AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

159-1629 BULLDOZER AR-UNIVERSAL S/N 9WP1-UP Type 2 AN ATTACHMENT D8R II TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
C-FRAME GP
KITS
BULLDOZER GP

TRACK-TYPE TRACTOR D8R II TRACK-TYPE TRACTOR 6YZ
 D8R Series II Track-Type Tractor 6YZ00001-UP (MACHINE) POWERED BY 3406E Engine SEBP2876 D8R II 6YZ   (2000)

IMPLEMENTS

BULLDOZER GP
163-9463 BULLDOZER AR-SEMI-UNIVERSAL
BULLDOZER AR-UNIVERSAL
159-1629 BULLDOZER AR-UNIVERSAL
BULLDOZER AR-UNIVERSAL
159-1629 BULLDOZER AR-UNIVERSAL
159-1633 BULLDOZER AR-UNIVERSAL
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
 

#SEBP28760740
 

159-1629: BULLDOZER AR-UNIVERSAL

159-1629 BULLDOZER AR-UNIVERSAL
S/N 9WP1-UP
Type 2
AN ATTACHMENT
i01866044 SEBP2876
1591629 BULLDOZER AR-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8788 Y [1] MOUNTING GP-CYLINDER  
2. 8E-6150 Y [1] BLADE & EDGE GP-UNIVERSAL  
3. 9W-8276 Y [1] TRUNNION GP-BULLDOZER  
4. 108-6979 Y [1] CYLINDER & LINES GP-LIFT (LH)  
5. 108-6980 Y [1] CYLINDER & LINES GP-LIFT (RH)  
6. 118-3173 Y [1] PUSH ARM GP-STABILIZER  
7. 159-0068 Y [1] LIGHTING GP-FRONT (LIFT CYLINDER)  
8. 201-5703 CY [1] LINES GP-TILT CYLINDER  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BULLDOZER)  
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP28760741
 

159-1633: BULLDOZER AR-UNIVERSAL

159-1633 BULLDOZER AR-UNIVERSAL
S/N 9WP1-UP
AN ATTACHMENT
i01614679 SEBP2876
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-6150 Y [1] BLADE & EDGE GP-UNIVERSAL  
  115-6905 Y [1] LINES GP-TILT CYLINDER  
    -OR-
  201-5703 Y [1] LINES GP-TILT CYLINDER  
  5P-4963 Y [1] PLATE & FILM GP  
  118-3173 Y [1] PUSH ARM GP-STABILIZER  
  9W-8276 Y [1] TRUNNION GP-BULLDOZER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28760742
 

159-8142: C-FRAME GP

159-8142 C-FRAME GP
S/N 9ZP1-UP
TWO PIECE
PART OF 159-8377, 159-8378 BULLDOZER AR-ANGLING
AN ATTACHMENT
i01035600 SEBP2876
1598142 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-9571 [2] KEY  
2. 193-3063 [2] CAP AS-BEARING  
3. 9W-7602 B [56] SHIM (0.8-MM THK)  
4. 237-4872 [1] PIN-PIVOT  
5. 8T-4131 M [32] NUT (M20X2.5-THD)  
6. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
7. 163-2013 [1] RETAINER  
8. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
9. 7X-2565 M [32] BOLT (M20X2.5X100-MM)  
10. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
11. 8T-4123 [64] WASHER (22X35X3.5-MM THK)  
12. 159-8143 [1] C-FRAME AS (LH)  
13. 1J-6744 [1] BEARING  
14. 1U-2533 [1] BAR  
15. 3G-9626 [1] END-JOINT  
16. 7T-5140 [1] STEP  
17. 8E-6443 [1] TRUNNION AS  
18. 8P-9770 [1] PLATE  
19. 158-3650 [3] BRACKET  
20. 159-8144 [1] C-FRAME AS (RH)  
21. 1J-6744 [1] BEARING  
22. 1U-2533 [1] BAR  
23. 7T-5140 [1] STEP  
24. 8E-6444 [1] TRUNNION AS  
25. 8P-9770 [1] PLATE  
26. 159-8939 [1] ADAPTER AS  
  [2] BUSHING  
27. 5M-6214 [1] PLUG (1/8-27 PTF)  
28. 158-3650 [3] BRACKET  
29. 9X-8258 [4] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28760743
 

