HYDRAULIC SYSTEM
MOTOR GPPUMP GP
HYDRAULIC SYSTEM
MOTOR GP#SEBP28510480
176-6803: MOTOR & MTG GP-TRAVEL
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS#SEBP28510481
233-1006: MOTOR GP-GEAR
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 202-3060 | [1] | VALVE GP-SOLENOID & RELIEF (HYDRAULIC FAN MOTOR) | |
| 1A. | 5W-9436 | [1] | SEAL-O-RING | |
| 1B. | 6V-8352 | [1] | SEAL-O-RING | |
| 1C. | 202-3077 | [1] | CAP | |
| 2. | 202-4124 | [1] | BEARING GP-SELF-ALIGNING | |
| 2A. | 125-2976 M | [1] | NUT (M14X1.5-THD) | |
| 2B. | 3E-4988 | [1] | LOCKWASHER | |
| 2C. | 095-0919 | [1] | RING-RETAINING | |
| 3. | 202-3061 | [1] | KIT-SEAL (HYDRAULIC FAN MOTOR) | |
| 4. | 202-3081 | [1] | COUPLING | |
| 5. | 202-6705 M | [2] | BOLT-SOCKET HEAD (M10X1.5X120-MM) | |
| 6. | 202-6704 M | [2] | BOLT-SOCKET HEAD (M10X1.5X98-MM) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| M | METRIC PART | |||
#SEBP28510482
233-9571: MOTOR GP-GEAR
233-9571 MOTOR GP-GEAR -HYDRAULIC FAN
S/N 5HK42471-99999
PART OF 107-9665 ENGINE AR-PRIMARY
S/N 5HK42471-99999
PART OF 107-9665 ENGINE AR-PRIMARY
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 197-4858 | [1] | PLATE | |
| 2. | 233-1006 Y | [1] | MOTOR GP-GEAR (HYDRAULIC FAN) | |
| 3. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 4. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 5. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510483
123-9730: MOTOR GP-PISTON
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0940 | [1] | RING-RETAINING | |
| 2. | 115-1542 J | [1] | SEAL-SHAFT | |
| 3. | 149-3841 C | [1] | HOUSING | |
| 4. | 116-3195 | [1] | PLUG AS | |
| 8C-3093 | [1] | SEAL-O-RING | ||
| 5. | 8U-2566 | [1] | BEARING | |
| 6. | 131-4664 B | [1] | SHIM (1-MM THK) | |
| 131-4665 B | [1] | SHIM (1.05-MM THK) | ||
| 131-4666 B | [1] | SHIM (1.1-MM THK) | ||
| 131-4667 B | [1] | SHIM (1.15-MM THK) | ||
| 131-4668 B | [1] | SHIM (1.2-MM THK) | ||
| 131-4669 B | [1] | SHIM (1.25-MM THK) | ||
| 131-4670 B | [1] | SHIM (1.5-MM THK) | ||
| 131-4671 B | [1] | SHIM (1.75-MM THK) | ||
| 7. | 131-4662 B | [1] | SHIM (0.1-MM THK) | |
| 9T-6072 B | [1] | SPACER (0.3-MM THK) | ||
| 9T-8112 B | [1] | SHIM | ||
| 8. | 132-6769 | [1] | RING | |
| 9. | 8U-5508 | [1] | BEARING-ROLLER | |
| 10. | 131-4645 | [1] | SHAFT | |
| 11. | 8U-9480 | [2] | PIN | |
| 12. | 131-4646 | [2] | BEARING | |
| 13. | 131-4647 | [1] | CRADLE | |
| 14. | 121-9915 | [3] | SLEEVE | |
| 15. | 131-4648 | [9] | PISTON | |
| 16. | 131-4649 | [1] | WASHER (61X123X5.5-MM THK) | |
| 17. | 131-4650 B | [1] | PLATE (0.05-MM THK) | |
| 131-4651 B | [1] | PLATE (0.075-MM THK) | ||
| 131-4652 B | [1] | PLATE (0.1-MM THK) | ||
| 18. | 131-4663 | [1] | SHIM (6.3-MM THK) | |
| 19. | 9T-4906 | [1] | RING-RETAINING | |
| 20. | 131-4653 | [1] | PLATE | |
| 21. | 8U-3297 M | [4] | BOLT (M10X1.5X25-MM) | |
| 22. | 131-4654 B | [1] | PLATE (0.05-MM THK) | |
| 131-4655 B | [1] | PLATE (0.075-MM THK) | ||
| 131-4656 B | [1] | PLATE (0.1-MM THK) | ||
| 23. | 117-8210 C | [2] | DOWEL | |
| 24. | 131-4672 | [1] | PLATE | |
