POWER TRAIN
AXLE GPPOWER TRAIN
AXLE GP
#SEBP28510230
123-9727: AXLE & TRANSMISSION AR
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS#SEBP28510231
131-2904: AXLE & TRANSMISSION AR
131-2904 AXLE & TRANSMISSION AR
S/N 6TL410-1139
PART OF 148-9918 AXLE & MTG AR-REAR
AN ATTACHMENT
S/N 6TL410-1139
PART OF 148-9918 AXLE & MTG AR-REAR
AN ATTACHMENT
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS#SEBP28510232
175-6556: AXLE & TRANSMISSION AR
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS#SEBP28510233
175-6557: AXLE & TRANSMISSION AR
175-6557 AXLE & TRANSMISSION AR
S/N 6TL1140-UP
PART OF 148-9918 AXLE & MTG AR-REAR
AN ATTACHMENT
S/N 6TL1140-UP
PART OF 148-9918 AXLE & MTG AR-REAR
AN ATTACHMENT
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS#SEBP28510234
124-2921: AXLE AR-FRONT
124-2921 AXLE AR-FRONT
S/N 6TL410-1841; 6TL1849-1849
AXLE & DISC BRAKES
PART OF 124-2920 AXLE & MTG AR-FRONT
S/N 6TL410-1841; 6TL1849-1849
AXLE & DISC BRAKES
PART OF 124-2920 AXLE & MTG AR-FRONT
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-3688 | [1] | GEAR AS-PINION | |
| 2. | 9R-6814 B | [1] | WASHER (88X104.6X1.5-MM THK) | |
| 9R-6805 B | [1] | WASHER (88X104.6X0.9-MM THK) | ||
| 9R-6806 B | [1] | WASHER (88X104.6X0.95-MM THK) | ||
| 9R-6807 B | [1] | WASHER (88X104.6X1-MM THK) | ||
| 9R-6808 B | [1] | WASHER (88X104.6X1.05-MM THK) | ||
| 9R-6809 B | [1] | WASHER (88X104.6X1.1-MM THK) | ||
| 9R-6810 B | [1] | WASHER (88X104.6X1.15-MM THK) | ||
| 9R-6811 B | [1] | WASHER (88X104.6X1.2-MM THK) | ||
| 9R-6812 B | [1] | WASHER (88X104.6X1.25-MM THK) | ||
| 9R-6813 B | [1] | WASHER (88X104.6X1.3-MM THK) | ||
| 9R-6801 B | [1] | WASHER (88X104.6X0.7-MM THK) | ||
| 9R-6802 B | [1] | WASHER (88X104.6X0.75-MM THK) | ||
| 9R-6803 B | [1] | WASHER (88X104.6X0.8-MM THK) | ||
| 9R-6804 B | [1] | WASHER (88X104.6X0.85-MM THK) | ||
| 3. | 203-0214 | [1] | SEAL-O-RING | |
| 4. | 220-2593 | [2] | BUSHING-SLEEVE | |
| 5. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 6. | 128-7901 | [1] | ELBOW AS | |
| 7. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [2] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8146 B | [2] | WASHER (18.5X35X11-MM THK) | ||
| 202-8147 B | [2] | WASHER (18.5X35X12-MM THK) | ||
| 202-8148 B | [2] | WASHER (18.5X35X13-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 8. | 204-7841 | [2] | RING | |
| 9. | 121-7687 | [2] | SEAL-O-RING | |
| 10. | 8U-3473 | [1] | SEAL-O-RING | |
| 11. | 8U-5818 | [1] | FITTING | |
| 12. | 5W-5632 | [4] | BOLT (M14X2X100-MM) | |
| 13. | 5W-6442 | [1] | HOUSING | |
| 14. | 5W-5547 B | [1] | DISC (1-MM THK) | |
| 5W-5548 B | [1] | DISC (1.1-MM THK) | ||
| 5W-5549 B | [1] | DISC (1.2-MM THK) | ||
| 5W-5550 B | [1] | DISC (1.3-MM THK) | ||
| 5W-5551 B | [1] | DISC (1.4-MM THK) | ||
| 5W-5552 B | [1] | DISC (1.5-MM THK) | ||
| 5W-5553 B | [1] | DISC (1.6-MM THK) | ||
| 5W-5554 B | [1] | DISC (1.7-MM THK) | ||
| 5W-6400 B | [1] | DISC (1.8-MM THK) | ||
| 5W-5555 B | [1] | DISC (1.05-MM THK) | ||
| 5W-5556 B | [1] | DISC (1.15-MM THK) | ||
| 5W-5561 B | [1] | DISC (1.65-MM THK) | ||
| 8U-2752 B | [1] | DISC (0.7-MM THK) | ||
| 8U-2753 B | [1] | DISC (0.8-MM THK) | ||
| 8U-2754 B | [1] | DISC (0.9-MM THK) | ||
| 15. | 5W-6391 | [2] | SCRAPER | |
| 16. | 7T-9342 | [1] | CONE-BEARING | |
| 17. | 9R-6932 B | [1] | RING (11.3-MM THK) | |
| 9R-6933 B | [1] | RING (11.33-MM THK) | ||
| 9R-6934 B | [1] | RING (11.36-MM THK) | ||
| 9R-6935 B | [1] | RING (11.39-MM THK) | ||
| 9R-6936 B | [1] | RING (11.42-MM THK) | ||
| 9R-6937 B | [1] | RING (11.45-MM THK) | ||
| 9R-6938 B | [1] | RING (11.48-MM THK) | ||
| 9R-6939 B | [1] | RING (11.51-MM THK) | ||
| 9R-6940 B | [1] | RING (11.54-MM THK) | ||
| 9R-6941 B | [1] | RING (11.57-MM THK) | ||
