AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

193-8375 WIRING GP-CAB S/N 4NZ2500-3399; 5FZ5200-6699; 6BZ609-699 PART OF 142-8702, 177-9563 CHASSIS AR 216


ELECTRICAL AND STARTING SYSTEM
WIRING GP
SWITCH GP
WIRING GP
LIGHTING GP
WIRING GP

SKID STEER LOADER 216 SKID STEER LOADER 4NZ
 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine SEBP2849 216 4NZ   (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
SWITCH GP-PRESS & TEMP
247-0323 SWITCH GP-PRESS & TEMP
WIRING GP-CAB
142-9398 WIRING GP-CAB
WIRING GP-CAB
193-8375 WIRING GP-CAB
WIRING GP-ELECTRONIC CONTROL
142-9107 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
142-9107 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
142-9396 WIRING GP-ENGINE
 

#SEBP28490200
 

193-8375: WIRING GP-CAB

193-8375 WIRING GP-CAB
S/N 4NZ2500-3399; 5FZ5200-6699; 6BZ609-699
PART OF 142-8702, 177-9563 CHASSIS AR
i01434263 SEBP2849
1938375 WIRING GP-CAB Parts scheme 1938375 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
3. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
4. 7G-1060 [1] STRAP AS-GROUND  
5. 8T-8737 [13] PLUG-SEAL  
6. 8T-9655 [6] MOUNT-ISOLATION  
7. 9R-7941 [1] SOCKET AS  
8. 113-8490 [1] FUSE (10-AMPERE)(GAGE PANEL)  
8A. 113-8490 [1] FUSE (10-AMPERE)(INTERLOCK)  
8B. 113-8490 [1] FUSE (10-AMPERE)(COLD START)  
8C. 113-8490 [1] FUSE (10-AMPERE)(AUXILIARY HYDRAULIC)  
8D. 113-8490 [1] FUSE (10-AMPERE)(KEY START SWITCH)  
8E. 113-8490 [1] FUSE (10-AMPERE)(SPARE)  
8F. 113-8490 [1] FUSE (10-AMPERE)(RH TAIL LAMP)  
8G. 113-8490 [1] FUSE (10-AMPERE)(LH TAIL LAMP)  
8H. 113-8490 [1] FUSE (10-AMPERE)(FUEL SHUTOFF)  
9. 113-8491 [1] FUSE (15-AMPERE)(REAR WORKING LAMP)  
9A. 113-8491 [1] FUSE (15-AMPERE)(WIPER LEVER)  
10. 128-4249 [1] LOCKWASHER  
11. 143-1974 [4] RECEPTACLE  
12. 146-4323 [1] RELAY AS (12-VOLT)(PARKING BRAKE)  
13. 154-4233 Y [1] CONTROL GP-INTERLOCK  
14. 188-0131 [1] BRACKET AS  
15. 190-8002 [1] HARNESS AS-CAB (INTERLOCK)  
  116-4159 [1] BASE  
  125-2122 [1] CONNECTOR  
  112-9609 [1] BLOCK-MICRORELAY  
  124-9636 [1] BLOCK-MINIFUSE  
  112-9610 [1] LOCK-MICRORELAY  
  124-9637 [1] LOCK-MINIFUSE  
  111-6816 [1] LOCK  
  8T-8737 [24] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7T-0094 [6] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [115] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [11] STRAP-CABLE (WHITE)  
  112-9611 [8] TERMINAL-BLADE (18-GA TO 20-GA)  
  112-9612 [12] TERMINAL-BLADE  
  116-4160 [3] TERMINAL-BLADE (12-GA TO 14-GA)  
  116-4161 [14] TERMINAL-BLADE (16-GA TO 18-GA)  
  3E-9179 [4] TERMINAL-RECEPTACLE (14-GA TO 18-GA)  
  111-6792 [3] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
16. 193-8374 Y [1] COVER GP-FUSE PANEL  
17. 211-0052 [1] NUT (1-11/16-18-THD)  
18. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
19. 195-0936 M [8] INSERT-THREADED (M6X1-THD)  
20. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
21. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
22. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
23. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
24. 4P-7581 [1] CLIP (LADDER)  
25. 4P-8134 [2] CLIP (LADDER)  
26. 5C-7261 M [3] NUT (M8X1.25-THD)  
27. 5C-8312 M [2] NUT (M4X0.7-THD)  
28. 5C-9553 M [6] BOLT (M6X1X16-MM)  
29. 7G-7053 [1] GROMMET  
30. 7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
31. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [1] NUT (M10X1.5-THD)  
33. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 9X-1046 M [2] SCREW (M4X0.7X18-MM)  
35. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
36. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
37. 9X-2092 E TRIM-EDGE (21-CM)  
38. 146-4323 [1] RELAY AS (12-VOLT)(ARMREST INDICATOR)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28490201
 

