ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP28400270
142-1353: WIRING GP-HEATER
142-1353 WIRING GP-HEATER
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 136-8999, 159-1072 HEATER GP-JACKET WATER
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 136-8999, 159-1072 HEATER GP-JACKET WATER
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-1281 | [1] | PANEL GP-FUSE | |
| 2. | 144-2689 | [1] | HARNESS AS | |
| 3. | 147-2243 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 4. | 111-4871 | [1] | RELAY (24-VOLT) | |
| 5. | 8J-1256 | [1] | CLIP | |
| 6. | 116-0118 | [1] | CLIP | |
| 7. | 8T-4171 M | [3] | BOLT (M6X1X12-MM) | |
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 9. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 10. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| 12. | 7K-1181 | [15] | STRAP-CABLE | |
| 13. | 147-2244 | [1] | WIRE AS | |
| 14. | 6V-5210 M | [1] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 15. | 8T-6412 M | [3] | SCREW-MACHINE (M6X1X20-MM) | |
| 16. | 5M-6668 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 17. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 18. | 3E-7294 | [1] | CIRCUIT BREAKER AS (105-AMPERE) | |
| 19. | 7N-0719 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 20. | 150-5026 | [1] | WIRE AS | |
| 21. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET) | |
| 22. | 150-5027 | [1] | WIRE AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28400271
147-1520: WIRING GP-HYDRAULIC GENERATOR
147-1520 WIRING GP-HYDRAULIC GENERATOR
S/N 9WS1-UP; 6LW1-UP
PART OF 148-1326 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
S/N 9WS1-UP; 6LW1-UP
PART OF 148-1326 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-6308 | [1] | FILM-IDENTIFICATION (MAGNET) | |
| 2. | 9D-3127 | [1] | BASE AS-INDICATOR LIGHT | |
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 3. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE)(MAGNET) | |
| 4. | 9D-9161 | [1] | LENS-GREEN | |
| 5. | 147-3202 | [1] | HARNESS AS | |
| 6. | 3S-2093 B | [22] | STRAP-CABLE | |
| 7. | 147-1532 | [1] | SWITCH AS-ROCKER (MAGNET) | |
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 116-0174 | [4] | TERMINAL | ||
| 8. | 147-4411 | [1] | HARNESS AS | |
| 9. | 147-5052 | [1] | HARNESS AS | |
| 10. | 6K-0806 B | [9] | STRAP-CABLE | |
| 11. | 178-5369 | [1] | HARNESS AS | |
| 12. | 111-4871 | [1] | RELAY (24-VOLT) | |
| 13. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 14. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 15. | 147-5321 | [1] | HARNESS AS-SOLENOID | |
| 16. | 149-0020 | [1] | FILM-INSTRUCTION (GRAPPLE, MAGNET) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP28400272
148-6273: WIRING GP-HYDRAULIC GENERATOR
148-6273 WIRING GP-HYDRAULIC GENERATOR
S/N 9WS1-UP; 6LW1-UP
PART OF 148-1326 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
S/N 9WS1-UP; 6LW1-UP
PART OF 148-1326 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 147-1532 | [1] | SWITCH AS-ROCKER | |
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 116-0174 | [4] | TERMINAL | ||
| 2. | 147-4411 | [1] | HARNESS AS | |
| 3. | 3S-2093 | [30] | STRAP-CABLE | |
| 4. | 148-9279 | [1] | HARNESS AS | |
| 5. | 6K-0806 | [7] | STRAP-CABLE | |
| 6. | 156-0841 | [1] | HARNESS AS | |
| 7. | 111-4871 | [1] | RELAY (24-VOLT) | |
| 8. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 9. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 10. | 147-5321 | [1] | HARNESS AS-SOLENOID | |
| 11. | 151-6308 | [1] | FILM-IDENTIFICATION (MAGNET) | |
| 12. | 9D-3127 | [1] | BASE AS-INDICATOR LIGHT | |
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 13. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 14. | 9D-9161 | [1] | LENS-GREEN | |
| 15. | 147-3202 | [1] | HARNESS AS | |
| 16. | 149-1074 | [1] | PLATE | |
