BASIC ENGINE
DRIVE GP-PUMPHOUSING GP-FLYWHEEL
FUEL SYSTEM
FILTER GP-FUELBASIC ENGINE
DRIVE GP-PUMP
#SEBP28650240
125-3431: DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS1-211
S/N 9KS1-211
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 162-0149 CY | [1] | DRIVE GP-UNIT INJ HYD PUMP | |
| 2. | 6V-3549 | [1] | SEAL-O-RING | |
| 3. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 4. | 103-6093 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 5. | 9X-0261 | [1] | ADAPTER | |
| 6. | 6V-5048 | [1] | SEAL-O-RING | |
| 7. | 6V-5049 | [1] | SEAL-O-RING | |
| 8. | 118-6335 | [1] | PIN | |
| 9. | 6V-4589 | [1] | SEAL-O-RING | |
| 10. | 5P-9890 | [2] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28650241
125-3431: DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS212-376
S/N 9KS212-376
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 162-0149 Y | [1] | DRIVE GP-UNIT INJ HYD PUMP | |
| 2. | 6V-3549 | [1] | SEAL-O-RING | |
| 3. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 4. | 161-9926 CY | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 5. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 6V-5049 | [1] | SEAL-O-RING | |
| 8. | 118-6335 | [1] | PIN | |
| 9. | 6V-4589 | [1] | SEAL-O-RING | |
| 10. | 5P-9890 | [2] | SEAL-O-RING | |
| 11. | 9X-0261 | [1] | ADAPTER | |
| 12. | 6V-5048 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28650242
125-3431: DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS377-739
S/N 9KS377-739
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 162-0149 Y | [1] | DRIVE GP-UNIT INJ HYD PUMP | |
| 2. | 6V-3549 | [1] | SEAL-O-RING | |
| 3. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 4. | 161-9925 CY | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 5. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 6V-5049 | [1] | SEAL-O-RING | |
| 8. | 118-6335 | [1] | PIN | |
| 9. | 6V-4589 | [1] | SEAL-O-RING | |
| 10. | 5P-9890 | [2] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28650243
125-3431: DRIVE GP-UNIT INJ HYD PUMP
125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS740-UP
S/N 9KS740-UP
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-6644 CY | [1] | DRIVE GP-UNIT INJ HYD PUMP | |
| 2. | 6V-3549 | [1] | SEAL-O-RING | |
| 3. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 4. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC AIR) | |
| 5. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 6V-5049 | [1] | SEAL-O-RING | |
| 8. | 118-6335 | [1] | PIN | |
| 9. | 6V-4589 | [1] | SEAL-O-RING | |
| 10. | 5P-9890 | [2] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28650244
162-0149: DRIVE GP-UNIT INJ HYD PUMP
162-0149 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS1-739
PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS1-739
PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 162-0153 | [1] | SHAFT AS | |
| 3S-6605 | [1] | PLUG-CUP | ||
| 2. | 150-2392 | [1] | PLATE-THRUST | |
| 3. | 106-3027 | [1] | GASKET | |
| 4. | 162-0158 | [1] | HOUSING AS | |
| 2H-1190 | [2] | DOWEL | ||
| 162-0151 | [1] | BUSHING (38.1-MM OD) | ||
| 162-0152 | [1] | BUSHING (94.8-MM OD) | ||
| 5. | 162-0160 | [1] | HOUSING AS | |
| 2A-3746 | [1] | PLUG-CUP | ||
| 162-0150 | [1] | BUSHING (28.7-MM OD) | ||
| 162-0151 | [1] | BUSHING (38.1-MM OD) | ||
| 6. | 0S-1617 | [2] | BOLT (5/16-18X0.75-IN) | |
| 7. | 125-5835 | [1] | PLUG-FELT (UNIT INJECTOR HYDRAULIC PUMP) | |
| 8. | 1B-9575 | [4] | BOLT (5/16-18X1.56-IN) | |
| 9. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 10. | 9N-0869 | [2] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 11. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 12. | 6V-5049 | [1] | SEAL-O-RING | |
| 13. | 1D-4541 | [2] | BOLT (5/16-18X3-IN) | |
| 14. | 8M-6802 | [3] | SCREW-HEX SOCKET (1/4-20X1-IN) | |
| 15. | 162-0155 | [1] | GEAR-PUMP DRIVE (18-TEETH) | |
| 16. | 124-6640 | [1] | PLATE |