| 9R-6942 B | [1] | RING (11.6-MM THK) | ||
| 9R-6943 B | [1] | RING (11.63-MM THK) | ||
| 9R-6944 B | [1] | RING (11.66-MM THK) | ||
| 9R-6945 B | [1] | RING (11.69-MM THK) | ||
| 9R-6836 B | [1] | RING (11.72-MM THK) | ||
| 9R-6837 B | [1] | RING (11.75-MM THK) | ||
| 9R-6838 B | [1] | RING (11.78-MM THK) | ||
| 9R-6839 B | [1] | RING (11.81-MM THK) | ||
| 9R-6840 B | [1] | RING (11.84-MM THK) | ||
| 9R-6841 B | [1] | RING (11.87-MM THK) | ||
| 9R-6842 B | [1] | RING (11.9-MM THK) | ||
| 9R-6843 B | [1] | RING (11.93-MM THK) | ||
| 9R-6844 B | [1] | RING (11.96-MM THK) | ||
| 9R-6845 B | [1] | RING (11.99-MM THK) | ||
| 9R-6846 B | [1] | RING (12.02-MM THK) | ||
| 9R-6847 B | [1] | RING (12.05-MM THK) | ||
| 9R-6848 B | [1] | RING (12.08-MM THK) | ||
| 9R-6849 B | [1] | RING (12.11-MM THK) | ||
| 9R-6850 B | [1] | RING (12.14-MM THK) | ||
| 9R-6924 B | [1] | RING (12.17-MM THK) | ||
| 9R-6925 B | [1] | RING (12.2-MM THK) | ||
| 9R-6926 B | [1] | RING (12.23-MM THK) | ||
| 9R-6927 B | [1] | RING (12.26-MM THK) | ||
| 9R-6928 B | [1] | RING (12.29-MM THK) | ||
| 9R-6929 B | [1] | RING (12.32-MM THK) | ||
| 9R-6930 B | [1] | RING (12.35-MM THK) | ||
| 9R-6931 B | [1] | RING (12.38-MM THK) | ||
| 8U-5669 B | [1] | SPACER (11.27-MM THK) | ||
| 8U-5670 B | [1] | SPACER (11.24-MM THK) | ||
| 8U-5671 B | [1] | SPACER (11.21-MM THK) | ||
| 8U-5672 B | [1] | SPACER (11.18-MM THK) | ||
| 8U-5673 B | [1] | SPACER (11.15-MM THK) | ||
| 128-7637 B | [1] | RING (11.12-MM THK) | ||
| 128-7638 B | [1] | RING (11.09-MM THK) | ||
| 128-7639 B | [1] | RING (11.06-MM THK) | ||
| 128-7640 B | [1] | RING (11.03-MM THK) | ||
| 128-7641 B | [1] | RING (11-MM THK) | ||
| 128-7642 B | [1] | RING (10.97-MM THK) | ||
| 128-7643 B | [1] | RING (10.94-MM THK) | ||
| 18. | 5W-5646 | [1] | SEAL | |
| 19. | 203-0215 | [3] | SEAL-O-RING | |
| 20. | 9R-6819 | [12] | WASHER (13X21.9X3-MM THK) | |
| 21. | 216-0590 | [1] | ROD AS | |
| 22. | 5W-6076 | [1] | BOLT | |
| 23. | 5W-5630 | [1] | PLUG | |
| 24. | 6V-5225 | [4] | SCREW-DRIVE | |
| 25. | 5W-5531 | [16] | WASHER (19X30X3-MM THK) | |
| 26. | 5W-6392 | [2] | SEAL-O-RING | |
| 27. | 5W-5483 | [2] | RING | |
| 28. | 5W-5485 | [1] | SEAL-O-RING | |
| 29. | 5W-6643 | [1] | GUIDE | |
| 30. | 5W-4819 | [2] | SEAL-O-RING | |
| 31. | 5W-5696 | [1] | CYLINDER (STEERING) | |
| 32. | 6T-6408 | [2] | SEAL-O-RING | |
| 33. | 9W-4926 | [2] | PLUG | |
| 34. | 9X-0642 | [20] | NUT | |
| 35. | 5W-5694 | [20] | RING | |
| 36. | 9X-0641 | [20] | WASHER | |
| 37. | 054-7758 | [20] | STUD | |
| 38. | 5W-2177 M | [4] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 39. | 121-7626 | [2] | PLUG | |
| 40. | 054-6552 B | [2] | SHIM (1.5-MM THK) | |
| 054-6553 B | [2] | SHIM (2-MM THK) | ||
| 054-6554 B | [2] | SHIM (2.5-MM THK) | ||
| 054-6555 B | [2] | SHIM (3-MM THK) | ||
| 054-6556 B | [2] | SHIM (1.7-MM THK) | ||
| 054-6557 B | [2] | SHIM (2.2-MM THK) | ||
| 8U-2751 B | [2] | WASHER-THRUST | ||
| 41. | 8T-2355 | [8] | RING-RETAINING | |
| 42. | 9R-6949 | [16] | RING | |
| 43. | 121-7627 | [8] | BEARING-ROLLER | |
| 44. | 9R-6950 | [8] | PINION-PLANETARY | |
| 45. | 121-7628 | [2] | HOUSING-DRIVE | |
| 46. | 5W-6370 | [2] | RING-RETAINING | |
| 47. | 9R-6958 | [2] | RING-RETAINING | |
| 48. | 219-4548 | [2] | GEAR-CARRIER (35-TEETH) | |
| 49. | 219-4549 | [2] | GEAR-SUN | |
| 50. | 8U-0746 | [2] | WASHER-THRUST | |
| 51. | 121-7631 | [2] | RING-RETAINING | |
| 52. | 132-3693 | [2] | WASHER | |
| 53. | 121-7632 | [8] | DISC-FRICTION | |
| 54. | 121-7635 B | [10] | DISC-GEAR (2-MM THK) | |
| 121-7634 B | [10] | DISC-GEAR (2.5-MM THK) | ||
| 121-7633 B | [10] | DISC-GEAR (3-MM THK) | ||
| 55. | 8U-3591 | [12] | SPACER (6.5X15X7-MM THK) | |
| 56. | 121-7636 M | [12] | BOLT (M6X1X40-MM) | |