142-9107: WIRING GP-ELECTRONIC CONTROL

142-9107 WIRING GP-ELECTRONIC CONTROL
S/N 4NZ1-269; 5FZ1-432; 6BZ1-608
PART OF 142-8707, 142-8710, 142-9255 HYDRAULIC AR
ALSO AN ATTACHMENT
i01064899 SEBP2849
1429107 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
2. 8T-9655 [6] MOUNT-ISOLATION  
3. 113-8490 [1] FUSE (10-AMPERE)  
4. 142-9105 [1] HARNESS AS  
  144-1636 [11] PIN-CONNECTOR (14-GA TO 18-GA)  
  150-6765 [1] PLUG AS-CONNECTOR (26-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  126-1766 [37] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  125-7874 [1] TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  155-2258 [1] WEDGE-PLUG LOCK (12-PIN)  
5. Y [1] CONTROL GP-UNPROGRAMMED (AUXILIARY HYDRAULIC)  
6. 167-7801 [1] RESISTOR AS (390-OHM, 2-WATT)  
7. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
8. 8T-4197 M [3] BOLT (M8X1.25X40-MM)  
  7K-1181 BF [2] STRAP-CABLE  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28490202
 

142-9107: WIRING GP-ELECTRONIC CONTROL

142-9107 WIRING GP-ELECTRONIC CONTROL
S/N 4NZ270-2499; 5FZ433-5199; 6BZ1-608
PART OF 142-8707, 142-8710, 142-9255 HYDRAULIC AR
ALSO AN ATTACHMENT
i01518515 SEBP2849
1429107 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
2. 8T-9655 [6] MOUNT-ISOLATION  
3. 113-8490 [1] FUSE (10-AMPERE)  
4. 142-9105 [1] HARNESS AS  
  144-1636 [11] PIN-CONNECTOR (14-GA TO 18-GA)  
  150-6765 [1] PLUG AS-CONNECTOR (26-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  126-1766 [37] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  125-7874 [1] TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  155-2258 [1] WEDGE-PLUG LOCK (12-PIN)  
5. 167-7801 [1] RESISTOR AS (390-OHM, 2-WATT)  
6. 178-2254 CY [1] ELECTRONICS GP-IMPLEMENT (AUXILIARY HYDRAULIC)  
7. 4P-8134 [1] CLIP (LADDER)  
8. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
9. 8T-4197 M [3] BOLT (M8X1.25X40-MM)  
  7K-1181 BF [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28490203
 

142-9396: WIRING GP-ENGINE

142-9396 WIRING GP-ENGINE
S/N 4NZ1-2499; 5FZ1-5199; 6BZ1-608
PART OF 142-8702, 177-9563 CHASSIS AR
i01047732 SEBP2849
1429396 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-1060 [1] STRAP AS-GROUND  
2. 115-1615 [2] RELAY AS (12-VOLT)  
3. 142-7517 [1] CABLE AS-GROUND  
4. 142-9112 [1] HARNESS AS-POWER  
  8T-8799 [3] BOOT (RED)  
  107-3134 [1] HOUSING-CONNECTOR  
  144-1636 [10] PIN-CONNECTOR (14-GA TO 18-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [2] PLUG-SEAL  
  107-3136 [3] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  126-1766 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  305-5362 [2] TERMINAL AS (18-GA)  
  3S-2093 [9] STRAP-CABLE  
  1P-0810 [1] TAPE-ELECTRICAL  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  9G-4336 [1] TERMINAL-RING (4-GA, 3/8-IN SCREW)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  128-4190 [2] TERMINAL AS  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  9X-1055 [2] TERMINAL-RECEPTACLE (12-GA)  
  9X-1056 [2] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  127-7874 E SHEET AS (10-CM)  
5. 115-3073 [1] CLIP AS-CONNECTING  
6. 4P-7581 [1] CLIP (LADDER)  
7. 5C-9553 M [2] BOLT (M6X1X16-MM)  
8. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4133 M [1] NUT (M10X1.5-THD)  
11. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 4P-8134 [2] CLIP (LADDER)  
13. 142-8833 [2] SPACER (11X14.3X9-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 3S-2093 B [6] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28490204
 

