AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

172-3700 WIRING GP-AIR CONDITIONER S/N 6TL410-UP PART OF 133-8054 LINES GP-AIR CONDITIONER AN ATTACHMENT M312


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR M312 EXCAVATOR 6TL
 M312 Excavator 6TL00410-UP (MACHINE) POWERED BY 3054 Engine SEBP2851 M312 6TL   (1988)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
156-5503 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
172-3700 WIRING GP-AIR CONDITIONER
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-CONSOLE
117-7959 WIRING GP-CONSOLE
 

#SEBP28510210
 

172-3700: WIRING GP-AIR CONDITIONER

172-3700 WIRING GP-AIR CONDITIONER
S/N 6TL410-UP
PART OF 133-8054 LINES GP-AIR CONDITIONER
AN ATTACHMENT
i01160006 SEBP2851
1723700 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
2. 8T-8737 [1] PLUG-SEAL  
3. 155-2261 [1] WEDGE-PLUG LOCK (2-PIN)  
4. 172-3701 [1] HARNESS AS-HEATER & AIR COND  
5. 175-3348 [1] PLUG AS-CONNECTOR  
  096-0061 B [4] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP28510211
 

133-6422: WIRING GP-CAB RISER

133-6422 WIRING GP-CAB RISER
S/N 6TL410-950
PART OF 134-3727 RISER AR-CAB
AN ATTACHMENT
i00799144 SEBP2851
1336422 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3355 [1] RECEPTACLE AS-CONNECTOR  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 128-1423 E SEAL (5CM)  
4. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
5. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 8T-8737 [1] PLUG-SEAL  
7. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
8. 116-7317 [1] PLATE  
10. 133-6424 [1] HARNESS AS-CAB  
11. 133-6425 [1] HARNESS AS-CAB  
12. 134-2213 [1] BRACKET  
13. 134-2822 [1] HARNESS AS-CAB  
14. 152-1691 [1] HARNESS AS  
15. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3K-8107 [1] GROMMET  
17. 5C-7261 M [1] NUT (M8X1.25-THD)  
18. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
19. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
21. 8D-9947 [2] CLIP  
22. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
23. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
24. 096-0061 B [20] STRAP-CABLE  
25. 144-0195 E HOSE (445CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28510212
 

111-1865: WIRING GP-CHASSIS

111-1865 WIRING GP-CHASSIS
S/N 6TL410-UP
UNDERCARRIAGE FRONT
PART OF 123-9722 FRAME AR-UNDERCARRIAGE
i00476600 SEBP2851
1111865 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-2973 [1] HARNESS AS  
2. 9X-6772 [5] STRAP-CABLE  
 

#SEBP28510213
 

117-7959: WIRING GP-CONSOLE

117-7959 WIRING GP-CONSOLE
S/N 6TL410-950
PART OF 123-9714 OPERATOR AR
i00638347 SEBP2851
1177959 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
2. 8T-0328 C [3] WASHER-HARD (5.5X10X1-MM THK)  
3. 8U-1110 [2] CONNECTOR  
4. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
5. 116-7317 [1] PLATE  
6. 117-3187 [1] SWITCH AS (START, PILOT)  
7. 120-6920 [1] HARNESS AS  
8. 126-0928 [1] HARNESS AS  
9. 139-2350 C [1] STRAP-CABLE  
10. 139-2351 C [3] STRAP-CABLE  
11. 144-0629 C [1] PLATE  
12. 144-0630 C [1] PLATE  
13. 125-6083 [1] SCREW-PAN HEAD  
14. 130-8268 [2] SCREW-PAN HEAD  
15. 142-8545 CM [1] BOLT (M16X2X20-MM)  
16. 3H-2900 [1] GROMMET  
17. 5C-2874 CM [3] NUT (M5X0.8-THD)  
18. 6V-7743 CM [2] LOCKNUT (M6X1-THD)  
19. 8T-4138 CM [2] BOLT (M6X1X20-MM)  
20. 9X-8244 CM [1] LOCKNUT (M16X2-THD)  
21. 9X-8256 C [2] WASHER (6.6X12X2-MM THK)  
22. 5W-1992 C [4] TERMINAL  
23. 128-1423 CE [2] SEAL (19CM EACH)  
24. 128-1423 CE SEAL (5CM)  
25. 9X-6772 B [5] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28510214
 

159-0012: WIRING GP-CONSOLE

159-0012 WIRING GP-CONSOLE
S/N 6TL410-UP
OFFSET BOOM, MEDIUM PRESSURE FUNCTION
PART OF 159-0009 VALVE & LINES AR-AUXILIARY
AN ATTACHMENT
i00815359 SEBP2851
1590012 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3353 [3] RECEPTACLE AS  
2. 3E-3377 [3] WEDGE-RECEPTACLE LOCK (4-PIN)  
3. 8T-8729 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 120-5969 [2] DIODE AS  
5. 123-8634 [2] BLOCK-LOCK  
6. 152-1621 [1] HARNESS AS-CONSOLE  
7. 096-0061 B [10] STRAP-CABLE  
  147-7817 F [1] FILM-IDENTIFICATION (AUX HYD FUNCTION)  
    (LOCATED IN JUNCTION BOX)
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP28510215
 