| 57. | 8U-3594 | [12] | NUT | |
| 58. | 8U-3592 | [12] | SPRING | |
| 59. | 9R-7002 | [1] | BEARING-TAPERED ROLLER | |
| 60. | 9R-6997 | [1] | SEAL | |
| 61. | 5W-5666 | [1] | FLANGE | |
| 62. | 9R-6954 | [1] | PLATE-COVER | |
| 63. | 9R-6985 | [1] | WASHER (27.1X50X5-MM THK) | |
| 64. | 5W-5352 M | [1] | NUT (M27X1.5-THD) | |
| 65. | 5W-5398 | [1] | WASHER-RETAINING | |
| 66. | 5W-5669 | [1] | HOUSING | |
| 67. | 5W-6884 | [2] | GEAR | |
| 68. | 6T-5749 | [2] | WASHER-THRUST | |
| 69. | 5W-5671 | [4] | GEAR-PINION | |
| 70. | 6T-5751 | [4] | WASHER-THRUST | |
| 71. | 6T-5748 | [2] | SHAFT-DIFFERENTIAL | |
| 72. | 8T-2323 M | [12] | BOLT-SOCKET HEAD (M12X1.5X120-MM) | |
| 73. | 121-7676 | [2] | SHAFT-AXLE | |
| 74. | 8T-2450 | [4] | PIN-SPRING | |
| 75. | 9R-6962 | [4] | PIN-CLAMPING | |
| 76. | 121-7681 | [1] | HOUSING-AXLE | |
| 77. | 121-7682 | [1] | HOUSING-AXLE | |
| 78. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 79. | 8U-5698 | [2] | PLATE-WASHER | |
| 80. | 121-7637 | [2] | RING-BACKUP | |
| 81. | 121-7638 | [2] | RING | |
| 82. | 121-7639 | [4] | RING | |
| 83. | 121-7640 | [2] | PISTON-BRAKE | |
| 84. | 223-7967 | [2] | GEAR | |
| 85. | 5W-7320 | [2] | RING | |
| 87. | 5W-5480 | [4] | SEAL-O-RING | |
| 88. | 5W-6845 | [2] | SEAL-O-RING | |
| 89. | 8U-5722 | [2] | FLANGE | |
| 90. | 2S-0479 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 91. | 8U-0747 B | [2] | SPACER (109.7X120.3X15.2-MM THK) | |
| 8U-0748 B | [2] | SPACER (109.7X120.3X15-MM THK) | ||
| 8U-0749 B | [2] | SPACER (109.7X120.3X14.8-MM THK) | ||
| 8U-0750 B | [2] | SPACER (109.7X120.3X14.6-MM THK) | ||
| 8U-0751 B | [2] | SPACER (109.7X120.3X14.4-MM THK) | ||
| 8U-0752 B | [2] | SPACER (109.7X120.3X14.2-MM THK) | ||
| 8U-0753 B | [2] | SPACER (109.7X120.3X14-MM THK) | ||
| 121-7642 B | [2] | SPACER (109.7X120.3X14.42-MM THK) | ||
| 121-7643 B | [2] | SPACER (109.7X120.3X14.45-MM THK) | ||
| 121-7644 B | [2] | SPACER (109.7X120.3X14.48-MM THK) | ||
| 121-7645 B | [2] | SPACER (109.7X120.3X14.51-MM THK) | ||
| 121-7646 B | [2] | SPACER (109.7X120.3X14.54-MM THK) | ||
| 92. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 93. | 6R-5257 | [2] | SEAL AS | |
| 94. | 5W-7640 | [2] | SCREW | |
| 95. | 121-7656 | [2] | FITTING | |
| 96. | 7X-5804 | [2] | SEAL-O-RING | |
| 97. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 98. | 121-7657 Y | [2] | UNIVERSAL JOINT GP | |
| 99. | 128-7867 | [4] | FITTING-HYDRAULIC | |
| 100. | 8T-4779 M | [16] | BOLT (M16X2X35-MM) | |
| 101. | 110-0860 | [4] | PIN-BEARING | |
| 102. | 121-7659 B | [2] | SHIM (0.6-MM THK) | |
| 121-7661 B | [2] | SHIM (0.8-MM THK) | ||
| 121-7662 B | [2] | SHIM (1-MM THK) | ||
| 121-7663 B | [2] | SHIM (1.2-MM THK) | ||
| 121-7665 B | [2] | SHIM (1.6-MM THK) | ||
| 121-7667 B | [2] | SHIM (2-MM THK) | ||
| 103. | 110-4743 | [4] | SEAL-O-RING | |
| 104. | 110-0858 | [4] | CAP-SEALING | |
| 105. | 4D-8648 | [4] | CUP-BEARING | |
| 106. | 121-7670 | [1] | HOUSING GP-AXLE (RH) | |
| 121-7668 | [1] | NUT | ||
| 107. | 121-7669 | [1] | HOUSING GP-AXLE (LH) | |
| 121-7668 | [1] | NUT | ||
| 108. | 164-2658 | [1] | TIE ROD GP (RH) | |
| 108A. | 5W-5374 | [1] | ROD AS | |
| 108B. | 8U-9402 | [1] | CLAMP | |
| 109. | 164-2657 | [1] | TIE ROD GP (LH) | |
| 109A. | 5W-5374 | [1] | ROD AS | |
| 109B. | 8U-9402 | [1] | CLAMP | |
| 110. | 121-7675 | [4] | BUSHING | |
| 111. | 9R-6996 | [4] | SEAL | |
| 112. | 175-4073 | [2] | BUSHING-SLEEVE | |
| 113. | 9R-6948 | [4] | CLIP | |
| 114. | 9R-7003 | [1] | BEARING-TAPERED ROLLER | |
| 115. | 6Y-2942 | [1] | BEARING-TAPERED ROLLER | |
| 116. | 5W-5475 | [1] | SEAL-O-RING | |
| 117. | 5W-5627 M | [16] | BOLT (M18X2.5X60-MM) | |
| 118. | 178-8608 | [2] | CONE-TAPERED | |
