AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9J-3178 TIP GP-SHORT -J-250 AN ATTACHMENT 313B EXCAVATOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP
CAB GP
AIR CONDITIONER GP

EXCAVATOR 313B EXCAVATOR BAS
 313B CR EXCAVATOR BAS00001-UP (MACHINE) SEBP2869 313B BAS   (1999)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
SIDECUTTER GP
4I-7343 SIDECUTTER GP
TIP GP-LONG
9J-3169 TIP GP-LONG
TIP GP-SHORT
9J-3178 TIP GP-SHORT
 

#SEBP28690330
 

9J-3178: TIP GP-SHORT

9J-3178 TIP GP-SHORT -J-250
AN ATTACHMENT
i01208620 SEBP2869
9J3178 TIP GP-SHORT Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6259 [1] RETAINER AS  
2. 1U-3251 [1] TIP-SHORT  
3. 8E-6258 [1] PIN  
 

#SEBP28690331
 

114-8480: AIR CONDITIONER & MOUNTING GP

114-8480 AIR CONDITIONER & MOUNTING GP
S/N BAS331-UP
PART OF 114-8479 AIR CONDITIONER AR, 185-9192 AIR CONDITIONER GP
ALSO AN ATTACHMENT
i01223570 SEBP2869
1148480 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3479 [1] CLIP  
2. 125-1647 [4] LOUVER  
3. Y [1] CONTROL GP-AIR & TEMPERATURE  
4. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
5. 157-9179 Y [1] AIR CONDITIONER GP  
6. 125-1721 [1] DUCT AS  
7. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
9. 125-1648 Y [1] DUCT GP  
10. 125-1720 [1] DUCT AS  
11. 125-1843 [2] HOSE AS  
13. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
14. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
15. 125-1722 [1] DUCT  
16. 125-1723 [1] DUCT  
17. 135-8352 [1] CAP  
18. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
19. 8M-2773 [1] CLIP (LOOP)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28690332
 

114-8479: AIR CONDITIONER AR

114-8479 AIR CONDITIONER AR
AN ATTACHMENT
i01224620 SEBP2869
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8480 Y [1] AIR CONDITIONER & MOUNTING GP  
  114-8483 Y [1] COMPRESSOR GP-REFRIGERANT  
  114-8482 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  114-8481 Y [1] LINES GP-AIR CONDITIONER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28690333
 

157-9179: AIR CONDITIONER GP

157-9179 AIR CONDITIONER GP
S/N BAS331-UP
PART OF 114-8480 AIR CONDITIONER & MOUNTING GP
ALSO AN ATTACHMENT
i01223668 SEBP2869
1579179 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-2119 [1] CLIP  
2. 150-2122 [1] HOSE-AIR  
3. 150-2109 [1] COIL-EVAPORATOR  
4. 150-2130 [1] CLIP  
5. 150-2135 [1] COVER  
6. 150-2107 [1] COVER  
7. 150-2132 [1] ACTUATOR  
8. 150-2137 [1] CLIP  
9. 150-2136 [1] ROD  
10. 150-2127 [1] BRACKET  
11. 150-2103 [1] CASE  
12. 150-2114 [14] SCREW-TAPPING  
13. 150-2116 [1] INSULATOR  
14. 150-2128 [2] FILTER ELEMENT AS-CAB AIR (HEATER, AIR CONDITIONER)  
15. 150-2112 [1] SEAL  
16. 150-2125 [19] SCREW-TAPPING  
17. 150-2124 [1] RESISTOR  
18. 150-2104 [1] CASE  
19. 150-2140 [1] RELAY  
20. 150-2138 [1] BRACKET  
21. 157-9180 [1] HARNESS  
22. 150-2123 [2] RELAY  
23. 150-2121 [1] THERMOSTAT  
24. 150-2110 [1] VALVE-EXPANSION  
25. 150-2113 [1] CLIP  
26. 150-2115 [1] INSULATOR  
27. 150-2111 [1] PIPE  
28. 150-2105 [1] SHROUD  
29. 150-2106 [1] SHROUD  
30. 150-2142 [2] SCREW-TAPPING  
31. 150-2141 [2] CLIP  
32. 150-2117 [1] CORE  
33. 150-2118 [1] VALVE-WATER  
34. 150-2133 [3] SCREW-TAPPING  
35. 150-2126 [2] CLAMP  
36. 150-2129 [1] HOSE-WATER  
37. 150-2131 M [3] NUT (M8X1.25-THD)  
38. 150-2134 [1] BRACKET  
39. 150-2120 [1] BLOWER AS (AIR CONDITIONER, HEATER)  
  M   METRIC PART
 

