AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

150-7060 WIRING GP-MACHINE S/N 7ML1061-1064; 7ML1161-1161; 7ML1215-1646 PART OF 117-7958 OPERATOR AR M315


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

EXCAVATOR M315 EXCAVATOR 7ML
 M315 Excavator 7ML00860-UP (MACHINE) POWERED BY 3054 Engine SEBP2852 M315 7ML   (1988)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ELECTRONIC CONTROL
123-4789 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
179-9037 WIRING GP-ELECTRONIC CONTROL
WIRING GP-MACHINE
150-7060 WIRING GP-MACHINE
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM
WIRING GP-PLATFORM
179-9030 WIRING GP-PLATFORM
WIRING GP-PLATFORM
179-9051 WIRING GP-PLATFORM
 

#SEBP28520220
 

150-7060: WIRING GP-MACHINE

150-7060 WIRING GP-MACHINE
S/N 7ML1061-1064; 7ML1161-1161; 7ML1215-1646
PART OF 117-7958 OPERATOR AR
i00798536 SEBP2852
1507060 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6680 [1] SENSOR AS-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E [1] SLEEVE (14CM)  
2. 175-3349 [1] RECEPTACLE AS  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 5C-9553 M [2] BOLT (M6X1X16-MM)  
5. 8T-4171 M [3] BOLT (M6X1X12-MM)  
6. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 117-3188 [1] COVER  
8. 117-3190 [1] CONNECTOR (4-PIN)  
9. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
10. 122-4695 [1] BRACKET  
11. 124-0329 [2] RESISTOR  
12. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL LOCK)  
  8U-2381 [3] WASHER (13X19X1.5-MM THK)  
13. 145-9205 [1] PLATE AS  
14. 146-0678 [1] ROD  
15. 166-3897 [1] PLATE AS  
16. 166-3896 [1] LEVER AS  
17. 149-7606 [1] CONTROL GP-MACHINE (ENGINE, HYDRAULIC)  
  143-4781 [1] BRACKET AS  
  5W-1453 [2] LOCKWASHER  
  099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
18. 150-4461 [1] PLATE AS  
19. 150-4463 [1] HARNESS AS  
20. 150-4464 [1] WIRE AS  
21. 150-4465 [1] HARNESS AS  
22. 150-9277 [1] PLATE  
23. 150-9354 [1] HARNESS AS  
24. 151-1032 [1] MOTOR AS-GOVERNOR  
25. 151-1954 [3] MOUNT AS  
26. 166-3899 [1] SPRING  
27. 155-7862 [1] BALL JOINT AS  
28. 155-7863 [1] BALL JOINT AS  
29. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
30. 166-5812 M [1] LOCKNUT  
31. 139-6903 M [1] NUT (M6X1-THD)  
32. 3C-6969 M [4] NUT (M3X0.5-THD)  
33. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
34. 5C-2890 M [1] NUT (M6X1-THD)  
35. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
36. 7X-2535 M [1] BOLT (M6X1X60-MM)  
37. 8T-0087 [2] LOCKWASHER  
38. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
41. 5A-3604 M [2] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
42. 9X-6032 M [1] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
43. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
44. 096-0061 B [15] STRAP-CABLE  
45. 6V-8397 [2] SEAL-O-RING  
46. 6V-9829 [2] CAP (ORFS)  
47. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28520221
 

123-9719: WIRING GP-PLATFORM

123-9719 WIRING GP-PLATFORM
S/N 7ML860-1646
PART OF 117-7955 CHASSIS AR
i00516071 SEBP2852
1239719 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3357 [1] RECEPTACLE AS  
2. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
3. 5W-6315 [1] FITTING  
4. 164-8366 [1] COVER  
5. 5W-9376 [1] SWITCH AS (AIR HORN)  
6. 8U-2598 Y [1] WASHER GP-WINDOW  
7. 8U-6109 [1] SWITCH-BRAKE  
8. 8X-9618 [1] STRAP AS-GROUND  
9. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 140-9123 C [1] HARNESS AS-PLATFORM  
11. 099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
12. 2W-9513 M [2] BOLT (M6X1X10-MM)  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 5C-8917 CM [2] SCREW (M6X8-MM)  
15. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 5P-8131 [1] GROMMET  
17. 6P-4467 [1] GROMMET  
18. 5P-0715 DC HOSE (2.6M)  
19. 139-2350 C [6] STRAP-CABLE  
21. 3F-9556 [2] LOCKWASHER  
  096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28520222
 