| 119. | 6V-2652 | [4] | CONE-BEARING | |
| 120. | 6Y-2943 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 121. | 7T-9343 | [1] | CUP-BEARING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510235
123-9726: AXLE AR-REAR
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-4433 | [2] | FITTING | |
| 2. | 136-8482 | [2] | ADAPTER | |
| 3. | 123-8324 | [2] | CAP | |
| 4. | Y | [1] | AXLE & TRANSMISSION AR | |
| 5. | 3J-1907 | [2] | SEAL-O-RING | |
| 6. | 6V-7688 M | [8] | LOCKNUT (M20X2.5-THD) | |
| 7. | 7Y-1858 | [16] | WASHER (21X37X3-MM THK) | |
| 8. | 8T-0656 M | [8] | BOLT (M20X2.5X150-MM) | |
| 9. | 8T-7876 | [2] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510236
123-9726: AXLE AR-REAR
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-7688 M | [8] | LOCKNUT (M20X2.5-THD) | |
| 2. | 7Y-1858 | [16] | WASHER (21X37X3-MM THK) | |
| 3. | 123-8324 | [2] | CAP | |
| 4. | 136-8482 | [2] | ADAPTER | |
| 5. | 175-6556 Y | [1] | AXLE & TRANSMISSION AR | |
| 6. | 3J-1907 | [2] | SEAL-O-RING | |
| 7. | 6V-4433 | [2] | FITTING | |
| 8. | 8T-0656 M | [8] | BOLT (M20X2.5X150-MM) | |
| 9. | 8T-7876 | [2] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510237
123-9728: AXLE AR-REAR
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8U-5919 | [1] | HOUSING-AXLE | |
| 2. | 109-4440 | [1] | PLUG | |
| 3. | 110-0847 | [1] | PLUG-SCREW | |
| 4. | 190-8676 | [2] | SEAL-O-RING | |
| 5. | 5W-8311 | [2] | ROD-AXLE | |
| 6. | 9R-3533 M | [13] | BOLT-SPECIAL (M6X1 THD) | |
| 7. | 6T-6408 | [2] | SEAL-O-RING | |
| 8. | 9R-6949 | [16] | RING | |
| 9. | 8T-0349 M | [36] | BOLT (M16X2X65-MM) | |
| 10. | 5W-3061 | [2] | SEAL-O-RING | |
| 11. | 8U-0776 | [2] | RING-SUPPORT | |
| 12. | 9R-6816 | [1] | STUD (M14X2 THD) | |
| 13. | 5W-5682 | [2] | VALVE AS-PURGE | |
| 14. | 8U-5923 | [2] | FITTING AS | |
| 15. | 8U-2233 | [2] | SEAL-O-RING | |
| 16. | 4K-2039 | [2] | SEAL-O-RING | |
| 17. | 6R-5257 | [2] | SEAL AS | |
| 18. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 19. | 9R-7000 M | [1] | NUT (M14X2-THD) | |
| 20. | 8U-0747 B | [2] | SPACER (109.7X120.3X15.2-MM THK) | |
| 8U-0748 B | [2] | SPACER (109.7X120.3X15-MM THK) | ||
| 8U-0749 B | [2] | SPACER (109.7X120.3X14.8-MM THK) | ||
| 8U-0750 B | [2] | SPACER (109.7X120.3X14.6-MM THK) | ||
| 8U-0751 B | [2] | SPACER (109.7X120.3X14.4-MM THK) | ||
| 8U-0752 B | [2] | SPACER (109.7X120.3X14.2-MM THK) | ||
| 8U-0753 B | [2] | SPACER (109.7X120.3X14-MM THK) | ||
| 121-7642 B | [2] | SPACER (109.7X120.3X14.42-MM THK) | ||
| 121-7643 B | [2] | SPACER (109.7X120.3X14.45-MM THK) | ||
| 121-7644 B | [2] | SPACER (109.7X120.3X14.48-MM THK) | ||
| 121-7645 B | [2] | SPACER (109.7X120.3X14.51-MM THK) | ||
| 121-7646 B | [2] | SPACER (109.7X120.3X14.54-MM THK) | ||
| 21. | 223-7894 | [2] | HUB GP-WHEEL | |
| (EACH INCLUDES) | ||||
| 22. | 211-7104 | [1] | NUT (M95X1.5-THD)(M95X1.5-THD) | |
| 23. | 8U-2343 | [4] | PLUG | |
| 24. | 9W-4926 | [2] | PLUG | |
| 25. | 9X-0642 | [20] | NUT | |
| 26. | 5W-5694 | [20] | RING | |
| 27. | 9X-0641 | [20] | WASHER | |
| 28. | 054-7758 | [20] | STUD | |
| 29. | 5W-2177 M | [4] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 30. | 121-7626 | [2] | PLUG | |
| 31. | 203-0215 | [2] | SEAL-O-RING | |
| 32. | 2S-0479 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 8U-5722 | [2] | FLANGE | |
| 34. | 5W-6845 | [2] | SEAL-O-RING | |
| 35. | 121-7627 | [8] | BEARING-ROLLER | |
| 36. | 5W-5480 | [4] | SEAL-O-RING | |
| 37. | 8U-3834 | [2] | SPACER (95.5X105.55X3.8-MM THK) | |
| 38. | 5W-7320 | [2] | RING | |
| 39. | 223-7967 | [2] | GEAR | |
| 40. | 121-7640 | [2] | PISTON-BRAKE | |
| 41. | 121-7639 | [4] | RING | |
| 42. | 121-7638 | [2] | RING | |
| 43. | 121-7637 | [2] | RING-BACKUP | |