| 25. | 131-4657 | [1] | PLATE | |
| 26. | 131-4658 | [1] | HOUSING | |
| 27. | 131-4659 | [1] | WASHER (39.2X55.6X4-MM THK) | |
| 28. | 131-4660 | [1] | SPRING | |
| 29. | 131-4661 | [1] | WASHER (36.5X56.9X4-MM THK) | |
| 30. | 149-3842 C | [1] | HOUSING | |
| 31. | 117-2987 M | [8] | BOLT-SOCKET HEAD (M12X1.75X115-MM) | |
| 32. | 121-9948 Y | [1] | VALVE GP-BRAKE CONTROL | |
| 33. | 131-4674 | [2] | PIPE | |
| 34. | 121-9941 J | [2] | RING | |
| 35. | 121-9940 | [2] | WASHER (4X8X0.5-MM THK) | |
| 36. | 131-4675 J | [2] | RING | |
| 37. | 8C-3131 J | [2] | SEAL-O-RING | |
| 38. | 131-4676 | [1] | PISTON | |
| 39. | 131-4677 | [1] | PISTON | |
| 40. | 124-2939 Y | [2] | VALVE GP-RELIEF | |
| 41. | 121-9935 B | [2] | WASHER (1.5-MM THK) | |
| 121-9936 B | [2] | WASHER (1.6-MM THK) | ||
| 121-9937 B | [2] | WASHER (1.7-MM THK) | ||
| 121-9938 B | [2] | WASHER (1.8-MM THK) | ||
| 121-9939 B | [2] | WASHER (1.9-MM THK) | ||
| 42. | 102-7364 M | [2] | BOLT-SOCKET HEAD (M6X1X80-MM) | |
| 43. | 9T-6322 C | [1] | PLUG AS | |
| 44. | 131-4678 | [2] | NOZZLE | |
| 45. | 8U-5942 J | [6] | SEAL-O-RING | |
| 46. | 151-4764 C | [1] | REGULATOR GP-HOUSING | |
| 166-3718 | [1] | SEAL-O-RING | ||
| 106-9586 | [1] | SEAL-O-RING | ||
| 47. | 121-9946 | [2] | PIN | |
| 48. | 9T-4901 M | [2] | NUT (M12X1-THD) | |
| 49. | 095-0674 M | [9] | BOLT-SOCKET HEAD (M12X1.75X65-MM) | |
| 50. | 6V-5192 M | [4] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 51. | 169-1560 | [2] | BOLT | |
| AVAILABLE REPAIR KIT(S): | ||||
| 131-4682 J | [1] | KIT-SEAL | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT(S) MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510484
123-9730: MOTOR GP-PISTON
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0940 | [1] | RING-RETAINING | |
| 2. | 115-1542 J | [1] | SEAL-SHAFT | |
| 3. | 149-3841 | [1] | HOUSING | |
| 4. | 116-3195 | [1] | PLUG AS | |
| 8C-3093 | [1] | SEAL-O-RING | ||
| 8. | 132-6769 | [1] | RING | |
| 9. | 8U-5508 | [1] | BEARING-ROLLER | |
| 10. | 131-4645 | [1] | SHAFT | |
| 11. | 8U-9480 | [2] | PIN | |
| 12. | 131-4646 | [2] | BEARING | |
| 13. | 131-4647 | [1] | CRADLE | |
| 14. | 121-9915 | [3] | SLEEVE | |
| 15. | 131-4648 | [9] | PISTON | |
| 16. | 131-4649 | [1] | WASHER (61X123X5.5-MM THK) | |
| 17. | 131-4650 B | [1] | PLATE (0.05-MM THK) | |
| 18. | 131-4651 B | [1] | PLATE (0.075-MM THK) | |
| 19. | 131-4652 B | [1] | PLATE (0.1-MM THK) | |
| 20. | 131-4653 | [1] | PLATE | |
| 21. | 8U-3297 M | [4] | BOLT (M10X1.5X25-MM) | |
| 22. | 131-4654 B | [1] | PLATE (0.05-MM THK) | |
| 23. | 131-4655 B | [1] | PLATE (0.075-MM THK) | |
| 24. | B | [1] | CAP | |
| 25. | 131-4657 | [1] | PLATE | |
| 26. | 131-4658 | [1] | HOUSING | |
| 27. | 131-4659 | [1] | WASHER (39.2X55.6X4-MM THK) | |
| 28. | 131-4660 | [1] | SPRING | |
| 29. | 131-4661 | [1] | WASHER (36.5X56.9X4-MM THK) | |
| 30. | 131-4662 B | [1] | SHIM (0.1-MM THK) | |
| 31. | 9T-6072 B | [1] | SPACER (0.3-MM THK) | |
| 32. | 9T-8112 B | [1] | SHIM | |
| 33. | 9T-4906 | [1] | RING-RETAINING | |