#SEBP28650245
180-6644: DRIVE GP-UNIT INJ HYD PUMP
180-6644 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS740-UP
PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP
S/N 9KS740-UP
PART OF 125-3431 DRIVE GP-UNIT INJ HYD PUMP
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-6645 | [1] | SHAFT AS | |
| 1A. | 3S-6605 | [1] | PLUG-CUP | |
| 2. | 150-2392 | [1] | PLATE-THRUST | |
| 3. | 180-6646 | [1] | GASKET | |
| 4. | 180-6647 | [1] | HOUSING AS | |
| 4A. | 2H-1190 | [2] | DOWEL | |
| 4B. | 162-0151 | [1] | BUSHING (38.1-MM OD) | |
| 4C. | 162-0152 | [1] | BUSHING (94.8-MM OD) | |
| 5. | 162-0160 | [1] | HOUSING AS | |
| 5A. | 2A-3746 | [1] | PLUG-CUP | |
| 5B. | 162-0150 | [1] | BUSHING (28.7-MM OD) | |
| 5C. | 162-0151 | [1] | BUSHING (38.1-MM OD) | |
| 6. | 125-5835 | [1] | PLUG-FELT (UNIT INJECTOR HYDRAULIC PUMP) | |
| 7. | 1B-9575 | [4] | BOLT (5/16-18X1.56-IN) | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 9N-0869 | [2] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 10. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 11. | 6V-5049 | [1] | SEAL-O-RING | |
| 12. | 1D-4541 | [2] | BOLT (5/16-18X3-IN) | |
| 13. | 8M-6802 | [3] | SCREW-HEX SOCKET (1/4-20X1-IN) | |
| 14. | 155-6637 | [1] | GEAR-OIL DRIVE (18-TEETH) | |
| 15. | 124-6640 | [1] | PLATE | |
| 16. | 031-2701 | [2] | BOLT-LOCKING (5/16-18X1.25-IN) |
#SEBP28650246
197-8874: FASTENER GP-FUEL JUNCTION BLK
197-8874 FASTENER GP-FUEL JUNCTION BLK
FOR USE WITH RH SERVICE
CANNOT BE USED WITH WATER SEPARATOR
AN ATTACHMENT
FOR USE WITH RH SERVICE
CANNOT BE USED WITH WATER SEPARATOR
AN ATTACHMENT
For full view, you need register
#SEBP28650247
197-8875: FASTENER GP-FUEL JUNCTION BLK
197-8875 FASTENER GP-FUEL JUNCTION BLK
FOR USE WITH LH SERVICE
CANNOT BE USED WITH WATER SEPARATOR
AN ATTACHMENT
FOR USE WITH LH SERVICE
CANNOT BE USED WITH WATER SEPARATOR
AN ATTACHMENT
For full view, you need register
#SEBP28650248
151-0239: FILTER GP-FUEL
151-0239 FILTER GP-FUEL
S/N 9KS1-2000
PART OF 166-7139 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
S/N 9KS1-2000
PART OF 166-7139 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
For full view, you need register
#SEBP28650249
183-6365: FILTER GP-FUEL
183-6365 FILTER GP-FUEL
FOR USE WITH @@@@@175-7011@@@@@, @@@@@184-6905@@@@@, RH SERVICE ENGINES AND
AN ATTACHMENT
FOR USE WITH @@@@@175-7011@@@@@, @@@@@184-6905@@@@@, RH SERVICE ENGINES AND
AN ATTACHMENT
For full view, you need register
Parts for your 3412E MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0749 | [3] | FILTER-FUEL (ADVANCED EFFICIENCY) | |
| 2. | 2S-3992 | [1] | SPRING | |
| 3. | 266-0889 | [2] | INDICATOR AS (FUEL PRESSURE) | |
| 4. | 5P-5528 | [2] | BUSHING-REDUCER | |
| 6. | 6N-6248 | [1] | PLATE | |
| 7. | 6N-6249 | [1] | JUNCTION BLOCK | |
| 8. | 6N-6250 | [2] | GASKET | |
| 9. | 6N-6251 | [1] | LEVER | |
| 10. | 6N-6252 | [1] | VALVE | |
| 11. | 6N-6254 | [1] | BASE AS-FUEL FILTER | |
| 11A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 12. | 6N-6259 | [1] | BASE AS-FUEL FILTER | |
| 12A. | 9S-4167 | [2] | STUD-HOLLOW (1-14X1.47-IN) | |
| 13. | 7E-5346 | [1] | VALVE AS | |
| 14. | 127-0785 | [1] | ELBOW | |
| 15. | 168-3357 | [1] | TEE | |
| 16. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 17. | 030-7947 | [3] | ADAPTER-ELBOW | |
| 18. | 0S-1571 | [3] | BOLT (3/8-16X1.75-IN) | |
| 19. | 2D-6642 | [1] | BALL | |
| 20. | 2K-8467 | [1] | PIN-SPRING | |
| 21. | 3K-4897 | [1] | PIN-SPRING | |
| 22. | 5F-4899 | [3] | BOLT (3/8-16X5.5-IN) | |
| 23. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 5M-6213 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 25. | 5P-0840 | [2] | SEAL-O-RING | |
| 26. | 6L-3428 | [2] | SCREW-MACHINE | |
| 27. | 6V-4589 | [1] | SEAL-O-RING | |
| 28. | 6V-5048 | [3] | SEAL-O-RING | |
| 29. | 6V-5049 | [4] | SEAL-O-RING | |
| 30. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