| 44. | 8U-5698 | [2] | PLATE-WASHER | |
| 45. | 8U-3592 | [12] | SPRING | |
| 46. | 8U-3594 | [12] | NUT | |
| 47. | 121-7636 M | [12] | BOLT (M6X1X40-MM)(M16X1 THD) | |
| 48. | 8U-3591 | [12] | SPACER (6.5X15X7-MM THK)(6.5X15X7-MM THK) | |
| 49. | 5W-7381 | [2] | SHAFT-SEAL | |
| 50. | 121-7635 B | [10] | DISC-GEAR (2-MM THK) | |
| 121-7634 B | [10] | DISC-GEAR (2.5-MM THK) | ||
| 121-7633 B | [10] | DISC-GEAR (3-MM THK) | ||
| 51. | 054-6552 B | [2] | SHIM (1.5-MM THK) | |
| 054-6553 B | [2] | SHIM (2-MM THK) | ||
| 054-6554 B | [2] | SHIM (2.5-MM THK) | ||
| 054-6555 B | [2] | SHIM (3-MM THK) | ||
| 054-6556 B | [2] | SHIM (1.7-MM THK) | ||
| 054-6557 B | [2] | SHIM (2.2-MM THK) | ||
| 8U-2751 B | [2] | WASHER-THRUST | ||
| 52. | 8T-2355 | [8] | RING-RETAINING | |
| 53. | 121-7632 | [8] | DISC-FRICTION | |
| 54. | 132-3693 | [2] | WASHER (130X182.6X14.5-MM THK) | |
| 55. | 121-7631 | [2] | RING-RETAINING | |
| 56. | 8U-0746 | [2] | WASHER-THRUST | |
| 57. | 129-2712 | [2] | GEAR-SUN | |
| 58. | 8T-9524 | [2] | SEAL-O-RING | |
| 59. | 132-4344 | [2] | CARRIER | |
| 60. | 5W-6370 | [2] | RING-RETAINING | |
| 61. | 121-7628 | [2] | HOUSING-DRIVE | |
| 62. | 9R-6950 | [8] | PINION-PLANETARY | |
| 63. | 178-8608 | [2] | CONE-TAPERED | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP28510238
131-3112: AXLE AR-REAR
131-3112 AXLE AR-REAR
S/N 6TL410-UP
PART OF 131-2904, 175-6557 AXLE & TRANSMISSION AR
AN ATTACHMENT
S/N 6TL410-UP
PART OF 131-2904, 175-6557 AXLE & TRANSMISSION AR
AN ATTACHMENT
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 129-2702 | [1] | HOUSING-AXLE | |
| 2. | 109-4440 | [1] | PLUG | |
| 3. | 110-0847 | [1] | PLUG-SCREW | |
| 4. | 190-8676 | [2] | SEAL-O-RING | |
| 5. | 129-2703 | [2] | SHAFT | |
| 6. | 9R-3533 M | [13] | BOLT-SPECIAL | |
| 7. | 129-2704 | [2] | SLEEVE | |
| 8. | 129-2705 | [2] | RING-RETAINING | |
| 9. | 132-5160 | [2] | GEAR AS | |
| (EACH INCLUDES) | ||||
| 9A. | 9R-6957 | [1] | NUT | |
| 10. | 8T-1447 M | [30] | BOLT-SOCKET HEAD (M16X2X70-MM) | |
| 11. | 8T-2393 M | [6] | BOLT-SOCKET HEAD (M16X2X60-MM) | |
| 12. | 5W-3061 | [2] | SEAL-O-RING | |
| 13. | 8U-0776 | [2] | RING-SUPPORT | |
| 14. | 6R-5257 | [2] | SEAL AS | |
| 15. | 5W-6366 | [4] | BEARING | |
| 16. | 2R-0409 | [36] | WASHER (16.66X24.64X3-MM THK) | |
| 17. | 8U-0747 B | [2] | SPACER (109.7X120.3X15.2-MM THK) | |
| 8U-0748 B | [2] | SPACER (109.7X120.3X15-MM THK) | ||
| 8U-0749 B | [2] | SPACER (109.7X120.3X14.8-MM THK) | ||
| 8U-0750 B | [2] | SPACER (109.7X120.3X14.6-MM THK) | ||
| 8U-0751 B | [2] | SPACER (109.7X120.3X14.4-MM THK) | ||
| 8U-0752 B | [2] | SPACER (109.7X120.3X14.2-MM THK) | ||
| 8U-0753 B | [2] | SPACER (109.7X120.3X14-MM THK) | ||
| 121-7642 B | [2] | SPACER (109.7X120.3X14.42-MM THK) | ||
| 121-7643 B | [2] | SPACER (109.7X120.3X14.45-MM THK) | ||
| 121-7644 B | [2] | SPACER (109.7X120.3X14.48-MM THK) | ||
| 121-7645 B | [2] | SPACER (109.7X120.3X14.51-MM THK) | ||
| 121-7646 B | [2] | SPACER (109.7X120.3X14.54-MM THK) | ||
| 18. | 9R-7000 M | [1] | NUT (M14X2-THD) | |
| 19. | 9R-6816 | [1] | STUD | |
| 20. | 158-6333 Y | [2] | BRAKE GP-DRUM | |
| 21. | 129-2720 | [2] | DRUM-BRAKE | |
| 22. | 9X-0642 | [20] | NUT | |
| 23. | 5W-5694 | [20] | RING | |
| 24. | 9X-0641 | [20] | WASHER | |
| 25. | 129-2718 | [20] | STUD-WHEEL | |
| 26. | 5W-2177 M | [4] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 27. | 3T-8699 | [2] | PLUG | |
| 28. | 6T-6403 | [2] | SEAL-O-RING | |
| 29. | 132-5158 | [2] | FLANGE | |
| 30. | 5W-6845 | [2] | SEAL-O-RING | |
| 31. | 129-2710 | [2] | GEAR-INTERNAL | |
| 32. | 9R-6973 | [2] | PLATE-LOCK | |
| 33. | 129-2711 | [4] | BOLT (M10X1.5X16-MM) | |
| 34. | 129-2712 | [2] | GEAR-SUN | |
| 35. | 129-2713 | [2] | HOUSING-DRIVE | |