197-6900: WIRING GP-ENGINE

197-6900 WIRING GP-ENGINE
S/N 4NZ2500-3399; 5FZ5200-6699; 6BZ609-699
PART OF 142-8702, 177-9563 CHASSIS AR
i01440195 SEBP2849
1976900 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-8134 [2] CLIP (LADDER)  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 142-7513 [1] CABLE AS-BATTERY (POSITIVE)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  159-8049 E CABLE (00-GA, RED)(30-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
4. 142-7517 [1] CABLE AS-GROUND  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  159-8050 E CABLE (00-GA, BLACK)(48-CM)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  8S-3020 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
5. 197-6901 [1] HARNESS AS-ENGINE  
  8T-8799 [3] BOOT (RED)  
  107-3134 [1] HOUSING-CONNECTOR (ALTERNATOR)  
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  9X-3401 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  305-5362 [2] TERMINAL AS (18-GA)  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  9G-4336 [1] TERMINAL-RING (4-GA, 3/8-IN SCREW)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  128-4190 [2] TERMINAL AS  
  6H-3586 [1] TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)(ALTERNATOR)  
6. 115-3073 [1] CLIP AS-CONNECTING  
7. 3S-2093 B [5] STRAP-CABLE  
8. 4P-7581 [1] CLIP (LADDER)  
9. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28490205
 

142-9397: WIRING GP-MACHINE

142-9397 WIRING GP-MACHINE
S/N 4NZ1-2499; 5FZ1-5199; 6BZ1-608
PART OF 142-8702, 177-9563 CHASSIS AR
i01047763 SEBP2849
1429397 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 6K-0806 [12] STRAP-CABLE  
3. 7K-1181 [3] STRAP-CABLE  
4. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
5. 8M-4963 [1] STRAP AS-GROUND  
6. 115-1615 [1] RELAY AS (12-VOLT)  
7. 118-6365 [1] PLATE AS  
8. 142-7513 [1] CABLE AS-BATTERY (POSITIVE)  
9. 142-8640 [1] HARNESS AS-REAR LIGHTING (DOOR)  
  144-1636 [6] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  126-1766 [10] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
10. 142-8645 [1] HARNESS AS-PLATFORM  
  173-0702 [1] BOOT  
  159-9853 [1] GROMMET  
  159-5749 Y [1] CONTROL GP-HANDLE  
  158-3770 [1] KIT-PILOT VALVE (LEVER)  
    (INLCUDES NUT, LEVER & PIN SPRING)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9G-3695 [4] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  164-6378 [1] VALVE GP-PILOT  
11. 142-9120 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
12. 150-8538 [1] WIRE AS  
13. 150-8539 [1] WIRE AS  
14. 168-7908 Y [1] SWITCH GP-MAGNETIC (12-VOLT)(MAIN POWER RELAY)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  1H-3244 [2] LOCKWASHER  
16. 155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
17. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18. 102-8802 B [3] KIT-RECEPTACLE (2-PIN)  
19. 102-8804 B [3] KIT-RECEPTACLE (4-PIN)  
20. 102-8805 B [2] KIT-RECEPTACLE (6-PIN)  
21. 102-8806 B [1] KIT-RECEPTACLE (8-PIN)  
22. 102-8801 B [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
23. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 5C-9553 M [6] BOLT (M6X1X16-MM)  
26. 5L-4507 [2] SCREW-MACHINE (10-32X0.875-IN)  
27. 8C-8558 [4] SCREW-LOCK (4-40X0.25-IN)  
28. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4133 M [2] NUT (M10X1.5-THD)  
30. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
31. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
33. 9H-1958 [1] CIRCUIT BREAKER GP (20-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
34. 9X-1046 M [3] SCREW (M4X0.7X18-MM)  
35. 9G-3695 B [65] PLUG-SEAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28490206
 