#SEBP28690334
 

185-9192: AIR CONDITIONER GP

185-9192 AIR CONDITIONER GP
S/N BAS331-UP
PART OF 169-7988 OPERATOR AR
i02067075 SEBP2869
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8480 Y [1] AIR CONDITIONER & MOUNTING GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28690335
 

169-8006: CAB GP

169-8006 CAB GP
PART OF 169-7988 OPERATOR AR
i01226371 SEBP2869
1698006 CAB GP Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-8007 Y [1] CAB GP  
2. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
3. 8T-5001 M [1] BOLT (M12X1.75X130-MM)  
4. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
5. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
6. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28690336
 

169-8007: CAB GP

169-8007 CAB GP
PART OF 169-8006 CAB GP
i01226409 SEBP2869
1698007 CAB GP Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-8008 Y [1] CAB GP  
2. 136-0241 [1] HANDLE AS  
3. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
4. 136-0240 [1] HANDLE AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28690337
 

169-8008: CAB GP

169-8008 CAB GP
PART OF 169-8007 CAB GP
i01226413 SEBP2869
1698008 CAB GP Parts scheme 1698008 CAB GP Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-1160 [1] GLASS  
2. 162-1249 Y [1] WINDOW GP-FRONT (UPPER)  
3. [1] CAB AS  
4. 185-9055 Y [1] WIPER GP-WINDOW  
5. 162-1250 Y [1] DOOR GP-CAB  
6. 127-3926 [1] NOZZLE  
7. 127-3927 [1] STRIP  
8. 7Y-5292 M [2] SCREW-TRUSS HEAD (SELF-TAPPING)  
9. 162-1161 [1] GLASS  
10. 132-7616 [1] CUSHION  
11. 132-7573 [1] COVER  
12. 8T-0269 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
13. 099-7127 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
14. 162-1165 Y [1] FRAME GP-WINDOW  
15. 162-1162 [1] PLATE  
16. 8C-7581 M [4] SCREW-MACHINE (M4X0.7X8-MM)  
17. 127-3939 [1] SEAL  
18. 127-3940 [1] RING  
19. 8T-4224 [17] WASHER-HARD (8.8X16X2-MM THK)  
20. 6I-5342 M [4] NUT (M8X1.25-THD)  
21. 132-7575 [1] VISOR AS  
22. 162-1164 [1] GLASS  
23. 132-7617 [1] CUSHION  
24. 127-3950 [1] LINER  
25. 127-3924 [1] SEAL  
26. 127-3929 [1] STRIKER  
27. 8L-8413 [1] STRAP-CABLE (WHITE)  
28. 095-0736 M [3] SCREW-MACHINE (M5X0.8X10-MM)  
29. 127-3945 [1] PLATE (RH)  
30. 8C-7505 M [5] SCREW-FLAT HEAD (M8X1.25X20-MM)  
31. 162-1163 [1] GLASS  
32. 127-3943 [1] SEAL  
33. 127-3944 [1] HOSE  
34. 127-4006 [1] GROMMET  
35. 102-7864 [2] COVER  
36. 6V-5210 M [8] SCREW-MACHINE (M4X0.7X10-MM)  
37. 127-4005 [1] GROMMET  
38. 127-3938 [1] STRIP  
39. 121-1013 Y [1] WIRING GP-CAB  
40. 095-0728 M [3] SCREW-MACHINE (M4X0.7X12-MM)  
41. 096-6561 [1] ASHTRAY AS  
42. 136-0258 [1] GROMMET  
43. 127-3951 [1] BRACKET AS  
44. 8T-4189 M [8] BOLT (M8X1.25X20-MM)  
45. 127-3925 [1] HOOK  
46. 096-2622 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
47. 096-0721 [1] LAMP GP-DOME (CAB)  
  099-0864 [1] BODY  
  099-0865 [1] LAMP  
  099-0866 [1] COVER  
48. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 127-3992 [1] PLATE (LH)  
50. 132-7615 [1] SEAL  
51. 127-3935 [1] LOCK AS  
52. 127-3936 [1] BRACKET AS  
53. 127-3930 [1] PLATE  
54. 127-3931 [1] STRIKER  
55. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
56. 127-3932 [1] RAIL AS  
57. 127-3933 [1] PACKING  
58. 111-5494 [1] CASE  
59. 132-7618 [1] LINER  
60. 127-3947 [1] BUMPER  
61. 095-1207 M [2] NUT (M12X1.75-THD)  
62. 127-3948 [1] BRACKET  
63. 127-3922 [2] STOP  
64. 132-7576 [1] LOCK AS  
65. 127-3920 [1] PLATE  
66. 127-3919 [1] SEAL  
67. 7X-2619 M [2] BOLT (M6X1X10-MM)  
68. 127-3928 [2] STRIKER  
69. 4I-3109 M [4] BOLT  
70. 127-3956 [1] GUARD  
71. 9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
72. 136-0255 [8] FASTENER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28690338
 