| 36. | 9R-6950 | [8] | PINION-PLANETARY | |
| 37. | 121-7627 | [8] | BEARING-ROLLER | |
| 38. | 9R-6949 | [16] | RING | |
| 39. | 8T-2355 | [8] | RING-RETAINING | |
| 40. | 054-6552 B | [2] | SHIM (1.5-MM THK) | |
| 054-6553 B | [2] | SHIM (2-MM THK) | ||
| 054-6554 B | [2] | SHIM (2.5-MM THK) | ||
| 054-6555 B | [2] | SHIM (3-MM THK) | ||
| 129-2714 B | [2] | SHIM (3.5-MM THK) | ||
| 129-2715 B | [2] | SHIM (4-MM) | ||
| 129-2716 B | [2] | SHIM (4.5-MM THK) | ||
| 129-2717 B | [2] | SHIM (5-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510239
233-8730: AXLE GP-STEERING
233-8730 AXLE GP-STEERING
S/N 6TL1842-1843; 6TL1846-1848; 6TL1850-UP
PART OF 124-2920 AXLE & MTG AR-FRONT
S/N 6TL1842-1843; 6TL1846-1848; 6TL1850-UP
PART OF 124-2920 AXLE & MTG AR-FRONT
For full view, you need register
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-8727 | [1] | GEAR AS-PINION | |
| 2. | 9R-6814 B | [1] | WASHER (88X104.6X1.5-MM THK) | |
| 9R-6805 B | [1] | WASHER (88X104.6X0.9-MM THK) | ||
| 9R-6806 B | [1] | WASHER (88X104.6X0.95-MM THK) | ||
| 9R-6807 B | [1] | WASHER (88X104.6X1-MM THK) | ||
| 9R-6808 B | [1] | WASHER (88X104.6X1.05-MM THK) | ||
| 9R-6809 B | [1] | WASHER (88X104.6X1.1-MM THK) | ||
| 9R-6810 B | [1] | WASHER (88X104.6X1.15-MM THK) | ||
| 9R-6811 B | [1] | WASHER (88X104.6X1.2-MM THK) | ||
| 9R-6812 B | [1] | WASHER (88X104.6X1.25-MM THK) | ||
| 9R-6813 B | [1] | WASHER (88X104.6X1.3-MM THK) | ||
| 9R-6801 B | [1] | WASHER (88X104.6X0.7-MM THK) | ||
| 9R-6802 B | [1] | WASHER (88X104.6X0.75-MM THK) | ||
| 9R-6803 B | [1] | WASHER (88X104.6X0.8-MM THK) | ||
| 9R-6804 | [1] | WASHER (88X104.6X0.85-MM THK) | ||
| 16. | 7T-9342 | [1] | CONE-BEARING | |
| 17. | 7T-7343 | [1] | PLATE | |
| 18. | 9R-6932 B | [1] | RING (11.3-MM THK) | |
| 9R-6933 B | [1] | RING (11.33-MM THK) | ||
| 9R-6934 B | [1] | RING (11.36-MM THK) | ||
| 9R-6935 B | [1] | RING (11.39-MM THK) | ||
| 9R-6936 B | [1] | RING (11.42-MM THK) | ||
| 9R-6937 B | [1] | RING (11.45-MM THK) | ||
| 9R-6938 B | [1] | RING (11.48-MM THK) | ||
| 9R-6939 B | [1] | RING (11.51-MM THK) | ||
| 9R-6940 B | [1] | RING (11.54-MM THK) | ||
| 9R-6941 B | [1] | RING (11.57-MM THK) | ||
| 9R-6942 B | [1] | RING (11.6-MM THK) | ||
| 9R-6943 B | [1] | RING (11.63-MM THK) | ||
| 9R-6944 B | [1] | RING (11.66-MM THK) | ||
| 9R-6945 B | [1] | RING (11.69-MM THK) | ||
| 9R-6836 B | [1] | RING (11.72-MM THK) | ||
| 9R-6837 B | [1] | RING (11.75-MM THK) | ||
| 9R-6838 B | [1] | RING (11.78-MM THK) | ||
| 9R-6839 B | [1] | RING (11.81-MM THK) | ||
| 9R-6840 B | [1] | RING (11.84-MM THK) | ||
| 9R-6841 B | [1] | RING (11.87-MM THK) | ||
| 9R-6842 B | [1] | RING (11.9-MM THK) | ||
| 9R-6843 B | [1] | RING (11.93-MM THK) | ||
| 9R-6844 B | [1] | RING (11.96-MM THK) | ||
| 9R-6845 B | [1] | RING (11.99-MM THK) | ||
| 9R-6846 B | [1] | RING (12.02-MM THK) | ||
| 9R-6847 B | [1] | RING (12.05-MM THK) | ||
| 9R-6848 B | [1] | RING (12.08-MM THK) | ||
| 9R-6849 B | [1] | RING (12.11-MM THK) | ||
| 9R-6850 B | [1] | RING (12.14-MM THK) | ||
| 9R-6924 B | [1] | RING (12.17-MM THK) | ||
| 9R-6925 B | [1] | RING (12.2-MM THK) | ||
| 9R-6926 B | [1] | RING (12.23-MM THK) | ||
| 9R-6927 B | [1] | RING (12.26-MM THK) | ||
| 9R-6928 B | [1] | RING (12.29-MM THK) | ||
| 9R-6929 B | [1] | RING (12.32-MM THK) | ||
| 9R-6930 B | [1] | RING (12.35-MM THK) | ||
| 9R-6931 B | [1] | RING (12.38-MM THK) | ||
| 8U-5669 B | [1] | SPACER (11.27-MM THK) | ||
| 8U-5670 B | [1] | SPACER (11.24-MM THK) | ||
| 8U-5671 B | [1] | SPACER (11.21-MM THK) | ||
| 8U-5672 B | [1] | SPACER (11.18-MM THK) | ||
| 8U-5673 B | [1] | SPACER (11.15-MM THK) | ||
| 128-7637 B | [1] | RING (11.12-MM THK) | ||
| 128-7638 B | [1] | RING (11.09-MM THK) | ||
| 128-7639 B | [1] | RING (11.06-MM THK) | ||
