ELECTRICAL AND STARTING SYSTEM
SOLENOID GPWIRING GP
OPERATOR STATION
MONITOR GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
#SEBP28800410
122-5053: VALVE GP-SOLENOID
122-5053 VALVE GP-SOLENOID
PART OF 134-0467 PUMP GP-UNIT INJECTOR HYD
PART OF 134-0467 PUMP GP-UNIT INJECTOR HYD
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | JZ | [1] | SEAL-O-RING | |
| 2. | JZ | [1] | RING-BACKUP | |
| 3. | JZ | [1] | SPACER | |
| 4. | JZ | [1] | NUT-RETAINER (1/2-20-THD) | |
| 5. | JZ | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-1484 J | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| J | KIT MARKED J SERVICES PARTS MARKED J | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP28800411
141-5145: WIRING GP-ELECTRONIC CONTROL
141-5145 WIRING GP-ELECTRONIC CONTROL
S/N 8SZ143-UP
12 VOLT,STANDARD HEIGHT
S/N 8SZ143-UP
12 VOLT,STANDARD HEIGHT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 205-1252 | [1] | HARNESS AS (ELECTRONIC CONTROL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 2. | 4P-5918 | [2] | CLIP | |
| 3. | 3S-2093 | [15] | STRAP-CABLE | |
| 4. | 147-0286 | [1] | WIRE AS | |
| 8. | 175-2303 Y | [1] | SWITCH GP-MAGNETIC (AIR INLET HEATER RELAY) | |
| 9. | 7E-5714 | [1] | STRAP-GROUNDING | |
| 10. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 11. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 105-1797 | [7] | MOUNT | |
| 13. | 4P-7581 | [1] | CLIP | |
| 14. | 153-8920 | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS AND WEDGE) | ||||
| 15. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 16. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28800412
145-7040: WIRING GP-ELECTRONIC CONTROL
145-7040 WIRING GP-ELECTRONIC CONTROL
24 VOLT,STANDARD HEIGHT
FOR USE WITH @@@@@118-7284@@@@@
ALSO AN ATTACHMENT
24 VOLT,STANDARD HEIGHT
FOR USE WITH @@@@@118-7284@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 205-1253 | [1] | HARNESS AS (ELECTRONIC CONTROL) | |
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [42] | PLUG-SEAL | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 111-1567 | [4] | SOCKET-TERMINAL | ||
| 116-6158 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 116-6159 | [2] | SOCKET-TERMINAL | ||
| 116-6161 | [1] | CAP-CONNECTOR | ||
| 123-1198 | [2] | SOCKET-TERMINAL | ||
| 123-1199 | [1] | SEAL-CONNECTOR | ||
| 123-1200 | [1] | SEAL-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 140-7339 | [1] | PLUG-CONNECTOR | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [45] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [45] | WIRE AS (14-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS AND WEDGE) | ||||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 3S-2093 | [19] | STRAP-CABLE | |
| 4. | 147-0286 | [1] | WIRE AS | |
| 5. | 290-5562 | [1] | MOUNT (DUAL SWIVEL) | |
| 6. | 287-0569 | [1] | CLIP | |
| 7. | 4P-7581 | [1] | CLIP | |
| 8. | 175-2324 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(INLET AIR HEATER) | |
| 9. | 7E-5714 | [1] | STRAP-GROUNDING | |
| 10. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 12. | 105-1797 | [6] | MOUNT | |
| 13. | 153-8920 | [1] | HARNESS AS-ENGINE (UNIT INJECTOR) | |
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 135-5975 | [1] | GROMMET-WIRING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS AND WEDGE) | ||||
| 14. | 6V-8214 M | [2] | BOLT (M6X1X20-MM) | |
| 15. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 16. | 003-9835 | [2] | PROTECTOR | |
| 17. | 132-5789 | [1] | CLIP | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28800413
302-0416: DISPLAY GP-MONITOR
