTOR  
30. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
31. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
34. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
35. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
36. 141-8275 [2] VALVE-DRAIN (FUEL)  
37. 5P-4961 [2] CLAMP-HOSE  
38. 103-2529 E HOSE (195CM)  
39. 096-0061 [1] STRAP-CABLE  
40. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400148
 

159-9904: LINES GP-FUEL FILTER

159-9904 LINES GP-FUEL FILTER
S/N 4TF29290-UP
PART OF 136-9002 ENGINE AR
AN ATTACHMENT
i01108560 SEBP2840
1599904 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
2. 129-2145 [1] TUBE AS  
3. 145-3175 Y [1] BASE GP-FUEL FILTER (COLD WEATHER, B1-FAMILY)  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [13] SEAL-O-RING  
6. 129-1672 [1] BRACKET  
7. 6V-8397 [8] SEAL-O-RING  
8. 7X-2459 [2] ADAPTER-TEE  
9. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
10. 9S-4191 [3] PLUG (9/16-18-THD)  
11. 5F-7054 [1] SEAL-O-RING  
12. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
13. 4P-9696 [1] TUBE AS  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 8T-0151 [1] ADAPTER  
16. 5P-1046 [1] CONNECTOR  
17. 3N-3252 [1] SPRING  
18. 1P-1670 [1] PLUG-SEAL  
19. 5P-7813 [1] SEAL-O-RING  
20. 6V-9850 [1] ELBOW  
21. 129-2146 [1] TUBE AS  
22. 129-2147 [1] TUBE AS  
23. 5M-5689 [2] CLAMP  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
26. 8T-4971 M [1] BOLT (M6X1X30-MM)  
27. 9S-1350 [1] CLIP  
28. 9W-4216 [1] SPACER (9X18X7-MM THK)  
29. 6V-8636 [2] CONNECTOR  
30. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
31. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
34. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
35. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
36. 8T-0788 [2] ELBOW  
37. 5P-4961 [2] CLAMP-HOSE  
38. 103-2529 E HOSE (175 CM)  
39. 096-0061 [1] STRAP-CABLE  
40. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
41. 8C-6869 [2] CONNECTOR  
42. 129-1090 [2] VALVE-DRAIN  
43. 003-7764 [2] END-HOSE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28400149
 

4P-9693: LINES GP-FUEL RATIO CONTROL

4P-9693 LINES GP-FUEL RATIO CONTROL
S/N 4TF29290-UP
PART OF 120-7719, 136-9002, 186-5801 ENGINE AR
ALSO AN ATTACHMENT
i00373468 SEBP2840
4P9693 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [1] CONNECTOR  
2. 6V-8723 [1] ELBOW  
3. 4P-9694 [1] TUBE AS  
4. 3K-0360 [1] SEAL-O-RING  
5. 4J-5477 [1] SEAL-O-RING  
6. 3J-7354 [1] SEAL-O-RING  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8397 [1] SEAL-O-RING  
9. 8M-2772 [1] CLIP (LOOP)  
 

Information:

Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
320B, 322B and 325B Excavators
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Australia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-CFEL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-CSARL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Americas
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Brazil
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Incorrect Troubleshooting Results In Replacement Of Governor Actuators Which Are Functioning Correctly
Incorrect Troubleshooting Results In Replacement Of Governor Actuators Which Are Functioning Correctly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Asia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Correction to Systems Operation, Testing and Adjusting , "Calibrate Governor Actuator" {1716}
2000/09/04

Caterpillar Parts SIS Catalog 320B :

144-3464 GOVERNOR GP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
119-0632 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
319-4243 CABLE GP-GOVERNOR CONTROL
BASE GP-FUEL FILTER
145-3175 BASE GP-FUEL FILTER
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-0721 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-0721 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
151-0960 GOVERNOR GP-UNIT INJECTOR
LINES GP-FUEL
117-4404 LINES GP-FUEL
LINES GP-FUEL
137-2296 LINES GP-FUEL
LINES GP-FUEL FILTER
129-1671 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
159-9904 LINES GP-FUEL FILTER

Truck sale:

Caterpillar 320B
 
Caterpillar 320B
- Crawler excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar G320B/D, ag - greifer, Bau-Und Bergbauausrüstung
17.353 
Caterpillar G320B/D, ag - greifer, Bau-Und Bergbauausrüstung
- grapple
ZEPPELIN BAUMASCHINEN
Caterpillar 320 BUCKET, schaufel, Bau-Und Bergbauausrüstung
6.000 
Caterpillar 320 BUCKET, schaufel, Bau-Und Bergbauausrüstung
- bucket
MILTON CAT
 
19.220 
Caterpillar G320B/D, ag - greifer, Bau-Und Bergbauausrüstung


 
 
Caterpillar 320B, Raupenbagger, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.