202-2169: WIRING GP-MACHINE

202-2169 WIRING GP-MACHINE
S/N 4NZ2500-3399; 5FZ5200-6699; 6BZ609-699
PART OF 142-8702, 177-9563 CHASSIS AR
i01495047 SEBP2849
2022169 WIRING GP-MACHINE Parts scheme 2022169 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
3. 7D-5473 [2] BOLT-SOCKET HEAD (8-32X0.75-IN)  
4. 7K-1181 [16] STRAP-CABLE  
5. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
6. 8M-4963 [1] STRAP AS-GROUND  
7. 8T-8737 B [32] PLUG-SEAL  
8. 8T-9655 [6] MOUNT-ISOLATION  
9. 115-1615 [3] RELAY AS (12-VOLT)(MAIN POWER)  
10. 128-4249 [2] LOCKWASHER  
11. 142-7513 [1] CABLE AS-BATTERY (POSITIVE)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  159-8049 E CABLE (00-GA, RED)(30-CM)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
12. 142-8640 [1] HARNESS AS-REAR LIGHTING (DOOR)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
13. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(LIGHTING)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 150-8538 [1] WIRE AS  
15. 167-7801 [1] RESISTOR AS (390-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-5677 D WIRE (18-GA, BLACK)(0.1-M)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
16. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
17. 178-2254 Y [1] ELECTRONICS GP-IMPLEMENT (AUXILIARY HYDRAULIC)(AUXILIARY)  
18. 180-9214 [2] NUT (1-11/16-18-THD)  
19. 190-8009 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK, RH)  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
20. 193-8378 [1] BRACKET AS  
21. 197-6897 [1] WIRE AS  
22. 202-0329 [1] HARNESS AS-PLATFORM  
  9X-3401 [52] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [52] PIN-CONNECTOR (14-GA TO 16-GA)  
  126-1767 [52] PIN-CONNECTOR (14-GA TO 16-GA)  
  7T-0093 [6] PIN-CONNECTOR (12-GA TO 14-GA)  
  8T-8737 [26] PLUG-SEAL  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  9X-3402 [99] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [100] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  7T-0094 [2] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8L-8413 [50] STRAP-CABLE (WHITE)  
  1P-0810 BD [1] TAPE-ELECTRICAL  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  128-4190 [1] TERMINAL AS  
  6H-3586 [1] TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8079 [3] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  9X-1055 [10] TERMINAL-RECEPTACLE (12-GA)  
  9X-1056 [2] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  100-5041 [12] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(90-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)  
  9X-1054 [6] PLUG AS-CONNECTOR (4-PIN)  
  150-6765 [1] PLUG AS-CONNECTOR (26-PIN)  
  159-9322 [1] SEAL-O-RING  
  167-3692 [1] RECEPTACLE AS-CONNECTOR (31-PIN)  
  197-7259 [1] RECEPTACLE AS-CONNECTOR (19-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  177-9648 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
23. 202-0602 [1] PLATE  
24. 102-8802 B [3] KIT-RECEPTACLE (2-PIN)  
25. 102-8804 B [3] KIT-RECEPTACLE (4-PIN)  
26. 102-8805 B [1] KIT-RECEPTACLE (6-PIN)  
27. 102-8806 B [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
28. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
30. 4P-8134 [3] CLIP (LADDER)  
31. 5C-9553 M [9] BOLT (M6X1X16-MM)  
32. 5L-4507 [2] SCREW-MACHINE (10-32X0.875-IN)  
33. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
34. [4] STRIP  
35. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [3] NUT (M10X1.5-THD)  
37. 8T-4197 M [3] BOLT (M8X1.25X40-MM)  
38. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
39. 8T-4205 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
40. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
41. 115-1615 [1] RELAY AS (12-VOLT)(COLD START)  
42. 115-1615 [1] RELAY AS (12-VOLT)(START)  
43. 115-1615 [1] RELAY AS (12-VOLT)(FUEL SOLENOID)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28490207
 