179-9030: WIRING GP-PLATFORM

179-9030 WIRING GP-PLATFORM
S/N 7ML1647-UP
PART OF 134-3727 RISER AR-CAB
AN ATTACHMENT
i01295832 SEBP2852
1799030 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
2. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
3. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 8T-8737 [1] PLUG-SEAL  
5. 116-7317 [1] PLATE  
6. 133-6424 [1] HARNESS AS-CAB  
7. 134-2213 [1] BRACKET  
8. 134-2822 [1] HARNESS AS-CAB  
9. 148-6339 [1] HARNESS AS  
10. 175-3355 [1] RECEPTACLE AS-CONNECTOR  
11. 179-9074 [1] HARNESS AS  
12. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
13. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
15. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
16. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
18. 8D-9947 [2] CLIP  
19. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
20. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
21. 096-0061 B [20] STRAP-CABLE  
22. 144-0195 E HOSE (445CM)  
23. 128-1423 E SEAL (5CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28520223
 

179-9051: WIRING GP-PLATFORM

179-9051 WIRING GP-PLATFORM
S/N 7ML1647-UP
PART OF 117-7958 OPERATOR AR
i01217929 SEBP2852
1799051 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-1987 [2] TERMINAL-BLADE (12-GA TO 16-GA)  
2. 5W-1992 [4] TERMINAL  
3. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
4. 6A-5275 [2] CONNECTOR  
5. 6A-5276 [1] CONNECTOR  
6. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
7. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
8. 116-7317 [1] PLATE  
9. 117-3187 [1] SWITCH AS (START, PILOT)  
10. 139-2350 [1] STRAP-CABLE  
11. 139-2351 [3] STRAP-CABLE  
12. 144-0629 [1] PLATE  
13. 144-0630 [1] PLATE  
14. 179-9056 [1] HARNESS AS  
15. 125-6083 [1] SCREW-PAN HEAD  
16. 130-8268 [2] SCREW-PAN HEAD  
17. 142-8545 M [1] BOLT (M16X2X20-MM)  
18. 3H-2900 [1] GROMMET  
19. 5C-2874 M [3] NUT (M5X0.8-THD)  
20. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
21. 8T-4138 M [2] BOLT (M6X1X20-MM)  
22. 9X-8244 M [1] LOCKNUT (M16X2-THD)  
23. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
24. 9X-6772 B [5] STRAP-CABLE  
25. 128-1423 E SEAL (42CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28520224
 

179-9066: WIRING GP-PLATFORM

179-9066 WIRING GP-PLATFORM
S/N 7ML1647-UP
PART OF 117-7955 CHASSIS AR
i01218732 SEBP2852
1799066 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
2. 5W-9376 [1] SWITCH AS (AIR HORN)  
3. 7Y-3474 [1] VALVE AS-CHECK (WINDOW WASHER)  
4. 8X-9618 [1] STRAP AS-GROUND  
5. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  5W-8893 [1] LEVER GP  
  5W-9010 [1] COVER  
  5P-5623 [1] WIRE-ELECTRICAL (16-GA, BLACK)  
  5W-9278 [1] TERMINAL  
  5W-9281 [9] SLEEVE  
  9N-8100 [1] CONNECTOR  
  5W-9289 [1] SPACER  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 139-2350 [6] STRAP-CABLE  
7. 175-3357 [1] RECEPTACLE AS  
8. 178-3780 Y [1] WASHER GP-WINDOW  
9. 179-9069 [1] HARNESS AS-PLATFORM  
10. 180-4996 [1] FITTING  
11. 180-8137 [1] HARNESS AS  
12. 2W-9513 M [2] BOLT (M6X1X10-MM)  
13. 3F-9556 [2] LOCKWASHER  
14. 3P-5414 [2] GROMMET  
15. 5C-7261 M [2] NUT (M8X1.25-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 8T-4171 M [3] BOLT (M6X1X12-MM)  
18. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
20. 144-0195 E HOSE (292 CM)  
   
  096-0061 BF [5] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28520225
 

141-3995: WIRING GP-PRIORITY VALVE

141-3995 WIRING GP-PRIORITY VALVE
S/N 7ML860-UP
PART OF 151-5181, 151-5182, 151-5183, 151-5184, 151-5185 VALVE & LINES GP-PRIORITY
AN ATTACHMENT
i00501387 SEBP2852
1413995 WIRING GP-PRIORITY VALVE Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8327 [1] SWITCH-KEY (PRIORITY VALVE)  
2. 148-6631 [1] HARNESS AS  
3. 149-1028 [1] PLATE (PRIORITY)  
4. 096-0061 B [10] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP28520226
 

175-1245: WIRING GP-QUICK COUPLER

175-1245 WIRING GP-QUICK COUPLER
S/N 7ML860-UP
PART OF 175-1237 CONTROL AR-COUPLER
AN ATTACHMENT
i01504047 SEBP2852
1751245 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-9668 [1] CONSOLE GP-INSTRUMENT  
2. 178-8344 [2] PLATE  
3. 178-8345 [1] PLATE  
4. 178-8346 [1] PLATE  
5. 179-6239 [1] HARNESS AS  
6. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
7. 3P-5414 [1] GROMMET  
8. 5C-2890 M [4] NUT (M6X1-THD)  
9. 5C-8312 M [4] NUT (M4X0.7-THD)  
10. 8T-3998 M [4] BOLT (M4X0.7X12-MM)  
11. 8T-4138 M [4] BOLT (M6X1X20-MM)  
12. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
   