302-0416 DISPLAY GP-MONITOR -MESSENGER
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-2943 | [1] | CONTROL GP-UNPRGMED MONITOR (MESSENGER) |
#SEBP28800414
245-4846: MODULE GP-DISPLAY
245-4846 MODULE GP-DISPLAY -MESSENGER
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP28800415
247-4829: MODULE GP-DISPLAY
247-4829 MODULE GP-DISPLAY -MESSENGER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 278-0086 | [1] | HARNESS AS-MONITOR (MESSENGER DISPLAY) | |
| 092-8226 | [1] | SPLICE | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(2-CM) | |||
| 153-2707 E | CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(62-CM) | |||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 2. | 245-2943 | [1] | CONTROL GP-UNPRGMED MONITOR (MESSENGER) | |
| 267-1371 F | [1] | SOFTWARE GP-MONITOR | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP28800416
302-0417: MODULE GP-DISPLAY
302-0417 MODULE GP-DISPLAY -MESSENGER
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP28800417
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 118-6305 | [1] | FILM-WARNING (HIGH VOLTAGE, HIGH PRESSURE)(WARNING) | ||
| INSTALL ON TOP OF VALVE COVER ON LEFT HAND SIDE OF THE OIL FILL READABLE FROM H SIDE OF ENGINE. | ||||
| 124-5354 | [1] | FILM-INFORMATION (TRADEMARK) | ||
| INSTALL ON TOP FLAT SURFACE OF VALVE COVER TOWARD REAR OF ENGINE, READABLE FROM LH SIDE OF ENGINE. | ||||
| 136-9066 | [1] | FILM-INFORMATION (ENGINE OIL) | ||
| INSTALL ON LEFT HAND SIDE OF ENGINE NEXT TO WARNING LABEL. READABLE FROM THE LH SIDE OF ENGINE. | ||||
| 4P-6379 | [1] | FILM-IDENTIFICATION (FUEL FILTER) | ||
| INSTALL ON SPIN-ON FUEL FILTER. (NOT REQUIRED WHEN FILTER HAS NOT BEEN PAINTED.) | ||||
| 4P-8681 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILTER) | ||
| INSTALL ON SPIN-ON OIL FILTER. (NOT REQUIRED WHEN FILTER HAS NOT BEEN PAINTED.) | ||||
| 156-8041 | [1] | FILM-INFORMATION (DO NOT REMOVE)(DO NOT REMOVE) | ||
| INSTALL ON OIL PUMP RESERVOIR READABLE FROM LEFT SIDE OF ENGINE. | ||||
| 9M-0016 | [2] | FILM-PATENT | ||
| INSTALL 1 OF 2 ON THE FRONT COVER, & INSTALL 2 OF 2 ON THE SIDE OF THE OIL PAN. | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| INSTALL ON TOP OF VALVE COVER BELOW CAT TM ON BREATHER SIDE OF ENGINE READABLE FROM LEFT HAND SIDE OF ENGINE. | ||||
| INSTALL LAMINANT OVER SILVER FILM. | ||||
| 121-0169 | [1] | PLATE-INFORMATION (ENGINE) | ||
| INSTALL ON TOP OF VALVE COVER TOWARDS RH FRONT OF ENGINE, READABLE FROM LH SIDE OF ENGINE. | ||||
| INSTALL LAMINANT OVER SILVER FILM. | ||||
| [1] | PLATE-SERIAL NUMBER (ENGINE) | |||
| INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON LOWER RH SIDE OF CYL BLOCK. | ||||
#SEBP28800418
265-9185: KIT-GASKET
For full view, you need register
#SEBP28800419
269-9174: KIT-GASKET
269-9174 KIT-GASKET -TURBOCHARGER
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.
FOR USE WITH @@@@@179-4052@@@@@
FIELD INSTALLATION
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.
FOR USE WITH @@@@@179-4052@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-7057 | [1] | GASKET | |
| 2. | 7C-7431 | [1] | GASKET (TURBOCHARGER) | |
| 3. | 7W-2398 | [1] | GASKET (OIL DRAIN) | |
| 4. | 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 5. | 3J-1907 | [1] | SEAL-O-RING (1) | |
| 6. | 4F-7391 | [1] | SEAL-O-RING | |
| 7. | 6V-8397 | [1] | SEAL-O-RING | |
| 8. | 9M-4849 | [1] | SEAL-O-RING | |
| 9. | 418-6781 | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | |
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
Disassembly and Assembly
Caterpillar Parts SIS Catalog 3126 :
Truck sale:
On Request