192-2694: WIRING GP-REAR LIGHTING

192-2694 WIRING GP-REAR LIGHTING
S/N 4NZ2500-3399; 5FZ5200-6699
PART OF 175-4241 CONVERSION AR-ROADING
AN ATTACHMENT
i01516270 SEBP2849
1922694 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 115-1615 [1] RELAY AS (12-VOLT)(STOP LIGHT)  
3. 166-2033 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  7X-2444 [1] TEE-SWIVEL  
4. 180-3008 [1] HARNESS AS-REAR  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS , WEDGE & INTERFACE SEAL)
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (20-CM)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
5. 184-1564 Y [2] SWITCH GP-PRESSURE (STOP LIGHT)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP28490208
 

159-5784: WIRING GP-WORK TOOL

159-5784 WIRING GP-WORK TOOL
S/N 4NZ1-2499; 5FZ1-5199; 6BZ1-608
PART OF 142-9013 CONTROL GP-PILOT OPERATED HYD
ALSO AN ATTACHMENT
i01065220 SEBP2849
1595784 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3542 [1] DIODE GP  
2. 113-8491 [2] FUSE (15-AMPERE)  
3. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
4. 142-9184 [1] BRACKET  
5. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
6. 146-4323 [2] RELAY AS (12-VOLT)  
7. 159-9495 [1] NUT (1-1/2-18-THD)  
8. 159-9496 [1] LOCKWASHER  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
11. 3S-2093 B [4] STRAP-CABLE  
12. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
14. 9G-3695 [3] PLUG-SEAL  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28490209
 

187-1258: WIRING GP-WORK TOOL

187-1258 WIRING GP-WORK TOOL
S/N 4NZ1-3399; 5FZ1-6699
AN ATTACHMENT
i01409850 SEBP2849
1871258 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 216 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 8T-8737 [3] PLUG-SEAL  
3. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 105-3542 [1] DIODE GP (RECEPTACLE)  
5. 110-8760 [1] STRAP  
6. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
7. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
8. 142-9184 [1] BRACKET  
9. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
10. 146-4323 [2] RELAY AS (12-VOLT)(WORK TOOL)  
11. 159-9495 [1] NUT (1-1/2-18-THD)  
12. 159-9496 [1] LOCKWASHER  
13. 193-8339 [1] PLATE  
14. 204-1396 Y [1] CONTROL GP-HANDLE (LH)  
15. 5C-7261 M [2] NUT (M8X1.25-THD)  
16. 8T-0255 [1] PIN-SPRING  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
19. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3034 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 216 :

WIRING GP-CAB
142-9398 WIRING GP-CAB
WARNING GP-BACKUP
142-8656 WARNING GP-BACKUP
WARNING GP-BACKUP
142-8656 WARNING GP-BACKUP
SWITCH GP-TEMPERATURE
164-8388 SWITCH GP-TEMPERATURE
SWITCH GP-PRESSURE
184-1564 SWITCH GP-PRESSURE
SWITCH GP-PRESSURE
171-4613 SWITCH GP-PRESSURE
SWITCH GP-PRESSURE
153-0690 SWITCH GP-PRESSURE
SWITCH GP-PRESS & TEMP
247-0323 SWITCH GP-PRESS & TEMP
WIRING GP-ELECTRONIC CONTROL
142-9107 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
142-9107 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
142-9396 WIRING GP-ENGINE
WIRING GP-ENGINE
197-6900 WIRING GP-ENGINE
WIRING GP-MACHINE
142-9397 WIRING GP-MACHINE
WIRING GP-MACHINE
202-2169 WIRING GP-MACHINE
WIRING GP-REAR LIGHTING
192-2694 WIRING GP-REAR LIGHTING
WIRING GP-WORK TOOL
159-5784 WIRING GP-WORK TOOL

Truck sale:

Caterpillar 216, Skid Steer Loaders, Construction
19,500 
Caterpillar 216, Skid Steer Loaders, Construction
- Skid Steer Loaders
N C MACHINERY CO.
Caterpillar LIFT TRUCKS EJC 216, Misc Forklifts, Material handling equipment
5,000 
Caterpillar LIFT TRUCKS EJC 216, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
 
14.179 
Caterpillar 216, Kompaktlader, Bau-Und Bergbauausrüstung


Caterpillar 216.TO.299, schaufel, Bau-Und Bergbauausrüstung
 
Caterpillar 216.TO.299, schaufel, Bau-Und Bergbauausrüstung
- bucket
HASTINGS DEERING (AUSTRALIA)
Australia
 
 
Caterpillar 216, Construction
- Skid Steer Loaders
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.