  096-0061 BF [10] STRAP-CABLE  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP28520227
 

121-9144: WIRING GP-SECONDARY STEERING

121-9144 WIRING GP-SECONDARY STEERING
S/N 7ML860-UP
PART OF 127-1481 STEERING AR-SECONDARY
AN ATTACHMENT
i00487377 SEBP2852
1219144 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0075 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(SUPPLEMENTAL STEER)  
2. 117-4861 C [1] RELAY AS  
3. 122-2364 [1] WIRE AS  
4. 132-6640 CY [1] CONTROL GP-SECONDARY STEERING  
5. 155-2276 [1] WEDGE-PLUG LOCK (3-PIN)  
6. 175-3350 [1] PLUG AS-CONNECTOR  
7. 179-9050 C [1] HARNESS AS  
8. 096-4835 CM [2] BOLT-SOCKET HEAD (M10X1.5X16-MM)  
9. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4171 M [2] BOLT (M6X1X12-MM)  
11. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
12. 096-0061 B [15] STRAP-CABLE  
13. 186-3736 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28520228
 

121-2452: WIRING GP-UNDERCARRIAGE/SWIVEL

121-2452 WIRING GP-UNDERCARRIAGE/SWIVEL
S/N 7ML860-UP
PART OF 120-0433 STABILIZER AR
AN ATTACHMENT
i00480570 SEBP2852
1212452 WIRING GP-UNDERCARRIAGE/SWIVEL Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-3624 [1] TERMINAL  
2. 8U-1639 [1] CAM AS  
3. 121-2972 [1] HARNESS AS  
4. 121-2974 Y [1] SWITCH GP-SWIVEL  
5. 8T-0337 M [4] SCREW-MACHINE (M4X0.7X12-MM)  
6. 5C-9553 M [2] BOLT (M6X1X16-MM)  
7. 9X-6772 B STRAP-CABLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28520229
 

111-1883: AXLE & MTG AR-FRONT

111-1883 AXLE & MTG AR-FRONT
S/N 7ML860-UP
PART OF 120-0297 POWER TRAIN AR
i00476844 SEBP2852
1111883 AXLE & MTG AR-FRONT Parts scheme
  For full view, you need register

Parts for your M315 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 110-2170 [1] PIN  
3. 111-1230 [2] PLATE AS  
4. 112-4533 Y [1] AXLE AR-FRONT  
5. 8T-4132 M [1] NUT (M16X2-THD)  
6. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
7. 6V-5844 M [8] BOLT (M16X2X35-MM)  
8. 8T-0282 M [1] BOLT (M16X2X120-MM)  
9. 163-7180 B [1] SHIM (0.5-MM THK)  
10. 5W-5694 [20] RING  
11. 9X-0641 [20] WASHER  
12. 9X-0642 [20] NUT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog M315 :

WIRING GP-ELECTRONIC CONTROL
179-9037 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
123-4789 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CONSOLE
159-0012 WIRING GP-CONSOLE
WIRING GP-CONSOLE
117-7959 WIRING GP-CONSOLE
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-AIR CONDITIONER
172-3700 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
156-5503 WIRING GP-AIR CONDITIONER
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM
WIRING GP-PLATFORM
179-9030 WIRING GP-PLATFORM
WIRING GP-PLATFORM
179-9051 WIRING GP-PLATFORM
WIRING GP-PLATFORM
179-9066 WIRING GP-PLATFORM
WIRING GP-PRIORITY VALVE
141-3995 WIRING GP-PRIORITY VALVE
WIRING GP-QUICK COUPLER
175-1245 WIRING GP-QUICK COUPLER
WIRING GP-SECONDARY STEERING
121-9144 WIRING GP-SECONDARY STEERING
WIRING GP-UNDERCARRIAGE/SWIVEL
121-2452 WIRING GP-UNDERCARRIAGE/SWIVEL

Truck sale:

Caterpillar M315, Construction
On Request 
Caterpillar M315, Construction
- wheel excavator
PON EQUIPMENT A/S (DENMARK)
Denmark
 
 
Caterpillar M315F, Construction
- wheel excavator
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar M315F, Construction
152,469 
Caterpillar M315F, Construction
- wheel excavator
PON EQUIPMENT B.V. (NETHERLANDS)
Netherlands
Caterpillar M315, Construction
42,500 
Caterpillar M315, Construction
- wheel excavator
FABICK CAT
Caterpillar M315F, Construction
275,000 
Caterpillar M315F, Construction
- wheel excavator
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.