166-7233: KIT-OVERPACK

166-7233 KIT-OVERPACK -RIPPER
S/N 6YZ1-UP
AN ATTACHMENT
i01038801 SEBP2876
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7X-0428 [12] BOLT (1-1/4-7X4-IN)  
  7X-2562 M [2] BOLT (M20X2.5X45-MM)  
  7X-2563 M [4] BOLT (M20X2.5X60-MM)  
  7X-2568 M [2] BOLT (M20X2.5X180-MM)  
  8T-4136 M [4] BOLT (M10X1.5X25-MM)  
  8T-4195 M [6] BOLT (M10X1.5X30-MM)  
  8T-4196 M [15] BOLT (M10X1.5X35-MM)  
  8T-5460 M [12] BOLT (M20X2.5X40-MM)  
  8T-6430 M [6] BOLT (M20X2.5X50-MM)  
  8T-7338 M [6] BOLT (M16X2X45-MM)  
  8C-8992 M [4] BOLT-LOCKING (M12X1.75X30-MM)  
  9M-2904 [9] CLAMP-HOSE  
  3G-8054 [3] CLIP (TAB)  
  3G-8057 [3] CLIP (SLOT)  
  6V-9873 [2] CONNECTOR  
  6F-4161 [2] DOWEL  
  6V-8625 [1] ELBOW  
  6V-9002 [1] ELBOW  
  1P-4576 [4] FLANGE-HALF  
  1P-4577 [9] FLANGE-HALF  
  3G-8047 [3] GROMMET  
  130-9191 [6] GROMMET  
  130-6366 [2] LINK  
  6V-7688 M [2] LOCKNUT (M20X2.5-THD)  
  8T-4131 M [4] NUT (M20X2.5-THD)  
  6J-6680 [1] PIN  
  6J-6703 [1] PIN  
  7T-4501 [1] PIN  
  7T-4502 [1] PIN  
  135-5109 [1] PIN  
  135-5113 [2] PIN  
  135-5114 [1] PIN  
  162-0390 [2] PIN  
  4T-2479 [2] PIN AS  
    (EACH INCLUDES)
  5J-3576 [1] SPRING  
  6Y-3394 [3] PIN  
  7T-7305 [6] PLATE  
  6V-9313 [2] PLUG  
  8E-4743 [3] RETAINER  
  6K-3630 [1] RING  
  7J-4169 [2] RING-SNAP  
  3E-6756 [12] SEAL-LIP TYPE  
  3E-6757 [6] SEAL-LIP TYPE  
  3J-1907 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  4J-0520 [11] SEAL-O-RING  
  4J-5267 [2] SEAL-O-RING  
  6V-8398 [4] SEAL-O-RING  
  130-1977 [9] SHIELD  
  139-2456 [2] SHIELD  
  139-2455 [2] SHIELD  
  7K-1181 [3] STRAP-CABLE  
  4T-3522 [12] WASHER (95X170X3-MM THK)  
  8T-5439 [9] WASHER-HARD (21.5X45X6-MM THK)  
  9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
  7X-0533 [12] WASHER-HARD (34X55X6-MM THK)  
  7X-0537 [1] WASHER-HARD (40.5X67X6-MM THK)  
  7X-3391 [4] WASHER-HARD (13.5X32X6-MM THK)  
  8T-4123 [2] WASHER (22X35X3.5-MM THK)  
  M   METRIC PART
 

#SEBP28760744
 

158-6398: LINK GP-STABILIZER

158-6398 LINK GP-STABILIZER
S/N 9TP1-UP; 9WP1-UP; 6YZ1-1621
PART OF 118-3173, 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i01049044 SEBP2876
1586398 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 202-4981 [1] LINK AS  
3. 6I-8676 [2] BEARING  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
6. 160-6307 [2] CAP-BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28760745
 

158-6398: LINK GP-STABILIZER

158-6398 LINK GP-STABILIZER
S/N 9TP1-UP; 9WP1-UP; 6YZ1622-UP
PART OF 118-3173, 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i02022688 SEBP2876
1586398 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 160-6307 [2] CAP-BEARING  
3. 243-3371 C [1] LINK AS  
3A. 8P-9770 [1] PLATE  
3B. 6I-8676 [2] BEARING  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28760746
 