| 34. | 131-4663 | [1] | SHIM (6.3-MM THK) | |
| 35. | 8U-2566 | [1] | BEARING | |
| 36. | 131-4664 B | [1] | SHIM (1-MM THK) | |
| 37. | 131-4665 B | [1] | SHIM (1.05-MM THK) | |
| 38. | 131-4666 B | [1] | SHIM (1.1-MM THK) | |
| 39. | 131-4667 B | [1] | SHIM (1.15-MM THK) | |
| 40. | 131-4668 B | [1] | SHIM (1.2-MM THK) | |
| 41. | 131-4669 B | [1] | SHIM (1.25-MM THK) | |
| 42. | 131-4670 B | [1] | SHIM (1.5-MM THK) | |
| 43. | 131-4671 B | [1] | SHIM (1.75-MM THK) | |
| 44. | 131-4672 | [1] | PLATE | |
| 45. | 117-8210 | [2] | DOWEL | |
| 47. | 149-3842 | [1] | HOUSING | |
| 48. | 9T-6322 | [1] | PLUG AS | |
| 8C-3082 | [1] | SEAL-O-RING | ||
| 49. | 121-9935 B | [1] | WASHER (1.5-MM THK) | |
| 50. | 121-9936 B | [1] | WASHER (1.6-MM THK) | |
| 51. | 121-9937 B | [1] | WASHER (1.7-MM THK) | |
| 52. | 121-9938 B | [1] | WASHER (1.8-MM THK) | |
| 53. | 121-9939 B | [1] | WASHER (1.9-MM THK) | |
| 54. | 121-9940 | [2] | WASHER (4X8X0.5-MM THK) | |
| 55. | 8C-3131 J | [2] | SEAL-O-RING | |
| 56. | 121-9941 J | [2] | RING | |
| 57. | 131-4674 | [2] | PIPE | |
| 58. | 131-4675 J | [2] | RING | |
| 59. | 131-4676 | [1] | PISTON | |
| 60. | 131-4677 | [1] | PISTON | |
| 62. | 121-9946 | [2] | PIN | |
| 63. | 9T-4901 M | [2] | NUT (M12X1-THD) | |
| 64. | 095-0674 M | [9] | BOLT-SOCKET HEAD (M12X1.75X65-MM) | |
| 65. | 176-6233 Y | [2] | VALVE GP-RELIEF | |
| 66. | 121-9948 Y | [1] | VALVE GP-BRAKE CONTROL | |
| 67. | 151-4764 | [1] | REGULATOR GP-HOUSING | |
| 106-9586 | [1] | SEAL-O-RING | ||
| 166-3718 | [1] | SEAL-O-RING | ||
| 68. | 8U-5942 J | [6] | SEAL-O-RING | |
| 69. | 131-4678 | [2] | NOZZLE | |
| 70. | 6V-5192 M | [4] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 71. | 169-1560 | [2] | BOLT | |
| 72. | 102-7364 M | [2] | BOLT-SOCKET HEAD (M6X1X80-MM) | |
| 73. | 117-2987 M | [8] | BOLT-SOCKET HEAD (M12X1.75X115-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 131-4682 J | [1] | KIT-SEAL | ||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510485
175-6565: MOTOR GP-PISTON
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-8121 Y | [1] | ROTATING GP-MOTOR | |
| 2. | 190-8123 Y | [1] | HEAD GP-MOTOR | |
| 3. | 126-1298 | [1] | HOUSING | |
| 4. | 9S-8005 | [1] | PLUG (3/4-16-THD) | |
| 5. | 033-6028 | [1] | SEAL-O-RING | |
| 6. | 2W-1145 | [1] | RING-RETAINING (INTERNAL) | |
| 7. | 124-9913 | [1] | SEAL-SHAFT | |
| 8. | 124-9914 | [1] | SHIM (3-MM THK) | |
| 9. | 6F-4718 | [1] | SEAL-O-RING | |
| 10. | 9S-8008 | [1] | PLUG (1-1/16-12-THD) | |
| 11. | 033-6036 | [1] | SEAL-O-RING | |
| 12. | 125-1379 M | [1] | SETSCREW-SOCKET (M12X1.75-THD) | |
| 13. | 123-4954 M | [1] | SETSCREW (M12X1.75-THD) | |
| 14. | 6E-3283 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 15. | 190-8126 Y | [1] | VALVE GP-BRAKE CONTROL | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510486
120-4713: MOTOR GP-SWING
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0939 | [1] | RING-RETAINING | |
| 2. | 125-3192 | [1] | COVER | |
| 3. | 8U-5448 J | [1] | SEAL | |
| 4. | 125-3193 | [1] | SEAL-O-RING | |