179-9036: WIRING GP-ELECTRONIC CONTROL

179-9036 WIRING GP-ELECTRONIC CONTROL
S/N 6TL951-UP
PART OF 123-9714 OPERATOR AR
i01212957 SEBP2851
1799036 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 [14] SLEEVE  
2. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 117-3188 [1] COVER  
5. 117-3190 [1] CONNECTOR (4-PIN)  
6. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
7. 122-4695 [1] BRACKET  
8. 124-0329 [2] RESISTOR  
9. 136-9421 [1] SWITCH GP-LIMIT (OSCILLATING-AXLE)  
10. 145-9205 [1] PLATE AS  
11. 146-0678 [1] ROD  
12. 150-4461 [1] PLATE AS  
13. 150-4462 [1] CONTROL AS-ELECTRONIC  
14. 150-4464 [1] WIRE AS  
15. 150-9277 [1] PLATE  
16. 151-1032 [1] MOTOR AS-GOVERNOR  
17. 151-1954 [3] MOUNT AS  
18. 155-7862 [1] BALL JOINT AS  
19. 155-7863 [1] BALL JOINT AS  
20. 166-3896 [1] LEVER AS  
21. 166-3897 [1] PLATE AS  
22. 203-7559 [1] SPRING  
23. 175-3349 [1] RECEPTACLE AS  
24. 179-9042 [1] HARNESS AS  
25. 179-9044 [1] HARNESS AS  
26. 179-9048 [1] HARNESS AS  
27. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
28. 139-6903 M [1] NUT (M6X1-THD)  
29. 166-5812 M [1] LOCKNUT  
30. 3C-6969 M [4] NUT (M3X0.5-THD)  
31. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
32. 5A-3604 M [2] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
33. 5C-2890 M [1] NUT (M6X1-THD)  
34. 5C-9553 M [2] BOLT (M6X1X16-MM)  
35. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
36. 7X-2535 M [1] BOLT (M6X1X60-MM)  
37. 8T-0087 [2] LOCKWASHER  
38. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4171 M [3] BOLT (M6X1X12-MM)  
40. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4971 M [3] BOLT (M6X1X30-MM)  
42. 9X-6032 M [1] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
43. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
   
  6V-9829 BF [2] CAP (ORFS)  
  6V-8397 BF [2] SEAL-O-RING  
  096-0061 BF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP28510216
 

123-9715: WIRING GP-MACHINE

123-9715 WIRING GP-MACHINE
S/N 6TL410-539; 6TL542-589; 6TL591-634
PART OF 123-9714 OPERATOR AR
i00643426 SEBP2851
1239715 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14 CM)  
2. 117-3188 [1] COVER  
3. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
4. 120-6922 [1] HARNESS AS (CONSOLE)  
5. 120-6923 [1] HARNESS AS  
6. 122-4695 [1] BRACKET  
7. 124-0329 [2] RESISTOR  
8. 147-8477 C [1] CONTROL AS-ENGINE & HYD PUMP  
9. 164-7250 [1] BRACKET AS  
10. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL TRAVEL)  
11. 144-7391 C [1] HARNESS AS  
12. 139-5317 [1] PLATE  
13. 143-9581 C [1] CONTROL AS-ELECTRONIC  
14. 139-8284 [1] WIRE AS  
15. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 7X-2535 M [1] BOLT (M6X1X60-MM)  
19. 8T-3844 M [4] BOLT (M6X1X70-MM)  
20. 8T-4171 M [3] BOLT (M6X1X12-MM)  
21. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
22. 117-3190 [1] CONNECTOR (4-PIN)  
  096-0061 BF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP28510217
 