| 17. | 149-0020 | [1] | FILM-INSTRUCTION (GRAPPLE, MAGNET) | |
| M | METRIC PART | |||
#SEBP28400273
143-5234: WIRING GP-QUICK COUPLER
143-5234 WIRING GP-QUICK COUPLER
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP
PART OF 142-9898 CONTROL AR-COUPLER
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP
PART OF 142-9898 CONTROL AR-COUPLER
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-3427 | [1] | HARNESS AS | |
| 2. | 143-3426 | [1] | HARNESS AS | |
| 3. | 137-4703 | [1] | PLATE AS | |
| 4. | 129-3181 M | [2] | BOLT-SOCKET HEAD (M10X1.5X55-MM) | |
| 5. | 113-4683 | [1] | ALARM AS | |
| 6. | 8T-0325 M | [1] | BOLT (M5X0.8X14-MM) | |
| 7. | 110-7883 | [1] | SWITCH GP-START | |
| 8. | 5P-8500 | [1] | KEY | |
| 9. | 3S-2093 | [10] | STRAP-CABLE | |
| 10. | 122-8526 | [1] | FILM-INSTRUCTION (COUPLER WEDGE) | |
| 11. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 137-4704 | [1] | PLATE | |
| 13. | 7Y-7388 M | [2] | SCREW-BUTTON HEAD (M5X0.8X12-MM) | |
| M | METRIC PART | |||
#SEBP28400274
153-6197: WIRING GP-QUICK COUPLER
153-6197 WIRING GP-QUICK COUPLER
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 3YZ1-UP
PART OF 153-6198 CONTROL AR-COUPLER
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 3YZ1-UP
PART OF 153-6198 CONTROL AR-COUPLER
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-2715 | [1] | SWITCH AS-ROTARY (QUICK COUPLER) | |
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE & WEDGE.) | ||||
| 2. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 3. | 113-4683 | [1] | ALARM AS | |
| 4. | 155-4572 | [1] | HARNESS AS-WIRING (QUICK COUPLER ALARM) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE & WEDGE.) | ||||
| 5. | 3S-2093 | [2] | STRAP-CABLE | |
| 6. | 6V-2313 M | [1] | BOLT (M5X0.8X30-MM) | |
| 7. | 6V-8369 | [1] | NUT (7/16-28-THD) | |
| 8. | 2H-3920 | [1] | LOCKWASHER | |
| 9. | 158-4212 | [1] | FILM-INSTRUCTION (QUICK COUPLER) | |
| 10. | 153-4800 | [1] | COVER AS | |
| 6I-5368 | [1] | RUBBER-CUSHION | ||
| 11. | 134-0394 | [1] | KNOB-CONTROL | |
| M | METRIC PART | |||
#SEBP28400275
214-8902: WIRING GP-QUICK COUPLER
214-8902 WIRING GP-QUICK COUPLER
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 3YZ1-UP
PART OF 153-6198 CONTROL AR-COUPLER
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 3YZ1-UP
PART OF 153-6198 CONTROL AR-COUPLER
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [20] | STRAP-CABLE | |
| 2. | 7X-2619 M | [5] | BOLT (M6X1X10-MM) | |
| 3. | 3E-3363 | [1] | RECEPTACLE AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 5. | 206-1340 | [1] | BRACKET AS | |
| 6. | 161-3128 | [4] | RELAY (24-VOLT) | |
| 7. | 155-2715 | [1] | SWITCH AS-ROTARY (QUICK COUPLER) | |
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 6V-8369 | [1] | NUT (7/16-28-THD) | |
| 9. | 2H-3920 | [1] | LOCKWASHER | |
| 10. | 158-4212 | [1] | FILM-INSTRUCTION (QUICK COUPLER) | |
| 11. | 153-4800 | [1] | COVER AS | |
| 6I-5368 | [1] | RUBBER-CUSHION | ||
| 12. | 113-4683 | [1] | ALARM AS | |
| 13. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 14. | 6V-2313 M | [1] | BOLT (M5X0.8X30-MM) | |
| 15. | 155-4572 | [1] | HARNESS AS-WIRING (QUICK COUPLER ALARM) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 205-6202 | [1] | HARNESS AS | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 17. | 111-4871 | [1] | RELAY (24-VOLT) | |
| M | METRIC PART | |||
#SEBP28400276
128-8875: WIRING GP-REFUELING PUMP
128-8875 WIRING GP-REFUELING PUMP
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
REFUELING PUMP
PART OF 117-4164 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
REFUELING PUMP
PART OF 117-4164 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-1827 | [1] | WIRE AS | |