| 5. | 117-8181 | [1] | PIN | |
| 6. | 158-6360 | [1] | HOUSING | |
| 7. | 116-3195 | [2] | PLUG AS | |
| 8. | 125-3195 | [1] | RING | |
| 9. | 125-3196 | [1] | BEARING | |
| 10. | 125-3197 | [1] | SHAFT | |
| 11. | 158-6361 | [1] | WASHER | |
| 12. | 125-3199 | [7] | PISTON | |
| 13. | 125-3200 | [1] | PLATE | |
| 14. | 125-3201 B | [1] | RING | |
| 15. | 125-3202 B | [1] | RING | |
| 16. | 125-3203 B | [1] | RING | |
| 17. | 125-3204 B | [1] | RING | |
| 18. | 125-3205 B | [1] | RING | |
| 19. | 125-3206 | [1] | HOUSING | |
| 20. | 125-3207 | [1] | WASHER | |
| 21. | 125-3208 | [1] | SPRING | |
| 22. | 125-3209 | [1] | WASHER | |
| 23. | 125-3210 B | [1] | SHIM (0.1-MM THK) | |
| 24. | 125-3211 B | [1] | SHIM (0.27-MM THK) | |
| 25. | 125-3212 B | [1] | SHIM (1-MM THK) | |
| 26. | 8C-8840 | [1] | RING-RETAINING | |
| 27. | 125-3214 | [1] | WASHER | |
| 28. | 125-3215 | [1] | BEARING | |
| 29. | 137-8432 B | [1] | SHIM (1.05MM THK) | |
| 30. | 137-8433 B | [1] | SHIM (1.10MM THK) | |
| 31. | 137-8434 B | [1] | SHIM (1.15MM THK) | |
| 32. | 137-8435 B | [1] | SHIM (1.25MM THK) | |
| 33. | 125-3220 B | [1] | SHIM (1-MM THK) | |
| 34. | 125-3221 B | [1] | SHIM (1.2-MM THK) | |
| 35. | 125-3222 | [1] | PLATE | |
| 36. | 117-8210 | [2] | DOWEL | |
| 37. | 5W-1865 J | [1] | SEAL-O-RING | |
| 38. | 125-3223 | [1] | HOUSING | |
| 39. | 095-0655 M | [4] | BOLT-SOCKET HEAD | |
| 40. | 105-6148 | [1] | VALVE GP-SHUTTLE | |
| 41. | 117-8215 | [1] | VALVE AS | |
| 5W-7476 | [1] | BALL | ||
| 5W-7478 | [1] | WASHER (3X6X0.1-MM THK) | ||
| 5W-7479 | [1] | WASHER (3X6X0.5-MM THK) | ||
| 117-8216 | [1] | SEAL-O-RING | ||
| 117-8231 | [1] | SPRING | ||
| 121-9739 | [1] | KIT-REPAIR | ||
| 42. | 137-8436 B | [1] | SHIM (1.5MM THK) | |
| 43. | 137-8437 B | [1] | SHIM | |
| AVAILABLE REPAIR KIT(S): | ||||
| 125-3224 J | [1] | KIT-SEAL | ||
| B | USE AS REQUIRED | |||
| J | KIT(S) MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP28510487
152-7374: MOTOR GP-SWING
Parts for your M312 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 157-0422 Y | [1] | ROTATING GP-MOTOR | |
| 2. | 157-0423 | [1] | HOUSING-MOTOR | |
| 3. | 157-0424 | [1] | PLATE-PORT | |
| 4. | 099-3095 | [1] | DOWEL | |
| 5. | 6J-2244 | [1] | SEAL-O-RING | |
| 6. | 105-3481 M | [6] | BOLT-SOCKET HEAD (M8X1.25X20-MM) | |
| 7. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 8. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28510488
118-9168: PUMP & MOTOR GP-STEERING
118-9168 PUMP & MOTOR GP-STEERING -SECONDARY
S/N 6TL410-UP
PART OF 148-2319 STEERING GP-HYDRAULIC
AN ATTACHMENT
S/N 6TL410-UP
PART OF 148-2319 STEERING GP-HYDRAULIC
AN ATTACHMENT
#SEBP28510489
117-8023: PUMP & MTG GP-MAIN HYDRAULIC
117-8023 PUMP & MTG GP-MAIN HYDRAULIC
S/N 6TL410-UP
PART OF 123-9733 HYDRAULIC AR-UPPER
S/N 6TL410-UP
PART OF 123-9733 HYDRAULIC AR-UPPER
Parts for your M312 EXCAVATOR:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
MOTOR GP
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Caterpillar Parts SIS Catalog M312 :
Truck sale:
$24,298 USD
$15,899 USD