6I-8677: LINK GP-STABILIZER

6I-8677 LINK GP-STABILIZER
S/N 9TP1-UP; 9WP1-UP
PART OF 118-3173 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00403321 SEBP2876
6I8677 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-6307 [2] CAP-BEARING  
2. 7X-2578 M [8] BOLT (M24X3X200-MM)  
  8T-4001 M [8] NUT (M24X3-THD)  
3. 6I-8675 B [52] SHIM (0.6-MM THK)  
4. 6I-8679 [1] LINK AS  
  8P-9770 [1] PLATE  
  6I-8676 [2] BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28760747
 

109-5147: PUSH ARM GP

109-5147 PUSH ARM GP
S/N 9TP1-UP; 9WP1-UP
PART OF 118-3173 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00490885 SEBP2876
1095147 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7602 B [26] SHIM (0.8-MM THK)  
2. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
3. 193-3063 [1] CAP AS-BEARING  
4. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
5. 106-0786 [1] PUSH ARM AS (LH)  
6. 8E-6172 [1] BRACKET AS  
  3G-9598 [2] BUSHING  
7. 1J-6740 [1] BEARING AS  
8. 6I-8093 [1] BRACKET AS  
9. 7T-5140 [1] STEP  
10. 8P-9770 [1] PLATE  
11. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28760748
 

158-6397: PUSH ARM GP

158-6397 PUSH ARM GP
S/N 6YZ1-UP
PART OF 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i01049013 SEBP2876
1586397 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-3063 [1] CAP AS-BEARING  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. 158-6395 [1] PUSH ARM AS (LH)  
3A. 1J-6740 [1] BEARING AS  
3B. 3G-7000 [1] BRACKET AS  
3C. 7T-5140 [1] STEP  
3D. 8E-6172 [1] BRACKET AS  
3E. 3G-9598 [2] BUSHING  
3F. [1] GUARD  
3G. 8P-9770 [1] PLATE  
4. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
5. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
6. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28760749
 

8E-6168: PUSH ARM GP

8E-6168 PUSH ARM GP
S/N 9TP1-UP; 9WP1-UP; 6YZ1-UP
PART OF 118-3173, 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00414961 SEBP2876
8E6168 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
2. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
3. 193-3063 [1] CAP AS-BEARING  
4. 8E-6169 [1] PUSH ARM AS (RH)  
5. 8E-6171 [1] BRACKET AS  
  3G-9598 [2] BUSHING  
6. 1J-6740 [1] BEARING AS  
7. 3G-7000 [1] BRACKET AS  
8. 9W-1447 [1] GUARD  
9. 7T-5140 [1] STEP  
10. 8P-9770 [1] PLATE  
11. 1U-2533 [1] BAR  
12. 9W-7602 B [26] SHIM (0.8-MM THK)  
13. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with a Single Tilt Cylinder{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with a Single Tilt Cylinder{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}

Caterpillar Parts SIS Catalog D8R II :

BULLDOZER AR-UNIVERSAL
159-1629 BULLDOZER AR-UNIVERSAL
163-9463 BULLDOZER AR-SEMI-UNIVERSAL
159-1631 BULLDOZER AR-SEMI-UNIVERSAL
BULLDOZER AR-SEMI-UNIVERSAL
159-1628 BULLDOZER AR-SEMI-UNIVERSAL
BULLDOZER AR-SEMI-UNIVERSAL
159-1628 BULLDOZER AR-SEMI-UNIVERSAL
159-8378 BULLDOZER AR-ANGLING
BULLDOZER AR-ANGLING
159-8377 BULLDOZER AR-ANGLING
BRACE GP-BULLDOZER
8E-6439 BRACE GP-BULLDOZER
159-1633 BULLDOZER AR-UNIVERSAL
C-FRAME GP
159-8142 C-FRAME GP
166-7233 KIT-OVERPACK
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
LINK GP-STABILIZER
6I-8677 LINK GP-STABILIZER
PUSH ARM GP
109-5147 PUSH ARM GP
PUSH ARM GP
158-6397 PUSH ARM GP

Truck sale:

Caterpillar D8R II
 
Caterpillar D8R II
- Crawler dozers
FINNING CANADA
 
510.000 
Caterpillar D8R II, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
125.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.