114-8483: COMPRESSOR GP-REFRIGERANT

114-8483 COMPRESSOR GP-REFRIGERANT
S/N BAS331-UP
PART OF 114-8479 AIR CONDITIONER AR, 169-7993 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
i01223726 SEBP2869
1148483 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8912 M [2] BOLT (M10X1.25X30-MM)  
2. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
3. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
4. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
5. 8T-6869 M [3] BOLT (M8X1.25X60-MM)  
6. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
7. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
8. 125-1782 [1] COMPRESSOR GP-REFRIGERANT  
9. 125-1794 [1] PULLEY  
10. 125-1657 [1] PULLEY GP-IDLER (REFRIGERANT COMPRESSOR)  
  125-1646 [1] COVER  
  150-2159 [1] SHAFT  
  150-2161 [1] COLLAR  
  150-2162 [1] BOLT (M8X1.25X100-MM)  
11. 125-1795 [1] V-BELT (INCLUDES CAB GAUGE SENDER)(COMPRESSOR GP-REFRIGERANT)  
12. 125-1796 [1] BRACKET AS  
13. 125-1708 [1] BRACKET AS  
14. 125-1737 [1] PIN  
15. 125-1802 [1] SUPPORT AS  
16. 4I-4872 [1] SPACER (8.6X18X5-MM THK)  
17. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
18. 5C-7261 M [1] NUT (M8X1.25-THD)  
19. 8T-6870 M [1] BOLT (M8X1.25X70-MM)  
20. 134-7683 [1] SUPPORT AS  
  M   METRIC PART
 

#SEBP28690339
 

114-8482: CONDENSER & MTG GP-REFRIGERANT

114-8482 CONDENSER & MTG GP-REFRIGERANT
S/N BAS331-UP
PART OF 114-8479 AIR CONDITIONER AR, 169-7993 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
i01223788 SEBP2869
1148482 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 313B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
2. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
4. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
5. 125-1824 [1] SUPPORT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
6. 125-1783 [1] CONDENSER AS  
7. 7H-3937 [4] LOCKWASHER (EXTERNAL TOOTH)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
313B CR Excavator
Special Instruction
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2006/02/06
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 313B :

TIP GP-LONG
9J-3169 TIP GP-LONG
SIDECUTTER GP
4I-7343 SIDECUTTER GP
BUCKET AS-SEVERE SERVICE ROCK
358-8646 BUCKET AS-SEVERE SERVICE ROCK
BUCKET AS-HEAVY DUTY ROCK
305-1597 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-HEAVY DUTY ROCK
229-7686 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-HEAVY DUTY ROCK
229-7679 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-HEAVY DUTY ROCK
229-7624 BUCKET AS-HEAVY DUTY ROCK
BUCKET AS-HEAVY DUTY ROCK
229-7565 BUCKET AS-HEAVY DUTY ROCK
AIR CONDITIONER & MOUNTING GP
114-8480 AIR CONDITIONER & MOUNTING GP
114-8479 AIR CONDITIONER AR
AIR CONDITIONER GP
157-9179 AIR CONDITIONER GP
185-9192 AIR CONDITIONER GP
CAB GP
169-8006 CAB GP
CAB GP
169-8007 CAB GP
CAB GP
169-8008 CAB GP
COMPRESSOR GP-REFRIGERANT
114-8483 COMPRESSOR GP-REFRIGERANT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.