| 128-7640 B | [1] | RING (11.03-MM THK) | ||
| 128-7641 B | [1] | RING (11-MM THK) | ||
| 128-7642 | [1] | RING (10.97-MM THK) | ||
| 128-7643 B | [1] | RING (10.94-MM THK) | ||
| 67. | 9R-7002 | [1] | BEARING-TAPERED ROLLER | |
| 68. | 229-2712 | [1] | SEAL-SHAFT | |
| 69. | 9R-6985 | [1] | WASHER (27.1X50X5-MM THK) | |
| 70. | 5W-5352 M | [1] | NUT (M27X1.5-THD) | |
| 71. | 5W-5398 | [1] | WASHER-RETAINING | |
| 72. | 5W-5666 | [1] | FLANGE | |
| 73. | 229-2711 | [1] | PLATE-DEFLECTOR | |
| 74. | 121-7625 | [1] | CASE | |
| 75. | 9R-6964 | [2] | GEAR-DIFFERENTIAL | |
| 76. | 6T-5749 | [2] | WASHER-THRUST | |
| 77. | 128-7855 | [4] | GEAR-PINION | |
| 78. | 9R-6994 | [4] | WASHER-THRUST | |
| 79. | 9R-6993 | [1] | SPIDER | |
| 80. | 8T-2323 M | [12] | BOLT-SOCKET HEAD (M12X1.5X120-MM) | |
| 81. | 9R-6819 | [12] | WASHER (13X21.9X3-MM THK) | |
| 82. | 8T-2450 | [4] | PIN-SPRING | |
| 83. | 9R-6962 | [4] | PIN-CLAMPING | |
| 84. | 121-7681 | [1] | HOUSING-AXLE | |
| 85. | 121-7682 | [1] | HOUSING-AXLE | |
| 86. | 121-7676 | [2] | SHAFT-AXLE | |
| 87. | 121-7675 | [4] | BUSHING | |
| 88. | 164-2657 | [1] | TIE ROD GP (LH) | |
| 5W-5374 | [1] | ROD AS | ||
| 8U-9402 | [1] | CLAMP | ||
| 89. | 164-2658 | [1] | TIE ROD GP (RH) | |
| 5W-5374 | [1] | ROD AS | ||
| 8U-9402 | [1] | CLAMP | ||
| 90. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 | [2] | SHIM (1.95-MM THK) | ||
| 132. | 9R-7003 | [1] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2942 | [1] | BEARING-TAPERED ROLLER | |
| 134. | 6Y-2943 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 135. | 5W-5475 | [1] | SEAL-O-RING | |
| 136. | 5W-5627 M | [16] | BOLT (M18X2.5X60-MM) | |
| 137. | 5W-5531 | [16] | WASHER (19X30X3-MM THK) | |
| 138. | 9X-0798 | [1] | PLUG | |
| 139. | 203-0215 | [4] | SEAL-O-RING | |
| 140. | 5W-6076 | [1] | BOLT | |
| 141. | 9R-6948 | [4] | CLIP | |
| 142. | 175-4073 | [2] | BUSHING-SLEEVE | |
| 143. | 9R-6996 | [4] | SEAL | |
| 145. | 121-7669 | [1] | HOUSING GP-AXLE (LH) | |
| 211-7104 | NUT (M95X1.5-THD) | |||
| 146. | 121-7670 | [1] | HOUSING GP-AXLE (RH) | |
| 211-7104 | [1] | NUT (M95X1.5-THD) | ||
| 147. | 4D-8648 | [4] | CUP-BEARING | |
| 148. | 6V-2652 | [4] | CONE-BEARING | |
| 149. | 110-0858 | [4] | CAP-SEALING | |
| 150. | 110-4743 | [4] | SEAL-O-RING | |
| 151. | 121-7659 B | [2] | SHIM (0.6-MM THK) | |
| 121-7661 B | [2] | SHIM (0.8-MM THK) | ||
| 121-7662 B | [2] | SHIM (1-MM THK) | ||
| 121-7663 B | [2] | SHIM (1.2-MM THK) | ||
| 121-7665 B | [2] | SHIM (1.6-MM THK) | ||
| 121-7667 B | [2] | SHIM (2-MM THK) | ||
| 157. | 110-0860 | [4] | PIN-BEARING | |
| 158. | 8T-4779 M | [16] | BOLT (M16X2X35-MM) | |
| 159. | 128-7867 | [4] | FITTING-HYDRAULIC | |
| 160. | 220-2593 | [2] | BUSHING-SLEEVE | |
| 161. | 121-7657 Y | [2] | UNIVERSAL JOINT GP | |
| 162. | 121-7656 | [2] | FITTING | |
| 163. | 7X-5804 | [2] | SEAL-O-RING | |
| 164. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 165. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [2] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 174. | 5W-7640 | [2] | SCREW | |
| 175. | 6R-5257 | [2] | SEAL AS | |
| 176. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 177. | 178-8608 | [2] | CONE-TAPERED | |
| 178. | 8U-0747 B | [2] | SPACER (109.7X120.3X15.2-MM THK) | |
| 8U-0748 B | [2] | SPACER (109.7X120.3X15-MM THK) | ||
| 8U-0749 B | [2] | SPACER (109.7X120.3X14.8-MM THK) | ||
| 8U-0750 B | [2] | SPACER (109.7X120.3X14.6-MM THK) | ||
| 8U-0751 B | [2] | SPACER (109.7X120.3X14.4-MM THK) | ||
| 8U-0752 B | [2] | SPACER (109.7X120.3X14.2-MM THK) | ||
| 8U-0753 B | [2] | SPACER (109.7X120.3X14-MM THK) | ||
| 121-7642 B | [2] | SPACER (109.7X120.3X14.42-MM THK) | ||
| 121-7643 B | [2] | SPACER (109.7X120.3X14.45-MM THK) | ||