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 4. | 116-0097 | [1] | SWITCH AS (REFUELING PUMP STOP) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 5. | 116-0095 | [1] | SWITCH AS (REFUELING PUMP START) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 6. | 111-4836 | [3] | CLIP | |
| 7. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 116-0118 | [1] | CLIP | |
| 10. | 149-5050 | [2] | RELAY (24-VOLT) | |
| 11. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 12. | 167-3496 | [1] | HARNESS AS-FUEL TANK | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| M | METRIC PART | |||
#SEBP28400277
150-1441: WIRING GP-RELAY PANEL
150-1441 WIRING GP-RELAY PANEL
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
WINDOW WARMER
PART OF 136-8996, 159-1071 COLD WEATHER AR
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
WINDOW WARMER
PART OF 136-8996, 159-1071 COLD WEATHER AR
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 150-1443 | [1] | WIRE AS | |
| 2. | 150-1442 | [1] | HARNESS AS | |
| 3. | 150-1444 | [1] | WIRE AS | |
| 4. | 150-1445 | [1] | WIRE AS | |
| 5. | 165-4026 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(WINDOW WARMER RELAY) | |
| 6V-8186 | [2] | NUT-FULL (5/16-24-THD) | ||
| 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | ||
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 6. | 8T-6411 M | [2] | SCREW-MACHINE (M6X1X12-MM) | |
| 7. | 8D-7265 | [1] | CIRCUIT BREAKER AS (40-AMPERE)(WINDOW WARMER) | |
| 8. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 9. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 10. | 5M-6668 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 11. | 3S-2093 | [5] | STRAP-CABLE | |
| M | METRIC PART | |||
#SEBP28400278
150-1432: WIRING GP-WINDOW DEFROSTER
150-1432 WIRING GP-WINDOW DEFROSTER
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 136-8996, 159-1071 COLD WEATHER AR
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 136-8996, 159-1071 COLD WEATHER AR
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS#SEBP28400279
134-2744: WIRING GP-WORK TOOL
134-2744 WIRING GP-WORK TOOL
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 3YZ1-UP
PART OF 134-1061 CONTROL AR-AUXILIARY, 171-1365 CONVERSION AR-WORK TOOL
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 3YZ1-UP
PART OF 134-1061 CONTROL AR-AUXILIARY, 171-1365 CONVERSION AR-WORK TOOL
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [23] | STRAP-CABLE | |
| 2. | 153-7794 | [1] | HARNESS AS | |
| 3. | 116-0118 | [3] | CLIP | |
| 4. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 5. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 111-4836 | [4] | CLIP | |
| 7. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 8. | 153-1149 | [1] | HARNESS AS | |
| 9. | 111-4787 | [1] | SWITCH AS-ROCKER (HYDRAULIC FLOW MODE) | |
| 116-0174 | [4] | TERMINAL | ||
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 10. | 145-7213 | [1] | HARNESS AS | |
| 11. | 4D-1836 | [1] | SWITCH-TOGGLE (AUX. HYD. BACK-UP) | |
| 12. | 143-3421 | [1] | INDICATOR | |
| 13. | 170-8976 | [1] | FILM-INSTRUCTION | |
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Asia
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Testing and Adjusting
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Does Not Work - Troubleshoot - 420E And 2303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Electrical Components And Connector Locations
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Connector Contact Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Harness and Wire Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Troubleshooting
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Ground Cables In The Battery And Wiring Circuit Now Have Full Contact To Ground {7050,1408,7253}
1998/08/24
1998/08/24
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
1999/06/28
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}