150-7059: WIRING GP-MACHINE

150-7059 WIRING GP-MACHINE
S/N 6TL540-541; 6TL590-590; 6TL635-950
PART OF 123-9714 OPERATOR AR
i00798534 SEBP2851
1507059 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  9X-1386 E SLEEVE (14CM)  
2. 175-3349 [1] RECEPTACLE AS  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 5C-9553 M [2] BOLT (M6X1X16-MM)  
5. 8T-4171 M [3] BOLT (M6X1X12-MM)  
6. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 117-3188 [1] COVER  
8. 117-3190 [1] CONNECTOR (4-PIN)  
9. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
10. 122-4695 [1] BRACKET  
11. 124-0329 [2] RESISTOR  
12. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL LOCK)  
  8U-2381 [3] WASHER (13X19X1.5-MM THK)  
13. 145-9205 [1] PLATE AS  
14. 146-0678 [1] ROD  
15. 166-3897 [1] PLATE AS  
16. 166-3896 [1] LEVER AS  
17. 150-4461 [1] PLATE AS  
18. 150-4462 [1] CONTROL AS-ELECTRONIC  
  143-4781 [1] BRACKET AS  
  5W-1453 [2] LOCKWASHER  
  099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
19. 150-4463 [1] HARNESS AS  
20. 150-4464 [1] WIRE AS  
21. 150-4465 [1] HARNESS AS  
22. 150-9277 [1] PLATE  
23. 150-9354 [1] HARNESS AS  
24. 151-1032 [1] MOTOR AS-GOVERNOR  
25. 151-1954 [3] MOUNT AS  
26. 166-3899 [1] SPRING  
27. 155-7862 [1] BALL JOINT AS  
28. 155-7863 [1] BALL JOINT AS  
29. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
30. 166-5812 M [1] LOCKNUT  
31. 139-6903 M [1] NUT (M6X1-THD)  
32. 3C-6969 M [4] NUT (M3X0.5-THD)  
33. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
34. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
35. 8T-4971 M [3] BOLT (M6X1X30-MM)  
36. 7X-2535 M [1] BOLT (M6X1X60-MM)  
37. 8T-0087 [2] LOCKWASHER  
38. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
39. 5C-2890 M [1] NUT (M6X1-THD)  
40. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
41. 5A-3604 M [2] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
42. 9X-6032 M [1] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
43. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
44. 096-0061 B [15] STRAP-CABLE  
45. 6V-8397 [2] SEAL-O-RING  
46. 6V-9829 [2] CAP (ORFS)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28510218
 

123-9719: WIRING GP-PLATFORM

123-9719 WIRING GP-PLATFORM
S/N 6TL410-950
PART OF 117-7954 CHASSIS AR
i00516071 SEBP2851
1239719 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3357 [1] RECEPTACLE AS  
2. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
3. 5W-6315 [1] FITTING  
4. 164-8366 [1] COVER  
5. 5W-9376 [1] SWITCH AS (AIR HORN)  
6. 8U-2598 Y [1] WASHER GP-WINDOW  
7. 8U-6109 [1] SWITCH-BRAKE  
8. 8X-9618 [1] STRAP AS-GROUND  
9. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 140-9123 C [1] HARNESS AS-PLATFORM  
11. 099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
12. 2W-9513 M [2] BOLT (M6X1X10-MM)  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 5C-8917 CM [2] SCREW (M6X8-MM)  
15. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 5P-8131 [1] GROMMET  
17. 6P-4467 [1] GROMMET  
18. 5P-0715 DC HOSE (2.6M)  
19. 139-2350 C [6] STRAP-CABLE  
21. 3F-9556 [2] LOCKWASHER  
  096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28510219
 

179-9030: WIRING GP-PLATFORM

179-9030 WIRING GP-PLATFORM
S/N 6TL410-UP
PART OF 134-3727, 194-9220 RISER AR-CAB
AN ATTACHMENT
i01295832 SEBP2851
1799030 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M312 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
3. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 8T-8737 [1] PLUG-SEAL  
5. 116-7317 [1] PLATE  
6. 133-6424 [1] HARNESS AS-CAB  
7. 134-2213 [1] BRACKET  
8. 134-2822 [1] HARNESS AS-CAB  
9. 148-6339 [1] HARNESS AS  
10. 175-3355 [1] RECEPTACLE AS-CONNECTOR  
11. 179-9074 [1] HARNESS AS  
12. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
13. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
15. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
16. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
18. 8D-9947 [2] CLIP  
19. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
20. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
21. 096-0061 B [20] STRAP-CABLE  
22. 144-0195 E HOSE (445CM)  
23. 128-1423 E SEAL (5CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog M312 :

WIRING GP-AIR CONDITIONER
156-5503 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WARNING GP-OVERLOAD
150-7288 WARNING GP-OVERLOAD
SWITCH GP-WIPER
137-7245 SWITCH GP-WIPER
SWITCH GP-WINDOW
122-5777 SWITCH GP-WINDOW
SWITCH GP-SWIVEL
8U-5842 SWITCH GP-SWIVEL
SWITCH GP-SWIVEL
121-2974 SWITCH GP-SWIVEL
SWITCH GP-RESISTOR
141-6258 SWITCH GP-RESISTOR
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-CONSOLE
117-7959 WIRING GP-CONSOLE
WIRING GP-CONSOLE
159-0012 WIRING GP-CONSOLE
WIRING GP-ELECTRONIC CONTROL
179-9036 WIRING GP-ELECTRONIC CONTROL
WIRING GP-MACHINE
123-9715 WIRING GP-MACHINE
WIRING GP-MACHINE
150-7059 WIRING GP-MACHINE
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM

Truck sale:

Caterpillar M312, Construction
24,412 
Caterpillar M312, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
 
$24,298 USD 
CATERPILLAR M312 1999
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
 
$15,899 USD 
CATERPILLAR M312 2002
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
1999 CAT M312
USD $24,599 
1999 CAT M312

Budrolpol
2001 CAT M312
USD $46,900 
2001 CAT M312

MB Tractor & Equipment
Tilton, New Hampshire
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.