| 121-7644 B | [2] | SPACER (109.7X120.3X14.48-MM THK) | ||
| 121-7645 B | [2] | SPACER (109.7X120.3X14.51-MM THK) | ||
| 121-7646 B | [2] | SPACER (109.7X120.3X14.54-MM THK) | ||
| 190. | 2S-0479 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 191. | 8U-5722 | [2] | FLANGE | |
| 192. | 5W-6845 | [2] | SEAL-O-RING | |
| 193. | 5W-5480 | [4] | SEAL-O-RING | |
| 194. | 5W-7320 | [2] | RING | |
| 195. | 223-7967 | [2] | GEAR | |
| 196. | 121-7640 | [2] | PISTON-BRAKE | |
| 197. | 121-7639 | [4] | RING | |
| 198. | 121-7638 | [2] | RING | |
| 199. | 121-7637 | [2] | RING-BACKUP | |
| 200. | 8U-5698 | [2] | PLATE-WASHER | |
| 201. | 8U-3592 | [12] | SPRING | |
| 202. | 8U-3594 | [12] | NUT | |
| 203. | 121-7636 M | [12] | BOLT (M6X1X40-MM) | |
| 204. | 8U-3591 | [12] | SPACER (6.5X15X7-MM THK) | |
| 205. | 121-7635 | [10] | DISC-GEAR (2-MM THK) | |
| 206. | 121-7634 | [10] | DISC-GEAR (2.5-MM THK) | |
| 207. | 121-7633 | [10] | DISC-GEAR (3-MM THK) | |
| 208. | 121-7632 | [8] | DISC-FRICTION | |
| 209. | 132-3693 | [2] | WASHER | |
| 210. | 121-7631 | [2] | RING-RETAINING | |
| 211. | 8U-0746 | [2] | WASHER-THRUST | |
| 212. | 121-7628 | [2] | HOUSING-DRIVE | |
| 213. | 9R-6950 | [8] | PINION-PLANETARY | |
| 214. | 121-7627 | [8] | BEARING-ROLLER | |
| 215. | 9R-6949 | [16] | RING | |
| 216. | 8T-2355 | [8] | RING-RETAINING | |
| 217. | 054-6552 B | [2] | SHIM (1.5-MM THK) | |
| 054-6553 B | [2] | SHIM (2-MM THK) | ||
| 054-6554 B | [2] | SHIM (2.5-MM THK) | ||
| 054-6555 B | [2] | SHIM (3-MM THK) | ||
| 054-6556 B | [2] | SHIM (1.7-MM THK) | ||
| 054-6557 B | [2] | SHIM (2.2-MM THK) | ||
| 8U-2751 B | [2] | WASHER-THRUST | ||
| 224. | 121-7626 | [2] | PLUG | |
| 225. | 5W-2177 M | [4] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 226. | 9W-4926 | [2] | PLUG | |
| 227. | 6T-6408 | [2] | SEAL-O-RING | |
| 228. | 219-4549 | [2] | GEAR-SUN | |
| 229. | 219-4548 | [2] | GEAR-CARRIER (35-TEETH) | |
| 230. | 9R-6958 | [2] | RING-RETAINING | |
| 231. | 5W-6370 | [2] | RING-RETAINING | |
| 232. | 054-7758 | [20] | STUD | |
| 233. | 5W-5696 | [1] | CYLINDER (STEERING) | |
| 234. | 5W-4819 | [2] | SEAL-O-RING | |
| 235. | 5W-6643 | [1] | GUIDE | |
| 236. | 5W-5485 | [1] | SEAL-O-RING | |
| 237. | 5W-5483 | [2] | RING | |
| 238. | 5W-6392 | [2] | SEAL-O-RING | |
| 239. | 216-0590 | [1] | ROD AS | |
| 240. | 5W-5646 | [1] | SEAL | |
| 241. | 5W-6391 | [2] | SCRAPER | |
| 242. | 5W-5547 B | [1] | DISC (1-MM THK) | |
| 5W-5548 B | [1] | DISC (1.1-MM THK) | ||
| 5W-5549 B | [1] | DISC (1.2-MM THK) | ||
| 5W-5550 B | [1] | DISC (1.3-MM THK) | ||
| 5W-5551 B | [1] | DISC (1.4-MM THK) | ||
| 5W-5552 B | [1] | DISC (1.5-MM THK) | ||
| 5W-5553 B | [1] | DISC (1.6-MM THK) | ||
| 5W-5554 B | [1] | DISC (1.7-MM THK) | ||
| 5W-6400 B | [1] | DISC (1.8-MM THK) | ||
| 5W-5555 B | [1] | DISC (1.05-MM THK) | ||
| 5W-5556 B | [1] | DISC (1.15-MM THK) | ||
| 5W-5557 B | [1] | DISC (1.25-M THK) | ||
| 5W-5558 B | [1] | DISC (1.35-MM THK) | ||
| 5W-5559 B | [1] | DISC (1.45-MM THK) | ||
| 5W-5560 B | [1] | DISC (1.55-MM THK) | ||
| 5W-5561 B | [1] | DISC (1.65-MM THK) | ||
| 8U-2752 B | [1] | DISC (0.7-MM THK) | ||
| 8U-2753 B | [1] | DISC (0.8-MM THK) | ||
| 8U-2754 B | [1] | DISC (0.9-MM THK) | ||
| 261. | 5W-6442 | [1] | HOUSING | |
| 262. | 5W-5632 | [4] | BOLT (M14X2X100-MM) | |
| 263. | 203-0216 | [2] | SEAL-O-RING | |
| 264. | 8U-5818 | [1] | FITTING | |
| 265. | 8U-3473 | [1] | SEAL-O-RING | |
| 266. | 128-7901 | [1] | ELBOW AS | |
| 267. | 204-7841 | [2] | RING | |
| 268. | 121-7687 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
POWER TRAIN
AXLE GP
Special Instruction
Service Magazine
Caterpillar Parts SIS Catalog M312 :
Truck sale:
$24,298 USD
$15,899 USD
